Punches For Heavy Load（Shank type：Double-stepped）

• You can add up to 6 items per a category to the compare list. Compare

  

  Double Stepped Shoulder Punches for Heavy Load Normal

  MISUMI

  A punch with a guide section separate from the cutting edge. Please use this when the required cutting edge length for the punch guide cannot be secured with the set cutting edge diameter. For punching high-tensile materials and thick plates, the punch brim is slightly larger than a normal shoulder punch.

  CAD ：

  2D / 3D

  Tip shape	Shank type	Jector	Surface treatment	Heavy-load punches	Material	Shank (mounting part) shape
  A / D / R / E / G	Double-stepped	None	None	Yes	SKH51 Equivalent / Powdered high-speed steel	Standard

  Days to Ship: 2 Day(s)

  2 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Double-Stepped Shoulder Punches for Heavy Load RW Coating

  MISUMI

  This is a two-stage punch for punching high tensile strength and thick plates, with improved coating adhesion by using a combination of Al-Cr coating, which has higher heat resistance and durability than conventional TiCN, and WPCⓇ treatment. Please use this when the required cutting edge length for the punch guide cannot be secured with the set cutting edge diameter.

  CAD ：

  2D / 3D

  Tip shape	Shank type	Jector	Surface treatment	Heavy-load punches	Material	Shank (mounting part) shape
  A / D / R / E / G	Double-stepped	None	RW coating	Yes	SKH51 Equivalent / Powdered high-speed steel	Standard

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Two-Stage Punch for Punching Thick Plates - RX Coating (Al-Cr Coating + Nitriding Treatment) -

  MISUMI

  For complete product overview and details on Double-stepped Shoulder Punches for Heavy Load －RX Coating－ see the sections below:

  CAD ：

  2D / 3D

  Tip shape	Shank type	Jector	Surface treatment	Heavy-load punches	Material	Shank (mounting part) shape
  A / D / R / E / G	Double-stepped	None	RX Coat	Yes	Powdered high-speed steel / Equivalent to SKH51	Standard

  Days to Ship: 17 Day(s) or more

  17 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Double Stepped Shoulder Punches for Heavy Load Normal TiCN Coating

  MISUMI

  A two-stage punch for punching high tensile strength and thick plates with TiCN coating, which is widely used in press molds. Please use this when the required cutting edge length for the punch guide cannot be secured with the set cutting edge diameter.

  CAD ：

  2D / 3D

  Tip shape	Shank type	Jector	Surface treatment	Heavy-load punches	Material	Shank (mounting part) shape
  A / D / R / E / G	Double-stepped	None	TiCN	Yes	SKH51 Equivalent / Powdered high-speed steel	Standard

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Double Stepped Shoulder Punches for Heavy Load Normal HW Coating

  MISUMI

  two-stage punch for punching high tensile strength and thick plates that has improved coating adhesion by using WPCⓇ treatment. Please use this when the required cutting edge length for the punch guide cannot be secured with the set cutting edge diameter.

  CAD ：

  2D / 3D

  Tip shape	Shank type	Jector	Surface treatment	Heavy-load punches	Material	Shank (mounting part) shape
  A / D / R / E / G	Double-stepped	None	HW coating	Yes	SKH51 Equivalent / Powdered high-speed steel	Standard

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Specifications
Tip shape
Shank type
Jector
Surface treatment
Heavy-load punches
Material
Shank (mounting part) shape

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	Double Stepped Shoulder Punches for Heavy Load Normal	Double-Stepped Shoulder Punches for Heavy Load RW Coating	Two-Stage Punch for Punching Thick Plates - RX Coating (Al-Cr Coating + Nitriding Treatment) -	Double Stepped Shoulder Punches for Heavy Load Normal TiCN Coating	Double Stepped Shoulder Punches for Heavy Load Normal HW Coating
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From
Days to Ship	2 Day(s)	9 Day(s) or more	17 Day(s) or more	7 Day(s) or more	7 Day(s) or more
Specifications
Tip shape	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G
Shank type	Double-stepped	Double-stepped	Double-stepped	Double-stepped	Double-stepped
Jector	None	None	None	None	None
Surface treatment	None	RW coating	RX Coat	TiCN	HW coating
Heavy-load punches	Yes	Yes	Yes	Yes	Yes
Material	SKH51 Equivalent / Powdered high-speed steel	SKH51 Equivalent / Powdered high-speed steel	Powdered high-speed steel / Equivalent to SKH51	SKH51 Equivalent / Powdered high-speed steel	SKH51 Equivalent / Powdered high-speed steel
Shank (mounting part) shape	Standard	Standard	Standard	Standard	Standard

Loading...