Spray Nozzles（Type：Two-Fluids）

• You can add up to 6 items per a category to the compare list. Compare

  

  Fine Mist Generating 2-Fluid Nozzle, Small Spray Volume Flat Fan Shape, BIMV Series (Pressurized Liquid Type)

  IKEUCHI

  [Features]
  ·A two-fluid fan-shaped nozzle that produces a "fine mist" with an average particle size of 100 microns or less.
  ·It is a liquid pressurized type that applies a pressure of about 0.1 to 0.3 MPa to the sprayed liquid and has a wide range of flow rate adjustment.
  ·Three spray angles: 110°, 80°, and 45°.
  ·A single nozzle can be used for either an even distribution over the entire fan-shaped area, or a distribution that is strong in the center and gradually weakens toward the ends.
  [Applications]
  ·Spraying: Mold release agent, deodorizer, oil, surface treatment agent, corrosion inhibitor, lubricant, honey, insect repellent, urea water, etc.
  ·Cooling: Molds, gases, steel plates, steel pieces, castings, car bodies, painted materials, sheet glass, plastics, etc.
  ·Humidity control: Paper, waste gas, ceramics, concrete, etc.
  ·Washing: Precision circuit boards, glass tubes, etc.

  Spray Pattern	Type	Fluid	Material	Features	Applicable Fluid	Spraying Angle θ (at 0.5MPa)(deg)
  Fan	Two-Fluids	Two-Fluid Mixed	Stainless Steel	Small Particle Mist Generated	Compressed Air / Oil / Chemicals / Water / Ammonia Water / Others	45 ～ 110

  From: ₹ 12,257.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High-Viscosity Liquid Atomizing Spray Nozzle Mini Atomizing Nozzle MMAE/MMA Type

  EVERLOY

  Can atomize and spray low- to high-viscosity liquids. Wide range available, starting with very low flow rates. Fluid passage diameter is large to prevent clogging. Simple structure that makes disassembly and maintenance easy.
  

  Spray Pattern	Type	Fluid	Material	Features	Applicable Fluid	Spraying Angle θ (at 0.5MPa)(deg)
  Full Cone / Full Pyramid	Two-Fluids	Two-Fluid Mixed	Stainless Steel	Mist	Solution / Water	-

  From: ₹ 30,384.51
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Two-Fluid Nozzles

  MISUMI

  ◆Features: A nozzle that can spray a fine mist by mixing liquid and air at the same time.
      Small and lightweight, it can be used in tight spaces.
      By adjusting the pressure, the flow rate of liquid and air can be adjusted.
      The higher the air ratio (air-water volume ratio), the finer the particles.
  ◆Fluid: water and air◆Material: SUS303

  • Volume Discount

  CAD ：

  2D / 3D

  Spray Pattern	Type	Fluid	Material	Features	Applicable Fluid	Spraying Angle θ (at 0.5MPa)(deg)
  Fan	Two-Fluids	Two-Fluid Mixed	Stainless Steel	Small Particle Mist Generated	-	-

  From: ₹ 18,436.55
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fine Mist Generating 2-Fluid Nozzle, Small Spray Volume Fully-Coned Shape, BIM-PP Series (Liquid Pressurizing)

  IKEUCHI

  A "fine mist" two-liquid nozzle made using polypropylene (PP) resin as the chief material for the main unit, providing excellent chemical resistance. A liquid pressurizing type in which a spray is produced by applying a pressure of approximately 0.1–0.3 MPa to the spray liquid.

  Spray Pattern	Type	Fluid	Material	Features	Applicable Fluid	Spraying Angle θ (at 0.5MPa)(deg)
  Full Cone / Full Pyramid	Two-Fluids	Two-Fluid Mixed	Plastic	Small Particle Mist Generated	Compressed Air / Chemicals / Water / Others	20

  From: ₹ 7,676.42
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fine Mist Generating 2-Fluid Nozzle, Small Spray Volume, Full Cone-shaped, BIMJ Series (Liquid Pressurized Type)

  IKEUCHI

  A fully coned nozzle that produces a "fine mist" with a mean particle size of 100 microns or less. A liquid pressurizing type in which a spray is produced by applying a pressure of approximately 0.1–0.3 MPa to the spray liquid. Features a wide adjustable flow rate range.

  Spray Pattern	Type	Fluid	Material	Features	Applicable Fluid	Spraying Angle θ (at 0.5MPa)(deg)
  Full Cone / Full Pyramid	Two-Fluids	Two-Fluid Mixed	Stainless Steel	Small Particle Mist Generated	Compressed Air / Oil / Chemicals / Water / Ammonia Water / Others	20 ～ 70

  From: ₹ 12,257.15
  Days to Ship: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fine Mist Generating 2-Fluid Nozzle, Small Spray Volume Hollow-Cone Shape, BIMK Series (Liquid Pressurizing)

  IKEUCHI

  A two-liquid hollow coned nozzle that produce a "fine mist" with a mean particle size of 100 microns or less. A liquid pressurizing type in which a spray is produced by applying a pressure of approximately 0.1–0.3 MPa to the spray liquid. Features a wide adjustable flow rate range.

  Spray Pattern	Type	Fluid	Material	Features	Applicable Fluid	Spraying Angle θ (at 0.5MPa)(deg)
  Hollow-Cone Shape	Two-Fluids	Two-Fluid Mixed	Stainless Steel	Small Particle Mist Generated	Compressed Air / Oil / Chemicals / Water / Ammonia Water / Others	60

  From: ₹ 17,775.45
  Days to Ship: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fine Mist Generating 2-Fluid Nozzle, Small Spray Volume Flat Fan Shape, BIMV Series (Suction)

  IKEUCHI

  A two-fluid flat spray nozzle that generates a "fine mist" with a mean particle size of 30 microns or less. A suction type that does not require a pressurizer for the liquid supply.

  Spray Pattern	Type	Fluid	Material	Features	Applicable Fluid	Spraying Angle θ (at 0.5MPa)(deg)
  Fan	Two-Fluids	Two-Fluid Mixed	Stainless Steel	Small Particle Mist Generated	Compressed Air / Oil / Chemicals / Water / Ammonia Water / Others	80

  From: ₹ 12,270.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fine Mist Generating 2-Fluid Nozzle, Small Spray Volume Hollow-Cone Shape, BIMK Series (Suction)

  IKEUCHI

  A two-liquid hollow coned nozzle that produce a "fine mist" with a mean particle size of 100 microns or less. A liquid pressurizing type in which a spray is produced by applying a pressure of approximately 0.1–0.3 MPa to the spray liquid. Features a wide adjustable flow rate range.

  Spray Pattern	Type	Fluid	Material	Features	Applicable Fluid	Spraying Angle θ (at 0.5MPa)(deg)
  Hollow-Cone Shape	Two-Fluids	Two-Fluid Mixed	Stainless Steel	Small Particle Mist Generated	Compressed Air / Oil / Chemicals / Water / Ammonia Water / Others	60

  From: ₹ 17,775.45
  Days to Ship: 10 Day(s) or more

  10 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Spray Pattern
Type
Fluid
Material
Features
Applicable Fluid
Spraying Angle θ (at 0.5MPa)(deg)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	IKEUCHI	EVERLOY	MISUMI	IKEUCHI	IKEUCHI	IKEUCHI	IKEUCHI	IKEUCHI
Product Series	Fine Mist Generating 2-Fluid Nozzle, Small Spray Volume Flat Fan Shape, BIMV Series (Pressurized Liquid Type)	High-Viscosity Liquid Atomizing Spray Nozzle Mini Atomizing Nozzle MMAE/MMA Type	Two-Fluid Nozzles	Fine Mist Generating 2-Fluid Nozzle, Small Spray Volume Fully-Coned Shape, BIM-PP Series (Liquid Pressurizing)	Fine Mist Generating 2-Fluid Nozzle, Small Spray Volume, Full Cone-shaped, BIMJ Series (Liquid Pressurized Type)	Fine Mist Generating 2-Fluid Nozzle, Small Spray Volume Hollow-Cone Shape, BIMK Series (Liquid Pressurizing)	Fine Mist Generating 2-Fluid Nozzle, Small Spray Volume Flat Fan Shape, BIMV Series (Suction)	Fine Mist Generating 2-Fluid Nozzle, Small Spray Volume Hollow-Cone Shape, BIMK Series (Suction)
CAD			2D / 3D
From	₹ 12,257.15	₹ 30,384.51	₹ 18,436.55	₹ 7,676.42	₹ 12,257.15	₹ 17,775.45	₹ 12,270.55	₹ 17,775.45
Days to Ship	5 Day(s) or more	11 Day(s) or more	6 Day(s) or more	5 Day(s) or more	10 Day(s) or more	10 Day(s) or more	5 Day(s) or more	10 Day(s) or more
Spray Pattern	Fan	Full Cone / Full Pyramid	Fan	Full Cone / Full Pyramid	Full Cone / Full Pyramid	Hollow-Cone Shape	Fan	Hollow-Cone Shape
Type	Two-Fluids	Two-Fluids	Two-Fluids	Two-Fluids	Two-Fluids	Two-Fluids	Two-Fluids	Two-Fluids
Fluid	Two-Fluid Mixed	Two-Fluid Mixed	Two-Fluid Mixed	Two-Fluid Mixed	Two-Fluid Mixed	Two-Fluid Mixed	Two-Fluid Mixed	Two-Fluid Mixed
Material	Stainless Steel	Stainless Steel	Stainless Steel	Plastic	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
Features	Small Particle Mist Generated	Mist	Small Particle Mist Generated	Small Particle Mist Generated	Small Particle Mist Generated	Small Particle Mist Generated	Small Particle Mist Generated	Small Particle Mist Generated
Applicable Fluid	Compressed Air / Oil / Chemicals / Water / Ammonia Water / Others	Solution / Water	-	Compressed Air / Chemicals / Water / Others	Compressed Air / Oil / Chemicals / Water / Ammonia Water / Others	Compressed Air / Oil / Chemicals / Water / Ammonia Water / Others	Compressed Air / Oil / Chemicals / Water / Ammonia Water / Others	Compressed Air / Oil / Chemicals / Water / Ammonia Water / Others
Spraying Angle θ (at 0.5MPa)(deg)	45 ～ 110	-	-	20	20 ～ 70	60	80	60

Loading...