Conveyer Rollers（Bearing：Double）

• You can add up to 6 items per a category to the compare list. Compare

  

  Conveyor Rollers-Metal/Steel

  MISUMI

  Roller for metal conveyor with bearing. Materials can be selected from steel, aluminum alloy, and stainless steel (SUS304).

  CAD ：

  2D / 3D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	19 ～ 57.2	Steel / Stainless Steel / Aluminum	Shaft	Double	-	-	Not Provided / Clear Anodize / Hard Chrome Plating / Zinc Plating	-	-	-	-	-	-	-	-	-

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Miniature Rollers for Conveyors

  MISUMI

  Conveyor roller with bearing. You can choose from two types of material: steel or stainless steel.
  For steel type, surface treatment can be selected from trivalent chromate or hard chrome plating.
  Please use MISUMI's conveyor roller shaft and snap pin for the installation shaft.

  • Volume Discount

  CAD ：

  2D / 3D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	20	Steel	Shaft	Double	50 ～ 100	-	Chromate	-	-	-	Not Provided	-	-	-	-	-

  From: ₹ 838.96
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Conveyor Rollers - Shaft & Roller Sets

  MISUMI

  This is a set of conveyor rollers and shafts. The pipe shaft and pins required for installation are included as a set, reducing the hassle of arranging parts.
  The conveyor rollers, pipe shafts, and pins are all made of steel, and the surface treatment is trivalent chromate.
  For roller strength, please refer to the specification table.

  • Volume Discount

  CAD ：

  2D / 3D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	19.1 ～ 57.2	Steel	Shaft	Double	100 ～ 506	-	-	-	-	-	Not Provided	-	-	-	-	-

  From: ₹ 816.89
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel Roller, M Series (RS-1010), Diameter φ 10 × Width 50 - 200

  MAKITECH

  Ultra-fine φ10 stainless steel roller which employs a standard bearing. Roller unit parts for RS-1010, suitable for small item transport.
  
  [Features]
  · The roller diameter is φ10.0. The roller interval is P12.4.
  · Standard roller width (nominal) is 50W to 200W in increments of 50mm.
  · Standard bearing: high durability.
  · Aluminum extrusion

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	10	Stainless Steel	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Stainless Steel	-

  Days to Ship: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Conveyor Rollers-Urethane Lined Type

  MISUMI

  Urethane lined conveyor roller with bearing. The core metal material can be selected from steel, aluminum alloy, and stainless steel (SUS304).
  Please refer to the specification table for roller strength.
  The shore (hardness) of urethane is A90, A70, A50, and the color is natural. Urethane thickness can be selected from 3, 4, and 5.
  A90 is ether urethane, A50/A70 is ester urethane.
  Additionally, the urethane of Shore A90 can be changed to antistatic urethane through additional machining (UDC).

  CAD ：

  2D / 3D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	19 ～ 57.2	Steel / Stainless Steel	Shaft	Double	-	-	Not Provided	-	-	-	-	Urethane Rubber	50 ～ 90	Natural Color	-	-

  Days to Ship: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Conveyor Rollers-Plastic

  MISUMI

  This is a resin type conveyor roller. The material of the roller is polyacetal.
  You can specify the total length in 1mm increments up to a maximum of 513mm.
  Please use MISUMI's conveyor roller shaft and snap pin for the installation shaft.

  CAD ：

  2D / 3D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	20 ～ 50	Plastic	Shaft	Double	-	-	Not Provided	-	-	-	Not Provided	-	-	-	-	-

  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel Roller, M Series (RS-1912), Diameter φ 19 × Width 100 - 500

  MAKITECH

  A small-diameter ⌀ 19-mm stainless steel roller. Suitable for transporting small objects. A single roller unit for the RS-1912 roller conveyor. The widths of the roller can be specified in 1-mm increments from 100–500 mm.
  
  [Features]
  · The roller diameter is ⌀ 19.0 mm. The minimum roller interval is P25.
  · The standard roller width (nominal) is 100–500 mm in increments of 50 mm.
  · This roller can also be manufactured in non-standard sizes.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	19	Stainless Steel	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Stainless Steel	-

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Steel Roller (Roller for Conveyor); M Series (R-3816), Diameter φ 38.1 × Roller Width 100 - 1000

  MAKITECH

  Moderate to light load φ38 / thickness t1.6 steel roller with enhanced shock resistance and strength. Roller unit of the R-3816 roller conveyor. The widths can be specified in 1 mm increments from 100 to 1000 mm.
  
  [Features]
  · The roller diameter is φ38.1. The thickness is t1.6. The shock resistance is improved. The minimum roller interval is P50.
  · Standard roller width (nominal) is 100W to 1000W in 50mm increments.
  · Can be manufactured to desired size.
  · Machined bearings, high quality.
  · Model 60 frame standard type

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	38.1	Steel	-	Double	-	-	Zinc Plating	Standard	-	-	Not Provided	-	-	-	Steel	-

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chain Drive Roller Single Unit Medium Load Type CSS4SB/CSS4SS/CSS4WS

  OKURA

  [Features]
  ・ Achieves reliable transportation with zero slip loss
  
  "CSS4SB Resin sprocket (with bearing)"
  ・ Low noise design using # 40 resin sprocket
  ・ With or without shaft can be selected (Shaft and accessories not included)
  
  "CSS4SS Steel sprocket (with bearings)"
  ・ # 40 Long lifespan design using steel sprockets
  ・ With or without shaft can be selected (Shaft and accessories not included)
  
  "CSS4WS Steel Sprocket Double (with bearings)"
  ・ #40 Roller with 2 rows of steel sprockets
  ・ With or without shaft can be selected (Shaft and accessories not included)
  [Applications]
  ・ Medium heavy load type using ø57 steel rollers

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  With Sprocket	Long Roller	57	Steel	No Shaft (Round Hole)	Double	486	Standard	Not Provided	Standard	-	-	Not Provided	-	-	-	-	-

  From: ₹ 5,546.39
  Days to Ship: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Steel Roller (Conveyor Roller) M Series (R-1912P)

  MAKITECH

  Popular φ19 individual roller for low-cost R-1912P roller conveyor, which is optimal for light / small item transport. The widths can be specified in 1 mm increments from 100 to 500 mm.
  
  [Features]
  · The roller diameter is φ19.1. The minimum roller interval is P20.
  · Standard roller width (nominal) is 100W to 500W in 50mm increments.
  · Can be manufactured to desired size.
  · Popular product, pressed-in bearing, inexpensive type, and φ19.
  · Model 60 frame standard type

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	19.1	Steel	-	Double	-	-	Zinc Plating	Standard	-	-	Not Provided	-	-	-	Steel	-

  Days to Ship: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Weston Roller, Single-Phase High Torque Type, RP Type

  ARAI MFG

  General purpose design for continuous or intermittent operation.
  
  [Features]
  • Built-in precision induction motor and planetary gear unit producing rotational force
  • Sintered alloy planetary gears which are resistant to high torque and offer quiet, long-life operation
  • Full electrical control for wide-ranging applications, such as divergence/convergence units and up-down units
  • Ball bearings for all rotating parts to give smooth operation

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  -	Long Roller	57 ～ 60.5	-	Shaft	Double	300 ～ 600	Standard	-	-	Single-phase100V / Single-phase 200V	-	-	-	-	-	Steel	-

  Days to Ship: 20 Day(s) or more

  20 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Steel Roller; M Series (R-5015P); Diameter φ50.8 × Width 100 - 1000

  MAKITECH

  Moderate load type φ 50 steel rollers. Roller unit of the R-5015P roller conveyor. The widths can be specified in 50 mm increments from 100 to 1, 000 mm.
  
  [Features]
  · The roller diameter is 50.8 mm. The minimum roller interval is P75.
  · The standard of the roller width (nominal) is 100 to 1, 000 mm at intervals of 50 mm.
  · Pressed-in bearing; inexpensive type.
  · Model 90 frame standard type.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	50.8	Steel	-	Double	-	-	Zinc Plating	Standard	-	-	Not Provided	-	-	-	Steel	-

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel Roller, S Series (SS-4212), Diameter φ 42.7 × Width 90 - 790

  MAKITECH

  [Features]
  - φ42 stainless steel roller.
  Individual roller for SS-4212 moderate load roller conveyor.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	42.7	Stainless Steel	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Stainless Steel	-

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Steel Roller, M Series (R-3812P) Diameter φ38.1 × Width 100 - 1000

  MAKITECH

  Bestselling R-3812P individual roller, offering the most versatility in its class. Widths can be specified in 50 mm increments from 100 to 1, 000 mm.
  
  [Features]
  • Roller diameter is φ38.1. Minimum roller spacing is P50.
  • Standard roller width (nominal) is 100W to 1, 000W at intervals of 50mm.
  • Most versatile type for transporting medium light loads and heavy loads.
  • Pressed-in bearing, inexpensive type, and φ38 is a big seller.
  • Model 60 frame standard type

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	38.1	Steel	-	Double	-	-	Zinc Plating	Standard	-	-	Not Provided	-	-	-	Steel	-

  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Conveyor Roller (for Light Loads) SERIES FF1

  FUJI SEISAKUSHO

  [Features]
  Achieves smooth rotation along with miniaturization / weight reduction and low noise, while also featuring shock resistance in addition to chemical resistance, corrosion resistance and elasticity.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	18 ～ 57	Plastic	No Shaft (Round Hole)	Double	100 ～ 600	-	Not Provided	Standard / Chemical Resistance	-	-	-	-	-	-	Steel / Stainless Steel	-

  From: ₹ 787.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Conveyor Roller (for Medium/Heavy　Load) SERIES FF7

  FUJI SEISAKUSHO

  [Features]
  - Multipurpose roller with superior shock resistance and quiet performance.
  - Housing employs polycarbonate, which confers excellent shock resistance.
  - Multipurpose roller which can be used in a wide variety of different fields.
  - Both press bearings (steel, stainless steel) and precision bearings (6002ZZ) are available for the bearing element.
  - Additionally, either hardened polyvinyl chloride (PVC) or steel (ST) can be used for the tube material, depending on the application.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	50 ～ 57	Plastic	No Shaft (Round Hole)	Double	100 ～ 700	-	Not Provided	Standard / Low Noise	-	-	-	-	-	-	Steel	-

  From: ₹ 1,829.78
  Days to Ship: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Steel Tapered Roller Starter, Diameter ø42.7 (R500) × Width 305 to 690 (CTR Type)

  OKURA

  Compact design with a frame internal radius of 500 mm. Transport distance and roller width can be specified within the range of 305 - 690 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Tapered	Long Roller	42.7	Steel	Shaft	Double	490	-	Not Provided	Standard	-	-	Not Provided	-	-	-	Steel	-

  From: ₹ 5,648.58
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀25.4 × Width 90 - 490 (KR Type)

  OKURA

  [Features]
  • Best suited for transport of lightweight, small items.
  • Transport lengths and roller width can be specified within the range of 90 - 490 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	25.4	Steel	No Shaft (Round Hole) / Shaft	Double	90 ～ 490	-	Not Provided	Standard	-	-	Not Provided	-	-	-	Steel	-

  From: ₹ 715.20
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Steel rollers (rollers for conveyors) M series (R-5714NB)

  MAKITECH

  Medium load φ57 roller which employs a standard bearing for quiet operation and high durability. Roller unit of the R-5714NB roller conveyor.
  
  [Features]
  · Easy to install due to the bearing and resin integrated boss.
  · Silent type.
  · High durability thanks to standard bearing

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	57.2	Steel	-	Double	-	-	Zinc Plating	Standard	-	-	Not Provided	-	-	-	Steel	-

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Steel Roller Unit (Conveyor Roller), Diameter ø60.5 × Width 90-990 (MR Model)

  OKURA

  Heavy duty steel roller. Transport distance and roller width can be specified within the range of 90 - 990 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	60.5	Steel	No Shaft (Round Hole) / Shaft	Double	90 ～ 990	-	Not Provided	Standard	-	-	Not Provided	-	-	-	Steel	-

  From: ₹ 1,149.60
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀76.3 × Width 150 - 1190 (NHR Type)

  OKURA

  Roller diameter ⌀76.3 is the largest for steel rollers. For heavy objects measured in units of tons. Transport distance and roller width can be specified within the range of 150 - 1190 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	76.3	Steel	No Shaft (Round Hole) / Shaft	Double	150 ～ 1190	-	Not Provided	Standard	-	-	Not Provided	-	-	-	Steel	-

  From: ₹ 2,930.95
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Steel Roller, M Series (R-7638N), Diameter φ 76.3 × Width 100 - 1000

  MAKITECH

  Heavy-duty φ 76 steel roller. Galvanized roller surface. Roller unit of the R-7638N roller conveyor. The widths can be specified in 1 mm increments from 100 to 1, 000 mm.
  
  [Features]
  · The roller diameter is 76.3 mm with a thickness of T3.8, with pipe plating; minimum roller interval: P100.
  · The standard roller width (nominal) is 100 to 1, 000 mm at intervals of 50 mm.
  · Configurable size is available.
  · Machined bearings: High quality.
  · 90 type frame, standard type.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	76.3	Steel	-	Double	-	-	Zinc Plating	Standard	-	-	Not Provided	-	-	-	Steel	-

  Days to Ship: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Resin Roller, M Series (JR-3823), Diameter φ38 × Width 100 - 500

  MAKITECH

  A general purpose ⌀ 38-mm resin roller. Suitable for transporting light loads. A single roller unit for the JR-3823 roller conveyor. The widths of the roller can be specified in 1-mm increments from 100–500 mm.
  
  [Features]
  · The roller diameter is ⌀ 38 mm. The minimum roller interval is P50.
  · The standard roller width (nominal) is 100–500 mm in increments of 50 mm.
  · This roller can also be manufactured in non-standard sizes. Utilizes an aluminum frame.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	38	Plastic	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic	-

  Days to Ship: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel Tapered Roller (Roller for Conveyor), M Series (R900), Diameter φ 44.7 x Width 200 - 600

  MAKITECH

  A light to medium load type with the inside frame radius of 900 mm. Roller unit of the RS-TC900 roller conveyor. The widths can be specified in 1 mm increments from 200 to 600 mm.
  
  [Features]
  · 90 degree angle for 900 mm internal diameters.
  · Standard roller width (nominal) is 200W to 600W in 50mm increments.
  · Can be manufactured to desired size.
  · Pressed-in bearing.
  · Stainless steel frame

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	44.7	Stainless Steel	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Stainless Steel	-

  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Steel Roller (Conveyor Roller), S Series (Standard Bearing), Diameter φ 12.0 × Width 90 - 390

  MAKITECH

  High durability φ 12 mm roller which employs a standard bearing. Suitable for transporting small parts. Roller unit of the S-1216NB roller conveyor.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	12	Steel	-	Double	-	-	Zinc Plating	Standard	-	-	Not Provided	-	-	-	Steel	-

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Motor Roller PSS-V Type

  OKURA

  ø57, V pulley type, roller width 390 to 990 mm can be specified.
  [Features]
  ・ As a drive roller with a V pulley, a free roller of the same shape is linked with a sewing-machine belt.
  ・ It includes terminal block and detent bracket.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  With Pulley	Long Roller	57	Steel	Shaft	Double	390 ～ 990	Standard	Not Provided	Standard	Three-phase 200V	-	Not Provided	-	-	-	-	-

  From: ₹ 28,511.43
  Days to Ship: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Motor Roller PSS Type

  OKURA

  ø57 standard type roller width from 305 up to 990 mm can be specified.
  [Features]
  ・ This is a compatible general-purpose motor roller with the same diameter (ø57) as the SR type free roller.
  ・ A wide range of specifications such as roller width and speed are available to support various operating conditions such as continuous operation and intermittent operation.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  With Motor	Long Roller	57	Steel	Shaft	Double	305 ～ 990	Standard	Not Provided	Standard	Single-phase100V / Three-phase 200V	-	Not Provided	-	-	-	-	-

  From: ₹ 18,842.51
  Days to Ship: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Motor Roller PNP Type

  OKURA

  Taper skate wheel type for ø42.7 × R900 Roller width 305 to 690 mm can be specified.
  [Features]
  ・ A type with tapered rollers to smoothly curve the transported object.
  ・ The curve radius is R900.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Tapered	Long Roller	-	Steel	Shaft	Double	305 ～ 690	Standard	Not Provided	Standard	Single-phase100V / Three-phase 200V	-	Not Provided	-	-	-	-	-

  From: ₹ 32,127.79
  Days to Ship: 17 Day(s) or more

  17 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀32 × Width 90 - 620 (FR Type)

  OKURA

  More economical than KR when work dimensions are 150 mm or less. Transport distance and roller width can be specified within the range of 90 - 620 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	32	Steel	No Shaft (Round Hole) / Shaft	Double	90 ～ 620	-	Not Provided	Standard	-	-	Not Provided	-	-	-	Steel	-

  From: ₹ 715.20
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀48.6 × Width 90 - 790 (LR Type)

  OKURA

  Medium load ⌀48.6 steel roller. Transport distance and roller width can be specified within the range of 90 - 790 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	48.6	Steel	No Shaft (Round Hole) / Shaft	Double	150 ～ 690	-	Not Provided	Standard	-	-	Not Provided	-	-	-	Steel	-

  From: ₹ 1,077.60
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Unit Plastic Roller (Roller for Conveyor), Diameter ⌀50 × Width 90 - 620 (BBR Type)

  OKURA

  ⌀50 resin roller for light loads. Transport distance and roller width can be specified within the range of 90 - 620 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	50	Plastic	No Shaft (Round Hole) / Shaft	Double	90 ～ 620	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic	-

  From: ₹ 2,249.60
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Steel Roller Conveyor, M Series (R-4214P), Diameter φ 42.7 x Width 100 - 500

  MAKITECH

  φ42 steel roller for transport of moderate / light loads. Roller unit of the R-4214P roller conveyor. The widths can be specified in 50 mm increments from 100 to 1000 mm.
  
  [Features]
  · The roller diameter is φ42.7. The minimum roller interval is P50.
  · Standard roller width (nominal) is 100W to 1000W in 50mm increments.
  · Pressed-in bearing, inexpensive type.
  · Model 90 frame standard type

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	42.7	Steel	-	Double	-	-	Zinc Plating	Standard	-	-	Not Provided	-	-	-	Steel	-

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Steel roller (conveyor roller) M Series (R-5721) diameter φ 57.2 x width 100-1000

  MAKITECH

  Moderate load, high quality φ57 t2.1 thick steel roller with increased impact-resistance. Roller unit of the R-5721 roller conveyor.
  
  [Features]
  · The roller diameter is φ57.2. The thickness is t2.1. The shock resistance is improved. The minimum roller interval is P75.
  · Standard roller width (nominal) is 100W to 1, 000W in 50mm increments.
  · Machined bearings, high quality.
  · 90 Frame Standard Type

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	57.2	Steel	-	Double	-	-	Zinc Plating	Standard	-	-	Not Provided	-	-	-	Steel	-

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Steel rollers (rollers for conveyors) M series (R-4832NB)

  MAKITECH

  φ 48 mm, T3.5 roller which employs a standard bearing for quiet operation and high durability. Roller unit of the R-4832NB roller conveyor. The widths can be specified in 1 mm increments from 100 to 1, 000 mm.
  
  [Features]
  · Easy to install thanks to the bearing and resin integrated boss.
  · Silent type.
  · High durability thanks to standard bearing.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	48.6	Steel	-	Double	-	-	Not Provided	Standard	-	-	Not Provided	-	-	-	Steel	-

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless steel roller (conveyor roller) M Series (RS-6015) diameter φ 60.5 x width100-1000

  MAKITECH

  A resin flanged φ 60 stainless steel roller for moderate to light loads. Replaceable bearings. Roller unit of the RS-6015 roller conveyor. The widths can be specified in 1 mm increments from 100 to 1, 000 mm.
  
  [Features]
  · The roller diameter is 60.5 mm. The minimum roller interval is P75.
  · The standard of the roller width (nominal) is 100 to 800 mm at intervals of 50 mm.
  · Configurable size is available.
  · Standard bearing: high quality.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	60.5	Stainless Steel	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Stainless Steel	-

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Steel Tapered Roller (Roller for Conveyor), S Series (R1200), Diameter φ 48.0 × Width 240 - 620

  MAKITECH

  Light to medium load type with inside frame radius of 1, 200mm. Roller diameter is φ42.7. Roller unit of S-TC1200 roller conveyor.
  
  [Features]
  · 90 degree angle for use with 1, 200 mm internal diameters.
  Standard roller width (nominal) is 240W to 620W.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	48	Steel	-	Double	-	-	Bright Chrome Plating	Standard	-	-	Not Provided	-	-	-	Steel	-

  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Conveyor Roller (for Medium/Heavy　Load) SERIES FF3

  FUJI SEISAKUSHO

  Highly functional multi-purpose plastic conveyor rollers with improved dustproof and waterproof performance, as well as excellent impact resistance and sound deadening properties.
  [Features]
  ·For medium and heavy loads. A double labyrinth seal is used for the seal part.
  ·Press bearings (steel, stainless steel) and precision bearings (6002ZZ) are available.
  ·In addition, the tube material can be selected from hard polyvinyl chloride (PVC) and steel (ST), which have excellent impact resistance, depending on the application.
  ·The diameter can be selected from ⌀50, 51, 57, and 61 mm (diameters of 50, 51, 57, and 61 mm) according to the application.
  [Applications]
  ·Ideal for small packages, bottles, cans, foods, newspapers, magazines, textiles, lightweight cartons, and other lightweight items.
  ·Because it contains bearings, it can rotate more smoothly.
  ·Because it uses a double labyrinth seal, it is durable even in dusty and watery environments.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	50 ～ 57	Plastic	No Shaft (Round Hole)	Double	100 ～ 700	-	Not Provided	Standard / Water Resistance	-	-	-	-	-	-	Steel	-

  From: ₹ 2,519.58
  Days to Ship: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Motor Roller Standard Model RS Type

  ARAI MFG

  A general-purpose type which can be used for either continuous or intermittent operation.
  
  [Features]
  · A structure that produces rotational force from a built-in precision induction motor and planetary gear unit.
  · The planetary gear is made of sintered alloy is low-noise, long-life, and can withstand high torque.
  · Electrically controllable while conveying. Therefore, is suitable for a wide range of applications, such as branched/confluence devices and up-down equipment.
  · Smooth operation due to the use of ball bearings in each rotating part.
  · Utilizes a high impedance low-current motor. Therefore, there is no risk of burn-out even when it is left in the locked state for extended periods of time while energized. Usable for warehouse track lines for stalled movement of conveyed objects, etc.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  -	Long Roller	48.6 ～ 57	-	Shaft	Double	250 ～ 1000	Accumulation	-	-	Three-phase 200V	-	-	-	-	-	Steel	-

  Days to Ship: 20 Day(s) or more

  20 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Motor Rollers, High Torque RP Type

  ARAI MFG

  A general-purpose type used for either continuous or intermittent operation.
  
  [Features]
  - Design produces rotational force from a built-in precision induction motor and planetary gear unit. The motor roller provides higher torque than standard types.
  - Sintered alloy planetary gears are quiet, durable, and resistant to high torque.
  - Transport can be controlled electrically, making it suitable for a wide range of applications such as branch/confluence devices and up-down equipment.
  - Smooth operation thanks to ball bearings on each rotating part.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  -	Long Roller	57 ～ 60.5	-	Shaft	Double	250 ～ 1000	Standard	-	-	Three-phase 200V	-	-	-	-	-	Steel	-

  Days to Ship: 20 Day(s) or more

  20 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Motor Roller PSS-E Type

  OKURA

  ø57 drive
  ・ Free type, roller width 390 to 990 mm can be specified.
  [Features]
  ・ It is a roller that can be used as a motor roller when energized (power supply on ) and as a free roller when not energized (power supply off).
  ・ It includes terminal block and detent bracket.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  With Motor	Long Roller	57	Steel	Shaft	Double	390 ～ 990	Standard	Not Provided	Standard	Three-phase 200V	-	Not Provided	-	-	-	-	-

  From: ₹ 19,628.85
  Days to Ship: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Motor Roller PSL Type

  OKURA

  ø48.6 Standard type Roller width 305 to 690 mm can be specified.
  [Features]
  ・ It is a general-purpose type motor roller that has the same diameter (ø48.6) as the LR type free roller and is compatible.
  ・ A wide range of specifications such as roller width and speed are available to support various operating conditions such as continuous operation and intermittent operation.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  With Motor	Long Roller	48.6	Steel	Shaft	Double	305 ～ 690	Standard	Not Provided	Standard	Single-phase100V / Three-phase 200V	-	Not Provided	-	-	-	-	-

  From: ₹ 21,986.54
  Days to Ship: 15 Day(s) or more

  15 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Steel Tapered Roller Starter, Diameter ø42.7 (R900) × Width 305 to 690 (NTR Type)

  OKURA

  Dedicated tapered roller for curves. The inside frame radius is 900 mm. Transport distance and roller width can be specified within the range of 305 - 690 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Tapered	Long Roller	42.7	Steel	Shaft	Double	390 ～ 690	-	Not Provided	Standard	-	-	Not Provided	-	-	-	Steel	-

  From: ₹ 4,214.09
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Unit Steel Tapered Roller (Roller for Conveyor), Diameter ⌀57 (R900) × Width 305 - 790 (TTR Type)

  OKURA

  Durable type dedicated tapered roller for curves. The inside frame radius is 900 mm. Transport distance and roller width can be specified within the range of 305-790 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Tapered	Long Roller	57	Steel	Shaft	Double	390	-	Not Provided	Standard	-	-	Not Provided	-	-	-	Steel	-

  From: ₹ 6,049.05
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Steel Roller Unit (Conveyor Roller), Diameter ø57 × Width 90-990 (SR Type)

  OKURA

  [Features]
  • Medium load ⌀57 steel roller.
  • Transport length and roller width can be specified within the range of 90 - 990 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	57	Steel	No Shaft (Round Hole) / Shaft	Double	90 ～ 990	-	Not Provided	Standard	-	-	Not Provided	-	-	-	Steel	-

  From: ₹ 1,026.40
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀18 × Width 90 - 390 (ES Type)

  OKURA

  Stainless steel roller with minimum roller diameter of ⌀18. Optimal for transport of ultra-small materials. Transport distance and roller width can be specified within the range of 90 - 390 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	18	Stainless Steel	No Shaft (Round Hole) / Shaft	Double	90 ～ 305	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Steel	-

  From: ₹ 1,810.40
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Long Roller Type
Type
Outer Dia. D(Ø)
Roller Material
Shaft Type
Bearing
Width W(mm)
Drive
Surface Treatment
Properties
Power Supply
Short Roller Type
Lining
Lining Material
Lining Hardness(Shore A)
Lining Color
Bearing Material
Cleaning Method

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	MISUMI	MISUMI	MAKITECH	MISUMI	MISUMI	MAKITECH	MAKITECH	OKURA	MAKITECH	ARAI MFG	MAKITECH	MAKITECH	MAKITECH	FUJI SEISAKUSHO	FUJI SEISAKUSHO	OKURA	OKURA	MAKITECH	OKURA	OKURA	MAKITECH	MAKITECH	MAKITECH	MAKITECH	OKURA	OKURA	OKURA	OKURA	OKURA	OKURA	MAKITECH	MAKITECH	MAKITECH	MAKITECH	MAKITECH	FUJI SEISAKUSHO	ARAI MFG	ARAI MFG	OKURA	OKURA	OKURA	OKURA	OKURA	OKURA
Product Series	Conveyor Rollers-Metal/Steel	Miniature Rollers for Conveyors	Conveyor Rollers - Shaft & Roller Sets	Stainless Steel Roller, M Series (RS-1010), Diameter φ 10 × Width 50 - 200	Conveyor Rollers-Urethane Lined Type	Conveyor Rollers-Plastic	Stainless Steel Roller, M Series (RS-1912), Diameter φ 19 × Width 100 - 500	Steel Roller (Roller for Conveyor); M Series (R-3816), Diameter φ 38.1 × Roller Width 100 - 1000	Chain Drive Roller Single Unit Medium Load Type CSS4SB/CSS4SS/CSS4WS	Steel Roller (Conveyor Roller) M Series (R-1912P)	Weston Roller, Single-Phase High Torque Type, RP Type	Steel Roller; M Series (R-5015P); Diameter φ50.8 × Width 100 - 1000	Stainless Steel Roller, S Series (SS-4212), Diameter φ 42.7 × Width 90 - 790	Steel Roller, M Series (R-3812P) Diameter φ38.1 × Width 100 - 1000	Conveyor Roller (for Light Loads) SERIES FF1	Conveyor Roller (for Medium/Heavy　Load) SERIES FF7	Steel Tapered Roller Starter, Diameter ø42.7 (R500) × Width 305 to 690 (CTR Type)	Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀25.4 × Width 90 - 490 (KR Type)	Steel rollers (rollers for conveyors) M series (R-5714NB)	Steel Roller Unit (Conveyor Roller), Diameter ø60.5 × Width 90-990 (MR Model)	Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀76.3 × Width 150 - 1190 (NHR Type)	Steel Roller, M Series (R-7638N), Diameter φ 76.3 × Width 100 - 1000	Resin Roller, M Series (JR-3823), Diameter φ38 × Width 100 - 500	Stainless Steel Tapered Roller (Roller for Conveyor), M Series (R900), Diameter φ 44.7 x Width 200 - 600	Steel Roller (Conveyor Roller), S Series (Standard Bearing), Diameter φ 12.0 × Width 90 - 390	Motor Roller PSS-V Type	Motor Roller PSS Type	Motor Roller PNP Type	Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀32 × Width 90 - 620 (FR Type)	Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀48.6 × Width 90 - 790 (LR Type)	Single Unit Plastic Roller (Roller for Conveyor), Diameter ⌀50 × Width 90 - 620 (BBR Type)	Steel Roller Conveyor, M Series (R-4214P), Diameter φ 42.7 x Width 100 - 500	Steel roller (conveyor roller) M Series (R-5721) diameter φ 57.2 x width 100-1000	Steel rollers (rollers for conveyors) M series (R-4832NB)	Stainless steel roller (conveyor roller) M Series (RS-6015) diameter φ 60.5 x width100-1000	Steel Tapered Roller (Roller for Conveyor), S Series (R1200), Diameter φ 48.0 × Width 240 - 620	Conveyor Roller (for Medium/Heavy　Load) SERIES FF3	Motor Roller Standard Model RS Type	Motor Rollers, High Torque RP Type	Motor Roller PSS-E Type	Motor Roller PSL Type	Steel Tapered Roller Starter, Diameter ø42.7 (R900) × Width 305 to 690 (NTR Type)	Single Unit Steel Tapered Roller (Roller for Conveyor), Diameter ⌀57 (R900) × Width 305 - 790 (TTR Type)	Steel Roller Unit (Conveyor Roller), Diameter ø57 × Width 90-990 (SR Type)	Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀18 × Width 90 - 390 (ES Type)
CAD	2D / 3D	2D / 3D	2D / 3D	2D	2D / 3D	2D / 3D	2D	2D		2D	2D	2D	2D	2D					2D			2D	2D	2D	2D							2D	2D	2D	2D	2D		2D	2D
From		₹ 838.96	₹ 816.89						₹ 5,546.39						₹ 787.00	₹ 1,829.78	₹ 5,648.58	₹ 715.20		₹ 1,149.60	₹ 2,930.95					₹ 28,511.43	₹ 18,842.51	₹ 32,127.79	₹ 715.20	₹ 1,077.60	₹ 2,249.60						₹ 2,519.58			₹ 19,628.85	₹ 21,986.54	₹ 4,214.09	₹ 6,049.05	₹ 1,026.40	₹ 1,810.40
Days to Ship	7 Day(s) or more	7 Day(s) or more	Same day or more	13 Day(s) or more	10 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	14 Day(s) or more	12 Day(s) or more	20 Day(s) or more	9 Day(s) or more	9 Day(s) or more	11 Day(s) or more	5 Day(s) or more	13 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more	8 Day(s) or more	7 Day(s) or more	12 Day(s) or more	10 Day(s) or more	11 Day(s) or more	9 Day(s) or more	13 Day(s) or more	12 Day(s) or more	17 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	11 Day(s) or more	13 Day(s) or more	20 Day(s) or more	20 Day(s) or more	13 Day(s) or more	15 Day(s) or more	8 Day(s) or more	8 Day(s) or more	5 Day(s) or more	8 Day(s) or more
Long Roller Type	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	With Sprocket	Straight	-	Straight	Straight	Straight	Straight	Straight	Tapered	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	With Pulley	With Motor	Tapered	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	-	-	With Motor	With Motor	Tapered	Tapered	Straight	Straight
Type	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller
Outer Dia. D(Ø)	19 ～ 57.2	20	19.1 ～ 57.2	10	19 ～ 57.2	20 ～ 50	19	38.1	57	19.1	57 ～ 60.5	50.8	42.7	38.1	18 ～ 57	50 ～ 57	42.7	25.4	57.2	60.5	76.3	76.3	38	44.7	12	57	57	-	32	48.6	50	42.7	57.2	48.6	60.5	48	50 ～ 57	48.6 ～ 57	57 ～ 60.5	57	48.6	42.7	57	57	18
Roller Material	Steel / Stainless Steel / Aluminum	Steel	Steel	Stainless Steel	Steel / Stainless Steel	Plastic	Stainless Steel	Steel	Steel	Steel	-	Steel	Stainless Steel	Steel	Plastic	Plastic	Steel	Steel	Steel	Steel	Steel	Steel	Plastic	Stainless Steel	Steel	Steel	Steel	Steel	Steel	Steel	Plastic	Steel	Steel	Steel	Stainless Steel	Steel	Plastic	-	-	Steel	Steel	Steel	Steel	Steel	Stainless Steel
Shaft Type	Shaft	Shaft	Shaft	-	Shaft	Shaft	-	-	No Shaft (Round Hole)	-	Shaft	-	-	-	No Shaft (Round Hole)	No Shaft (Round Hole)	Shaft	No Shaft (Round Hole) / Shaft	-	No Shaft (Round Hole) / Shaft	No Shaft (Round Hole) / Shaft	-	-	-	-	Shaft	Shaft	Shaft	No Shaft (Round Hole) / Shaft	No Shaft (Round Hole) / Shaft	No Shaft (Round Hole) / Shaft	-	-	-	-	-	No Shaft (Round Hole)	Shaft	Shaft	Shaft	Shaft	Shaft	Shaft	No Shaft (Round Hole) / Shaft	No Shaft (Round Hole) / Shaft
Bearing	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double
Width W(mm)	-	50 ～ 100	100 ～ 506	-	-	-	-	-	486	-	300 ～ 600	-	-	-	100 ～ 600	100 ～ 700	490	90 ～ 490	-	90 ～ 990	150 ～ 1190	-	-	-	-	390 ～ 990	305 ～ 990	305 ～ 690	90 ～ 620	150 ～ 690	90 ～ 620	-	-	-	-	-	100 ～ 700	250 ～ 1000	250 ～ 1000	390 ～ 990	305 ～ 690	390 ～ 690	390	90 ～ 990	90 ～ 305
Drive	-	-	-	-	-	-	-	-	Standard	-	Standard	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Standard	Standard	Standard	-	-	-	-	-	-	-	-	-	Accumulation	Standard	Standard	Standard	-	-	-	-
Surface Treatment	Not Provided / Clear Anodize / Hard Chrome Plating / Zinc Plating	Chromate	-	Not Provided	Not Provided	Not Provided	Not Provided	Zinc Plating	Not Provided	Zinc Plating	-	Zinc Plating	Not Provided	Zinc Plating	Not Provided	Not Provided	Not Provided	Not Provided	Zinc Plating	Not Provided	Not Provided	Zinc Plating	Not Provided	Not Provided	Zinc Plating	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Zinc Plating	Zinc Plating	Not Provided	Not Provided	Bright Chrome Plating	Not Provided	-	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided
Properties	-	-	-	Water Resistance	-	-	Water Resistance	Standard	Standard	Standard	-	Standard	Water Resistance	Standard	Standard / Chemical Resistance	Standard / Low Noise	Standard	Standard	Standard	Standard	Standard	Standard	Water Resistance	Water Resistance	Standard	Standard	Standard	Standard	Standard	Standard	Water Resistance	Standard	Standard	Standard	Water Resistance	Standard	Standard / Water Resistance	-	-	Standard	Standard	Standard	Standard	Standard	Water Resistance
Power Supply	-	-	-	-	-	-	-	-	-	-	Single-phase100V / Single-phase 200V	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Three-phase 200V	Single-phase100V / Three-phase 200V	Single-phase100V / Three-phase 200V	-	-	-	-	-	-	-	-	-	Three-phase 200V	Three-phase 200V	Three-phase 200V	Single-phase100V / Three-phase 200V	-	-	-	-
Short Roller Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Lining	-	Not Provided	Not Provided	Not Provided	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	Not Provided	Not Provided	Not Provided	-	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	-	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided
Lining Material	-	-	-	-	Urethane Rubber	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Lining Hardness(Shore A)	-	-	-	-	50 ～ 90	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Lining Color	-	-	-	-	Natural Color	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Bearing Material	-	-	-	Stainless Steel	-	-	Stainless Steel	Steel	-	Steel	Steel	Steel	Stainless Steel	Steel	Steel / Stainless Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Plastic	Stainless Steel	Steel	-	-	-	Steel	Steel	Plastic	Steel	Steel	Steel	Stainless Steel	Steel	Steel	Steel	Steel	-	-	Steel	Steel	Steel	Steel
Cleaning Method	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...