• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Stepped Ejector Sleeves -SKH51/0.6mm Wall Type-

  MISUMI

  This is a stepped ejector sleeve that is different from the straight type. The tip wall thickness can be set to a minimum of 0.6mm, and the brim thickness can be selected from 4mm, 6mm/8mm (JIS standard).

  CAD ：

  2D / 3D

  D (Shaft diameter)(mm)	P (Tip diameter)(mm)	Material	V (Hole diameter)(mm)	Head thickness	Product composition	Surface treatment	Concentricity	Boring method	Inner dia. tolerance	Shaft diameter tolerance	Brand	Tapered or not
  3.5 ～ 13	3.2 ～ 12.9	SKH51	0.8 ～ 11.7	4mm(T4) / 6mm(JIS) / 8mm(JIS)	Single sleeve	No	◎0.005 / ◎0.01	Grinding	+0.005/0 / +0.01/0	0/-0.005 / -0.01/-0.02	-	No

  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Stepped Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-

  MISUMI

  High-speed steel SKH51, coaxiality ◎0.01, single wall thickness 0.6mm~, S dimension long type stepped ejector sleeve.

  CAD ：

  2D / 3D

  D (Shaft diameter)(mm)	P (Tip diameter)(mm)	Material	V (Hole diameter)(mm)	Head thickness	Product composition	Surface treatment	Concentricity	Boring method	Inner dia. tolerance	Shaft diameter tolerance	Brand	Tapered or not
  3.5 ～ 13	3.2 ～ 12.9	SKH51	0.8 ～ 11.7	4mm(T4) / 6mm(JIS) / 8mm(JIS)	Single sleeve	No	◎0.01	Wire cutting & polishing	+0.01/0	-0.01/-0.02	-	No

  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Small Diameter·Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/0.3mm Wall Type-

  MISUMI

  This is a stepped ejector sleeve that is different from the straight type. The wall thickness at the tip can be set to a minimum of 0.3mm, making it thinner than regular products. In addition, the coaxiality is 0.005, making it a more accurate product than usual.

  CAD ：

  2D / 3D

  D (Shaft diameter)(mm)	P (Tip diameter)(mm)	Material	V (Hole diameter)(mm)	Head thickness	Product composition	Surface treatment	Concentricity	Boring method	Inner dia. tolerance	Shaft diameter tolerance	Brand	Tapered or not
  2.5 ～ 6	1.8 ～ 5.95	SKH51	0.8 ～ 5.1	4mm(T4)	Single sleeve	No	◎0.005	Grinding	+0.005/0	0/-0.005	-	No

  Days to Ship: 8 Day(s)

  8 Day(s)

Brand
Product Series
CAD
From
Days to Ship
D (Shaft diameter)(mm)
P (Tip diameter)(mm)
Material
V (Hole diameter)(mm)
Head thickness
Product composition
Surface treatment
Concentricity
Boring method
Inner dia. tolerance
Shaft diameter tolerance
Brand
Tapered or not

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	MISUMI	MISUMI
Product Series	Precision Stepped Ejector Sleeves -SKH51/0.6mm Wall Type-	Precision Stepped Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-	Precision Small Diameter·Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/0.3mm Wall Type-
CAD	2D / 3D	2D / 3D	2D / 3D
From
Days to Ship	8 Day(s) or more	8 Day(s) or more	8 Day(s)
D (Shaft diameter)(mm)	3.5 ～ 13	3.5 ～ 13	2.5 ～ 6
P (Tip diameter)(mm)	3.2 ～ 12.9	3.2 ～ 12.9	1.8 ～ 5.95
Material	SKH51	SKH51	SKH51
V (Hole diameter)(mm)	0.8 ～ 11.7	0.8 ～ 11.7	0.8 ～ 5.1
Head thickness	4mm(T4) / 6mm(JIS) / 8mm(JIS)	4mm(T4) / 6mm(JIS) / 8mm(JIS)	4mm(T4)
Product composition	Single sleeve	Single sleeve	Single sleeve
Surface treatment	No	No	No
Concentricity	◎0.005 / ◎0.01	◎0.01	◎0.005
Boring method	Grinding	Wire cutting & polishing	Grinding
Inner dia. tolerance	+0.005/0 / +0.01/0	+0.01/0	+0.005/0
Shaft diameter tolerance	0/-0.005 / -0.01/-0.02	-0.01/-0.02	0/-0.005
Brand	-	-	-
Tapered or not	No	No	No

Loading...