Ejector Sleeves（Inner dia. tolerance：+0.005/0）

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Straight Ejector Sleeves -SKH51/0.6mm Wall-

  MISUMI

  If your product inquiries are out of catalogue, we can support by drawing (Made to order). Please contact PM_BD@misumi.co.th

  CAD ：

  2D / 3D

  D/P (Shaft diameter)(mm)	V (Hole diameter)(mm)	Material	Head thickness	Product composition	Concentricity between the hole and shaft diameters	Shaft diameter tolerance	Inner dia. tolerance	Surface treatment	Boring method	Tapered or not	Center pin tip shape	Brand
  3.2 ～ 14	0.8 ～ 12.2	SKH51	4mm(T4) / 6mm(JIS) / 8mm(JIS)	Single sleeve	◎0.005	0/-0.005	+0.005/0	No	Grinding	No	No	-

  Days to Ship: 10 Day(s)

  10 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Ejector Sleeves (Bushings for straight ejector pins)

  MISUMI

  This is an ejector sleeve whose total length (L dimension) can be set to a minimum of 15mm. The wall thickness at the tip can be set to a minimum of 0.6mm, and the length from the sliding part to the relief hole is tapered.

  CAD ：

  2D / 3D

  D/P (Shaft diameter)(mm)	V (Hole diameter)(mm)	Material	Head thickness	Product composition	Concentricity between the hole and shaft diameters	Shaft diameter tolerance	Inner dia. tolerance	Surface treatment	Boring method	Tapered or not	Center pin tip shape	Brand
  2.5 ～ 8	1 ～ 6.8	SKH51	4mm(T4)	Single sleeve	◎0.01	0/-0.005	+0.005/0	No	-	Yes	No	-

  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Small Diameter・Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/Relief Tapered Type-

  MISUMI

  This is a stepped ejector sleeve that is different from the straight type. The wall thickness at the tip can be set to a minimum of 0.3mm, making it thinner than regular products. It has a tapered shape from the sliding part to the escape hole.

  CAD ：

  2D / 3D

  D/P (Shaft diameter)(mm)	V (Hole diameter)(mm)	Material	Head thickness	Product composition	Concentricity between the hole and shaft diameters	Shaft diameter tolerance	Inner dia. tolerance	Surface treatment	Boring method	Tapered or not	Center pin tip shape	Brand
  3 ～ 8	1 ～ 6	SKH51	4mm(T4)	Single sleeve	◎0.005	0/-0.005	+0.005/0	No	Grinding	Yes	No	2.5 ～ 8

  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
D/P (Shaft diameter)(mm)
V (Hole diameter)(mm)
Material
Head thickness
Product composition
Concentricity between the hole and shaft diameters
Shaft diameter tolerance
Inner dia. tolerance
Surface treatment
Boring method
Tapered or not
Center pin tip shape
Brand

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	MISUMI	MISUMI
Product Series	Precision Straight Ejector Sleeves -SKH51/0.6mm Wall-	Short Ejector Sleeves (Bushings for straight ejector pins)	Precision Small Diameter・Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/Relief Tapered Type-
CAD	2D / 3D	2D / 3D	2D / 3D
From
Days to Ship	10 Day(s)	8 Day(s) or more	8 Day(s) or more
D/P (Shaft diameter)(mm)	3.2 ～ 14	2.5 ～ 8	3 ～ 8
V (Hole diameter)(mm)	0.8 ～ 12.2	1 ～ 6.8	1 ～ 6
Material	SKH51	SKH51	SKH51
Head thickness	4mm(T4) / 6mm(JIS) / 8mm(JIS)	4mm(T4)	4mm(T4)
Product composition	Single sleeve	Single sleeve	Single sleeve
Concentricity between the hole and shaft diameters	◎0.005	◎0.01	◎0.005
Shaft diameter tolerance	0/-0.005	0/-0.005	0/-0.005
Inner dia. tolerance	+0.005/0	+0.005/0	+0.005/0
Surface treatment	No	No	No
Boring method	Grinding	-	Grinding
Tapered or not	No	Yes	Yes
Center pin tip shape	No	No	No
Brand	-	-	2.5 ～ 8

Loading...