For General Piping, Tube Fitting, Branch Tee

PISCO

[Features]
• One-touch fitting for general pneumatic pipe use
• Wide variety of options available
• In-situ adjustment of the resin body take-off angle
• Enables centralized piping
• Light gray and clean room packaged options available
• Fluorinated grease used to meet clean room packaging specifications
• Item is package in an ISO 6 clean room, following purification with clean air

CAD ：

2D / 3D

for General Piping, Tube Fitting Branch Triple

PISCO

Variety of types available with one-touch fitting for general piping.

CAD ：

2D / 3D

Quick-Connect Fitting, Y Type, Screw Mount Branch

MISUMI

[Features]·The seal material is nitrile rubber.

• Volume Discount

CAD ：

2D / 3D

For General Piping, Tube Fitting, Triple Branch A

PISCO

A complete line of quick connect fittings.
[Features]
· Quick-connect fitting for general pneumatic piping.
· After installation, you can change the take-off angle of the resin main body. (applicable to some products)
· Allows centralized piping.
· Light gray specifications and cleanroom packaging specifications are also available as options.
· The cleanroom packaging specification uses fluorine-based grease.
· The product is washed with clean air and then packaged in a cleanroom (ISO class 6 equivalent).
[Applications]
· The standard specifications enable the use of water and are ideal for temperature control of molds and dies.
· After installation, you can change the take-off angle of the resin body. (applicable to some products)

CAD ：

2D / 3D

New Joint GWT □-□ Series【1-10 Pieces Per Package】

CKD

White body flame retardant type. Electroless nickel plating to the brass part

CAD ：

2D / 3D

For General Piping, Tube Fitting, Tee

PISCO

A rich assortment of single-touch fittings for general piping.

CAD ：

2D / 3D

Tube Fitting Branch Female Branch A for General Piping

PISCO

Standard quick-connect fitting for general piping.
[Features]
·A wide lineup of products.
·After installation, you can change the take-off angle of the resin body.
·17 shapes have been updated, achieving weight reduction.
·High performance and high quality. The lock claws evenly grip the circumference of the tube. Even after many years, tubes still attach and detach like new. Unique elastic sleeve design shuts out air leaks.
·Enables centralized piping.
·A wide assortment of sizes of reducings is available. 1 fitting can be used where conventionally 2 fittings were required. By reducing the number of fittings used, you can reduce costs and space.
·A cleanroom packaging specification that is ideal for piping in a clean environment (optional). Fluorine-based grease is used as the grease, and after being washed with clean air, it is packaged in a cleanroom (equivalent to ISO class 6).
·With clean washing specifications ideal for various particle- and oil-averse production processes (optional). The product is vacuum sealed after ultrasonic vacuum cleaning with HFE (hydrofluoroether) in a cleanroom.

CAD ：

2D / 3D

Touch Connector Fuji, Single Banjo

CHIYODA

One-touch fittings with a rotation lock ring to prevent rotation out of the tube. Single banjo; select from a metal or plastic body. Branch type also available.

CAD ：

2D

Touch Connector FUJI, Double Banjo

CHIYODA

One-touch fittings with a rotation lock ring to prevent rotation out of the tube. Double banjo; select from a metal or plastic body. 2-4 branching type also available.

CAD ：

2D

Quick-Connect Fitting, Y Type

EASUN

Y type single-touch fitting. The applicable tube diameters that can be selected are ⌀4, 6, 8, 10, and 12. We keep items in stock to enable same-day shipping. Note that some products are only sold in lots. (Example: Minimum order quantity of 50 pieces.) Chinese pneumatic device-related product manufacturer, founded in 1986. The company obtained ISO 9001 certification in 1998, and their products are highly regarded around the world for their stable quality.

CAD ：

2D / 3D

New Joint GW-FP1 Series for Food Manufacturing Process【10 Pieces Per Package】

CKD

It supports food manufacturing. Food grade (NSF H1) is used for the lubricant oil for the flow path and sliding parts to eliminate pollution concerns. Space-saving compact size quick-connect fitting for pneumatic piping.
[Features]
・ New joint series that has achieved a significant reduction in piping space.
・ V-shaped seal is used for the tube insertion seal to enable smooth insertion and secure sealing.
・ The elbow union type is rotatable, making piping work and piping removal work easy.
・ A flame-retardant white body that fits a comfortable working environment, and electroless nickel plating is used for the brass part.
・ The GW Series uses flame-retardant resin (equivalent to UL94 standard V-0) for the body and push ring.
[Applications]
・ As pneumatic pipe, tube fittings, single-action joints, air fittings, resin fittings, universal elbows.

CAD ：

2D / 3D

One-Touch Couplings for Clean Applications - Tees

MISUMI

[Features]·A quick-connect fitting suitable for clean environments. [Material]·It is polypropylene.

• Volume Discount

CAD ：

2D / 3D

For General Piping, Tube Fitting, Double Branch A

PISCO

A complete line of one-touch fittings.
[Features]
·Quick-connect fitting for general pneumatic piping.
·After installation, you can change the take-off angle of the resin main body. (applicable to some products)
・ Allows centralized piping.
・ Light gray specifications and cleanroom packaging specifications are also available as options.
・ The cleanroom packaging specification uses fluorine-based grease.
· The product is washed with clean air and then packaged in a cleanroom (ISO class 6 equivalent).
[Applications]
·The standard specifications enable the use of water and are ideal for temperature control of molds and dies.
·After installation, you can change the take-off angle of the resin body.

CAD ：

2D / 3D

Corrosion-Resistant SUS303 Equivalent Fitting Tee

PISCO

No copper-based metal used. Also optimal for dealing with low-concentration ozone .

[Features]
· Perfect when additional strength is required for corrosive atmosphere applications.
· Metal body uses special stainless steel for which corrosion resistance is SUS303 equivalent (Cr19 - 21%, Mo1.5 - 2.5% stainless).
· Copper based metal is not used.
· HNBR has been utilized in the sealing rubber material in order to cope with low-concentration ozone.

CAD ：

2D / 3D

Quick-Connect Fitting, Union Tee, Screw Mount Branch

MISUMI

[Features]·The seal material is nitrile rubber.

• Volume Discount

CAD ：

2D / 3D

New Joint GWL □-□-2T Series

CKD

White body flame retardant type. Electroless nickel plating to the brass part

CAD ：

2D

For Clean Environment, Tube Fitting PP Type, Branch Y, Threaded Section SUS304

PISCO

PP resin is utilized for the main body material, which makes it ideal for clean environments.

[Features]
· The main body utilizes PP resin, which is suitable for clean environments.
· PP or SUS304 can be selected for the thread section.
· EPDM is utilized in the seal. Other selectable options include FKM and NBR.
· No oil specification.
· The plastic body is transparent to allow visual observation of the flowing liquid.
· Selectable from two packaging specifications: normal and cleanroom packaging to match the specific application.

CAD ：

2D / 3D

For General Piping, Tube Fitting, Branch Elbow

PISCO

A complete line of one-touch fittings.
[Features]
·Quick-connect fitting for general pneumatic piping.
·After installation, you can change the take-off angle of the resin body. (applicable to some products)
・ Allows centralized piping.
・ Light gray specifications and cleanroom packaging specifications are also available as options.
・ The cleanroom packaging specification uses fluorine-based grease.
· The product is washed with clean air and then packaged in a cleanroom (ISO class 6 equivalent).
[Applications]
·The standard specifications enable the use of water and are ideal for temperature control of molds and dies.
·After installation, you can change the take-off angle of the resin body.

CAD ：

2D / 3D

For General Piping, Tube Fitting, Wye Branch

PISCO

Quick connect fitting whose lock claw evenly grips the circumference of the tube.
[Features]
· Quick-connect fitting for general pneumatic piping.
· After installation, you can change the take-off angle of the resin main body. (applicable to some products)
· A wide lineup of products. Enables centralized piping.
· Light gray specifications and cleanroom packaging specifications are also available as options.
· The cleanroom packaging specification uses fluorine-based grease.
· The product is washed with clean air and then packaged in a cleanroom (ISO class 6 equivalent).
· Collet features good action to prevent sore fingertips even with frequent attachment and detachment.
· The electroless nickel provides high corrosion resistance, and the black resin body makes dirt hard to see.
[Applications]
· The standard specifications enable the use of water and are ideal for temperature control of molds and dies.

CAD ：

2D / 3D

For General Piping, Mini-Type Tube Fitting, Tee

PISCO

Volume successfully reduced by 40% from standard type.

CAD ：

2D / 3D

for Sputtering Resistance, Tube Fitting Brass Branch Tee, No Cover

PISCO

The main unit and release ring are made of brass for superior flame retardancy and spatter resistance.

for Corrosion Resistance, SUS304 Fitting, Tee

PISCO

If strength is required, optimal for chemical atmospheres.

CAD ：

2D / 3D

Touch Connector Five SUS Male Branch T

CHIYODA

A stainless steel one-touch fitting with improved strength and corrosion resistance. Male branch tees.

CAD ：

2D

Push One E Series Tee

NITTA

No jigs or tools are required for connecting tubes to this tee. The surface is resistant to degradation, preventing elution of copper ions.

CAD ：

2D

One-Touch Couplings for Clean Applications - Branch Y

MISUMI

[Features]·A quick-connect fitting suitable for clean environments. [Material]·It is polypropylene.

• Volume Discount

CAD ：

2D / 3D

One-Touch Couplings - 2-Port Swivel Elbows

MISUMI

[Features]·A quick-connect fitting, screw mount branch. [Material]·PBT (polybutylene terephthalate).

• Volume Discount

CAD ：

2D / 3D

One-Touch Couplings - R (PT) Double Y-Shaped

MISUMI

[Features]·A quick-connect fitting, screw mount branch. [Material]·PBT (polybutylene terephthalate).

• Volume Discount

CAD ：

2D / 3D

New Joint GWTR □-□ Series

CKD

White body flame retardant type. Electroless nickel plating to the brass part

CAD ：

2D

for Clean Environment, Tube Fitting PP Type, Tee

PISCO

PP resin is used for the main body material, making it ideal for clean environments.

CAD ：

2D / 3D

for Clean Environment, Tube Fitting PP Type Tee, Screw Element SUS304

PISCO

PP resin is used for the main body material, making it ideal for clean environments.

CAD ：

2D / 3D

Tube Fitting PP Type Branch Tee for Clean Environments

PISCO

PP resin is used for the main body material, making it ideal for clean environments.

[Features]
· The main body uses PP resin suitable for clean environments.
· EPDM is utilized in the seal.
· FKM and NBR types are available as optional extras.
· PP or SUS304 can be selected for the screw element.
· Use of oil permitted.
· Plastic body is clear colored to allow water flow to be observed.
· Two packaging specifications--normal packaging and clean room packaging--are available according to the desired application.

CAD ：

2D / 3D

Tube Fitting PP Type Branch Tee Thread Part SUS304 for Clean Environments

PISCO

[Features]
· The main body uses PP resin suitable for clean environments.
· EPDM is utilized in the seal.
· FKM and NBR types are available as optional extras.
· PP or SUS304 can be selected for the screw element.
· Use of oil permitted.
· Plastic body is clear colored to allow water flow to be observed.
· Two packaging specifications--normal packaging and clean room packaging--are available according to the desired application.

CAD ：

2D / 3D

Tube Fitting PP Type Branch Y for Clean Environments

PISCO

PP resin is used for the main body material, making it ideal for clean environments.

[Features]
· The main body uses PP resin suitable for clean environments.
· PP or SUS304 can be selected for the screw element.
· EPDM is utilized in the seal. Other options include FKM and NBR.
· Oil-free specifications.
· Plastic body is clear colored to allow water flow to be observed.
· Selectable from two packaging specifications--normal packaging and clean room packaging--depending on the specific application.

CAD ：

2D / 3D

Tube Fitting Chemical Type Tee

PISCO

PPS is used for the main body material, delivering excellent heat resistance, flame retardancy, and chemical resistance.

[Features]
· The main body uses PPS resin for superior heat resistance, flame retardancy (UL94V-0), and chemical resistance properties.
· FKM is utilized in the seal.
· EPDM and NBR types available as optional extras.
· None of the used parts should be exposed to grease.
· Also compliant to Food Sanitation Laws of Japan (FKM type only).
· No need to worry about rust or metal ions.
· Available in two packaging specifications--normal packaging and clean room packaging--to fit specific applications.

CAD ：

2D / 3D

For General Piping, Tube Fitting, Double Universal Elbow

PISCO

A complete line of one-touch fittings.
[Features]
·Quick-connect fitting for general pneumatic piping.
·After installation, you can change the take-off angle of the resin main body. (applicable to some products)
・ Allows centralized piping.
・ Light gray specifications and cleanroom packaging specifications are also available as options.
・ The cleanroom packaging specification uses fluorine-based grease.
· The product is washed with clean air and then packaged in a cleanroom (ISO class 6 equivalent).
[Applications]
·The standard specifications enable the use of water and are ideal for temperature control of molds and dies.
·After installation, you can change the take-off angle of the resin body.

CAD ：

2D / 3D

For General Piping, Tube Fitting, Triple Universal Elbow

PISCO

A complete line of quick connect fittings.
[Features]
· Quick-connect fitting for general pneumatic piping.
· After installation, you can change the take-off angle of the resin main body. (applicable to some products)
· Allows centralized piping.
· Light gray specifications and cleanroom packaging specifications are also available as options.
· The cleanroom packaging specification uses fluorine-based grease.
· The product is washed with clean air and then packaged in a cleanroom (ISO class 6 equivalent).
[Applications]
· The standard specifications enable the use of water and are ideal for temperature control of molds and dies.
· After installation, you can change the take-off angle of the resin body.

CAD ：

2D / 3D

General Plumbing Tube Fitting Tripod Elbow

PISCO

Tube fitting for various types of piping with a rich lineup.
[Features]
·Water can be used depending on the conditions.
·High performance and high quality. The lock claws evenly grip the circumference of the tube. Even after many years, tubes still attach and detach like new.
·Unique elastic sleeve design shuts out air leaks.
·Industry-leading range of variations. A wide assortment of sizes of reducings is available. 1 fitting can be used where conventionally 2 fittings were required.
·By reducing the number of fittings used, you can reduce costs and space. After installation, you can change the take-off angle of the resin body.
[Applications]
·Pipe that branches in 2 directions at 90 degrees to the female thread side.

CAD ：

2D / 3D

For General Piping, Tube Fitting, Branch A

PISCO

A wide variety of quick-connect fittings for general piping.

[Features]
·Quick-connect fitting for general pneumatic piping.
·After installation, you can change the take-off angle of the resin body. (applicable to some products)
·A wide lineup of products.
·Enables centralized piping

CAD ：

2D / 3D

Tube Fitting Branch Double Branch Triple Double for General Piping

PISCO

[Features]
· One-touch fitting for general pneumatic pipes.
· Rich lineup.
· The take-off angle of the resin body can be changed after mounting.
· Centralized piping is supported.
· Light gray and clean room packaged types are available as options.
· Clean room packaging specification uses fluorinated grease.
· After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.

CAD ：

2D / 3D

Tube Fitting Branch Double Y for General Piping

PISCO

Several types of one touch fittings for general piping are available.

[Features]
· One-touch fitting for general pneumatic pipes.
· Rich lineup.
· Can change the take-off angle of the resin body after mounting.
· Centralized piping is supported.
· Light gray types, and clean room packaged types are available as options.
· Clean room packaging specification uses fluorinated grease.
· After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.

CAD ：

2D / 3D

For General Piping, Mini-Type Tube Fitting, Branch Tee

PISCO

Volume successfully reduced by 40% versus the standard type.

CAD ：

2D / 3D

Anti-Static Tube-Fitting EG Tee

PISCO

Optimal for lines requiring static electricity dissipation and anti-static performance.

CAD ：

2D

Tube Fitting Spatter-Resistant Tee

PISCO

Uses a flame retardant resin. Superior spatter (spark) proofing. (equivalent to V-0)

CAD ：

2D / 3D