I bought MISUMI chains, but why can't I use them on my original sprocket?

Please confirm the specifications of the original sprocket and chain. Specification series number may not match. In addition, there are two specifications: A series and B series in China. The two specifications of sprocket chain are not universal.

Does the chain need routine maintenance after installation and use?

The chain needs regular maintenance after installation and use. These include daily lubricant application, confirmation of chain slack. The quality of lubrication will affect the life of the chain. Especially in recent years, high-speed use has been increasing, so it is necessary to take efficient lubrication methods.

Does the chain purchased come with joints, and if any, how many joints?

In principle, one chain comes with one joint. If the customer needs multiple joints to use, you can buy it yourself, we have separate joints to choose from. Please refer to the chain type when purchasing joints.

How to use the carrier chain?

The carrier chain can only be used for transmission, not for scenarios with large load and high positioning accuracy, please be careful!

Can the chain be cut off when it is extended?

It can be cut off. Our company has simple chain cutter available for selection.

Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(2 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-CHE40-120

Type Number of Links Number of Links type Type Max. Allowable Tension CAD Days to Ship

Specification/Dimensions

Type
- Fixed Number of Knots
- Specified Number of Knots
Clear
Number of Links(pc(s).)
120
Clear
Number of Links(Units)
[4-9998/2Units Unit(s)]
Clear
type
- C-CHE40
Clear
Type
- Standard Chains
- Joint Links, Offset Links
Clear
Max. Allowable Tension(kN)
- ~99
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day

14 Day(s) or Less

15 Day(s) or Less
Clear

Specify Alterations

Chains Nominal No.40/Joint Link

Click this image to zoom it.

Move the mouse over or click the image to zoom

Volume Discount

Check FAQ of this product (5 items)

Brand :

MiSUMi Economy

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

- Chains Nominal No.40/Joint Link from MISUMI.
- This chain type is economy series of standard chains.
- Chain nominal No. is 40 while pitch No. is 12.7 mm.
- Max. Allowable Tension of chain is 3.63 kN.
- Can be selected fixed type which the number of chain links is 120 links, circumference length is 1,524mm. Or configurable type which can be configured 4 to 9998 links (2 links increment).
- Chains are made of steel.
- This series is ISO Standard 08A (ANSI 40) roller chain and can be used in combination with our 40B series sprocket.

Economy Chains Nominal No.40/Joint Link

High TensionDurablePrecision

- Handles significant maximum allowable tension for superior durability.

- Fixed chain option or customizable lengths to fit various applications.

- Precision pitch ensures accurate meshing with compatible components.

- Engineered for reliability in demanding environments.

- Ideal for use with compatible sprockets for seamless integration.

Economy Nominal No.60 Roller Chain / Joint Link

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview of Chains

■The Chains is a flexible component composed of inner Chains plates, sleeves, rollers, pins, outer Chains plates and other matched combination parts. All Chains used on machinery, mechanisms and machines are referred to as industrial Chains. The roller part of the Chains meshes with the tooth part of the sprocket and transmits power as tension.

■Only sprockets and Chains with the same specifications can be used in combination.
This series is ISO Standard 08A (ANSI 40) roller Chains, and can be used in combination with our 40B series sprocket. Do not use it with European Standard 08B sprocket, which may cause the chain sprocket mechanism to fail to function properly!

■ Product Composition
Components of the chain

Dimensional Drawing of Chains

Ordinary ISO Standard 08A (ANSI 40) Chain Precision Roller Chains
Chain 08A (ANSI 40) Dimensional Drawing

Material: Steel

Specifications Overview of Chains

■ Sprocket, Chains selection
This series is ISO Standard 08A (ANSI 40) roller Chains, and can be used in combination with our 40B series sprocket.
Do not use it with European Standard 08B sprocket, which may cause the Chains sprocket mechanism to fail to function properly!

Chain 08A (ANSI 40) Specifications Overview

Chain 08A (ANSI 40) Specifications Overview

Product Feature of Chains

■Sprocket Chains drive has the following features compared with gear drive and belt drive:
1. Multi-tooth load bearing, safe and reliable;
2. Flexible transmission, absorbing shock and vibration;
3. Large center distance range, low manufacturing and mounting accuracy requirements;
4. Compared with belt drive, the transmission ratio is accurate and the transmission efficiency is higher, suitable for high temperature.

■Two main purposes of the Chains:
1. Connect the motor for transmission 2. Place the workpiece directly or indirectly on the chain for transfer

Example Use of Chains

Used for driving power
A mechanism that can convert motor power into roller rotation by combining multiple sprockets and Chains

Used for transporting workpieces
A chain conveyor frame with high versatility using flat profiles and Chains guides

Used for transporting workpieces
A mechanism used to mount accessories on the Chains, and extract and transport workpieces

Precautions of Chains

This series is ISO Standard 08A (ANSI 40) roller Chains, and can be used in combination with our 40B series sprocket. Do not use it with European Standard 08B sprocket, which may cause the Chains sprocket mechanism to fail to function properly!

If you need to cut the chain by yourself, please confirm whether the Chains link to be cut is an inner link or an outer link. If it is a single section after being cut off, it may need to be used with an offset link head.

Usage Method of Chains

How to mount the roller chain

(A) Axis configuration
■Horizontal
Even when the two axes are arranged horizontally, the rotation direction of the axis must be considered.
The examples (2) and (3) in the figure show that when the Chains is stretched, the disengagement between the sprocket teeth and the chain is not smooth and may bite.
In particular, the upper and lower chains in (3) will contact each other, so an idler is required.

■Vertical
If the chain is stretched, slack as shown in (5) will occur, and
when a small sprocket is used on the lower side, the Chains may fall off. Therefore, please use it at an angle of 60 or less as shown in (4).
When it is necessary to use it vertically due to the mechanism or space, it is recommended to put the large sprocket on the lower side, and
use the idler on the outside or inside as shown in (6).

(B) Deflection
Deflection is generally about 4% of the shaft spacing, and about 2% in the following cases.
a. Vertical transmission or close to vertical transmission
b. Shaft spacing is more than 1m
c. When frequent heavy load starting and stopping are required
d. When reverse rotation is required

(C)When the load changes
If a tension adjuster is mounted on the tension side or slack side of the Chains to provide initial tension in advance, it will eliminate vibration and reduce noise during operation.

Related Products of Chains

Sprocket 40B

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
C-CHE40-120
C-CHE40-120

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Type	Max. Allowable Tension (kN)	Type	Number of Links (pc(s).)	Number of Links (Units)
	₹ 1,081.20	1 Piece(s)	Available	Same day	10	Standard Chains	~99	Fixed Number of Knots	120	-
	-	2 Piece(s)		15 Day(s)	10	Standard Chains	~99	Specified Number of Knots	-	120

Basic Information

Nominal Number	40	Pitch	12.7	Number of Strands	1
Material	Steel	Surface Treatment	Not Provided

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: I bought MISUMI chains, but why can't I use them on my original sprocket?: Answer: Please confirm the specifications of the original sprocket and chain. Specification series number may not match. In addition, there are two specifications: A series and B series in China. The two specifications of sprocket chain are not universal.
Question: Does the chain need routine maintenance after installation and use?: Answer: The chain needs regular maintenance after installation and use. These include daily lubricant application, confirmation of chain slack. The quality of lubrication will affect the life of the chain. Especially in recent years, high-speed use has been increasing, so it is necessary to take efficient lubrication methods.
Question: Does the chain purchased come with joints, and if any, how many joints?: Answer: In principle, one chain comes with one joint. If the customer needs multiple joints to use, you can buy it yourself, we have separate joints to choose from. Please refer to the chain type when purchasing joints.
Question: How to use the carrier chain?: Answer: The carrier chain can only be used for transmission, not for scenarios with large load and high positioning accuracy, please be careful!
Question: Can the chain be cut off when it is extended?: Answer: It can be cut off. Our company has simple chain cutter available for selection.

Check other FAQ (2 items) Hide

Search by Category / Brand

Search by Category

How can we improve?