Transparent Plastic Plates, Plastic Cover Panels（Material：Polycarbonate (PC)）

• You can add up to 6 items per a category to the compare list. Compare

  

  Polycarbonate Plates

  MISUMI

  [Standard large quantity available] 15% discount for 21 to 100 pieces, no estimate required.

  CAD ：

  2D / 3D

  Material	Color	Grade	Hole Machining	Continuous Operating Temperature (High Temperature)(℃)	Continuous Operating Temperature (Low Temperature)(℃)	Volume Resistivity Value(Ω･cm)	Flame Retardancy	Oil	Acid	Alkali	A/B Dimension Tolerance	Shape
  Polycarbonate (PC)	Smoke Brown ～ Transparent	Standard / Antistatic / Abrasion Resistant	2 Holes, Horizontal ～ No Drilling Alteration	80 to 100	-30	＞10^17	-	○ / ×	-	-	±1.0	No Hole Machining (Standard Type) / Number of Holes Selection Type (With 2H to 8H Holes)

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PVC-free Material, Polycarbonate Plate PC (Transparent)

  TAKIRON

  Achieves superior impact strength and glass transparency. Note: Quoted from the 2013 Takiron comprehensive catalog.
  
  [Features]
  · Polycarbonate plates are made from materials with superior impact resistance, even among plastics.
  · Plastic with a transparency equal to glass that refutes the common belief that transparent materials are easy to break.
  · Possesses the highest level of impact-resistance strength while using transparent materials with approximately 20 times the strength of hard vinyl chloride and approximately 40 times the strength of acrylic.
  · Superior light permeability rate of 85% for 5 mm transparent plate, the same transparency as high grade plate glass.
  · Low thermal conductivity (1/5th of glass) and superior heat retention qualities. Useful for insulation.
  · Can be used in a wide range of temperatures, from -40°C to +120°C.
  · 1 mm thickness and resistant to high voltages of up to 30,000 volts. More than twice the insulating value as Bakelite. Optimal as electric insulation material.
  · Weather-resistant grade that prevents yellowing and is barely affected by direct sunlight, wind, rain, temperatures, etc., when compared to other plastic materials. Quality can be selected based on application.
  [Polycarbonate Processing Features]
  1. Little change in load (creep) and easy drilling and cutting.
  2. Vacuum forming and heat bending possible.
  3. Cold forming by bending into a curve under temperatures below room temperature is possible.
  · Food and Hygiene Law / UL certified product / Railway car compliance certified product.

  Material	Color	Grade	Hole Machining	Continuous Operating Temperature (High Temperature)(℃)	Continuous Operating Temperature (Low Temperature)(℃)	Volume Resistivity Value(Ω･cm)	Flame Retardancy	Oil	Acid	Alkali	A/B Dimension Tolerance	Shape
  Polycarbonate (PC)	Transparent	Standard	No Drilling Alteration	-	-	-	-	-	-	-	-	-

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Plastic Sheets

  MISUMI

  · Thin plates from 0.5 to 2.0 mm can be specified in increments of 1 mm.

  CAD ：

  2D / 3D

  Material	Color	Grade	Hole Machining	Continuous Operating Temperature (High Temperature)(℃)	Continuous Operating Temperature (Low Temperature)(℃)	Volume Resistivity Value(Ω･cm)	Flame Retardancy	Oil	Acid	Alkali	A/B Dimension Tolerance	Shape
  Polycarbonate (PC)	Transparent	Standard	2 Holes, Horizontal ～ No Drilling Alteration	-	-	-	-	-	-	-	-	-

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Extra Thin Resin Sheets/Polyacetal/Fluororesin/Polycarbonate

  MISUMI

  Thin Type Plastic Sheets with 0.1~1.0 thickness. Polyacetal, Fluororesin or Polycarbonate can be selected as the product material.

  CAD ：

  2D / 3D

  Material	Color	Grade	Hole Machining	Continuous Operating Temperature (High Temperature)(℃)	Continuous Operating Temperature (Low Temperature)(℃)	Volume Resistivity Value(Ω･cm)	Flame Retardancy	Oil	Acid	Alkali	A/B Dimension Tolerance	Shape
  Polycarbonate (PC)	Transparent	Standard	No Drilling Alteration	-	-	-	-	-	-	-	-	-

  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Material
Color
Grade
Hole Machining
Continuous Operating Temperature (High Temperature)(℃)
Continuous Operating Temperature (Low Temperature)(℃)
Volume Resistivity Value(Ω･cm)
Flame Retardancy
Oil
Acid
Alkali
A/B Dimension Tolerance
Shape

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	TAKIRON	MISUMI	MISUMI
Product Series	Polycarbonate Plates	PVC-free Material, Polycarbonate Plate PC (Transparent)	Plastic Sheets	Extra Thin Resin Sheets/Polyacetal/Fluororesin/Polycarbonate
CAD	2D / 3D		2D / 3D	2D / 3D
From
Days to Ship	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	8 Day(s) or more
Material	Polycarbonate (PC)	Polycarbonate (PC)	Polycarbonate (PC)	Polycarbonate (PC)
Color	Smoke Brown ～ Transparent	Transparent	Transparent	Transparent
Grade	Standard / Antistatic / Abrasion Resistant	Standard	Standard	Standard
Hole Machining	2 Holes, Horizontal ～ No Drilling Alteration	No Drilling Alteration	2 Holes, Horizontal ～ No Drilling Alteration	No Drilling Alteration
Continuous Operating Temperature (High Temperature)(℃)	80 to 100	-	-	-
Continuous Operating Temperature (Low Temperature)(℃)	-30	-	-	-
Volume Resistivity Value(Ω･cm)	＞10^17	-	-	-
Flame Retardancy	-	-	-	-
Oil	○ / ×	-	-	-
Acid	-	-	-	-
Alkali	-	-	-	-
A/B Dimension Tolerance	±1.0	-	-	-
Shape	No Hole Machining (Standard Type) / Number of Holes Selection Type (With 2H to 8H Holes)	-	-	-

Loading...