Ejector Sleeves（Head thickness：4mm(T4)）

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Stepped Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-

  MISUMI

  High-speed steel SKH51, coaxiality ◎0.01, single wall thickness 0.6mm~, S dimension long type stepped ejector sleeve.

  CAD ：

  2D / 3D

  D (Shaft diameter)(mm)	P (Tip diameter)(mm)	Material	V (Hole diameter)(mm)	Head thickness	Product composition	Surface treatment	Concentricity	Boring method	Inner dia. tolerance	Shaft diameter tolerance	Brand	Tapered or not
  3.5 ～ 13	3.2 ～ 12.9	SKH51	0.8 ～ 11.7	4mm(T4)	Single sleeve	No	◎0.01	Wire cutting & polishing	+0.01/0	-0.01/-0.02	-	No

  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/Free Designation Type

  MISUMI

  If your product inquiries are out of catalogue, we can support by drawing (Made to order).Please contact PM_BD@misumi.co.th

  CAD ：

  2D / 3D

  D (Shaft diameter)(mm)	P (Tip diameter)(mm)	Material	V (Hole diameter)(mm)	Head thickness	Product composition	Surface treatment	Concentricity	Boring method	Inner dia. tolerance	Shaft diameter tolerance	Brand	Tapered or not
  4 ～ 10	3 ～ 9.95	SKD61	1.5 ～ 7.9	4mm(T4)	Single sleeve	Nitrided	◎0.03	Reaming	H7	-0.01/-0.02	-	No

  Days to Ship: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Stepped Ejector Sleeves -SKH51/0.6mm Wall Type-

  MISUMI

  This is a stepped ejector sleeve that is different from the straight type. The tip wall thickness can be set to a minimum of 0.6mm, and the brim thickness can be selected from 4mm, 6mm/8mm (JIS standard).

  CAD ：

  2D / 3D

  D (Shaft diameter)(mm)	P (Tip diameter)(mm)	Material	V (Hole diameter)(mm)	Head thickness	Product composition	Surface treatment	Concentricity	Boring method	Inner dia. tolerance	Shaft diameter tolerance	Brand	Tapered or not
  3.5 ～ 13	3.2 ～ 12.9	SKH51	0.8 ～ 11.7	4mm(T4)	Single sleeve	No	◎0.005 / ◎0.01	Grinding	+0.005/0 / +0.01/0	0/-0.005 / -0.01/-0.02	-	No

  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Small Diameter·Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/0.3mm Wall Type-

  MISUMI

  This is a stepped ejector sleeve that is different from the straight type. The wall thickness at the tip can be set to a minimum of 0.3mm, making it thinner than regular products. In addition, the coaxiality is 0.005, making it a more accurate product than usual.

  CAD ：

  2D / 3D

  D (Shaft diameter)(mm)	P (Tip diameter)(mm)	Material	V (Hole diameter)(mm)	Head thickness	Product composition	Surface treatment	Concentricity	Boring method	Inner dia. tolerance	Shaft diameter tolerance	Brand	Tapered or not
  2.5 ～ 6	1.8 ～ 5.95	SKH51	0.8 ～ 5.1	4mm(T4)	Single sleeve	No	◎0.005	Grinding	+0.005/0	0/-0.005	-	No

  Days to Ship: 10 Day(s)

  10 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  (Economy series) STEP EJECTOR SLEEVES -JIS Type/SKD61 equivalent+Nitrided/◎0.08/Dimensions Specify-

  MISUMI

  CAD ：

  2D / 3D

  D (Shaft diameter)(mm)	P (Tip diameter)(mm)	Material	V (Hole diameter)(mm)	Head thickness	Product composition	Surface treatment	Concentricity	Boring method	Inner dia. tolerance	Shaft diameter tolerance	Brand	Tapered or not
  4 ～ 16	3 ～ 15.95	SKD61 Equivalent	1.5 ～ 13	4mm(T4)	Single sleeve	Nitrided	◎0.08	Reaming	H7	-0.01/-0.02	C-VALUE	No

  Days to Ship: 13 Day(s)

  13 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/4mm Head/Free Designation Type-

  MISUMI

  Stepped ejector sleeve with die steel SKD61 + nitriding, coaxiality ◎0.06, collar thickness 4mm, free specification type.

  CAD ：

  2D / 3D

  D (Shaft diameter)(mm)	P (Tip diameter)(mm)	Material	V (Hole diameter)(mm)	Head thickness	Product composition	Surface treatment	Concentricity	Boring method	Inner dia. tolerance	Shaft diameter tolerance	Brand	Tapered or not
  4 ～ 16	3 ～ 15.95	SKD61	1.5 ～ 13	4mm(T4)	Single sleeve	Nitrided	◎0.06	Reaming	H7	-0.01/-0.02	-	No

  Days to Ship: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  (Economy series) STEP EJECTOR SLEEVES -JIS Type/SKD61 equivalent+Nitrided/◎0.05/Dimensions Specify-

  MISUMI

  CAD ：

  2D / 3D

  D (Shaft diameter)(mm)	P (Tip diameter)(mm)	Material	V (Hole diameter)(mm)	Head thickness	Product composition	Surface treatment	Concentricity	Boring method	Inner dia. tolerance	Shaft diameter tolerance	Brand	Tapered or not
  4 ～ 10	3 ～ 9.95	SKD61 Equivalent	1.5 ～ 7.9	4mm(T4)	Single sleeve	Nitrided	◎0.06	-	H7	-0.01/-0.02	C-VALUE	-

  Days to Ship: 13 Day(s)

  13 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/L Dimension Designation Type-

  MISUMI

  Stepped ejector sleeve with die steel SKD61 + nitriding, coaxiality ◎0.06, collar thickness 4mm, JIS/total length specified type.

  CAD ：

  2D / 3D

  D (Shaft diameter)(mm)	P (Tip diameter)(mm)	Material	V (Hole diameter)(mm)	Head thickness	Product composition	Surface treatment	Concentricity	Boring method	Inner dia. tolerance	Shaft diameter tolerance	Brand	Tapered or not
  4 ～ 8	3 ～ 5.5	SKD61	1.5 ～ 3.5	4mm(T4)	Single sleeve	Nitrided	◎0.06	Reaming	H7	-0.01/-0.02	-	No

  Days to Ship: 17 Day(s)

  17 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/Blank Type-

  MISUMI

  Die steel SKD61+ nitriding, coaxiality ◎0.06, collar thickness 4mm, JIS/standard length type stepped ejector sleeve.

  CAD ：

  2D / 3D

  D (Shaft diameter)(mm)	P (Tip diameter)(mm)	Material	V (Hole diameter)(mm)	Head thickness	Product composition	Surface treatment	Concentricity	Boring method	Inner dia. tolerance	Shaft diameter tolerance	Brand	Tapered or not
  4 ～ 8	3 ～ 6	SKD61	1.5 ～ 3.5	4mm(T4)	Single sleeve	Nitrided	◎0.06	Reaming	H7	-0.01/-0.02	-	No

  Days to Ship: 17 Day(s)

  17 Day(s)

Brand
Product Series
CAD
From
Days to Ship
D (Shaft diameter)(mm)
P (Tip diameter)(mm)
Material
V (Hole diameter)(mm)
Head thickness
Product composition
Surface treatment
Concentricity
Boring method
Inner dia. tolerance
Shaft diameter tolerance
Brand
Tapered or not

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	Precision Stepped Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-	Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/Free Designation Type	Precision Stepped Ejector Sleeves -SKH51/0.6mm Wall Type-	Precision Small Diameter·Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/0.3mm Wall Type-	(Economy series) STEP EJECTOR SLEEVES -JIS Type/SKD61 equivalent+Nitrided/◎0.08/Dimensions Specify-	Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/4mm Head/Free Designation Type-	(Economy series) STEP EJECTOR SLEEVES -JIS Type/SKD61 equivalent+Nitrided/◎0.05/Dimensions Specify-	Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/L Dimension Designation Type-	Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/Blank Type-
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From
Days to Ship	8 Day(s) or more	17 Day(s)	8 Day(s) or more	10 Day(s)	13 Day(s)	10 Day(s) or more	13 Day(s)	17 Day(s)	17 Day(s)
D (Shaft diameter)(mm)	3.5 ～ 13	4 ～ 10	3.5 ～ 13	2.5 ～ 6	4 ～ 16	4 ～ 16	4 ～ 10	4 ～ 8	4 ～ 8
P (Tip diameter)(mm)	3.2 ～ 12.9	3 ～ 9.95	3.2 ～ 12.9	1.8 ～ 5.95	3 ～ 15.95	3 ～ 15.95	3 ～ 9.95	3 ～ 5.5	3 ～ 6
Material	SKH51	SKD61	SKH51	SKH51	SKD61 Equivalent	SKD61	SKD61 Equivalent	SKD61	SKD61
V (Hole diameter)(mm)	0.8 ～ 11.7	1.5 ～ 7.9	0.8 ～ 11.7	0.8 ～ 5.1	1.5 ～ 13	1.5 ～ 13	1.5 ～ 7.9	1.5 ～ 3.5	1.5 ～ 3.5
Head thickness	4mm(T4)	4mm(T4)	4mm(T4)	4mm(T4)	4mm(T4)	4mm(T4)	4mm(T4)	4mm(T4)	4mm(T4)
Product composition	Single sleeve	Single sleeve	Single sleeve	Single sleeve	Single sleeve	Single sleeve	Single sleeve	Single sleeve	Single sleeve
Surface treatment	No	Nitrided	No	No	Nitrided	Nitrided	Nitrided	Nitrided	Nitrided
Concentricity	◎0.01	◎0.03	◎0.005 / ◎0.01	◎0.005	◎0.08	◎0.06	◎0.06	◎0.06	◎0.06
Boring method	Wire cutting & polishing	Reaming	Grinding	Grinding	Reaming	Reaming	-	Reaming	Reaming
Inner dia. tolerance	+0.01/0	H7	+0.005/0 / +0.01/0	+0.005/0	H7	H7	H7	H7	H7
Shaft diameter tolerance	-0.01/-0.02	-0.01/-0.02	0/-0.005 / -0.01/-0.02	0/-0.005	-0.01/-0.02	-0.01/-0.02	-0.01/-0.02	-0.01/-0.02	-0.01/-0.02
Brand	-	-	-	-	C-VALUE	-	C-VALUE	-	-
Tapered or not	No	No	No	No	No	No	-	No	No

Loading...