• You can add up to 6 items per a category to the compare list. Compare

  

  Tapped Punches

  MISUMI

  ・As a measure against bolt breakage, we have expanded the specifications for large diameter tap types and added specifications for extra large diameter taps!
  ・A punch with a tap that is fixed and held with a bolt. It is easy to replace the punch and adjust the height after re-sharpening the cutting edge. Since there is no brim, it is also recommended for punching at narrow pitches.
  ・If you are worried about bolt breakage when punching thick plates or high-tensile steel materials, please try the large diameter tap type or the extra large diameter tap type.

  CAD ：

  2D / 3D

  Shank type	Material	Tip shape	Heavy-load punches	Jector	Surface treatment	Shank (mounting part) shape
  Single-stepped	SKD11 Equivalent / Powdered high-speed steel	A / D / R / E / G	No	None	None	Tapped

  Days to Ship: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapped Jector Punches Normal, WPC treatment

  MISUMI

  This is a type of punch that is fixed with a bolt. It is easy to adjust the punch height after re-sharpening the cutting edge. A jetter pin for removing scraps is built into the punch.

  CAD ：

  2D / 3D

  Shank type	Material	Tip shape	Heavy-load punches	Jector	Surface treatment	Shank (mounting part) shape
  Single-stepped	SKD11 Equivalent	A / D / R / E / G	No	Standard type	None / WPC	Tapped

  Days to Ship: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapped Punches DLC Coating

  MISUMI

  -Added specifications for large diameter tap type and extra large diameter tap type to prevent bolt breakage!
  ・A punch with a tap that is fixed and held with a bolt. It is easy to replace the punch and adjust the height after re-sharpening the cutting edge. Since there is no brim, it is also recommended for punching at narrow pitches.
  ・If you are worried about bolt breakage when punching thick plates or high-tensile steel materials, please try the large diameter tap type or the extra large diameter tap type.

  CAD ：

  2D / 3D

  Shank type	Material	Tip shape	Heavy-load punches	Jector	Surface treatment	Shank (mounting part) shape
  Single-stepped	Powdered high-speed steel	A / D / R / E / G	No	None	Without DLC foundation / DLC foundation WPC	Tapped

  Days to Ship: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapped Punches Dicoat treatment, TiCN Coating

  MISUMI

  -Added specifications for large diameter tap type and extra large diameter tap type to prevent bolt breakage!
  ・A punch with a tap that is fixed and held with a bolt. It is easy to replace the punch and adjust the height after re-sharpening the cutting edge. Since there is no brim, it is also recommended for punching at narrow pitches.
  ・If you are worried about bolt breakage when punching thick plates or high-tensile steel materials, please try the large diameter tap type or the extra large diameter tap type.

  CAD ：

  2D / 3D

  Shank type	Material	Tip shape	Heavy-load punches	Jector	Surface treatment	Shank (mounting part) shape
  Single-stepped	SKD11 Equivalent / Powdered high-speed steel	A / D / R / E / G	No	None	Dicoat / TiCN	Tapped

  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapped Punches WPC treatment, HW Coating

  MISUMI

  -Added specifications for large diameter tap type and extra large diameter tap type to prevent bolt breakage!
  ・A punch with a tap that is fixed and held with a bolt. It is easy to replace the punch and adjust the height after re-sharpening the cutting edge. Since there is no brim, it is also recommended for punching at narrow pitches.
  ・If you are worried about bolt breakage when punching thick plates or high-tensile steel materials, please try the large diameter tap type or the extra large diameter tap type.

  CAD ：

  2D / 3D

  Shank type	Material	Tip shape	Heavy-load punches	Jector	Surface treatment	Shank (mounting part) shape
  Single-stepped	SKD11 Equivalent / Powdered high-speed steel	A / D / R / E / G	No	None	HW coating / WPC	Tapped

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Punch with Tap -RX Coating/HX Coating-

  MISUMI

  For complete product overview and details on Tapped Punches －RX Coating・HX Coating－ see the sections below:

  CAD ：

  2D / 3D

  Shank type	Material	Tip shape	Heavy-load punches	Jector	Surface treatment	Shank (mounting part) shape
  Single-stepped	Powdered high-speed steel	A / D / R / E / G	No	None	RX Coat	Tapped

  Days to Ship: 17 Day(s) or more

  17 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapped Punches RW Coating

  MISUMI

  -Added specifications for large diameter tap type and extra large diameter tap type to prevent bolt breakage!
  ・A punch with a tap that is fixed and held with a bolt. It is easy to replace the punch and adjust the height after re-sharpening the cutting edge. Since there is no brim, it is also recommended for punching at narrow pitches.
  ・If you are worried about bolt breakage when punching thick plates or high-tensile steel materials, please try the large diameter tap type or the extra large diameter tap type.

  CAD ：

  2D / 3D

  Shank type	Material	Tip shape	Heavy-load punches	Jector	Surface treatment	Shank (mounting part) shape
  Single-stepped	Powdered high-speed steel	A / D / R / E / G	No	None	RW coating	Tapped

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Specifications
Shank type
Material
Tip shape
Heavy-load punches
Jector
Surface treatment
Shank (mounting part) shape

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	Tapped Punches	Tapped Jector Punches Normal, WPC treatment	Tapped Punches DLC Coating	Tapped Punches Dicoat treatment, TiCN Coating	Tapped Punches WPC treatment, HW Coating	Punch with Tap -RX Coating/HX Coating-	Tapped Punches RW Coating
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From
Days to Ship	2 Day(s) or more	2 Day(s) or more	13 Day(s) or more	8 Day(s) or more	7 Day(s) or more	17 Day(s) or more	9 Day(s) or more
Specifications
Shank type	Single-stepped	Single-stepped	Single-stepped	Single-stepped	Single-stepped	Single-stepped	Single-stepped
Material	SKD11 Equivalent / Powdered high-speed steel	SKD11 Equivalent	Powdered high-speed steel	SKD11 Equivalent / Powdered high-speed steel	SKD11 Equivalent / Powdered high-speed steel	Powdered high-speed steel	Powdered high-speed steel
Tip shape	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G
Heavy-load punches	No	No	No	No	No	No	No
Jector	None	Standard type	None	None	None	None	None
Surface treatment	None	None / WPC	Without DLC foundation / DLC foundation WPC	Dicoat / TiCN	HW coating / WPC	RX Coat	RW coating
Shank (mounting part) shape	Tapped	Tapped	Tapped	Tapped	Tapped	Tapped	Tapped

Loading...