Dowel Pins, Spring Pins, Stepped Pins（Material：Stainless Steel）

• You can add up to 6 items per a category to the compare list. Compare

  

  Dowel, Positive Tolerance, End Shape: One Side Tapered, One Side Spherical, Fit Tolerance: +0.01/+0.005

  MISUMI

  Positive Tolerance Type Dowel Pins.

  • Volume Discount

  CAD ：

  2D / 3D

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 12	Positive Tolerance	5 ～ 60	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	-	-	-	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 16.14
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spring Pins

  MISUMI

  [Features]This grippy pin can be used for simple fastening and positioning.

  • Volume Discount

  CAD ：

  2D / 3D

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  2 ～ 6	Positive Tolerance	5 ～ 56	Spring Pins	Standard	2.25 ～ 6.4	Stainless Steel	Regular	2.15 ～ 6.2	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 6.00
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dowel (MSTP/MSTPC/MSTPCS) -Plus Tolerance- [Listed in Mechanical Parts Catalog]

  MISUMI

  Positive Tolerance Type Dowel Pins.

  • Volume Discount

  CAD ：

  2D / 3D

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 13	Positive Tolerance	10 ～ 60	Straight / Dual-Fit Dowel	Tapped	-	Stainless Steel	-	-	-	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 59.79
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dowel, Negative Tolerance, End Shape: One Side Tapered, One Side Spherical, Fit Tolerance: h7

  MISUMI

  [Features]A dowel with minus tolerance. [Shape]Straight / stepped parallel; Material: Available in SUS304 or SUS440C / 13Cr stainless steel.

  • Volume Discount

  CAD ：

  2D / 3D

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 10	Negative Tolerance	5 ～ 60	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	-	-	-	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 13.00
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dowel (MST/MSTM/MSTMS) -Plus Tolerance- [Listed in Mechanical Parts Catalog]

  MISUMI

  Positive Tolerance Type Dowel Pins.

  • Volume Discount

  CAD ：

  2D / 3D

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 10	Positive Tolerance	10 ～ 40	Straight / Dual-Fit Dowel	Tapped	-	Stainless Steel	-	-	-	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 207.80
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dowel Pin -Minus Tolerance- [Published in mechanical parts catalog]

  MISUMI

  *This product is available as mechanical parts and parts for press molds.
   This page is based on the content listed in the mechanical parts catalog.

  • Volume Discount

  CAD ：

  2D / 3D

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 10	Negative Tolerance	10 ～ 45	Straight / Dual-Fit Dowel	Tapped	-	Stainless Steel	-	-	-	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 207.80
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Parallel Pin B Type【1-50 Pieces Per Package】

  HIMENO PRECISION

  An h7 (minus) tolerance dowel pin. Metric diameters up to 25 mm and lengths up to 150 mm are available on the web.

  • Volume Discount

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 16	Negative Tolerance	4 ～ 100	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	-	-	Not Provided	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.

  From: ₹ 21.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Parallel Pin A Type

  HIMENO PRECISION

  M6 (positive tolerance) parallel pins. On Web, items whose M diameter and length are up to 16 and 100mm, respectively, are available.

  • Volume Discount

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 16	Positive Tolerance	4 ～ 100	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	-	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 19.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pin With External Thread【1-100 Pieces Per Package】

  OHKITA

  Insertion and maintenance are simple, since outer screws are included.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 12	Positive Tolerance	35 ～ 100	Tapered	External Thread	-	Stainless Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.

  From: ₹ 182.40
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Stepped Dowel Pins - Standard with Tapped Hole

  MISUMI

  Dual-Fit Dowel Pins with different dimension tolerances provided for both ends.

  • Volume Discount

  CAD ：

  2D / 3D

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 13	Positive Tolerance	15 ～ 70	Stepped	Standard / Tapped	-	Stainless Steel	-	-	-	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 457.16
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dual Fit Dowel Pins - p6-h7 p6-g6

  MISUMI

  [Features]A stepped parallel pin with different diameter tolerances on both ends. [Shape]Straight / stepped parallel; Material: SUJ2 and SUS440C.

  • Volume Discount

  CAD ：

  2D / 3D

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  3 ～ 12	Negative Tolerance	8 ～ 40	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	-	-	-	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 332.48
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Straight Type Spring Pin for General Use【1-5,000 Pieces Per Package】

  TAIYO STAINLESS SPRING

  Higher dynamic load and shock impact capacity compared to wave spring pin.

  • Volume Discount

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 10	Positive Tolerance	4 ～ 56	Spring Pins	Standard	1.2 ～ 10.6	Stainless Steel	Regular	1.1 ～ 10.3	Glossy Finishing	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.

  From: ₹ 0.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dowel, Positive Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: p6

  MISUMI

  [Features]A dowel with over tolerance. [Shape]Straight / stepped parallel; Material: SUJ2 and SUS440C.

  • Volume Discount

  CAD ：

  2D / 3D

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  6 ～ 12	Positive Tolerance	15 ～ 45	Straight / Dual-Fit Dowel	Tapped	-	Stainless Steel	-	-	-	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 332.48
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dowel, Negative Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: h7

  MISUMI

  [Features]A dowel with minus tolerance. [Shape]Straight / stepped parallel; Material: SUS440C

  • Volume Discount

  CAD ：

  2D / 3D

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 12	Negative Tolerance	10 ～ 50	Straight / Dual-Fit Dowel	Tapped	-	Stainless Steel	-	-	-	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 161.05
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Spring Pin (for General Purposes)【1-1,000 Pieces Per Package】

  OCHIAI

  [Features]
  · Cylindrically coiled thin plate with a slit. When inserted (by press fit) into a hole with a diameter slightly smaller than that of its outer diameter, the pin applies internal pressure to the hole (force due to its expansion), preventing it from dropping out from the hole.
  · This hollow pin contributes to weight reduction when compared with solid pins.
  · Used for positioning, turn prevention, and retention, etc.
  · Used for simple fastening and positioning, etc.
  · Its grip prevents it from dropping out from its mating hole.
  · When it is necessary to increase the shear load, use a double-pin structure. (The load is made by adding the shear load on the outer and inner pins.)

  • Volume Discount

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 6	Positive Tolerance	4 ～ 63	Spring Pins	Standard	1.2 ～ 6.4	Stainless Steel	Regular	1.1 ～ 6.2	Not Provided	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.

  From: ₹ 1.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dowel, Negative Tolerance, End Shape: Chamfer Edge on Both Sides, Fit Tolerance: h7

  MISUMI

  [Features]A dowel with minus tolerance. [Shape]Straight / stepped parallel; Material: SUS304 and SUS440C.

  • Volume Discount

  CAD ：

  2D / 3D

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  2 ～ 8	Negative Tolerance	6 ～ 20	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	-	-	-	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 57.00
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Taper Pin【1-25 Pieces Per Package】

  HIMENO PRECISION

  A headless pin with a circular cross section and a side taper of 1/50.

  • Volume Discount

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 20	Positive Tolerance	6 ～ 160	Tapered	Standard	-	Stainless Steel	-	-	Not Provided	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.

  From: ₹ 46.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin, Class A, m6 SUS303

  OHKITA

  A dowel pin made of SUS303.
  Use for applications that require corrosion resistance.
  The shape of the end surfaces varies on each side, but insertion should generally be from the flat tip.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 20	Positive Tolerance	4 ～ 120	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 51.99
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dowel, Positive Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: +0.002/0

  MISUMI

  Positive Tolerance Type Dowel Pins.

  • Volume Discount

  CAD ：

  2D / 3D

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 10	Positive Tolerance	5 ～ 60	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	-	-	-	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 135.07
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spring Pin, Wave Type, for General Use【1-5,000 Pieces Per Package】

  TAIYO STAINLESS SPRING

  It has less product entanglement compared to the straight type, and is suitable for automatic insertion.
  In addition, it has long extended dimensions, with superior circularity and drawing load capacities.

  • Volume Discount

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 10	Positive Tolerance	4 ～ 100	Spring Pins	Standard	1.2 ～ 10.6	Stainless Steel	Regular	1.1 ～ 10.3	Glossy Finishing	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.

  From: ₹ 0.92
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Super Shaft　H7【5-30 Pieces Per Package】

  KS SANGYO

  Parallel pin of the former JIS h7 (negative tolerance).

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  0.1 ～ 6	Negative Tolerance	2 ～ 65	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	-	-	-	Box, Pkg.

  From: ₹ 39.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dual Fit Dowel Pins - Hollow, Tapped

  MISUMI

  [Features]A stepped parallel pin with different diameter tolerances on both ends. [Shape]Straight / stepped parallel; Material: SUJ2 and SUS440C.

  • Volume Discount

  CAD ：

  2D / 3D

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  6 ～ 12	Negative Tolerance	12 ～ 40	Straight / Dual-Fit Dowel	Tapped	-	Stainless Steel	-	-	-	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 602.62
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  General-Purpose Pin, End Shape: One Side Tapered, One Side Spherical, Fit Tolerance: g6

  MISUMI

  [Features]A general-purpose pin with an outer diameter tolerance of g6. [Shape]Straight / stepped parallel; Material: SUJ2/SUS304/SUS440C.

  • Volume Discount

  CAD ：

  2D / 3D

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  2 ～ 8	Negative Tolerance	6 ～ 20	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	-	-	-	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 176.63
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Wave Type Spring Pin for Light Load【1-5,000 Pieces Per Package】

  TAIYO STAINLESS SPRING

  Suppresses load greater than general spring pins, suitable for resin, aluminum, wood, etc.　

  • Volume Discount

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 6	Positive Tolerance	4 ～ 50	Spring Pins	Standard	1.2 ～ 6.4	Stainless Steel	Light Load	1.1 ～ 6.2	Glossy Finishing	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.

  From: ₹ 0.90
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin With Internal Thread h7

  OHKITA

  Internal threading makes insertion easy.
  The tolerance is h7.
  Material = S45C equivalent; hardness = HRC45 to 52; quenched and tempered.
  Material = SUS303 Equivalent. Use for applications where corrosion resistance is required.
  

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 13	-	15 ～ 50	Straight / Dual-Fit Dowel	Tapped	-	Stainless Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 399.99
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooved Pin, C Type

  OHKITA

  This simple dowel pin does not require fitting hole accuracy.
  Connects using the protrusions molded on both side of the groove.
  The fitting hole recommended tolerance for a nominal diameter of up to 3 mm is H9, and H11 for anything larger.
  Material = free-cutting steel; surface processing = nominal diameter less than 4 mm: unprocessed, 4 mm or more: black oxide finish.
  Material = A1 (Stainless Steel)

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 4	-	4 ～ 30	-	Standard	1.05 ～ 4.25	Stainless Steel	Regular	-	-	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 60.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel Parallel Pin With Internal Thread m6

  HIMENO PRECISION

  [Features]·Stainless steel parallel pin with positive tolerance internal thread (A type m6).

  • Volume Discount

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 13	Positive Tolerance	15 ～ 80	Straight / Dual-Fit Dowel	Tapped	-	Stainless Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 137.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel Parallel Pin (Hard)【1-30,000 Pieces Per Package】

  TAIYO STAINLESS SPRING

  Outer diameter dimensions are more accurate than those of the B type. Used for rotating shafts, hinges, etc.
  
  After cutting, the product undergoes centerless grinding and finishing to ensure straightness, roundness, and outer diameter dimensions.
  Made of stainless steel, it is suitable for home appliance, medical, and food-related applications.
  

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 3	Negative Tolerance	3 ～ 35	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	Regular	-	Not Provided / Glossy Finishing	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.

  From: ₹ 1.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin Class B, h7 SUS303

  OHKITA

  A dowel pin made of SUS303.
  Use for applications that require corrosion resistance.
  The shape of the end surfaces is the same.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 20	Negative Tolerance	4 ～ 100	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 51.99
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin With Internal Thread m6

  OHKITA

  Internal threading makes insertion easy.
  The tolerance is m6.
  Material = S45C equivalent; hardness = HRC45 to 52; quenched and tempered.
  Material = SUS303 Equivalent. Use for applications where corrosion resistance is required.
  

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 13	-	15 ～ 50	Straight / Dual-Fit Dowel	Tapped	-	Stainless Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 399.99
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spring Pin (for Light Loads)【1-1,000 Pieces Per Package】

  OCHIAI

  The opening section is wave-shaped to prevent product entanglement.

  • Volume Discount

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1.6 ～ 4	Positive Tolerance	5 ～ 50	Spring Pins	Standard	1.8 ～ 4.4	Stainless Steel	Light Load	1.7 ～ 4.2	Not Provided	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.

  From: ₹ 2.40
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooved Pin C Type【1-1,000 Pieces Per Package】

  SUNCO

  [Features]There is a horizontal groove with same thickness. [Materials]Can choose from steel or stainless steel.

  CAD ：

  2D / 3D

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 4	Positive Tolerance	4 ～ 30	Spring Pins	Standard	1 ～ 4.25	Stainless Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.

  From: ₹ 17.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin, Class A, m6 SUS316

  OHKITA

  A dowel pin made of SUS316.
  Resistance to pitting and gap corrosion has been improved through the use of SUS303.
  Features outstanding corrosion resistance to media such as sea water or salt water.
  The shape of the end surfaces varies on each side, but insertion should generally be from the flat tip.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  2 ～ 6	Positive Tolerance	4 ～ 30	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 144.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dowel, Positive Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: +0.01/+0.005

  MISUMI

  [Features]A dowel with over tolerance. [Shape]Straight / stepped parallel; Material: SUS304 and SUS440C.

  • Volume Discount

  CAD ：

  2D / 3D

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  2 ～ 6	Positive Tolerance	6 ～ 25	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	-	-	-	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 50.00
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  General-Purpose Pin, End Shape: Both Sides Tapered. Fit Tolerance: g6

  MISUMI

  [Features]A general-purpose pin with an outer diameter tolerance of g6. [Shape]Straight / stepped parallel; Material: SUJ2 and SUS440C.

  • Volume Discount

  CAD ：

  2D / 3D

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 10	Negative Tolerance	10 ～ 40	Straight / Dual-Fit Dowel	Tapped	-	Stainless Steel	-	-	-	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 207.80
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel Parallel Pin (Soft)【1-30,000 Pieces Per Package】

  TAIYO STAINLESS SPRING

  Outer diameter dimensions are less accurate than those of the A type. Used for rotating shafts, hinges, etc.
  After cutting, the product undergoes centerless grinding and finishing to ensure straightness, roundness, and outer diameter dimensions.
  Made of stainless steel, it is suitable for home appliance, medical, and food-related applications.
  

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 5	Positive Tolerance	3 ～ 35	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	Regular	-	Not Provided / Glossy Finishing	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.

  From: ₹ 1.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin (B-Type, Made By Ohkita)【100-1,000 Pieces Per Package】

  SUNCO

  [Material] SUS316
  [Shape] Both ends flat tipped
  [Tolerance] h7

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  2 ～ 6	Negative Tolerance	5 ～ 30	Straight / Dual-Fit Dowel	Standard	2 ～ 6	Stainless Steel	Regular	1.99 ～ 5.988	Not Provided	Box, Pkg.

  From: ₹ 39.81
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Super Shaft　M6【5-30 Pieces Per Package】

  KS SANGYO

  Parallel pin of the old JIS m6 (plus tolerance).

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  0.1 ～ 6	Positive Tolerance	2 ～ 60	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	-	-	-	Box, Pkg.

  From: ₹ 39.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel Parallel Pin, B Type/Soft (h7)【100 Pieces Per Package】

  TAIYO STAINLESS SPRING

  Outer diameter dimensions are less accurate than that of the A type. Used for rotating shafts, hinges, etc.
  * "h7" is the JIS fitting tolerance.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  4 ～ 6	Negative Tolerance	8 ～ 28	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	Regular	-	Not Provided	Box, Pkg.

  From: ₹ 12.29
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S45C-Q Parallel Pin, B Type/Hard (h7)【100 Pieces Per Package】

  TAIYO STAINLESS SPRING

  Outer diameter dimensions are less accurate than that of the A type. Used for rotating shafts, hinges, etc.
  * "h7" is the JIS fitting tolerance.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 6	Negative Tolerance	12 ～ 16	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	Regular	-	Not Provided	Box, Pkg.

  From: ₹ 12.71
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pin (steel/stainless steel)【1-1,000 Pieces Per Package】

  SUNCO

  [Shape] Taper
  [Shaft diameter tolerance] Plus tolerance
  [Shaft end shape] Standard
  [Characteristics] General
  [Nominal size] 1/1.2/1.5/1.6/2/2.5/3/4/5/6/7/8/10/12/13/16/20
  [Material] Steel / stainless steel
  [Surface treatment] None
  [Hardening] None

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 20	Positive Tolerance	6 ～ 200	Tapered	Standard	-	Stainless Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.

  From: ₹ 31.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tapered Pin With Inner Screw【1-50 Pieces Per Package】

  OHKITA

  [Features]Easy to insert via internal thread. [Shape]Can choose from taper; material: S45C and SUS303.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 13	Positive Tolerance	20 ～ 60	Tapered	Tapped	-	Stainless Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.

  From: ₹ 263.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spring Pin (Stainless Steel Waveform / For Light Loads) Solar Stainless Steel Spring【1-5,000 Pieces Per Package】

  SUNCO

  Spring pins used for purposes such as connecting, positioning, and preventing screws from rotating.
  [Features]
  ·Generic name for several types of pins to drive.
  ·A rod-shaped or roll-shaped product consisting of two or more parts is inserted into a precise hole.
  ·Spring force in the radial direction is used by forming a gap at the seam of a springy plate by rounding it.
  ·It is possible to have multiple roles such as stopper and hinge.
  ·When a dynamic load is applied, it is recommended to use the specified insertion direction.
  [Applications]
  ·Compared to general use, the thickness of the plate is thin and the mating material is aluminum or resin, making it suitable for places where the insertion load is kept low.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 6	-	4 ～ 63	-	-	-	Stainless Steel	-	-	-	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.

  From: ₹ 1.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin, Class B, h7 SUS316

  OHKITA

  A dowel pin made of SUS316.
  Resistance to pitting and gap corrosion has been improved through the use of SUS303.
  Features outstanding corrosion resistance to media such as sea water or salt water.
  The shape of the end surfaces is the same.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  2 ～ 6	Negative Tolerance	4 ～ 30	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 144.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Taper Pin SUS303

  OHKITA

  Positioning pin with a 1/50 taper.
  Use for applications that require corrosion resistance.
  Material = SUS303 Equivalent

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 20	Positive Tolerance	6 ～ 200	Tapered	Standard	-	Stainless Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 116.01
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Nominal Dia.
Shaft Dia. Tolerance
Length
Shape
End Shape
Outer Dia. (Max.)(mm)
Material
Properties
Outer Dia. (Min.)(mm)
Surface Treatment
Sales Unit

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	HIMENO PRECISION	HIMENO PRECISION	OHKITA	MISUMI	MISUMI	TAIYO STAINLESS SPRING	MISUMI	MISUMI	OCHIAI	MISUMI	HIMENO PRECISION	OHKITA	MISUMI	TAIYO STAINLESS SPRING	KS SANGYO	MISUMI	MISUMI	TAIYO STAINLESS SPRING	OHKITA	OHKITA	HIMENO PRECISION	TAIYO STAINLESS SPRING	OHKITA	OHKITA	OCHIAI	SUNCO	OHKITA	MISUMI	MISUMI	TAIYO STAINLESS SPRING	SUNCO	KS SANGYO	TAIYO STAINLESS SPRING	TAIYO STAINLESS SPRING	SUNCO	OHKITA	SUNCO	OHKITA	OHKITA
Product Series	Dowel, Positive Tolerance, End Shape: One Side Tapered, One Side Spherical, Fit Tolerance: +0.01/+0.005	Spring Pins	Dowel (MSTP/MSTPC/MSTPCS) -Plus Tolerance- [Listed in Mechanical Parts Catalog]	Dowel, Negative Tolerance, End Shape: One Side Tapered, One Side Spherical, Fit Tolerance: h7	Dowel (MST/MSTM/MSTMS) -Plus Tolerance- [Listed in Mechanical Parts Catalog]	Dowel Pin -Minus Tolerance- [Published in mechanical parts catalog]	Parallel Pin B Type【1-50 Pieces Per Package】	Parallel Pin A Type	Taper Pin With External Thread【1-100 Pieces Per Package】	Stepped Dowel Pins - Standard with Tapped Hole	Dual Fit Dowel Pins - p6-h7 p6-g6	Straight Type Spring Pin for General Use【1-5,000 Pieces Per Package】	Dowel, Positive Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: p6	Dowel, Negative Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: h7	Spring Pin (for General Purposes)【1-1,000 Pieces Per Package】	Dowel, Negative Tolerance, End Shape: Chamfer Edge on Both Sides, Fit Tolerance: h7	Taper Pin【1-25 Pieces Per Package】	Parallel Pin, Class A, m6 SUS303	Dowel, Positive Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: +0.002/0	Spring Pin, Wave Type, for General Use【1-5,000 Pieces Per Package】	Super Shaft　H7【5-30 Pieces Per Package】	Dual Fit Dowel Pins - Hollow, Tapped	General-Purpose Pin, End Shape: One Side Tapered, One Side Spherical, Fit Tolerance: g6	Wave Type Spring Pin for Light Load【1-5,000 Pieces Per Package】	Parallel Pin With Internal Thread h7	Grooved Pin, C Type	Stainless Steel Parallel Pin With Internal Thread m6	Stainless Steel Parallel Pin (Hard)【1-30,000 Pieces Per Package】	Parallel Pin Class B, h7 SUS303	Parallel Pin With Internal Thread m6	Spring Pin (for Light Loads)【1-1,000 Pieces Per Package】	Grooved Pin C Type【1-1,000 Pieces Per Package】	Parallel Pin, Class A, m6 SUS316	Dowel, Positive Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: +0.01/+0.005	General-Purpose Pin, End Shape: Both Sides Tapered. Fit Tolerance: g6	Stainless Steel Parallel Pin (Soft)【1-30,000 Pieces Per Package】	Parallel Pin (B-Type, Made By Ohkita)【100-1,000 Pieces Per Package】	Super Shaft　M6【5-30 Pieces Per Package】	Stainless Steel Parallel Pin, B Type/Soft (h7)【100 Pieces Per Package】	S45C-Q Parallel Pin, B Type/Hard (h7)【100 Pieces Per Package】	Taper Pin (steel/stainless steel)【1-1,000 Pieces Per Package】	Tapered Pin With Inner Screw【1-50 Pieces Per Package】	Spring Pin (Stainless Steel Waveform / For Light Loads) Solar Stainless Steel Spring【1-5,000 Pieces Per Package】	Parallel Pin, Class B, h7 SUS316	Taper Pin SUS303
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D				2D / 3D	2D / 3D		2D / 3D	2D / 3D		2D / 3D			2D / 3D			2D / 3D	2D / 3D									2D / 3D		2D / 3D	2D / 3D
From	₹ 16.14	₹ 6.00	₹ 59.79	₹ 13.00	₹ 207.80	₹ 207.80	₹ 21.00	₹ 19.00	₹ 272.00	₹ 457.16	₹ 332.48	₹ 6.00	₹ 332.48	₹ 161.05	₹ 2.00	₹ 57.00	₹ 46.00	₹ 51.99	₹ 135.07	₹ 2.00	₹ 1,180.38	₹ 602.62	₹ 176.63	₹ 2.00	₹ 399.99	₹ 60.00	₹ 137.60	₹ 14.38	₹ 51.99	₹ 399.99	₹ 3.00	₹ 53.45	₹ 144.00	₹ 50.00	₹ 207.80	₹ 13.15	₹ 10,624.00	₹ 1,180.38	₹ 1,228.29	₹ 1,270.33	₹ 55.04	₹ 263.20	₹ 6.00	₹ 144.00	₹ 116.01
Days to Ship	Same day or more	Same day or more	Same day or more	Same day or more	Same day or more	Same day or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	Same day or more	5 Day(s) or more	6 Day(s) or more	Same day or more	5 Day(s) or more	Same day or more	5 Day(s) or more	5 Day(s) or more	Same day or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	Same day or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	9 Day(s) or more	9 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Nominal Dia.	1 ～ 12	2 ～ 6	5 ～ 13	1 ～ 10	5 ～ 10	5 ～ 10	1 ～ 16	1 ～ 16	5 ～ 12	5 ～ 13	3 ～ 12	1 ～ 10	6 ～ 12	5 ～ 12	1 ～ 6	2 ～ 8	1 ～ 20	1 ～ 20	1 ～ 10	1 ～ 10	0.1 ～ 6	6 ～ 12	2 ～ 8	1 ～ 6	5 ～ 13	1 ～ 4	5 ～ 13	1 ～ 3	1 ～ 20	5 ～ 13	1.6 ～ 4	1 ～ 4	2 ～ 6	2 ～ 6	5 ～ 10	1 ～ 5	2 ～ 6	0.1 ～ 6	4 ～ 6	5 ～ 6	1 ～ 20	5 ～ 13	1 ～ 6	2 ～ 6	1 ～ 20
Shaft Dia. Tolerance	Positive Tolerance	Positive Tolerance	Positive Tolerance	Negative Tolerance	Positive Tolerance	Negative Tolerance	Negative Tolerance	Positive Tolerance	Positive Tolerance	Positive Tolerance	Negative Tolerance	Positive Tolerance	Positive Tolerance	Negative Tolerance	Positive Tolerance	Negative Tolerance	Positive Tolerance	Positive Tolerance	Positive Tolerance	Positive Tolerance	Negative Tolerance	Negative Tolerance	Negative Tolerance	Positive Tolerance	-	-	Positive Tolerance	Negative Tolerance	Negative Tolerance	-	Positive Tolerance	Positive Tolerance	Positive Tolerance	Positive Tolerance	Negative Tolerance	Positive Tolerance	Negative Tolerance	Positive Tolerance	Negative Tolerance	Negative Tolerance	Positive Tolerance	Positive Tolerance	-	Negative Tolerance	Positive Tolerance
Length	5 ～ 60	5 ～ 56	10 ～ 60	5 ～ 60	10 ～ 40	10 ～ 45	4 ～ 100	4 ～ 100	35 ～ 100	15 ～ 70	8 ～ 40	4 ～ 56	15 ～ 45	10 ～ 50	4 ～ 63	6 ～ 20	6 ～ 160	4 ～ 120	5 ～ 60	4 ～ 100	2 ～ 65	12 ～ 40	6 ～ 20	4 ～ 50	15 ～ 50	4 ～ 30	15 ～ 80	3 ～ 35	4 ～ 100	15 ～ 50	5 ～ 50	4 ～ 30	4 ～ 30	6 ～ 25	10 ～ 40	3 ～ 35	5 ～ 30	2 ～ 60	8 ～ 28	12 ～ 16	6 ～ 200	20 ～ 60	4 ～ 63	4 ～ 30	6 ～ 200
Shape	Straight / Dual-Fit Dowel	Spring Pins	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Tapered	Stepped	Straight / Dual-Fit Dowel	Spring Pins	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Spring Pins	Straight / Dual-Fit Dowel	Tapered	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Spring Pins	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Spring Pins	Straight / Dual-Fit Dowel	-	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Spring Pins	Spring Pins	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Tapered	Tapered	-	Straight / Dual-Fit Dowel	Tapered
End Shape	Standard	Standard	Tapped	Standard	Tapped	Tapped	Standard	Standard	External Thread	Standard / Tapped	Standard	Standard	Tapped	Tapped	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Tapped	Standard	Standard	Tapped	Standard	Tapped	Standard	Standard	Tapped	Standard	Standard	Standard	Standard	Tapped	Standard	Standard	Standard	Standard	Standard	Standard	Tapped	-	Standard	Standard
Outer Dia. (Max.)(mm)	-	2.25 ～ 6.4	-	-	-	-	-	-	-	-	-	1.2 ～ 10.6	-	-	1.2 ～ 6.4	-	-	-	-	1.2 ～ 10.6	-	-	-	1.2 ～ 6.4	-	1.05 ～ 4.25	-	-	-	-	1.8 ～ 4.4	1 ～ 4.25	-	-	-	-	2 ～ 6	-	-	-	-	-	-	-	-
Material	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
Properties	-	Regular	-	-	-	-	-	-	Regular	-	-	Regular	-	-	Regular	-	-	Regular	-	Regular	-	-	-	Light Load	Regular	Regular	Regular	Regular	Regular	Regular	Light Load	Regular	Regular	-	-	Regular	Regular	-	Regular	Regular	Regular	Regular	-	Regular	Regular
Outer Dia. (Min.)(mm)	-	2.15 ～ 6.2	-	-	-	-	-	-	-	-	-	1.1 ～ 10.3	-	-	1.1 ～ 6.2	-	-	-	-	1.1 ～ 10.3	-	-	-	1.1 ～ 6.2	-	-	-	-	-	-	1.7 ～ 4.2	-	-	-	-	-	1.99 ～ 5.988	-	-	-	-	-	-	-	-
Surface Treatment	-	Not Provided	-	-	-	-	Not Provided	Not Provided	Not Provided	-	-	Glossy Finishing	-	-	Not Provided	-	Not Provided	Not Provided	-	Glossy Finishing	-	-	-	Glossy Finishing	Not Provided	-	Not Provided	Not Provided / Glossy Finishing	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	-	Not Provided / Glossy Finishing	Not Provided	-	Not Provided	Not Provided	Not Provided	Not Provided	-	Not Provided	Not Provided
Sales Unit	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Box, Pkg.	Box, Pkg.	Box, Pkg.	Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)

Loading...