Punches For Heavy Load, With Dowel Holes（Material：Powdered high-speed steel）

• You can add up to 6 items per a category to the compare list. Compare

  

  Punches for Heavy Load with Dowel Holes

  MISUMI

  A punch with a dowel hole on the punch shaft that allows for direct positioning of the punch. Convenient when using a punch retainer.
  - Recommended when you are concerned about damage to the brim of the punch, such as when punching high tensile strength materials.
  ・Size expanded from D32 to D45!

  • FLANGE
  • SKH51
  • POWDER HSS

  CAD ：

  2D / 3D

  Heavy-load punches	Shank type	Jector	Tip shape	Material	Surface treatment	Shank (mounting part) shape
  Yes	Single-stepped	None	A / D / R / E / G	Powdered high-speed steel	None	With locating dowel hole

  Days to Ship: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Punches for Heavy Load with Dowel Holes TiCN Coating

  MISUMI

  A punch with a dowel hole on the punch shaft that allows for direct positioning of the punch. Convenient when using a punch retainer.
  - Recommended when you are concerned about damage to the brim of the punch, such as when punching high tensile strength materials.
  ・Size expanded from D32 to D45!
  
  [What is TiCN coating]
  TiCN is a coating widely used in press molds. Improved punch life can be expected by increasing the wear resistance of the cutting edge.

  • FLANGE
  • SKH51
  • POWDER HSS
  • TiCN

  CAD ：

  2D / 3D

  Heavy-load punches	Shank type	Jector	Tip shape	Material	Surface treatment	Shank (mounting part) shape
  Yes	Single-stepped	None	A / D / R / E / G	Powdered high-speed steel	TiCN	With locating dowel hole

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Punches for Heavy Load with Dowel Holes RW Coating

  MISUMI

  A punch with a dowel hole on the punch shaft that allows for direct positioning of the punch. Convenient when using a punch retainer.
  - Recommended when you are concerned about damage to the brim of the punch, such as when punching high tensile strength materials.
  ・Size expanded from D32 to D45!
  
  [What is RW coating]
  It is a coating that is harder and more heat resistant than TiCN. Furthermore, WPC treatment is applied to the base to strengthen the adhesion of the coating film.
  Compared to TiCN/HW, it can be expected to have a significantly longer punch life and contribute to reducing mold maintenance costs.

  CAD ：

  2D / 3D

  Heavy-load punches	Shank type	Jector	Tip shape	Material	Surface treatment	Shank (mounting part) shape
  Yes	Single-stepped	None	A / D / R / E / G	Powdered high-speed steel	RW coating	With locating dowel hole

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Punches for Heavy Load with Dowel Holes HW Coating

  MISUMI

  A punch with a dowel hole on the punch shaft that allows for direct positioning of the punch. Convenient when using a punch retainer.
  - Recommended when you are concerned about damage to the brim of the punch, such as when punching high tensile strength materials.
  ・Size expanded from D32 to D45!
  
  [What is HW coating]
  It is a coating that improves the adhesion of the TiCN film by applying WPC treatment to the base of the TiCN coating.
  Since the coating film is less likely to peel off, the life of the punch can be expected to be longer than that of conventional TiCN.

  • FLANGE
  • SKH51
  • POWDER HSS
  • HW

  CAD ：

  2D / 3D

  Heavy-load punches	Shank type	Jector	Tip shape	Material	Surface treatment	Shank (mounting part) shape
  Yes	Single-stepped	None	A / D / R / E / G	Powdered high-speed steel	HW coating	With locating dowel hole

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Punch with Dowel Holes for Punching Thick Plates - RX Coating (Al-Cr Coating + Nitriding Treatment) -

  MISUMI

  For complete product overview and details on Punches for Heavy Load with Dowel Holes －RX Coating－ see the sections below:

  CAD ：

  2D / 3D

  Heavy-load punches	Shank type	Jector	Tip shape	Material	Surface treatment	Shank (mounting part) shape
  Yes	Single-stepped	None	A / D / R / E / G	Powdered high-speed steel	RX Coat	With locating dowel hole

  Days to Ship: 17 Day(s) or more

  17 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Punches for Heavy Load with Dowel Holes WPC Treatment

  MISUMI

  A punch with a dowel hole on the punch shaft that allows for direct positioning of the punch. Convenient when using a punch retainer.
  - Recommended when you are concerned about damage to the brim of the punch, such as when punching high tensile strength materials.
  ・Size expanded from D32 to D45!

  • FLANGE
  • SKH51
  • POWDER HSS
  • WPC

  CAD ：

  2D / 3D

  Heavy-load punches	Shank type	Jector	Tip shape	Material	Surface treatment	Shank (mounting part) shape
  Yes	Single-stepped	None	A / D / R / E / G	Powdered high-speed steel	WPC	With locating dowel hole

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Specifications
Heavy-load punches
Shank type
Jector
Tip shape
Material
Surface treatment
Shank (mounting part) shape

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	Punches for Heavy Load with Dowel Holes	Punches for Heavy Load with Dowel Holes TiCN Coating	Punches for Heavy Load with Dowel Holes RW Coating	Punches for Heavy Load with Dowel Holes HW Coating	Punch with Dowel Holes for Punching Thick Plates - RX Coating (Al-Cr Coating + Nitriding Treatment) -	Punches for Heavy Load with Dowel Holes WPC Treatment
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From
Days to Ship	2 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	17 Day(s) or more	7 Day(s) or more
Specifications	FLANGE SKH51 POWDER HSS	FLANGE SKH51 POWDER HSS TiCN		FLANGE SKH51 POWDER HSS HW		FLANGE SKH51 POWDER HSS WPC
Heavy-load punches	Yes	Yes	Yes	Yes	Yes	Yes
Shank type	Single-stepped	Single-stepped	Single-stepped	Single-stepped	Single-stepped	Single-stepped
Jector	None	None	None	None	None	None
Tip shape	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G
Material	Powdered high-speed steel	Powdered high-speed steel	Powdered high-speed steel	Powdered high-speed steel	Powdered high-speed steel	Powdered high-speed steel
Surface treatment	None	TiCN	RW coating	HW coating	RX Coat	WPC
Shank (mounting part) shape	With locating dowel hole	With locating dowel hole	With locating dowel hole	With locating dowel hole	With locating dowel hole	With locating dowel hole

Loading...