• You can add up to 6 items per a category to the compare list. Compare

  

  Dedicated for 2x4 (two by four) Construction Method / ZN Nails / Metal Connecting Nails

  KONG JIN

  For 2 × 4 construction, also known as wall frame construction, dedicated nails certified by JIS must be used.

  Type	Thread Nominal (M)	Screw Nominal (inch)	Length	Material	Surface Treatment	Mounting Hole Shape	Nail Head Diameter(mm)	Sales Unit
  Nails	-	-	38.1 ～ 78.3	Stainless	Paint / Coating	-	-	Box / Package

  From: ₹ 10,544.78
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Resin Connecting Nails

  KONG JIN

  Steel nail with resin connection (stick type). It is sold in boxes and packs.

  Type	Thread Nominal (M)	Screw Nominal (inch)	Length	Material	Surface Treatment	Mounting Hole Shape	Nail Head Diameter(mm)	Sales Unit
  Nails	-	-	75 ～ 125	Stainless	Paint / Coating	-	7 ～ 8.1	Box / Package

  From: ₹ 8,199.51
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Raised Countersunk Head Wood Screw【200 Pieces Per Package】

  SUNCO

  A raised countersunk head screw for building materials that is tightened by making a pilot hole in the same way as a self-tapping screw.
  [Features]
  ·As the name suggests, screws used for wood.
  ·The more you tighten it, the more it goes into the wood.
  ·About 2/3 of the overall length is the thread section.
  ·Threads are not applied to the material sandwiched in the middle.
  ·In addition to the tightening force strengthened by being in close contact with, it prevents detents and rattling.
  ·It is possible to substitute a wood screw with a self-tapping screw that can also be used for resin and metal, but the reverse is not possible.
  [Application]
  ·Often used at construction sites.

  Type	Thread Nominal (M)	Screw Nominal (inch)	Length	Material	Surface Treatment	Mounting Hole Shape	Nail Head Diameter(mm)	Sales Unit
  Wood Screws	3.8 ～ 4.5	-	32 ～ 45	Stainless	Paint / Coating	-	-	Box / Package

  From: ₹ 9.35
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kiri-In Hexagonal【100-200 Pieces Per Package】

  SUNCO

  
  · Makes it possible to tighten in one action in locations where it is normally necessary to first drill a pilot hole for an anchor bolt or anchor for hollow walls
  · Pilot holes can be independently formed on 6 mm to 9 mm ASLOC panels using the long cutting edge to perform tightening in a single step
  · Screw that achieves labor-saving fastening and lowers the total cost of mounting
  · It is used for attaching various parts, such as metal fittings, piping saddles, duct metal fittings, switchboards, ventilating fan hoods, etc.

  Type	Thread Nominal (M)	Screw Nominal (inch)	Length	Material	Surface Treatment	Mounting Hole Shape	Nail Head Diameter(mm)	Sales Unit
  Other Screws for Concrete	6	-	70 ～ 90	Steel	Paint / Coating	-	-	Box / Package

  From: ₹ 56.43
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Particleboard Screw Countersinking【800-3,000 Pieces Per Package】

  SUNCO

  
  · Screw developed for MDF and particle board that lack the elasticity of natural wood and have a soft interior, making it harder for screws to catch.
  · The base diameter is much thinner than the screw outer diameter, creating a notable difference between the thread and base and a coarse pitch.
  · The thin base diameter allows it to enter gently without crushing soft materials, and the threading with its large surface area allows the tapping of a wide range of female threads. In addition, on the side in the tip direction of the screw threads, the screwing torque is small because of the acute angle formed at the crests, and an excessive load is not applied to the fitting material. Conversely, the angle of the thread crests on the head side is obtuse. To grasp the fitting material strongly after tightening, the thread crest and valley difference has extremely high draw-out strength. Together with the difference between the angles of the thread crests on the head side and tip side, these characteristics have achieved an outstanding retention force and low screwing torque.
  · Since the thread is tapped from the apex of the screw tip, it bites immediately into the opposite material with good workability to prevent sudden crushing of the opposite material.
  · This "Particle Bit" is an optimized dedicated bit that solves the problems of "screws not working" and "falling out after tightening" that conventional screws have with MDF "particle board" (utility model registered)

  Type	Thread Nominal (M)	Screw Nominal (inch)	Length	Material	Surface Treatment	Mounting Hole Shape	Nail Head Diameter(mm)	Sales Unit
  Other Wood Screws	3	-	16 ～ 40	Steel	Paint / Coating	-	-	Box / Package

  From: ₹ 1.86
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  All-Round Screw【330-500 Pieces Per Package】

  SUNCO

  Hardware + wood substrate base
  Thin Steel Plate + Wood Base Plate

  Type	Thread Nominal (M)	Screw Nominal (inch)	Length	Material	Surface Treatment	Mounting Hole Shape	Nail Head Diameter(mm)	Sales Unit
  Universal Screw	3.7	-	30 ～ 50	Stainless ～ Steel	Paint / Coating	-	-	Box / Package

  From: ₹ 5.03
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

Brand
Product Series
From
Days to Ship
Type
Thread Nominal (M)
Screw Nominal (inch)
Length
Material
Surface Treatment
Mounting Hole Shape
Nail Head Diameter(mm)
Sales Unit

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	KONG JIN	KONG JIN	SUNCO	SUNCO	SUNCO	SUNCO
Product Series	Dedicated for 2x4 (two by four) Construction Method / ZN Nails / Metal Connecting Nails	Resin Connecting Nails	Raised Countersunk Head Wood Screw【200 Pieces Per Package】	Kiri-In Hexagonal【100-200 Pieces Per Package】	Particleboard Screw Countersinking【800-3,000 Pieces Per Package】	All-Round Screw【330-500 Pieces Per Package】
From	₹ 10,544.78	₹ 8,199.51	₹ 1,868.80	₹ 5,642.40	₹ 2,969.60	₹ 2,514.40
Days to Ship	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Type	Nails	Nails	Wood Screws	Other Screws for Concrete	Other Wood Screws	Universal Screw
Thread Nominal (M)	-	-	3.8 ～ 4.5	6	3	3.7
Screw Nominal (inch)	-	-	-	-	-	-
Length	38.1 ～ 78.3	75 ～ 125	32 ～ 45	70 ～ 90	16 ～ 40	30 ～ 50
Material	Stainless	Stainless	Stainless	Steel	Steel	Stainless ～ Steel
Surface Treatment	Paint / Coating	Paint / Coating	Paint / Coating	Paint / Coating	Paint / Coating	Paint / Coating
Mounting Hole Shape	-	-	-	-	-	-
Nail Head Diameter(mm)	-	7 ～ 8.1	-	-	-	-
Sales Unit	Box / Package	Box / Package	Box / Package	Box / Package	Box / Package	Box / Package

Loading...