Punches With Locating Dowel Holes（Jector：None）

• You can add up to 6 items per a category to the compare list. Compare

  

  Punches with Locating Dowel Holes

  MISUMI

  A punch with a dowel hole on the punch shaft that allows for direct positioning of the punch. Convenient when using a punch retainer etc. when assembling a punch mold.
  ・We have expanded the compatible sizes of coating punches from D32 to D45!

  • FLANGE
  • SKD11

  CAD ：

  2D / 3D

  Material	Tip shape	Surface treatment	Jector	Heavy-load punches	Shank type	Shank (mounting part) shape
  SKD11 Equivalent	A / D / R / E / G	None	None	No	Single-stepped	With locating dowel hole

  Days to Ship: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Punches with Locating Dowel Holes TiCN Coating

  MISUMI

  A punch with a dowel hole on the punch shaft that allows for direct positioning of the punch. Convenient when using a punch retainer etc. when assembling a punch mold.
  ・We have expanded the compatible sizes of coating punches from D32 to D45!
  [What is TiCN coating]
  TiCN is a coating widely used in press molds. Improved punch life can be expected by increasing the wear resistance of the cutting edge.

  • FLANGE
  • SKD11
  • TiCN

  CAD ：

  2D / 3D

  Material	Tip shape	Surface treatment	Jector	Heavy-load punches	Shank type	Shank (mounting part) shape
  SKD11 Equivalent	A / D / R / E / G	TiCN	None	No	Single-stepped	With locating dowel hole

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Punches with Locating Dowel Holes, HW Coating

  MISUMI

  A punch with a dowel hole on the punch shaft that allows for direct positioning of the punch. Convenient when using a punch retainer etc. when assembling a punch mold.
  ・We have expanded the compatible sizes of coating punches from D32 to D45!
  [What is HW coating]
  It is a coating that improves the adhesion of the TiCN film by applying WPC treatment to the base of the TiCN coating.
  Since the coating film is less likely to peel off, the life of the punch can be expected to be longer than that of conventional TiCN.

  CAD ：

  2D / 3D

  Material	Tip shape	Surface treatment	Jector	Heavy-load punches	Shank type	Shank (mounting part) shape
  SKD11 Equivalent	A / D / R / E / G	HW coating	None	No	Single-stepped	With locating dowel hole

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Punches with Locating Dowel Holes Dicoat treatment

  MISUMI

  - A punch with a dowel hole on the punch shaft that allows for direct positioning of the punch. Convenient when using a punch retainer etc. when assembling a punch mold.

  • FLANGE
  • SKD11
  • DICOAT

  CAD ：

  2D / 3D

  Material	Tip shape	Surface treatment	Jector	Heavy-load punches	Shank type	Shank (mounting part) shape
  SKD11 Equivalent	A / D / R / E / G	Dicoat	None	No	Single-stepped	With locating dowel hole

  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Punches with Locating Dowel Holes, NW Coating

  MISUMI

  A punch with a dowel hole on the punch shaft that allows for direct positioning of the punch. Convenient when using a punch retainer etc. when assembling a punch mold.
  ・We have expanded the compatible sizes of coating punches from D32 to D45!
  [What is NW coating]
  WPC treatment is applied to the base of DLC coating to improve the adhesion of the DLC film. Like normal DLC, it is effective for piercing aluminum materials.

  CAD ：

  2D / 3D

  Material	Tip shape	Surface treatment	Jector	Heavy-load punches	Shank type	Shank (mounting part) shape
  SKD11 Equivalent	A / D / R / E / G	DLC foundation WPC	None	No	Single-stepped	With locating dowel hole

  Days to Ship: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Punches with Locating Dowel Holes, WPC treatment

  MISUMI

  - A punch with a dowel hole on the punch shaft that allows for direct positioning of the punch. Convenient when using a punch retainer etc. when assembling a punch mold.

  CAD ：

  2D / 3D

  Material	Tip shape	Surface treatment	Jector	Heavy-load punches	Shank type	Shank (mounting part) shape
  SKD11 Equivalent	A / D / R / E / G	WPC	None	No	Single-stepped	With locating dowel hole

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Punches with Locating Dowel Holes RW Coating

  MISUMI

  A punch with a dowel hole on the punch shaft that allows for direct positioning of the punch. Convenient when using a punch retainer etc. when assembling a punch mold.
  ・We have expanded the compatible sizes of coating punches from D32 to D45!
  [What is RW coating]
  It is a coating that is harder and more heat resistant than TiCN. Furthermore, WPC treatment is applied to the base to strengthen the adhesion of the coating film.
  Compared to TiCN/HW, it can be expected to have a significantly longer punch life and contribute to reducing mold maintenance costs.

  CAD ：

  2D / 3D

  Material	Tip shape	Surface treatment	Jector	Heavy-load punches	Shank type	Shank (mounting part) shape
  SKD11 Equivalent	A / D / R / E / G	RW coating	None	No	Single-stepped	With locating dowel hole

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Punch with Positioning Dowel Hole - RX Coating (Al-Cr Coating + Nitriding Treatment) -

  MISUMI

  For complete product overview and details on Punches with Locating Dowel Holes －RX Coating－ see the sections below:

  CAD ：

  2D / 3D

  Material	Tip shape	Surface treatment	Jector	Heavy-load punches	Shank type	Shank (mounting part) shape
  SKD11 Equivalent	A / D / R / E / G	RX Coat	None	No	Single-stepped	With locating dowel hole

  Days to Ship: 17 Day(s) or more

  17 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Punches with Locating Dowel Holes, DLC Coating

  MISUMI

  A punch with a dowel hole on the punch shaft that allows for direct positioning of the punch. Convenient when using a punch retainer etc. when assembling a punch mold.
  ・We have expanded the compatible sizes of coating punches from D32 to D45!
  [What is DLC coating]
  Compared to other coatings, its greatest feature is a low coefficient of friction. Since there is less friction between the punch cutting edge and the workpiece, it is effective in piercing aluminum materials where chips are likely to be a problem during punching.

  CAD ：

  2D / 3D

  Material	Tip shape	Surface treatment	Jector	Heavy-load punches	Shank type	Shank (mounting part) shape
  SKD11 Equivalent	A / D / R / E / G	Without DLC foundation	None	No	Single-stepped	With locating dowel hole

  Days to Ship: 13 Day(s) or more

  13 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Specifications
Material
Tip shape
Surface treatment
Jector
Heavy-load punches
Shank type
Shank (mounting part) shape

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	Punches with Locating Dowel Holes	Punches with Locating Dowel Holes TiCN Coating	Punches with Locating Dowel Holes, HW Coating	Punches with Locating Dowel Holes Dicoat treatment	Punches with Locating Dowel Holes, NW Coating	Punches with Locating Dowel Holes, WPC treatment	Punches with Locating Dowel Holes RW Coating	Punch with Positioning Dowel Hole - RX Coating (Al-Cr Coating + Nitriding Treatment) -	Punches with Locating Dowel Holes, DLC Coating
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From
Days to Ship	2 Day(s) or more	7 Day(s) or more	7 Day(s) or more	8 Day(s) or more	13 Day(s) or more	7 Day(s) or more	9 Day(s) or more	17 Day(s) or more	13 Day(s) or more
Specifications	FLANGE SKD11	FLANGE SKD11 TiCN		FLANGE SKD11 DICOAT
Material	SKD11 Equivalent	SKD11 Equivalent	SKD11 Equivalent	SKD11 Equivalent	SKD11 Equivalent	SKD11 Equivalent	SKD11 Equivalent	SKD11 Equivalent	SKD11 Equivalent
Tip shape	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G
Surface treatment	None	TiCN	HW coating	Dicoat	DLC foundation WPC	WPC	RW coating	RX Coat	Without DLC foundation
Jector	None	None	None	None	None	None	None	None	None
Heavy-load punches	No	No	No	No	No	No	No	No	No
Shank type	Single-stepped	Single-stepped	Single-stepped	Single-stepped	Single-stepped	Single-stepped	Single-stepped	Single-stepped	Single-stepped
Shank (mounting part) shape	With locating dowel hole	With locating dowel hole	With locating dowel hole	With locating dowel hole	With locating dowel hole	With locating dowel hole	With locating dowel hole	With locating dowel hole	With locating dowel hole

Loading...