Flat Belt Pulleys, Idlers（Material：Plastic）

• You can add up to 6 items per a category to the compare list. Compare

  

  Pulley Idler With Flange (FIP, FIPA, FIPS, FIP-SUS)

  IMAO CORPORATION

  Pulley idler with flange usable for flat belts and timing belts. Available in plastic, aluminum, steel, and SUS.

  CAD ：

  2D / 3D

  Shape	With or w/o Flange	Outer Dia. D(Ø)	Nominal Width T(mm)	Length L(mm)	Flange Shape	Type	Material	Shaft Type	Surface Urethane	Shaft (Bore) Dia. d(mm)	Surface Treatment	Shaft Type
  Straight	No Flange	25 ～ 80	7.5 ～ 80	~50 / ~100	Standard	Idlers (Bearing Built-in)	Plastic	1-Bearing / 2-Bearing at Center / With Shaft	Urethane Not Provided	6 ～ 20	Not Provided	-

  From: ₹ 874.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Idlers for Flat Belts-Flanged Type/Crowned Type/Width L6-32

  MISUMI

  · Idlers type: Bearing Built-in.
  · Shaft Type: one Bearing and Bearing on Each End 2 pcs.
  · Type of Idlers: Flanged type and Crowned type.
  · The series code of Flanged type: HBG HBGM HBGA HBGS and HBGP.
  · The series code of Crowned type: HBGC HBGCM HBGCA and HBGCS.
  · Material Idlers body: S45C Equivalent, Aluminum Alloy, Stainless Steel SUS304 and Polyacetal.
  · Material of Bearing: Steel and Stainless Steel.
  · Outer Diameter: 15 – 50 mm
  · Width Thickness: 6 – 32 mm
  · Idlers for Stainless Steel Belts: Crowned
  

  • Volume Discount

  CAD ：

  2D / 3D

  Shape	With or w/o Flange	Outer Dia. D(Ø)	Nominal Width T(mm)	Length L(mm)	Flange Shape	Type	Material	Shaft Type	Surface Urethane	Shaft (Bore) Dia. d(mm)	Surface Treatment	Shaft Type
  Straight	Flange	25 ～ 50	11 ～ 21	~50	-	Idlers (Bearing Built-in)	Plastic	1-Bearing / 1-Bearing on Each End (2-Bearing in Total)	Urethane Not Provided	6 ～ 12	Not Provided	-

  From: ₹ 1,481.45
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VFJ Flanged Idler With Axis

  NABEYA BI-TECH

  ● Comes with nut and spring washer.
  ● Material/Finish
  · Body: Glass fiber-reinforced Nylon 66
  Bearings: steel, rubber seal
  · Nut / spring / washer: steel with trivalent chromate treatment
  · Bolt: steel
  · Collar: steel, black oxide coating (black)

  Shape	With or w/o Flange	Outer Dia. D(Ø)	Nominal Width T(mm)	Length L(mm)	Flange Shape	Type	Material	Shaft Type	Surface Urethane	Shaft (Bore) Dia. d(mm)	Surface Treatment	Shaft Type
  Straight	Flange	45 ～ 50	20 ～ 45	~50 / ~100	Standard	Idlers (Bearing Built-in)	Plastic	1-Bearing / 2-Bearing at Center / With Shaft	Urethane Not Provided	-	Not Provided	-

  From: ₹ 1,517.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VFF Engineering Plastic Flanged Idler

  NABEYA BI-TECH

  · Model: VFF
  · Idlers type: One piece bearing and Double bearing Built-in.
  · Material Idlers body: Glass fiber-reinforced Nylon 66
  · Idlers Shape : Straight type.
  · Material Bearings: steel, rubber seal.
  · Outer Diameter: 40, 45, 50, 60, 65, 70 and 75 mm.
  · Nominal width Diameter: 15, 20, 25, 30, 45, 50 and 65 mm.
  · Shaft (Bore) Diameter: 10, 12, 15, 17 and 20 mm.
  · L dimension: 50 -100 mm.
  · VFF Engineering Plastic Flanged Idler VFF types is specific idlers manufactured by NBK.
  · VFL Engineering Plastic Flat Idler

  Shape	With or w/o Flange	Outer Dia. D(Ø)	Nominal Width T(mm)	Length L(mm)	Flange Shape	Type	Material	Shaft Type	Surface Urethane	Shaft (Bore) Dia. d(mm)	Surface Treatment	Shaft Type
  Straight	Flange	40 ～ 75	15 ～ 65	~50 / ~100	Standard	Idlers (Bearing Built-in)	Plastic	1-Bearing / 2-Bearing at Center	Urethane Not Provided	10 ～ 20	Not Provided	Not Provided

  From: ₹ 808.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pulley Idler (NIP, NIPA, NIPS, NIP-SUS)

  IMAO CORPORATION

  · Pulley idler to be used for flat belts and timing belts.
  · NIP material is Glass-fiber reinforced polyamide plastic the color is Black.
  · NIPA material is A5052 Anodized finish and color is Natural.
  · NIPS material is Steel (S45C) Electroless nickel plated finish.
  · NIP-SUS material is SUS303.
  · Bearing material: steel and stainless steel.
  · Retaining Ring material: steel and stainless steel.
  · The important to note that the specific material used for pulley idlers can vary depending on the application requirements, industry standards, and manufacturer specifications.
  · Idler Crown Roller (CTR, CTRS)
  

  CAD ：

  2D / 3D

  Shape	With or w/o Flange	Outer Dia. D(Ø)	Nominal Width T(mm)	Length L(mm)	Flange Shape	Type	Material	Shaft Type	Surface Urethane	Shaft (Bore) Dia. d(mm)	Surface Treatment	Shaft Type
  Straight	No Flange	24 ～ 78	12 ～ 92	~50 / ~100	-	Idlers (Bearing Built-in)	Plastic	1-Bearing / 2-Bearing at Center / With Shaft	Urethane Not Provided	6 ～ 20	Not Provided	-

  From: ₹ 1,097.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Idler Crown Roller (CTR, CTRS)

  IMAO CORPORATION

  · Idlers type: One piece bearing and Double bearing Built-in.
  · Shape of Idlers: Crowned type.
  · CTR: material is Glass-fiber reinforced CTR polyamide plastic color black.
  · CTRS: material is Steel S45C and Steel Electroless nickel plated finish.
  · Idler body material is steel and Resin.
  · Bearing material: steel.
  · Retaining Ring material: steel.
  · Outer Diameter: 34, 43 and 48 mm.
  · Thickness Diameter: 20, 25, 35 and 49 mm.
  · The crown design helps keep the belt centered, preventing slipping and tracking issues.
  · Pulley for Flat Belts- Crowned Type/Crosspiece Groove Straight.
  

  CAD ：

  2D / 3D

  Shape	With or w/o Flange	Outer Dia. D(Ø)	Nominal Width T(mm)	Length L(mm)	Flange Shape	Type	Material	Shaft Type	Surface Urethane	Shaft (Bore) Dia. d(mm)	Surface Treatment	Shaft Type
  Crowned	No Flange	34 ～ 73	20 ～ 70	~50 / ~100	-	Idlers (Bearing Built-in)	Plastic	1-Bearing / 2-Bearing at Center / With Shaft	Urethane Not Provided	10 ～ 20	Not Provided	-

  From: ₹ 1,311.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VFL Engineering Plastic Flat Idler

  NABEYA BI-TECH

  · Model: VFL
  · Idlers type: One piece bearing and Double bearing Built-in.
  · Material Idlers body: Glass fiber-reinforced Nylon 66
  · idlers Shape : Straight type.
  · Material Bearings: steel, rubber seal.
  · Outer Diameter: 50 and 70 mm.
  · Nominal width Diameter: 30 and 55 mm.
  · Shaft hole Diameter: 12 and 15 mm.
  · L dimension: 50 -100 mm.
  · Material: Nylon 66, also known as polyamide 66, is a type of engineering plastic known for its high strength, toughness, and wear resistance.
  · Economy Pulleys for Flat Belts with Urethane-Crowned/Crosspiece Groove Straight
  

  Shape	With or w/o Flange	Outer Dia. D(Ø)	Nominal Width T(mm)	Length L(mm)	Flange Shape	Type	Material	Shaft Type	Surface Urethane	Shaft (Bore) Dia. d(mm)	Surface Treatment	Shaft Type
  Straight	No Flange	50 ～ 70	-	~50 / ~100	-	Idlers (Bearing Built-in)	Plastic	1-Bearing / 2-Bearing at Center	Urethane Not Provided	12 ～ 15	Not Provided	Not Provided

  From: ₹ 957.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MC Nylon Flat Idler MCF

  KONISHI

  · Model code: MCF-55
  · Brand: KONISHI MFG (MIYOSHI)
  · Idlers type: Bearing Built-in.
  · Shape of Idlers: Straight type.
  · Material Idlers body: MC Nylon MC901
  · Shaft Type : Bearing on Each End (2-Bearing in Total)
  · Material (Bearing): Bearing steel 6004ZZ.
  · Body Color: Blue
  · Outer Diameter: 64 mm.
  · Hole diameter: 20 mm.
  · Width size: 55 mm.
  · Length: 100 mm.
  · MC Nylon is a type of engineering plastic known for its excellent mechanical properties, including high strength, impact resistance, and wear resistance.
  · Idlers for Flat Belts-Width L100-300 mm.
  

  CAD ：

  2D

  Shape	With or w/o Flange	Outer Dia. D(Ø)	Nominal Width T(mm)	Length L(mm)	Flange Shape	Type	Material	Shaft Type	Surface Urethane	Shaft (Bore) Dia. d(mm)	Surface Treatment	Shaft Type
  Straight	No Flange	64	55	~100	-	Idlers (Bearing Built-in)	Plastic	1-Bearing on Each End (2-Bearing in Total)	Urethane Not Provided	20	Not Provided	-

  From: ₹ 4,901.25
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Shape
With or w/o Flange
Outer Dia. D(Ø)
Nominal Width T(mm)
Length L(mm)
Flange Shape
Type
Material
Shaft Type
Surface Urethane
Shaft (Bore) Dia. d(mm)
Surface Treatment
Shaft Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	IMAO CORPORATION	MISUMI	NABEYA BI-TECH	NABEYA BI-TECH	IMAO CORPORATION	IMAO CORPORATION	NABEYA BI-TECH	KONISHI
Product Series	Pulley Idler With Flange (FIP, FIPA, FIPS, FIP-SUS)	Idlers for Flat Belts-Flanged Type/Crowned Type/Width L6-32	VFJ Flanged Idler With Axis	VFF Engineering Plastic Flanged Idler	Pulley Idler (NIP, NIPA, NIPS, NIP-SUS)	Idler Crown Roller (CTR, CTRS)	VFL Engineering Plastic Flat Idler	MC Nylon Flat Idler MCF
CAD	2D / 3D	2D / 3D			2D / 3D	2D / 3D		2D
From	₹ 874.16	₹ 1,481.45	₹ 1,517.49	₹ 808.38	₹ 1,097.85	₹ 1,311.56	₹ 957.16	₹ 4,901.25
Days to Ship	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more
Shape	Straight	Straight	Straight	Straight	Straight	Crowned	Straight	Straight
With or w/o Flange	No Flange	Flange	Flange	Flange	No Flange	No Flange	No Flange	No Flange
Outer Dia. D(Ø)	25 ～ 80	25 ～ 50	45 ～ 50	40 ～ 75	24 ～ 78	34 ～ 73	50 ～ 70	64
Nominal Width T(mm)	7.5 ～ 80	11 ～ 21	20 ～ 45	15 ～ 65	12 ～ 92	20 ～ 70	-	55
Length L(mm)	~50 / ~100	~50	~50 / ~100	~50 / ~100	~50 / ~100	~50 / ~100	~50 / ~100	~100
Flange Shape	Standard	-	Standard	Standard	-	-	-	-
Type	Idlers (Bearing Built-in)	Idlers (Bearing Built-in)	Idlers (Bearing Built-in)	Idlers (Bearing Built-in)	Idlers (Bearing Built-in)	Idlers (Bearing Built-in)	Idlers (Bearing Built-in)	Idlers (Bearing Built-in)
Material	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic
Shaft Type	1-Bearing / 2-Bearing at Center / With Shaft	1-Bearing / 1-Bearing on Each End (2-Bearing in Total)	1-Bearing / 2-Bearing at Center / With Shaft	1-Bearing / 2-Bearing at Center	1-Bearing / 2-Bearing at Center / With Shaft	1-Bearing / 2-Bearing at Center / With Shaft	1-Bearing / 2-Bearing at Center	1-Bearing on Each End (2-Bearing in Total)
Surface Urethane	Urethane Not Provided	Urethane Not Provided	Urethane Not Provided	Urethane Not Provided	Urethane Not Provided	Urethane Not Provided	Urethane Not Provided	Urethane Not Provided
Shaft (Bore) Dia. d(mm)	6 ～ 20	6 ～ 12	-	10 ～ 20	6 ～ 20	10 ～ 20	12 ～ 15	20
Surface Treatment	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided
Shaft Type	-	-	-	Not Provided	-	-	Not Provided	-

Loading...