Dowel Pins, Spring Pins, Stepped Pins（Sales Unit：Low Quantity (Available beginning with 1 pc.) Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Type Spring Pin for General Use【1-2,000 Pieces Per Package】

  TAIYO STAINLESS SPRING

  Higher dynamic load and shock impact capacity compared to wave spring pin.

  • Volume Discount

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1.2 ～ 6	Positive Tolerance	4 ～ 63	Spring Pins	Standard	1.4 ～ 6.4	Stainless Steel ～ Steel	Regular	1.3 ～ 6.2	Tempered Collar / Glossy Finishing	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 0.01
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin, Former JIS M6

  HIMENO PRECISION

  Parallel pin of the old JIS m6 (plus tolerance). Has a round tip and a flat tip.

  • Volume Discount

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  6 ～ 8	Positive Tolerance	15 ～ 30	Straight / Dual-Fit Dowel	Standard	-	Steel	-	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 27.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  S45C-Q Taper Pin With Internal Thread

  HIMENO PRECISION

  [Features]Hardening taper pin with positive tolerance internal thread. [Materials]S45C

  • Volume Discount

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 16	Positive Tolerance	15 ～ 140	Tapered	Tapped	-	Steel	-	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 145.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Dowel Pin With Inside Threads, A Type (With Spiral Grooved)

  OHKITA

  Dowel pin with internal thread that has a spiral air release groove.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  6 ～ 20	Positive Tolerance	15 ～ 120	Straight / Dual-Fit Dowel	Tapped	-	Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 100.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooved Pin A Type

  SUNCO

  [Features]There is a groove gradually spread. [Material] Steel

  CAD ：

  2D / 3D

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  4 ～ 6	Positive Tolerance	16 ～ 20	Spring Pins	Standard	4.35 ～ 6.35	Steel	Regular	-	Black Oxide	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 40.13
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin, Type A, M6

  OHKITA

  A pin with a positive tolerance.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1.6 ～ 30	Positive Tolerance	4 ～ 180	Straight / Dual-Fit Dowel	Standard	-	Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 11.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S45C Taper Pin

  OHKITA

  [Features]Positive tolerance taper pin with 1/50 taper used for positioning, etc.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 20	Positive Tolerance	20 ～ 200	Tapered	Standard	-	Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 28.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pin With Internal Thread (Hardened)

  SUNCO

  [Shape] Taper
  [Material] S45C
  [Shaft diameter tolerance] Plus tolerance
  [Shaft end shape] Internal thread
  [Characteristics] General
  [Surface treatment] None / chromate plating / other treatments available.
  [Hardening] Yes
  [Nominal diameter] 5/6/8/10/12/13/16/20
  [Length] 15 to 160

  • Volume Discount

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 20	Positive Tolerance	20 ～ 160	Tapered	Tapped	-	Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 185.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin With Internal Thread m6

  OHKITA

  Internal threading makes insertion easy.
  The tolerance is m6.
  Material = S45C equivalent; hardness = HRC45 to 52; quenched and tempered.
  Material = SUS303 Equivalent. Use for applications where corrosion resistance is required.
  

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 25	-	10 ～ 140	Straight / Dual-Fit Dowel	Tapped	-	Stainless Steel ～ Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 324.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel Parallel Pin With Internal Thread m6

  HIMENO PRECISION

  [Features]·Stainless steel parallel pin with positive tolerance internal thread (A type m6).

  • Volume Discount

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 13	Positive Tolerance	15 ～ 80	Straight / Dual-Fit Dowel	Tapped	-	Stainless Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 137.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin, Class B, h7

  OHKITA

  Pin with a negative tolerance.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 30	Negative Tolerance	4 ～ 200	Straight / Dual-Fit Dowel	Standard	-	Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 11.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin With Internal Thread h7 (Hardened)

  SUNCO

  [Shape] Straight
  [Material] S45C
  [Shaft diameter tolerance] Minus tolerance
  [Shaft end shape] Internal thread
  [Characteristics] General
  [Surface treatment] None
  [Hardening] Yes
  [Nominal diameter] 5/6/8/10/12/13/16/20
  [Length] 10 to 120

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 20	Negative Tolerance	10 ～ 60	Straight / Dual-Fit Dowel	Tapped	-	Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 135.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Knock Pin B Type

  OHKITA

  This simple dowel pin does not require fitting hole accuracy.
  Connects using the protrusions molded on both side of the groove.
  The fitting hole recommended tolerance for a nominal diameter of up to 3 mm is H9, and H11 for anything larger.
  Material = free-cutting steel; surface processing = nominal diameter less than 4 mm: unprocessed, 4 mm or more: black oxide finish.
  

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1.5 ～ 10	-	6 ～ 70	-	Standard	1.63 ～ 10.45	Steel	Regular	-	-	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 48.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dowel Pin With Internal Thread MDP

  HIMENO PRECISION

  [Features]Easy to insert via internal thread. [Shape]Straight / Stepped Parallel; Material: SUJ2

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  6 ～ 20	Positive Tolerance	15 ～ 100	Straight / Dual-Fit Dowel	Tapped	-	Steel	-	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 80.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin With Internal Thread h7

  OHKITA

  Internal threading makes insertion easy.
  The tolerance is h7.
  Material = S45C equivalent; hardness = HRC45 to 52; quenched and tempered.
  Material = SUS303 Equivalent. Use for applications where corrosion resistance is required.
  

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 20	-	10 ～ 120	Straight / Dual-Fit Dowel	Tapped	-	Stainless Steel ～ Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 324.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S45C-Q (Quenched) Parallel Pin A Type

  HIMENO PRECISION

  [Features]Hardening parallel pin with positive tolerance. [Shape]Straight/Parallel Joggling

  • Volume Discount

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  3 ～ 25	Positive Tolerance	6 ～ 150	Straight / Dual-Fit Dowel	Standard	-	Steel	-	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 19.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dowel Pin With Inside Threads, C Type (With Spiral Grooved)

  OHKITA

  Dowel pin with internal thread that has a spiral air release groove.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  6 ～ 20	Negative Tolerance	20 ～ 100	Straight / Dual-Fit Dowel	Tapped	-	Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 96.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooved Pin E Type

  SUNCO

  [Features]There are 3 grooves around center. [Material] Steel

  CAD ：

  2D / 3D

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 6	Positive Tolerance	26 ～ 36	Spring Pins	Standard	5.2 ～ 6.25	Steel	Regular	-	Black Oxide	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 56.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SUS303 Parallel Pin, B Type h7

  SUNCO

  Parallel pins, also called "knock pins".
  [Features]
  ·When two or more parts are fastened together, they are drilled and hammered together while they are still in place.
  ·Used for precision machining and heavy-duty machines.
  ·Material: SUS303.
  [Applications]
  ·Not limited to positioning applications, it is widely used as a machine part.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1.6 ～ 16	Negative Tolerance	4 ～ 60	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 27.71
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Knock Pin A Type

  OHKITA

  This simple dowel pin does not require fitting hole accuracy.
  Connects using the protrusions molded on both side of the groove.
  The fitting hole recommended tolerance for a nominal diameter of up to 3 mm is H9, and H11 for anything larger.
  Material = free-cutting steel; surface processing = nominal diameter less than 4 mm: unprocessed, 4 mm or more: black oxide finish.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1.5 ～ 10	-	4 ～ 60	-	Standard	1.6 ～ 10.45	Steel	Regular	-	-	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 48.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Knock Pin D Type

  OHKITA

  This simple dowel pin does not require fitting hole accuracy.
  Connects using the protrusions molded on both side of the groove.
  The fitting hole recommended tolerance for a nominal diameter of up to 3 mm is H9, and H11 for anything larger.
  Material = free-cutting steel; surface processing = nominal diameter less than 4 mm: unprocessed, 4 mm or more: black oxide finish.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1.5 ～ 8	-	6 ～ 80	-	Standard	1.6 ～ 8.4	Steel	Regular	-	-	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 48.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dowel Pin With Internal Thread TMMDP

  HIMENO PRECISION

  A dowel pin with an inner screw that complies with the Himeno standards (TMMDP).

  • Volume Discount

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 20	Positive Tolerance	10 ～ 80	Straight / Dual-Fit Dowel	Tapped	-	Steel	-	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 79.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dowel Pin With Internal Thread TMDP

  HIMENO PRECISION

  [Features]Dowel pin with internal thread. [Shape]Straight / Stepped,Parallel; Material: Steel

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 20	Positive Tolerance	10 ～ 80	Straight / Dual-Fit Dowel	Tapped	-	Steel	-	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 80.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooved Pin Type B

  SUNCO

  [Features]There is a groove gradually spread from center toward flange.

  CAD ：

  2D / 3D

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  3 ～ 10	Positive Tolerance	6 ～ 30	Spring Pins	Standard	3.2 ～ 10.4	Steel	Regular	-	Black Oxide	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 37.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel Parallel Pin (Soft)

  TAIYO STAINLESS SPRING

  Outer diameter dimensions are less accurate than those of the A type. Used for rotating shafts, hinges, etc.
  After cutting, the product undergoes centerless grinding and finishing to ensure straightness, roundness, and outer diameter dimensions.
  Made of stainless steel, it is suitable for home appliance, medical, and food-related applications.
  

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1.2 ～ 5	Positive Tolerance	4 ～ 30	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	Regular	-	Not Provided / Glossy Finishing	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 13.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pin (steel/stainless steel)

  SUNCO

  [Shape] Taper
  [Shaft diameter tolerance] Plus tolerance
  [Shaft end shape] Standard
  [Characteristics] General
  [Nominal size] 1/1.2/1.5/1.6/2/2.5/3/4/5/6/7/8/10/12/13/16/20
  [Material] Steel / stainless steel
  [Surface treatment] None
  [Hardening] None

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  2 ～ 20	Positive Tolerance	12 ～ 200	Tapered	Standard	-	Stainless Steel ～ Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 33.98
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  (Hardened) Tapered Pin

  OHKITA

  [Features]·Hardening positive tolerance pin. ·Pin with 1/50 taper used for positioning, etc.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  4 ～ 13	Positive Tolerance	30 ～ 130	Tapered	Standard	-	Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 49.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapered Pin With Inner Screw

  OHKITA

  [Features]Easy to insert via internal thread. [Shape]Can choose from taper; material: S45C and SUS303.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 16	Positive Tolerance	20 ～ 90	Tapered	Tapped	-	Stainless Steel ～ Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 91.42
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  (Hardened) Parallel Pin, Type A

  TAIYO STAINLESS SPRING

  [Features]Hardening A type parallel pin with high external dimensions accuracy used for rotary shafts, hinges, etc.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  4 ～ 6	Positive Tolerance	8 ～ 50	Straight / Dual-Fit Dowel	Standard	-	Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 26.62
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin, Class A, m6 SUS316

  OHKITA

  A dowel pin made of SUS316.
  Resistance to pitting and gap corrosion has been improved through the use of SUS303.
  Features outstanding corrosion resistance to media such as sea water or salt water.
  The shape of the end surfaces varies on each side, but insertion should generally be from the flat tip.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  2 ～ 6	Positive Tolerance	4 ～ 30	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 144.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Knock Pin E Type

  OHKITA

  This simple dowel pin does not require fitting hole accuracy.
  Connects using the protrusions molded on both side of the groove.
  The fitting hole recommended tolerance for a nominal diameter of up to 3 mm is H9, and H11 for anything larger.
  Material = free-cutting steel; surface processing = nominal diameter less than 4 mm: unprocessed, 4 mm or more: black oxide finish.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1.5 ～ 8	-	8 ～ 60	-	Standard	1.6 ～ 8.35	Steel	Regular	-	-	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 48.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin, Former JIS H7

  HIMENO PRECISION

  Pin with a negative tolerance that complies with the former JIS.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  4	Negative Tolerance	8 ～ 10	Straight / Dual-Fit Dowel	Standard	-	Steel	-	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 18.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S45C-Q Taper Pin With External Thread

  HIMENO PRECISION

  [Features]Taper pin with positive tolerance external thread. [Materials]S45C

  • Volume Discount

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 16	Positive Tolerance	20 ～ 140	Tapered	External Thread	-	Steel	-	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 142.40
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooved Pin, D Type

  SUNCO

  [Features]There are 3 grooves around flange. [Shape]Spring pin; Material: Steel

  CAD ：

  2D / 3D

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  2 ～ 6	Positive Tolerance	8 ～ 30	Spring Pins	Standard	2.1 ～ 6.3	Steel	Regular	-	Black Oxide	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 35.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooved Pin F Type

  SUNCO

  [Features]Simple dowel pin commonly used in Europe and the United States.

  CAD ：

  2D / 3D

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  6	Positive Tolerance	20	Spring Pins	Standard	6.3	Steel	Regular	-	Black Oxide	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 75.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel Parallel Pin (Hard)

  TAIYO STAINLESS SPRING

  Outer diameter dimensions are more accurate than those of the B type. Used for rotating shafts, hinges, etc.
  
  After cutting, the product undergoes centerless grinding and finishing to ensure straightness, roundness, and outer diameter dimensions.
  Made of stainless steel, it is suitable for home appliance, medical, and food-related applications.
  

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1.6 ～ 3	Negative Tolerance	5 ～ 35	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	Regular	-	Not Provided / Glossy Finishing	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 14.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  (Tempered) A-Type Parallel Pin m6

  SUNCO

  Parallel pins, also called "knock pins".
  [Features]
  ·When two or more parts are fastened together, they are drilled and hammered together while they are still in place.
  ·Used for precision machining and heavy-duty machines.
  [Applications]
  ·Not limited to positioning applications, it is widely used as a machine part.

  • Volume Discount

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  3 ～ 30	Positive Tolerance	6 ～ 80	Straight / Dual-Fit Dowel	Standard	-	Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 22.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dowel Pin Inch Size

  SUNCO

  [Shape] Straight
  [Material] Steel
  [Shaft diameter tolerance] Plus tolerance
  [Shaft end shape] Standard
  [Characteristics] Standard
  [Surface treatment] None
  [Hardening] None
  [Nominal diameter] 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2
  [Length] 3/8 to 3

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1/2 ～ 3/16	Positive Tolerance	-	Straight / Dual-Fit Dowel	Standard	-	Steel	Regular	-	Black Oxide	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 31.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin, B-Type h7 (Hardened)

  SUNCO

  [Shape] Straight
  [Material] S45C
  [Shaft diameter tolerance] Minus tolerance
  [Shaft end shape] Standard
  [Characteristics] General
  [Surface treatment] None
  [Hardening] Yes
  [Nominal diameter] 3/4/5/6/8/10/12/13/16/20
  [Length] 6 to 100

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  4 ～ 8	Negative Tolerance	12 ～ 32	Straight / Dual-Fit Dowel	Standard	-	Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 25.67
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spring Pin (Stainless Steel Waveform / For Light Loads) Solar Stainless Steel Spring

  SUNCO

  Spring pins used for purposes such as connecting, positioning, and preventing screws from rotating.
  [Features]
  ·Generic name for several types of pins to drive.
  ·A rod-shaped or roll-shaped product consisting of two or more parts is inserted into a precise hole.
  ·Spring force in the radial direction is used by forming a gap at the seam of a springy plate by rounding it.
  ·It is possible to have multiple roles such as stopper and hinge.
  ·When a dynamic load is applied, it is recommended to use the specified insertion direction.
  [Applications]
  ·Compared to general use, the thickness of the plate is thin and the mating material is aluminum or resin, making it suitable for places where the insertion load is kept low.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 6	-	4 ～ 63	-	-	-	Stainless Steel	-	-	-	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 6.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin (A-Type, Made By Ohkita)

  SUNCO

  It is widely used not only for positioning purposes but also as machine parts. It has excellent corrosion resistance to various media including seawater and salt water, and is used for seawater pumps, piping parts, valves, food machinery, etc.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  4	Positive Tolerance	10	Straight / Dual-Fit Dowel	Standard	2.012	Stainless Steel	Regular	2.004	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 66.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin, Class A, m6 SUS303

  OHKITA

  A dowel pin made of SUS303.
  Use for applications that require corrosion resistance.
  The shape of the end surfaces varies on each side, but insertion should generally be from the flat tip.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 20	Positive Tolerance	4 ～ 120	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 51.99
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Parallel Pin [m6] S45C

  OHKITA

  Pin is 300 mm or longer. Cut for use.
  Polishing completed for m6 tolerance.
  Material = S45C Equivalent (No Heat Treatment)

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  3 ～ 25	-	300 ～ 350	Straight / Dual-Fit Dowel	-	-	Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 460.51
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Parallel Pin [m6] SUS303

  OHKITA

  Pin is 300 mm or longer. Cut for use.
  Features outstanding corrosion resistance and machining resistance.
  Polishing completed for m6 tolerance.
  Material = SUS303 Equivalent

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  3 ～ 20	-	300 ～ 350	Straight / Dual-Fit Dowel	-	-	Stainless Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 1,049.85
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pin SUS303

  OHKITA

  Positioning pin with a 1/50 taper.
  Use for applications that require corrosion resistance.
  Material = SUS303 Equivalent

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 20	Positive Tolerance	6 ～ 200	Tapered	Standard	-	Stainless Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 116.01
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Nominal Dia.
Shaft Dia. Tolerance
Length
Shape
End Shape
Outer Dia. (Max.)(mm)
Material
Properties
Outer Dia. (Min.)(mm)
Surface Treatment
Sales Unit

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	TAIYO STAINLESS SPRING	HIMENO PRECISION	HIMENO PRECISION	OHKITA	SUNCO	OHKITA	OHKITA	SUNCO	OHKITA	HIMENO PRECISION	OHKITA	SUNCO	OHKITA	HIMENO PRECISION	OHKITA	HIMENO PRECISION	OHKITA	SUNCO	SUNCO	OHKITA	OHKITA	HIMENO PRECISION	HIMENO PRECISION	SUNCO	TAIYO STAINLESS SPRING	SUNCO	OHKITA	OHKITA	TAIYO STAINLESS SPRING	OHKITA	OHKITA	HIMENO PRECISION	HIMENO PRECISION	SUNCO	SUNCO	TAIYO STAINLESS SPRING	SUNCO	SUNCO	SUNCO	SUNCO	SUNCO	OHKITA	OHKITA	OHKITA	OHKITA
Product Series	Straight Type Spring Pin for General Use【1-2,000 Pieces Per Package】	Parallel Pin, Former JIS M6	S45C-Q Taper Pin With Internal Thread	Dowel Pin With Inside Threads, A Type (With Spiral Grooved)	Grooved Pin A Type	Parallel Pin, Type A, M6	S45C Taper Pin	Taper Pin With Internal Thread (Hardened)	Parallel Pin With Internal Thread m6	Stainless Steel Parallel Pin With Internal Thread m6	Parallel Pin, Class B, h7	Parallel Pin With Internal Thread h7 (Hardened)	Knock Pin B Type	Dowel Pin With Internal Thread MDP	Parallel Pin With Internal Thread h7	S45C-Q (Quenched) Parallel Pin A Type	Dowel Pin With Inside Threads, C Type (With Spiral Grooved)	Grooved Pin E Type	SUS303 Parallel Pin, B Type h7	Knock Pin A Type	Knock Pin D Type	Dowel Pin With Internal Thread TMMDP	Dowel Pin With Internal Thread TMDP	Grooved Pin Type B	Stainless Steel Parallel Pin (Soft)	Taper Pin (steel/stainless steel)	(Hardened) Tapered Pin	Tapered Pin With Inner Screw	(Hardened) Parallel Pin, Type A	Parallel Pin, Class A, m6 SUS316	Knock Pin E Type	Parallel Pin, Former JIS H7	S45C-Q Taper Pin With External Thread	Grooved Pin, D Type	Grooved Pin F Type	Stainless Steel Parallel Pin (Hard)	(Tempered) A-Type Parallel Pin m6	Dowel Pin Inch Size	Parallel Pin, B-Type h7 (Hardened)	Spring Pin (Stainless Steel Waveform / For Light Loads) Solar Stainless Steel Spring	Parallel Pin (A-Type, Made By Ohkita)	Parallel Pin, Class A, m6 SUS303	Long Parallel Pin [m6] S45C	Long Parallel Pin [m6] SUS303	Taper Pin SUS303
CAD					2D / 3D													2D / 3D						2D / 3D										2D / 3D	2D / 3D
From	₹ 2.00	₹ 27.05	₹ 145.15	₹ 100.22	₹ 40.13	₹ 11.91	₹ 28.31	₹ 185.60	₹ 324.00	₹ 137.60	₹ 11.78	₹ 135.20	₹ 48.00	₹ 80.00	₹ 324.00	₹ 19.00	₹ 96.96	₹ 56.91	₹ 27.71	₹ 48.00	₹ 48.00	₹ 79.00	₹ 80.80	₹ 37.82	₹ 13.15	₹ 33.98	₹ 49.02	₹ 91.42	₹ 26.62	₹ 144.00	₹ 48.00	₹ 18.00	₹ 142.40	₹ 35.85	₹ 75.65	₹ 14.38	₹ 22.44	₹ 31.87	₹ 25.67	₹ 6.00	₹ 66.80	₹ 51.99	₹ 460.51	₹ 1,049.85	₹ 116.01
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more
Nominal Dia.	1.2 ～ 6	6 ～ 8	5 ～ 16	6 ～ 20	4 ～ 6	1.6 ～ 30	1 ～ 20	5 ～ 20	5 ～ 25	5 ～ 13	1 ～ 30	5 ～ 20	1.5 ～ 10	6 ～ 20	5 ～ 20	3 ～ 25	6 ～ 20	5 ～ 6	1.6 ～ 16	1.5 ～ 10	1.5 ～ 8	5 ～ 20	5 ～ 20	3 ～ 10	1.2 ～ 5	2 ～ 20	4 ～ 13	5 ～ 16	4 ～ 6	2 ～ 6	1.5 ～ 8	4	5 ～ 16	2 ～ 6	6	1.6 ～ 3	3 ～ 30	1/2 ～ 3/16	4 ～ 8	1 ～ 6	4	1 ～ 20	3 ～ 25	3 ～ 20	1 ～ 20
Shaft Dia. Tolerance	Positive Tolerance	Positive Tolerance	Positive Tolerance	Positive Tolerance	Positive Tolerance	Positive Tolerance	Positive Tolerance	Positive Tolerance	-	Positive Tolerance	Negative Tolerance	Negative Tolerance	-	Positive Tolerance	-	Positive Tolerance	Negative Tolerance	Positive Tolerance	Negative Tolerance	-	-	Positive Tolerance	Positive Tolerance	Positive Tolerance	Positive Tolerance	Positive Tolerance	Positive Tolerance	Positive Tolerance	Positive Tolerance	Positive Tolerance	-	Negative Tolerance	Positive Tolerance	Positive Tolerance	Positive Tolerance	Negative Tolerance	Positive Tolerance	Positive Tolerance	Negative Tolerance	-	Positive Tolerance	Positive Tolerance	-	-	Positive Tolerance
Length	4 ～ 63	15 ～ 30	15 ～ 140	15 ～ 120	16 ～ 20	4 ～ 180	20 ～ 200	20 ～ 160	10 ～ 140	15 ～ 80	4 ～ 200	10 ～ 60	6 ～ 70	15 ～ 100	10 ～ 120	6 ～ 150	20 ～ 100	26 ～ 36	4 ～ 60	4 ～ 60	6 ～ 80	10 ～ 80	10 ～ 80	6 ～ 30	4 ～ 30	12 ～ 200	30 ～ 130	20 ～ 90	8 ～ 50	4 ～ 30	8 ～ 60	8 ～ 10	20 ～ 140	8 ～ 30	20	5 ～ 35	6 ～ 80	-	12 ～ 32	4 ～ 63	10	4 ～ 120	300 ～ 350	300 ～ 350	6 ～ 200
Shape	Spring Pins	Straight / Dual-Fit Dowel	Tapered	Straight / Dual-Fit Dowel	Spring Pins	Straight / Dual-Fit Dowel	Tapered	Tapered	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	-	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Spring Pins	Straight / Dual-Fit Dowel	-	-	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Spring Pins	Straight / Dual-Fit Dowel	Tapered	Tapered	Tapered	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	-	Straight / Dual-Fit Dowel	Tapered	Spring Pins	Spring Pins	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	-	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Tapered
End Shape	Standard	Standard	Tapped	Tapped	Standard	Standard	Standard	Tapped	Tapped	Tapped	Standard	Tapped	Standard	Tapped	Tapped	Standard	Tapped	Standard	Standard	Standard	Standard	Tapped	Tapped	Standard	Standard	Standard	Standard	Tapped	Standard	Standard	Standard	Standard	External Thread	Standard	Standard	Standard	Standard	Standard	Standard	-	Standard	Standard	-	-	Standard
Outer Dia. (Max.)(mm)	1.4 ～ 6.4	-	-	-	4.35 ～ 6.35	-	-	-	-	-	-	-	1.63 ～ 10.45	-	-	-	-	5.2 ～ 6.25	-	1.6 ～ 10.45	1.6 ～ 8.4	-	-	3.2 ～ 10.4	-	-	-	-	-	-	1.6 ～ 8.35	-	-	2.1 ～ 6.3	6.3	-	-	-	-	-	2.012	-	-	-	-
Material	Stainless Steel ～ Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Stainless Steel ～ Steel	Stainless Steel	Steel	Steel	Steel	Steel	Stainless Steel ～ Steel	Steel	Steel	Steel	Stainless Steel	Steel	Steel	Steel	Steel	Steel	Stainless Steel	Stainless Steel ～ Steel	Steel	Stainless Steel ～ Steel	Steel	Stainless Steel	Steel	Steel	Steel	Steel	Steel	Stainless Steel	Steel	Steel	Steel	Stainless Steel	Stainless Steel	Stainless Steel	Steel	Stainless Steel	Stainless Steel
Properties	Regular	-	-	Regular	Regular	Regular	Regular	Regular	Regular	Regular	Regular	Regular	Regular	-	Regular	-	Regular	Regular	Regular	Regular	Regular	-	-	Regular	Regular	Regular	Regular	Regular	Regular	Regular	Regular	-	-	Regular	Regular	Regular	Regular	Regular	Regular	-	Regular	Regular	Regular	Regular	Regular
Outer Dia. (Min.)(mm)	1.3 ～ 6.2	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	2.004	-	-	-	-
Surface Treatment	Tempered Collar / Glossy Finishing	Not Provided	Not Provided	Not Provided	Black Oxide	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	Not Provided	Not Provided	Not Provided	Not Provided	Black Oxide	Not Provided	-	-	Not Provided	Not Provided	Black Oxide	Not Provided / Glossy Finishing	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	Not Provided	Not Provided	Black Oxide	Black Oxide	Not Provided / Glossy Finishing	Not Provided	Black Oxide	Not Provided	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided
Sales Unit	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)

Loading...