• You can add up to 6 items per a category to the compare list. Compare

  

  Shoulder Punches

  MISUMI

  -The most versatile punch for punching.
  ・You can choose from 3 types of materials: die steel, high speed steel, and powder high speed steel.
  ・There is also a Jector Punch that has a scrap removal pin built into the punch to prevent scrap removal.

  CAD ：

  2D / 3D

  Shank type	Tip shape	Jector	Material	Heavy-load punches	Shank (mounting part) shape	Surface treatment
  Single-stepped	A / D / R / E / G	None	SKD11 Equivalent / SKH51 Equivalent / Powdered high-speed steel	No	Standard	None

  Days to Ship: 2 Day(s)

  2 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Jector Punches

  MISUMI

  Shoulder punch A punch with a kicker pin built into the inside for removing scraps.
  ・If you want to strengthen the scum removal force, please use the "spring reinforced type".
  ・There is also a "large pin diameter type" in which the pin for scrap removal is larger than usual.

  CAD ：

  2D / 3D

  Shank type	Tip shape	Jector	Material	Heavy-load punches	Shank (mounting part) shape	Surface treatment
  Single-stepped	A / D / R / E / G	Standard type / Spring reinforced type	SKD11 Equivalent / SKH51 Equivalent / Powdered high-speed steel	No	Standard	None

  Days to Ship: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Key Flat Shank Shoulder Punches Normal, TiCN Coating

  MISUMI

  A shoulder punch with a flat surface on the shank to prevent rotation. You can choose between a normal type with no coating and a TiCN coating with improved wear resistance.

  CAD ：

  2D / 3D

  Shank type	Tip shape	Jector	Material	Heavy-load punches	Shank (mounting part) shape	Surface treatment
  Single-stepped	A / D / R / E / G	None	SKD11 Equivalent / SKH51 Equivalent / Powdered high-speed steel	No	Key flat	None

  Days to Ship: 2 Day(s)

  2 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Key Flat Shank Jector Punches Normal, TiCN Coating

  MISUMI

  A jetter punch with a flat surface on the shank to prevent rotation. You can choose between a normal type with no coating and a TiCN coating with improved wear resistance.

  CAD ：

  2D / 3D

  Shank type	Tip shape	Jector	Material	Heavy-load punches	Shank (mounting part) shape	Surface treatment
  Single-stepped	A / D / R / E / G	Standard type / Spring reinforced type	SKD11 Equivalent / SKH51 Equivalent / Powdered high-speed steel	No	Key flat	None

  Days to Ship: 2 Day(s)

  2 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Double Stepped Shoulder Punches, Normal

  MISUMI

  punch with a guide section separate from the cutting edge. Please use this when the required cutting edge length B for the guide cannot be secured with the cutting edge diameter P.

  CAD ：

  2D / 3D

  Shank type	Tip shape	Jector	Material	Heavy-load punches	Shank (mounting part) shape	Surface treatment
  Double-stepped	A / D / R / E / G	None	SKD11 Equivalent / SKH51 Equivalent / Powdered high-speed steel	No	Standard	None

  Days to Ship: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shoulder Punches Quill type, Normal, Lapping, TiCN Coating, HW Coating

  MISUMI

  shoulder punch for punching small holes. For shaft diameter D1.6-2.5, there are two types of brim thickness to choose from: 3mm and 5mm. We also support various surface treatments such as lapping and TiCN.

  CAD ：

  2D / 3D

  Shank type	Tip shape	Jector	Material	Heavy-load punches	Shank (mounting part) shape	Surface treatment
  Single-stepped	A / D / R / E / G	None	SKD11 Equivalent / SKH51 Equivalent / Powdered high-speed steel	No	Standard	None

  Days to Ship: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini Punches

  MISUMI

  This punch is useful when drilling multiple holes in relatively thin material.

  CAD ：

  2D / 3D

  Shank type	Tip shape	Jector	Material	Heavy-load punches	Shank (mounting part) shape	Surface treatment
  Single-stepped	A	None	SKH51 Equivalent	No	Standard	None

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Double Stepped Shoulder Punches Quill type

  MISUMI

  A punch with a guide section separate from the cutting edge. Please use this when the diameter of the cutting edge is small and it is difficult to secure the necessary cutting edge length for the guide.

  CAD ：

  2D / 3D

  Shank type	Tip shape	Jector	Material	Heavy-load punches	Shank (mounting part) shape	Surface treatment
  Double-stepped	A	None	SKH51 Equivalent / Powdered high-speed steel	No	Standard	None

  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Key Flat Shank Tapped Punches Normal, TiCN Coating

  MISUMI

  tapped punch with a flat surface on the shank to prevent rotation. You can choose between a normal type with no coating and a TiCN coating with improved wear resistance.

  CAD ：

  2D / 3D

  Shank type	Tip shape	Jector	Material	Heavy-load punches	Shank (mounting part) shape	Surface treatment
  Single-stepped	A / D / R / E / G	None	SKD11 Equivalent / Powdered high-speed steel	No	With key flat tap	None

  Days to Ship: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Jector Punches Configurable full length, Fixed B type, Normal, WPC treatment

  MISUMI

  ・This is a jetter punch that keeps the cutting edge length (B dimension) constant for any given overall length (L dimension).
  ・If you want to strengthen the scum removal force, please use the "spring reinforced type".
  - Since there is no side hole in the shank of the punch, you can use it as an air blow punch by removing the kicker pin.

  CAD ：

  2D / 3D

  Shank type	Tip shape	Jector	Material	Heavy-load punches	Shank (mounting part) shape	Surface treatment
  Single-stepped	A / D / R / E / G	Standard type / Spring reinforced type	SKD11 Equivalent / SKH51 Equivalent	No	Standard	None

  Days to Ship: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Jector Punches Normal and Lapping with Large Diameter Pins

  MISUMI

  ・Since the diameter of the waste removal pin is larger than that of a normal jetter punch, a more stable waste removal effect can be expected.
  ・The pin strength and rigidity have also been increased by increasing the diameter of the brushing pin. Please also try this when pin breakage is a problem with regular jet punches.

  CAD ：

  2D / 3D

  Shank type	Tip shape	Jector	Material	Heavy-load punches	Shank (mounting part) shape	Surface treatment
  Single-stepped	A / D / R / E / G	Large-diameter pin type	SKD11 Equivalent	No	Standard	None

  Days to Ship: 2 Day(s) or more

  2 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shoulder Punches Short type, Normal, TiCN Coating

  MISUMI

  A shoulder punch with a shorter overall length than usual. By reducing the connecting radius between the cutting edge and the shaft, the cutting edge length and punch holding margin are secured with a short length.

  CAD ：

  2D / 3D

  Shank type	Tip shape	Jector	Material	Heavy-load punches	Shank (mounting part) shape	Surface treatment
  Single-stepped	A / D / R / E / G	None	SKD11 Equivalent / SKH51 Equivalent / Powdered high-speed steel	No	Standard	None

  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Specifications
Shank type
Tip shape
Jector
Material
Heavy-load punches
Shank (mounting part) shape
Surface treatment

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	Shoulder Punches	Jector Punches	Key Flat Shank Shoulder Punches Normal, TiCN Coating	Key Flat Shank Jector Punches Normal, TiCN Coating	Double Stepped Shoulder Punches, Normal	Shoulder Punches Quill type, Normal, Lapping, TiCN Coating, HW Coating	Mini Punches	Double Stepped Shoulder Punches Quill type	Key Flat Shank Tapped Punches Normal, TiCN Coating	Jector Punches Configurable full length, Fixed B type, Normal, WPC treatment	Jector Punches Normal and Lapping with Large Diameter Pins	Shoulder Punches Short type, Normal, TiCN Coating
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From
Days to Ship	2 Day(s)	2 Day(s) or more	2 Day(s)	2 Day(s)	2 Day(s) or more	2 Day(s) or more	7 Day(s) or more	8 Day(s) or more	2 Day(s) or more	2 Day(s) or more	2 Day(s) or more	8 Day(s) or more
Specifications
Shank type	Single-stepped	Single-stepped	Single-stepped	Single-stepped	Double-stepped	Single-stepped	Single-stepped	Double-stepped	Single-stepped	Single-stepped	Single-stepped	Single-stepped
Tip shape	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A	A	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G	A / D / R / E / G
Jector	None	Standard type / Spring reinforced type	None	Standard type / Spring reinforced type	None	None	None	None	None	Standard type / Spring reinforced type	Large-diameter pin type	None
Material	SKD11 Equivalent / SKH51 Equivalent / Powdered high-speed steel	SKD11 Equivalent / SKH51 Equivalent / Powdered high-speed steel	SKD11 Equivalent / SKH51 Equivalent / Powdered high-speed steel	SKD11 Equivalent / SKH51 Equivalent / Powdered high-speed steel	SKD11 Equivalent / SKH51 Equivalent / Powdered high-speed steel	SKD11 Equivalent / SKH51 Equivalent / Powdered high-speed steel	SKH51 Equivalent	SKH51 Equivalent / Powdered high-speed steel	SKD11 Equivalent / Powdered high-speed steel	SKD11 Equivalent / SKH51 Equivalent	SKD11 Equivalent	SKD11 Equivalent / SKH51 Equivalent / Powdered high-speed steel
Heavy-load punches	No	No	No	No	No	No	No	No	No	No	No	No
Shank (mounting part) shape	Standard	Standard	Key flat	Key flat	Standard	Standard	Standard	Standard	With key flat tap	Standard	Standard	Standard
Surface treatment	None	None	None	None	None	None	None	None	None	None	None	None

Loading...