Air Tube/Nylon Tube

Tube Cutter

PISCO

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

Tubes can be cut to the desired length with the built-in measure.

Tube Items/Tube Clips

MISUMI

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

A tube clip. [Material]SUS304D/SPCC

• Volume Discount

CAD ：

2D / 3D

ALE Type L-Flex Spatter-Resistant Tube

CHIYODA

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

[Features]
· Inner TE tube. The features of TP tubes are all inherited. At welding sites, the tube can be used for both air and cooling water (industrial water) without separation
・ Wide color variations. Convenient for pipe management
・ 3-layer tube. The LE inner is coated with an aluminum film to further improve spatter resistance and the strongest specification for sputter tubes

Water Resistant Polyurethane Tubes

MISUMI

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

Tubes/Water Resisting Polyurethane
Polyurethane Tubes are used in various industries especially in penumatic system. They offer a wide variety of sizes to choose from.
[Feature]
● Outer Diameter (mm.) : 3.2, 4, 6, 8, 10, 12 and 16
● Inner Diameter (mm.) : 1.8, 2.5, 4, 5, 6.5, 8 and 11
● Length (m.) : 20, 100 and can configurable between 0.5 to 19.5 m, and the minimum length can be increased by increments 0.5 m.
● Maximum operating pressure (MPa) : 0.8
● Operating Temperature Range (℃) : -5 to 60
● Material : Polyurethane
● Color : Black, White, Red, Blue, Yellow, Green and Transparent and Transparent Blue
[Application]
This Polyurethane Tube is used to connect with pneumatic equipments such as cylinders, fitting, directional control valve and so on.

• Volume Discount

CAD ：

2D / 3D

Nylon Tube, for Multipurpose Application Piping, N2

NITTA

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

[Features]
・ Excellent oil resistance and chemical resistance
・ Group 2 types can be used up to 4.8 MPa (at 20 °C)
・ It has excellent abrasion resistance

Mega Touch Tube MTP Polyurethane Tube

CHIYODA

A polyurethane tube with a wide inner diameter and a large flow rate.
[Features]
・ Air leaks are hard to occur and tubes can be attached and removed smoothly
・ Can be used for air and industrial water piping
・ It has excellent flexibility and the minimum bending radius of the tube is smaller than other tubes, so it can be used for piping in narrow places
・ Prints cut marks at 1-m intervals, ideal for cutting work and inventory management
・ Excellent oil resistance
・ Excellent outer diameter accuracy
[Application]
・ Most suitable for industrial water piping, air piping in general (equipment piping, equipment piping, air tools, etc.)

Fluoropolymer tubes (PTFE)

ESCO

【Product Specifications】
・Material-Fluororesin
・Max operating temperature-260℃
・Operating pressure (normal temperature)
・Characteristics-Excellent electric insulation and heat, adhesion, and chemical resistances
・OD x ID…4 x 3mm
・Length…2m
・Pressure(MPa)…1.0

Line Spiral Hose

CHIYODA

A lightweight spiral hose with reduced tangling.

Tubes/Nylon

MISUMI

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

Tubes/Nylon
Air Tubes are used in various industries especially in penumatic system. They offer a wide variety of sizes to choose from.
[Feature]
● Outer Diameter (mm.) : 3.2, 4, 6, 8, 10 and 12
● Inner Diameter (mm.) : 2, 2.5, 4, 6, 7.5, and 9
● Length (m.) : 10, 20 and configurable between 0.5 to 19.5 m, and the minimum length can be increased by increments 0.5 m.
● Material : Nylon (Polyamide)
● Color : Black and White
[Application]
This Nylon Tube is used to connect with pneumatic equipments such as cylinders, fitting, directional control valve and so on.

CAD ：

2D / 3D

Polyurethane Braided Hose Flameproof type

TRUSCO NAKAYAMA

[Features]
● Made of flame-retardant polyurethane resin to prevent melting and fire due to sparks during sputtering.
● Features lightweight, flexibility and abrasion resistance compatible to polyurethane hose for easy handling.
● Water-resistant polyurethane outer layer is weatherproof for outdoor use.
● Can be cut to the required length for the application and location.

[Application]
● Controllers for pneumatic devices and instrumentation.

Straight Fluororesin (PFA) Tube for Corrosion Resistance

PISCO

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

Straight tube for corrosive environments (chemical, medical, food, semiconductor related).
[Features]
·Excellent chemical resistance, heat resistance, weather resistance
·High degree of internal smoothness, transparency and purity
[Application]
·Chemical-related, medical-related, pharmaceutical-related, food-related

P-Flex Series, Hot-Water-Resistant Polyurethane Tube

CHIYODA

Polyurethane tube for cooling water.
[Features]
・ Ideal for cooling water piping. A material that is extremely resistant to hot water, ideal for cooling water piping, and can be used with air
・ Excellent oil resistance. Ideal for factory air and industrial water piping
・ Excellent outer diameter accuracy. Outer diameter accuracy is listed in the specification column
・ Excellent heat resistance
・ Excellent flexibility. Very small bend radius and easy to handle
[Application]
・ Cooling water piping in general (Molds, robots, etc.)

Air Hoses/Standard

MISUMI

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

[Features]·This air hose is extremely lightweight and has high cold and oil resistance.

• Volume Discount

CAD ：

2D / 3D

Soft Polyurethane Tubes

MISUMI

Tubes/Soft Polyurethane
Polyurethane Tubes are used in various industries especially in penumatic system. They offer a wide variety of sizes to choose from.
[Feature]
● Outer Diameter (mm.) : 4, 6, 8, and 10
● Inner Diameter (mm.) : 2.5, 4, 5, and 6.5
● Length (m.) : 10, 20 and can configurable between 0.5 to 19.5 m, and the minimum length can be increased by increments 0.5 m.
● Maximum operating pressure (MPa) : 0.4
● Operating Temperature Range (℃) : -5 to 60
● Material : Soft Polyurethane
● Color : Black and Transparent
[Application]
This Polyurethane Tube is used to connect with pneumatic equipments such as cylinders, fitting, directional control valve and so on.

CAD ：

2D / 3D

Two-Core Twin Coiling Tube for General Piping

PISCO

A 2-core coiling tube for general-purpose piping.

Touch Tube TP Polyurethane Tube

CHIYODA

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

A polyurethane tube with excellent oil resistance.
[Features]
・ Excellent outer diameter accuracy
・ Excellent flexibility and very small bending radius
・ Prints cut marks at 1-m intervals, ideal for cutting work and inventory management
・ Excellent mechanical strength, especially abrasion resistance, ideal for equipment piping and robot piping
[Application]
・ Most suitable for all air piping (in-appliance piping, equipment piping, air tools, etc.)
・ Excellent in oil resistance, ideal for air piping in factories

TE-AF Type Spatter-Resistant Tube

CHIYODA

[Features]
·Single layer spatter-resistant tube: A single-layer spatter-resistant tube with a flame-retardant material processed into the TE tube main body, eliminating the need for peeling during piping.
·A wide variety of color variations: Convenient for piping management.
·TE tube-based: The features of TE tube are all inherited.

Chiyoda Polyurethane Hose

CHIYODA

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

A soft air Hose suitable for low pressure robot piping.
[Features]
・ Excellent in oil resistance, ideal for air piping in the factory
・ Excellent flexibility
・ Very soft tube allows for very easy connection to hose fittings
[Applications]
・ Most suitable for all air piping (equipment piping, air tools, etc.)

Coiled Hose

MUROMOTO TEKKO

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

Small wound diameter at φ28mm. Offers a wide range of uses, including air-driven equipment. Internal diameter of tube 5, external diameter 8.

Urethane Tube U2 for General Air Pressure

NITTA

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

[Features]
・ It has a good balance of flexibility and pressure resistance performance and excellent workability, and is suitable for general air piping applications
・ Since it uses an ether polyurethane resin, corrosion and deterioration due to moisture and mold under high temperature and high humidity are reduced
・ Coil processing and welding processing are possible

Junflon FEP Tube (Fluoropolymer Tube)

JUNKOSHA

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

[Features]
・ It has excellent heat and cold resistance
・ Inert against most chemicals and solvents
・ Excellent weather resistance and no secular change
・ Most things do not adhere easily, and even if they adhere, they can be easily removed
・ It is flame retardant
・ Excellent electrical characteristics
・ No risk of elution of toxic substances
[Application]
・ Tube for corrosive fluid transfer
・ Tube for solvent / chemical solution transfer
・ Tube for adhesive fluid transfer
・ Tube for food plant
・ Tube for various liquid transfer
・ Various equipment that requires heat resistance, high insulation, and high frequency characteristics

Fluorine Resin Tube, Clean, Heat Resistant, Cold Resistant, and Chemical Resistant, TP

NITTA

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

[Features]
・ Uses FEP (tetrafluoroethylene / hexafluoropropylene copolymer) resin with excellent chemical resistance
・ Manufactured in a cleanroom, the tube terminal is sealed with a cap, and shipped in heat-sealed packaging
・ Excellent detergency and extremely little adhesion of chemicals, etc.
・ This product can be used for the Clean Push-One Fitting "Chemfit C1 Series"
・ A tube that does not change over time and has excellent weather resistance
・ It can be used even in an environment such as an ozone atmosphere
・ Compliant with Ministry of Health, Labour and Welfare of Japan Notification No. 201 (2006) and Ministry of Health, Labour and Welfare Notification No. 370 (1959)

Tubes/Polyurethane/for Compressed Air

MISUMI

A compact air fitting tube. [Fluid Used]Water/air

• Volume Discount

CAD ：

2D / 3D

Straight Polyurethane Tubes for General Piping

PISCO

Urethane tube with superior flexibility.

[Features]
· Excellent flexibility.
· Ideal for general pressure pipes that need a small bend radius.
· Many tube colors.
· A cut mark is displayed at intervals of 500mm, which is useful when cutting the tube.
· We also manufacture long length tubes by custom order.

Nylon Tube, Flexible Nylon N5

NITTA

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

Nylon Tube, Flexible Nylon N5
These Air tubes offer excellent abrasion resistance, oil and chemical resistance. They come in a wide variety of sizes to choose from.
[Feature]
● Outer Diameter Minimum/Maximum (mm.) : 4 to 16
● Inner Diameter Minimum/Maximum (mm.) : 2 to 13
● Length (m.) : 1 to 10, 20 and 100
● Applicable Fluid : Water, Air, Chemical and General Hydraulic Oil
● Operating temperature range (℃) :
Air = -40 to +100
Water = 0 to +50
General hydraulic oil = -40 to +100
● Material : Soft nylon
● Color : Black, Milky White, Red, Blue, Yellow and Green
[Application]
This Nylon Tube is used to connect with various equipment

Tubes/Fluororesin Type

MISUMI

Tubes/Fluororesin Type
Air Tubes are used in various industries especially in penumatic system. They offer a wide variety of sizes to choose from.
[Feature]
● Outer Diameter (mm.) : 3.2, 4, 6, 8, 10 and 12
● Inner Diameter (mm.) : 1.6, 2 , 4 , 6, 8 and 10
● Length (m.) : 10, 20 and configurable between 0.5 to 19.5 m, and the minimum length can be increased by increments 0.5 m.
● Maximum operating air pressure (MPa) : 0.75, 1, 1.1, 1.7 and 2.5 depends on the sizes
● Material : Fluororesin (PFA)
● Color : White
[Application]
Fluororesin Tube is used to connect with pneumatic equipments such as cylinders, fitting, directional control valve and so on.

• Volume Discount

CAD ：

2D / 3D

New Urethane Tube, NU Series

CKD

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

Allows both a larger internal diameter and increased strength with the same external diameter.

L-Flex Polyurethane Tube for Spattering Prevention

CHIYODA

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

Air piping tube suitable for welding environment.
[Features]
・ Anti-spatter tube coated with polyolefin resin
・ Very small bend radius and easy to handle
・ A tube with spatter resistance that can be used with both air and cooling water
・ Inner TE tube. Inheriting the same features as TP tubes. Can be used without distinction between cooling water (industrial water) and air at welding points
・ Wide color variations. Convenient for pipe management
・ 2-layer structure. Improved spatter resistance by separating the inner tube (TE) and outer skin (flame retardant)
[Applications]
・ Ideal for welding parts air piping (welding jigs, welding robots, welding machines, etc.)
・ Convenient for cutting chips (around lathe, etc.)

Fluoropolymer Tube TA, Clean, Heat Resistant, Cold Resistant, Chemical Resistant

NITTA

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

[Features]
・ Uses PFA (tetrafluoroethylene / perfluoroalkyl vinyl ether copolymer) resin with excellent chemical resistance
・ Manufactured in a cleanroom, the tube terminal is sealed with a cap, and shipped in heat-sealed packaging
・ It has excellent cleaning properties and reduces the adhesion of chemicals
・ A tube that does not change over time and has excellent weather resistance
・ It can be used even in an environment such as an ozone atmosphere
・ Can also be used for the clean fitting "Chemfit CSE Series"
・ Compliant with Ministry of Health, Labour and Welfare of Japan Notification No. 201 (2006) and Ministry of Health, Labour and Welfare Notification No. 370 (1959)

Junflon PFA Tube (Fluoropolymer Tube)

JUNKOSHA

[Features]
・ It has excellent heat and cold resistance
・ Inert against most chemicals and solvents
・ Excellent weather resistance and no secular change
・ Most things do not adhere easily, and even if they adhere, they can be easily removed
・ It is flame retardant
・ Excellent electrical characteristics
・ No risk of elution of toxic substances
[Applications]
・ Tube for corrosive fluid transfer
・ Tube for solvent / chemical solution transfer
・ Tube for adhesive fluid transfer
・ Tube for food plant
・ Tube for various liquid transfer
・ Various equipment that requires heat resistance, high insulation, and high frequency characteristics

Tubes/Spiral Shape Type

MISUMI

[Features]·It can be used to bundle and protect tubes and cables, and allows flexible conducting wire and branching.

• Volume Discount

CAD ：

2D / 3D

Tube Items/Soft Tube Inserts【1-10 Pieces Per Package】

MISUMI

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

[Features]·Shrinkage of tube can be prevented from inside.

• Volume Discount

CAD ：

2D / 3D

Touch Tube TE Water-Resistance Polyurethane Tube

CHIYODA

A polyurethane tube with excellent water and oil resistance, suitable for equipment piping.
[Features]
・ Air leaks are hard to occur and tubes can be attached and removed smoothly
・ Piping is possible regardless of air or industrial water
・ It has excellent flexibility and the minimum bending radius of the tube is smaller than other tubes, so it can be used for piping in narrow places
・ Excellent mechanical strength, especially abrasion resistance, ideal for equipment piping and robot piping
・ Excellent outer diameter accuracy
・ Prints cut marks at 1-m intervals, ideal for cutting work and inventory management
・ Easy to check the remaining number
[Applications]
・ Most suitable for industrial water piping, air piping in general (equipment piping, equipment piping, air tools, etc.)

Spiral Air Hose, Yellow Line TPS Type

CHIYODA

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

Spiral wrap with fittings suitable for air blow guns and work tools.
[Features]
・ Added resilience in addition to oil resistance
・ Ideal for use with air tools such as air dusters and impact wrenches
・ The TE tube specification has the best balance of flexibility and resilience
・ Wide variation in tube size and usage range
[Applications]
・ Most suitable for piping for air tools and air blow guns

Junron Hybrid Tube (Inner-Layer Fluoride Polymer Tube), Junron AP1

JUNKOSHA

The two-layer structure achieves higher levels of flexibility, kink resistance and wear resistance. Fluoride polymer for the inner layer provides superior repelling power against liquid chemicals. Layers are fully adhered because it is integrally molded.

Tube Cutters【1-10 Pieces Per Package】

MISUMI

Tube Cutters
These tube cutters, which have a built-in 1-meter measuring feature, are equipment designed for cutting air tubes.
[Feature]
● New edges can be used by turning the chevron blade 180 degrees
● The tube cutter can be safe stored using the lock mechanism
● The tube can be cut at a desired length using the built-in measure
● The tube cutter replacement blade product code is : TCKE
[Application]
It is use for cutting air tubes.

CAD ：

2D / 3D

Straight Polyurethane Tube for Piping in Clean Environments

PISCO

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

Cleanroom (ISO class 6 equivalent) compatible tube.
[Features]
·After cleaning with clean air, it was packaged in a cleanroom (equivalent to ISO class 6).
·Ideal for pneumatic piping that requires a small bend radius.
·Cut marks are displayed at intervals of approx. 500 mm, which is useful when cutting the tube.
·Made of polyurethane, which offers excellent flexibility and is ideal for compact piping.
[Application]
·Ideal for use in chemistry, medical, pharmaceutical, food, etc.

General Piping Straight Soft Nylon Tube

PISCO

A tube that is robust against bending fatigue for a long, stable service life.
[Features]
·It has excellent pressure resistance, can be used at high pressure, and can also be used for hot water and heat medium oil
·Cut marks are displayed at intervals of approx. 500 mm, which is convenient when cutting tubes
·Has excellent pressure resistance, abrasion resistance, and cold resistance, is resistant to bending fatigue, and can be used stably for a long time
[Application]
·Ideal for mold cooling water piping as a hot water resistant tube

Straight Polyurethane Tube for General Piping Dedicated for Air

PISCO

Urethane tubes with excellent mechanical strength and oil resistance.
[Features]
·It has excellent flexibility and is ideal for compact piping that requires a small bending radius.
·There are 2 tube colors, black and clear blue.
·Cut marks are displayed at intervals of approx. 500 mm, which is useful when cutting the tube.
[Application]
·Equipment for assembly equipment, equipment for semiconductor manufacturing processes. For filling machine related, etc.
·Servers that generate hydrogen water, automatic packaging machines for pharmaceutical products, etc.

Slim L-Flex Sputter Preventing Polyurethane Tube

CHIYODA

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

Tube with flexibility in addition to sputtering resistance.

[Features]
· Achieves both sputtering resistance and flexibility. By thinning the outer skin of a conventional L-Flex tube, sputtering resistance is improved and excellent flexibility is provided.
· Lightweight 25% lighter weight compared to conventional L-Flex tubing.
· Excellent outer skin peeling properties. The outer skin is easier to peel and construction is easier than with conventional two-layer tubing

Spiral Air Hose, Yellow Line SPH Type

CHIYODA

[Features]
· Spiral tube with excellent flexibility and oil resistance

Nylon Tube Hard (Non-Plastic) Nylon N1

NITTA

Nylon Tube Hard (Non-Plastic) Nylon N1
This is a 100% unplasticized nylon resin air used in various industries especially in high-pressure applications. They offer a wide variety of sizes to choose from.
[Feature]
● Outer Diameter (mm.) : 6, 6.35 and 8
● Inner Diameter (mm.) : 4, 4.57 and 6
● Length (m.) : 20 and 100
● Applicable Fluid : Water / Air / General Hydraulic Oil
● Material : Nylon
● Color : Black and Milky White
[Application]
This Nylon Tube is used in various industries

Junron UF (Polyurethane Micro Tube)

JUNKOSHA

[Features]
・ Excellent mechanical strength, especially abrasion resistance
・ It has excellent heat and cold resistance
・ Flexible and has high impact resilience
・ No risk of elution of toxic substances
・ Small bending radius and excellent workability
[Applications]
・ Tube for pneumatic equipment
・ Tube for fluid element
・ Pneumatic tube for chemical plant

Multi-Layer Fluorine Tube REF5

AOI

[Features]
・ By adopting fluoropolymer FEP for the inner layer, the same level of cleaning performance and liquid repellency as those of the single layer fluorine tube has been achieved.
・ In addition, since it has a high moisture barrier property, it can also be used for fluids that react with moisture (such as paint curing agents).
・ As the outer layer nylon elastomer has a high gas barrier property, air inclusion (bubble generation) into the fluid can be reduced.
・ Also, since it is hard to break and is resistant to abrasion and scratches, it can be used for piping of robots, etc.

Tubes/Soft Nylon Tubes

MISUMI

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

Tubes/Soft Nylon Tubes
Air Tubes are used in various industries. They offer a wide variety of sizes to choose from.
[Feature]
● Outer Diameter (mm.) : 4, 6, 8, 10 and 12
● Inner Diameter (mm.) : 2.5, 4, 6, 7.5, and 9
● Length (m.) : 20 and configurable between 0.5 to 19.5 m, and the minimum length can be increased by increments 0.5 m.
● Material : Nylon (Soft)
● Color : Black and White
[Application]
This Nylon Tube is used to connect with pneumatic equipments such as cylinders, fitting, directional control valve and so on.

• Volume Discount

CAD ：

2D / 3D