Universal Joints（Type：Shaft Type）

• You can add up to 6 items per a category to the compare list. Compare

  

  Join Slide SPS Series

  MIYOSHI KIKAI

  SPS (spline shaft), SPA / SPO (spline sleeve) is made of: S-45C material. Use on the sliding part during rotation.

  CAD ：

  2D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  5 ～ 38	-	-	5 ～ 35	-	-	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: ₹ 1,874.40
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Bearing K-GX Type of Hexagonal Shaft Joint

  MIYOSHI KIKAI

  [Features]
  · Comprises 2 standard joints and joint slide (GXS, GXA).
  · Joint and join slide are set with spring pin.
  · When shaft machining (keyway, tapping hole, etc.), after making the mating mark, remove the spring pin, and release the joint and joint slide.
  · After machining, be sure to set back to the original position according to mating mark. (HJ-GX uses a joint pin instead of a spring pin.)
  · When setting, please ensure symmetry of left / right joint assembly E yoke and F yoke.
  · Please note, if set incorrectly, output wheel speed will become uneven.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  10 ～ 30	-	-	20 ～ 60	194~309 ～ 546~711	-	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: ₹ 34,527.20
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Shaft Type, Bearing Type, KL Type, KF Type, KFD Type

  MIYOSHI KIKAI

  [Features]·Universal joint for light torque and high speed. ·Flange is not included.

  CAD ：

  2D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  -	-	-	36 ～ 118	72 ～ 326	-	Standard	Shaft Type	-	-	-	-	-	-	-

  From: ₹ 15,133.82
  Days to Ship: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shaft Type Joint With Hex Shaft, Wear-Resistant HJ-GX Model

  MIYOSHI KIKAI

  [Features]
  ·Joints with hexagonal shafts and intermediate shafts can be cut freely
  ·Expansion / contraction range is large for broad range of installations.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12 ～ 51	105~232 ～ 399~599	-	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: ₹ 16,742.00
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Type with shaft, joint with hexagonal shaft, precision type, S-GX type

  MIYOSHI KIKAI

  [Features]
  ·You can freely cut any part of the joint with a hexagonal shaft and the intermediate shaft.
  ·The amount of expansion and contraction is large and the mounting range is wide.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  8 ～ 30	-	-	18 ～ 58	132~245 ～ 397~599	High Accuracy ～ Small	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: ₹ 21,813.36
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Joint Slide SPSS Series

  MIYOSHI KIKAI

  SPSS (spline shaft), SPAS / SPOS (spline sleeve) is made of: S-45C material.
  
  [Features]
  · Please note the effective spline size for sleeve and shaft cutting.
  · Use on the sliding part during rotation.

  CAD ：

  2D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 25	-	-	6 ～ 22	-	-	Standard	Shaft Type	-	Stainless Steel	-	-	-	-	-

  From: ₹ 5,604.00
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Reinforced B-GX Type of Hexagonal Shaft Joint

  MIYOSHI KIKAI

  [Features]
  · Shaft can be freely cut at any point.
  · Expansion / contraction range is large for broad range of installations.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12 ～ 60	162~270 ～ 553~711	High Torque	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: ₹ 13,963.24
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shaft type spline, shaft joint, precise type H-P

  MIYOSHI KIKAI

  Please refer to P.6 "Requests for Ordering" in the catalog before placing an order. Please refer to "Joint Boots" on pages 24-25 of the catalog.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12.5 ～ 57	148.5~252 ～ 530~1164	High Accuracy ～ High Durability	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: ₹ 14,482.75
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Wheel attached type spline wheel attached joint strong type B-P type

  MIYOSHI KIKAI

  [Features]
  ·Joints with hexagonal shafts and intermediate shafts can be cut freely
  ·Expansion / contraction range is large for broad range of installations.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12 ～ 60	168.5~266.5 ～ 556~1185	High Torque	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: ₹ 11,024.82
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shaft attached type Joint with spline shaft Bearing type K-P model

  MIYOSHI KIKAI

  Miyoshi Kikai universal joint shaft type spline shaft joint bearing type KP type.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  10 ～ 30	-	-	20 ～ 60	219~450 ～ 556~1188.5	-	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: ₹ 32,854.16
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Joint Power Type With Spline Shaft B-PS Series

  MIYOSHI KIKAI

  [Features]
  · P series are short-lead, easy order type.
  · Comprising of 2 standard joints (SPS, and join slide SPA).
  · In the case of the standard product, since the joint and the join slide are not set on delivery, once the full length dimension is decided, use the spring pin provided to set for use (HJ-P uses joint pin instead of spring pin ).
  · When setting, please ensure symmetry of left / right joint assembly.
  · Please note, if set incorrectly, output shaft speed will become uneven.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  20 ～ 60	-	-	40 ～ 120	324~806 ～ 760~1312	High Torque	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: ₹ 35,686.29
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Join Slide GX Series

  MIYOSHI KIKAI

  GXS(Hex sanding shaft) is made of S-45C. GXA/GXO (Hex hole sleeve) is made of: STKM-13. Hex shaft / Sleeve can be cut at any position.
  
  [Features]
  · The hex shaft and sleeve can be cut at any position.
  · Cannot be used in sliding part while rotating.
  · When using as a slide unit, the NX slide unit should also be considered.

  CAD ：

  2D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	11 ～ 54	-	-	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: ₹ 1,909.82
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Type with shaft, joint with hexagonal shaft, precision type, H-GX type

  MIYOSHI KIKAI

  The amount of expansion and contraction that can be freely cut at any part of the intermediate shaft is large, and the mounting range is wide.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12.5 ～ 57	131~250 ～ 517~685	High Accuracy ～ High Durability	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: ₹ 18,483.27
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  With Shaft Model Joints with Spline Shaft Accurate Model S-P Model

  MIYOSHI KIKAI

  [Features]
  ·You can freely cut any part of the joint with a hexagonal shaft and the intermediate shaft.
  ·The amount of expansion and contraction is large and the mounting range is wide.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	16 ～ 58	136.5~244 ～ 444~1095	High Accuracy ～ Small	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: ₹ 15,495.75
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  With Shaft Model Joints with Spline Shaft Abrasion Resistant Model HJ-P Model

  MIYOSHI KIKAI

  [Features]·Rotation and sliding can be transmitted simultaneously. [Materials]·SCM415.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12 ～ 51	130.5~238 ～ 444~1094	-	Standard	Shaft Type	-	Steel	-	-	-	-	-

  From: ₹ 12,496.42
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shaft type spline, shaft type joint, stainless type HS-P

  MIYOSHI KIKAI

  [Features]·Rotation and sliding can be transmitted simultaneously. [Materials]·SUS304.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 20	-	-	12.5 ～ 40	148.5~252 ～ 335~842	-	Standard	Shaft Type	-	Stainless Steel	-	-	-	-	-

  From: ₹ 28,013.22
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Shaft Bore Dia. (machined) D1(Ø)
Allowable Torque Range(N•m)
Shaft Bore Dia. (machined) D2(Ø)
Outer Dia. A(Ø)
Overall Length W(mm)
Features
Application
Type
Max. Rotational Speed Range(r/min)
Body Material
Allowable Torque(N•m)
Max. Rotational Speed(r/min)
Allowable Lateral Misalignment Range(mm)
Allowable Lateral Misalignment(mm)
Allowable Angular Misalignment(deg)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI
Product Series	Join Slide SPS Series	Bearing K-GX Type of Hexagonal Shaft Joint	Shaft Type, Bearing Type, KL Type, KF Type, KFD Type	Shaft Type Joint With Hex Shaft, Wear-Resistant HJ-GX Model	Type with shaft, joint with hexagonal shaft, precision type, S-GX type	Joint Slide SPSS Series	Reinforced B-GX Type of Hexagonal Shaft Joint	Shaft type spline, shaft joint, precise type H-P	Wheel attached type spline wheel attached joint strong type B-P type	Shaft attached type Joint with spline shaft Bearing type K-P model	Joint Power Type With Spline Shaft B-PS Series	Join Slide GX Series	Type with shaft, joint with hexagonal shaft, precision type, H-GX type	With Shaft Model Joints with Spline Shaft Accurate Model S-P Model	With Shaft Model Joints with Spline Shaft Abrasion Resistant Model HJ-P Model	Shaft type spline, shaft type joint, stainless type HS-P
CAD	2D		2D			2D						2D
From	₹ 1,874.40	₹ 34,527.20	₹ 15,133.82	₹ 16,742.00	₹ 21,813.36	₹ 5,604.00	₹ 13,963.24	₹ 14,482.75	₹ 11,024.82	₹ 32,854.16	₹ 35,686.29	₹ 1,909.82	₹ 18,483.27	₹ 15,495.75	₹ 12,496.42	₹ 28,013.22
Days to Ship	8 Day(s) or more	11 Day(s) or more	12 Day(s) or more	8 Day(s) or more	11 Day(s) or more	8 Day(s) or more	11 Day(s) or more	11 Day(s) or more	11 Day(s) or more	11 Day(s) or more	11 Day(s) or more	8 Day(s) or more	11 Day(s) or more	11 Day(s) or more	11 Day(s) or more	11 Day(s) or more
Shaft Bore Dia. (machined) D1(Ø)	5 ～ 38	10 ～ 30	-	6 ～ 30	8 ～ 30	6 ～ 25	6 ～ 30	6 ～ 30	6 ～ 30	10 ～ 30	20 ～ 60	6 ～ 30	6 ～ 30	6 ～ 30	6 ～ 30	6 ～ 20
Allowable Torque Range(N•m)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Shaft Bore Dia. (machined) D2(Ø)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Outer Dia. A(Ø)	5 ～ 35	20 ～ 60	36 ～ 118	12 ～ 51	18 ～ 58	6 ～ 22	12 ～ 60	12.5 ～ 57	12 ～ 60	20 ～ 60	40 ～ 120	11 ～ 54	12.5 ～ 57	16 ～ 58	12 ～ 51	12.5 ～ 40
Overall Length W(mm)	-	194~309 ～ 546~711	72 ～ 326	105~232 ～ 399~599	132~245 ～ 397~599	-	162~270 ～ 553~711	148.5~252 ～ 530~1164	168.5~266.5 ～ 556~1185	219~450 ～ 556~1188.5	324~806 ～ 760~1312	-	131~250 ～ 517~685	136.5~244 ～ 444~1095	130.5~238 ～ 444~1094	148.5~252 ～ 335~842
Features	-	-	-	-	High Accuracy ～ Small	-	High Torque	High Accuracy ～ High Durability	High Torque	-	High Torque	-	High Accuracy ～ High Durability	High Accuracy ～ Small	-	-
Application	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard
Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type
Max. Rotational Speed Range(r/min)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Body Material	Steel	Steel	-	Steel	Steel	Stainless Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Stainless Steel
Allowable Torque(N•m)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Max. Rotational Speed(r/min)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Allowable Lateral Misalignment Range(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Allowable Lateral Misalignment(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Allowable Angular Misalignment(deg)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...