Universal Joints（Type：Standard Type）

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Universal Joints - Set Pin

  MISUMI

  [Features]·This is a coupling that allows the joining angle to be changed freely.

  • Volume Discount

  CAD ：

  2D / 3D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	5.01~10.00 ～ 100 < 500	-	12 ～ 51	31 ～ 139	-	Standard	Standard Type	-	Steel	5.3 ～ 495	-	-	-	-

  From: ₹ 1,285.68
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Universal Joints - Set Keyway / Tapped

  MISUMI

  [Features]No pin hole machining is required on the shaft, but only keyway machining is required to tighten.

  • Volume Discount

  CAD ：

  2D / 3D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  10 ～ 20	20.01~50.00 ～ 50.01~100.00	-	19 ～ 36	42 ～ 139	-	Standard	Standard Type	-	Steel	20.1 ～ 175	-	-	-	-

  From: ₹ 2,999.92
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Paraflex CPE· CPU Model

  MIKI PULLEY

  High rigidity with high precision pin and dry metal to minimize backlash.
  
  [Features]
  · The rigidity of each component is very high, and backlash extremely small due to high precision pin and dry metal.
  · As it is universal type, the shaft reaction force due to installation error is extremely small.
  · With damping effect due to sliding friction surface of pin and dry metal.

  CAD ：

  2D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  3 ～ 22	0.05~1.00 ～ 20.01~50.00	3 ～ 22	19 ～ 46	19.4 ～ 54	High Accuracy ～ Small	Standard / Servo Motor / Stepping Motor	Standard Type	2001~4000 ～ 4001~10000	Aluminum	0.4 ～ 25	3000 ～ 6000	0.02~0.2 ～ 0.41~1.0	0.2 ～ 0.5	1 ～ 4

  From: ₹ 4,248.89
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type Wear-Resistant HJ Series

  MIYOSHI KIKAI

  [Features]
  · With total hardening treatment for increased fatigue strength.
  · Additional machining cannot be performed on the hardened product.
  · To extend life, boots and oil pack should be used.
  · When shaft hole is T-shaped, please indicate new JIS key, or previous JIS key.
  · With key groove processing, the strong pins and joint pins are not included.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12 ～ 51	31 ～ 122	-	Standard	Standard Type	301~1000 ～ 1001~2000	Steel	-	500 ～ 1800	-	-	-

  From: ₹ 2,984.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type Corrosion Resistant HS Series/BS Series/HSS Series

  MIYOSHI KIKAI

  [Features]
  · Dry lubrication treatment for wear resistance (HS-16 and higher)
  · Holes for the spring pins and taper pins included can be machined in the l/2 position simultaneously with the shaft.
  · When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.
  · With key groove processing, spring pin is not attached.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 60	-	-	12.5 ～ 120	40 ～ 300	-	Standard	Standard Type	< 100 ～ 301~1000	Stainless Steel	-	90 ～ 800	-	-	-

  From: ₹ 4,085.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Universal Joint Coupling - Clamping Long Type -

  SUNGIL

  Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. A Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection, and short lead-times.

  CAD ：

  2D / 3D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  3 ～ 15	0.05~1.00 ～ 3.01~5.00	3 ～ 15	15 ～ 40	24.2 ～ 51	Heat Resistant ～ Small	Servo Motor	Standard Type	2001~4000 ～ 10001~78000	Aluminum ～ Aluminum Alloy	0.25 ～ 5	3500 ～ 18000	0.21~0.40	0.3 ～ 0.5	7

  From: ₹ 2,943.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cross Joint Coupling (SCJ Series)

  SUNGIL

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  3 ～ 15	0.05~1.00 ～ 3.01~5.00	3 ～ 15	15 ～ 40	22.4 ～ 51	Heat Resistant ～ Small	Servo Motor	Standard Type	2001~4000 ～ 10001~78000	Aluminum ～ Aluminum Alloy	0.25 ～ 5	3500 ～ 21000	0.21~0.40 ～ 0.41~1.0	0.3 ～ 0.5	3 ～ 7

  From: ₹ 2,384.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type, Strong Type BD Series

  MIYOSHI KIKAI

  [Features]
  · High torque normal use.
  · Material: S45C
  · Holes for the spring pins included can be machined in the l/2 position simultaneously with the shaft.
  · To extend life, boots and oil pack should be used.
  · When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.
  · With key groove processing, spring pin is not included.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 60	-	-	12 ～ 120	75 ～ 485	High Torque	Standard	Standard Type	100~ 300 ～ 1001~2000	Steel	-	160 ～ 1300	-	-	-

  From: ₹ 4,400.09
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Universal Joint Coupling -Set Screw Type- [SCJ]

  SUNGIL

  Clamping type product suitable for use in cases where shaft and shaft are located away from each other, or when the angle of the shaft is great. SUNGIL Inc. is a Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection, and short lead-times.

  CAD ：

  2D / 3D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  3 ～ 15	0.05~1.00 ～ 3.01~5.00	3 ～ 15	15 ～ 40	22.4 ～ 45.6	Heat Resistant ～ Small	Servo Motor	Standard Type	2001~4000 ～ 10001~78000	Aluminum ～ Aluminum Alloy	0.25 ～ 5	4000 ～ 21000	0.21~0.40 ～ 0.41~1.0	0.3 ～ 0.5	3

  From: ₹ 2,384.85
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type, Power Type B Series

  MIYOSHI KIKAI

  [Features]
  · Holes for spring pins included can be machined in the l/2 position simultaneously with the shaft.
  · To extend life, boots and oil pack should be used.
  · When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.
  · With key groove processing, the spring pins are not included.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 60	-	-	12 ～ 120	50 ～ 300	High Torque	Standard	Standard Type	100~ 300 ～ 1001~2000	Steel	-	220 ～ 1700	-	-	-

  From: ₹ 2,264.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  

  

  

  Standard Type, Precision Type H Series

  MIYOSHI KIKAI

  [Features]
  ·The pin is dry lubricated to improve abrasion resistance.
  ·Please use boots and oil packs to extend the life of the joints.
  ·For B or T, please specify the new JIS key or the old JIS key.
  ·With keyway processing, spring pin is not included.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12.5 ～ 57	40 ～ 165	High Accuracy ～ High Durability	Standard	Standard Type	301~1000 ～ 1001~2000	Steel	-	510 ～ 2000	-	-	-

  From: ₹ 3,977.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type Wear-Resistant HJD Type

  MIYOSHI KIKAI

  [Features]
  · With total hardening treatment for increased fatigue strength.
  · Additional machining cannot be performed on the hardened product.
  · When shaft hole is T-shaped, please indicate new JIS key, or previous JIS key.
  · With key groove processing, the strong pins and joint pins are not included.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12 ～ 51	49.5 ～ 195	-	Standard	Standard Type	301~1000 ～ 1001~2000	Steel	-	380 ～ 1400	-	-	-

  From: ₹ 5,385.00
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Shaft Fitting, Correctable, UA-C Series

  SAKAI MANUFACTURING

  Ideal for high precision and highly responsive control.
  
  [Features]
  · With high performance and double bolt clamp specification, suitable for high precision, highly responsive control.

  CAD ：

  2D / 3D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  3 ～ 20	0.05~1.00 ～ 10.01~20.00	3 ～ 20	15 ～ 55	18 ～ 58	High Torsional Rigidity ～ Low Moment of Inertia	Standard / Servo Motor / Stepping Motor / Encoder	Standard Type	4001~10000	Aluminum	0.25 ～ 20	6000	0.02~0.2	0.2	1

  From: ₹ 3,205.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Large plastic universal joint MD series

  MIGHTY

  [Features]
  ·Zero backlash
  ·Electrical insulation, non-magnetic
  ·Oil free
  ·Resistant to pushing and pulling
  ·Light weight, low inertia
  [Applications]
  ·Control systems, push-pull transmission mechanisms, audio equipment, audio-visual equipment, textile machinery, instrumentation equipment, environmental equipment, equipment for outdoor use

  CAD ：

  2D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  8 ～ 20	1.01~3.00 ～ 10.01~20.00	8 ～ 20	23 ～ 36.5	62 ～ 86	High Accuracy ～ Small	Standard / Servo Motor / Stepping Motor / Encoder	Standard Type	-	Plastic	2.8 ～ 10.7	-	-	-	40

  From: ₹ 4,891.82
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type Precision S Model

  MIYOSHI KIKAI

  Holes for the spring pins included can be machined in the l/2 position simultaneously with the shaft.
  · To extend life, boots and oil pack should be used.
  · When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.
  · With key groove processing, the spring pins are not included.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 60	-	-	16 ～ 115	34 ～ 220	High Accuracy ～ Small	Standard	Standard Type	100~ 300 ～ 2001~4000	Steel	-	280 ～ 2100	-	-	-

  From: ₹ 4,479.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Plastic Universal Joint, MC Series

  MIGHTY

  [Features]
  ·Zero backlash
  ·Angle absorption of 45 degrees for single and 90 degrees for double
  ·Electrical insulation, non-magnetic
  ·Lightweight and does not require lubrication
  ·Excellent durability and chemical resistance
  [Applications]
  ·Computers and Peripherals, Instrumentation Equipment, Controllers, Control Systems
  ·Information equipment, communication equipment, switching systems
  ·audio equipment, audiovisual equipment
  ·Office equipment, copiers, medical equipment, precision equipment, printing machines, textile machines, vending machines
  ·Air conditioners, environmental equipment, educational models, leisure models, etc.

  CAD ：

  2D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  3 ～ 10	0.05~1.00 ～ 1.01~3.00	3 ～ 10	7.1 ～ 17.5	19.1 ～ 75.5	High Accuracy ～ No Backlash	Standard / Servo Motor / Stepping Motor / Encoder	Standard Type	4001~10000	Plastic	0.08 ～ 1.6	10000	5.1~100	5.6 ～ 15.5	45 ～ 90

  From: ₹ 1,091.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Plastic / Universal / Joint MCM Series

  MIGHTY

  [Features]
  ·Zero backlash
  ·Angle absorption of 45 degrees for single and 90 degrees for double
  ·Electrical insulation, non-magnetic
  ·Lightweight and does not require lubrication
  ·Excellent durability and chemical resistance
  [Applications]
  ·Computers and Peripherals, Instrumentation Equipment, Controllers, Control Systems
  ·Information equipment, communication equipment, switching systems
  ·audio equipment, audiovisual equipment
  ·Office equipment, copiers, medical equipment, precision equipment, printing machines, textile machines, vending machines
  ·Air conditioners, environmental equipment, educational models, leisure models, etc.

  CAD ：

  2D

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  2 ～ 10	0.05~1.00 ～ 1.01~3.00	2 ～ 10	7.1 ～ 17.5	27.2 ～ 89.8	High Accuracy ～ No Backlash	Standard / Servo Motor / Stepping Motor / Encoder	Standard Type	4001~10000	Plastic	0.08 ～ 1.6	10000	5.1~100	5.6 ～ 15.5	45 ～ 90

  From: ₹ 3,313.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Bearing Model, K Model

  MIYOSHI KIKAI

  [Features]
  ·Grease-filled needle bearings are used, making them suitable for high-speed rotation.
  ·The attached spring pin hole should be machined at the same time as the shaft at the l/2 position.
  ·K-20 and above have a grease nipple.
  ·When using boots, please use type B or type H.
  ·If the shaft hole shape is B or T, please specify the new JIS key or the old JIS key.
  ·With keyway processing, the spring pins are not included.
  [Applications]
  ·For high speed rotation.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  10 ～ 30	-	-	20 ～ 60	62 ～ 178	-	Standard	Standard Type	301~1000 ～ 2001~4000	Steel	-	950 ～ 2500	-	-	-

  From: ₹ 9,923.38
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Corrosion Resistant Type HSD/BSD

  MIYOSHI KIKAI

  [Features]
  · Dry lubrication treatment for wear resistance (HSD-16 and higher)
  · Holes for the spring pins and taper pins included can be machined in the l/2 position simultaneously with the shaft.
  · When the shaft shape is B or T, please indicate new JIS key, or previous JIS key.
  · With key groove processing, spring pin is not included.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 30	-	-	12.5 ～ 60	65 ～ 275	-	Standard	Standard Type	100~ 300 ～ 301~1000	Stainless Steel	-	150 ～ 640	-	-	-

  From: ₹ 7,956.42
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Miniature Model MM Model

  MIYOSHI KIKAI

  High precision for ultra-small diameter use. 3 types of material available: SK-4 with nitriding composite treatment, SUS304 & SUS316.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  1 ～ 1.5	-	-	2 ～ 3	9 ～ 12	Small	Standard	Standard Type	-	Stainless Steel ～ Steel	-	-	-	-	-

  From: ₹ 4,708.13
  Days to Ship: 18 Day(s) or more

  18 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Precision Type D Model

  MIYOSHI KIKAI

  [Features]
  · Spring pins included can be machined in the l/2 position simultaneously with the shaft.
  · To extend life, boots and oil pack should be used.
  · When the shaft shape is B or T, please indicate new JIS key, or previous JIS key.
  · With key groove processing, spring pin is not included.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6 ～ 60	-	-	16 ～ 115	50 ～ 340	High Accuracy ～ Small	Standard	Standard Type	100~ 300 ～ 1001~2000	Steel	-	200 ～ 1500	-	-	-

  From: ₹ 12,548.00
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Miniature Model, M Model

  MIYOSHI KIKAI

  High precision for small diameter use. In order to improve wear resistance, has been treated with S45C nitride composite processing.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  2 ～ 5.5	-	-	6 ～ 10	15 ～ 30	Small	Standard	Standard Type	301~1000	Steel	-	700 ～ 1000	-	-	-

  From: ₹ 3,221.02
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Bearing Model, KD Model

  MIYOSHI KIKAI

  [Features]
  ·Uses grease-encapsulated needle bearings, making it suitable for high-speed rotation.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  10 ～ 30	-	-	20 ～ 60	96 ～ 275	-	Standard	Standard Type	301~1000 ～ 2001~4000	Steel	-	730 ～ 2200	-	-	-

  From: ₹ 25,137.16
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Type, Non Magnetic Corrosion Resistant Type - BR Type

  MIYOSHI KIKAI

  This product is non-magnetic and has excellent corrosion resistance. [Materials]·Bronze BC6.

  Shaft Bore Dia. (machined) D1(Ø)	Allowable Torque Range(N•m)	Shaft Bore Dia. (machined) D2(Ø)	Outer Dia. A(Ø)	Overall Length W(mm)	Features	Application	Type	Max. Rotational Speed Range(r/min)	Body Material	Allowable Torque(N•m)	Max. Rotational Speed(r/min)	Allowable Lateral Misalignment Range(mm)	Allowable Lateral Misalignment(mm)	Allowable Angular Misalignment(deg)
  6	-	-	16	40	-	Standard	Standard Type	-	Alloy	-	-	-	-	-

  From: ₹ 5,063.09
  Days to Ship: 18 Day(s) or more

  18 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Shaft Bore Dia. (machined) D1(Ø)
Allowable Torque Range(N•m)
Shaft Bore Dia. (machined) D2(Ø)
Outer Dia. A(Ø)
Overall Length W(mm)
Features
Application
Type
Max. Rotational Speed Range(r/min)
Body Material
Allowable Torque(N•m)
Max. Rotational Speed(r/min)
Allowable Lateral Misalignment Range(mm)
Allowable Lateral Misalignment(mm)
Allowable Angular Misalignment(deg)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	MISUMI	MIKI PULLEY	MIYOSHI KIKAI	MIYOSHI KIKAI	SUNGIL	SUNGIL	MIYOSHI KIKAI	SUNGIL	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	SAKAI MANUFACTURING	MIGHTY	MIYOSHI KIKAI	MIGHTY	MIGHTY	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI
Product Series	Universal Joints - Set Pin	Universal Joints - Set Keyway / Tapped	Paraflex CPE· CPU Model	Standard Type Wear-Resistant HJ Series	Standard Type Corrosion Resistant HS Series/BS Series/HSS Series	Universal Joint Coupling - Clamping Long Type -	Cross Joint Coupling (SCJ Series)	Standard Type, Strong Type BD Series	Universal Joint Coupling -Set Screw Type- [SCJ]	Standard Type, Power Type B Series	Standard Type, Precision Type H Series	Standard Type Wear-Resistant HJD Type	Precision Shaft Fitting, Correctable, UA-C Series	Large plastic universal joint MD series	Standard Type Precision S Model	Plastic Universal Joint, MC Series	Plastic / Universal / Joint MCM Series	Standard Bearing Model, K Model	Standard Corrosion Resistant Type HSD/BSD	Standard Miniature Model MM Model	Standard Precision Type D Model	Standard Miniature Model, M Model	Standard Bearing Model, KD Model	Standard Type, Non Magnetic Corrosion Resistant Type - BR Type
CAD	2D / 3D	2D / 3D	2D			2D / 3D			2D / 3D				2D / 3D	2D		2D	2D
From	₹ 1,285.68	₹ 2,999.92	₹ 4,248.89	₹ 2,984.80	₹ 4,085.78	₹ 2,943.75	₹ 2,384.85	₹ 4,400.09	₹ 2,384.85	₹ 2,264.20	₹ 3,977.29	₹ 5,385.00	₹ 3,205.53	₹ 4,891.82	₹ 4,479.35	₹ 1,091.29	₹ 3,313.05	₹ 9,923.38	₹ 7,956.42	₹ 4,708.13	₹ 12,548.00	₹ 3,221.02	₹ 25,137.16	₹ 5,063.09
Days to Ship	Same day or more	Same day or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	8 Day(s) or more	8 Day(s) or more	5 Day(s) or more	5 Day(s) or more	8 Day(s) or more	5 Day(s) or more	9 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	8 Day(s) or more	8 Day(s) or more	18 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	18 Day(s) or more
Shaft Bore Dia. (machined) D1(Ø)	6 ～ 30	10 ～ 20	3 ～ 22	6 ～ 30	6 ～ 60	3 ～ 15	3 ～ 15	6 ～ 60	3 ～ 15	6 ～ 60	6 ～ 30	6 ～ 30	3 ～ 20	8 ～ 20	6 ～ 60	3 ～ 10	2 ～ 10	10 ～ 30	6 ～ 30	1 ～ 1.5	6 ～ 60	2 ～ 5.5	10 ～ 30	6
Allowable Torque Range(N•m)	5.01~10.00 ～ 100 < 500	20.01~50.00 ～ 50.01~100.00	0.05~1.00 ～ 20.01~50.00	-	-	0.05~1.00 ～ 3.01~5.00	0.05~1.00 ～ 3.01~5.00	-	0.05~1.00 ～ 3.01~5.00	-	-	-	0.05~1.00 ～ 10.01~20.00	1.01~3.00 ～ 10.01~20.00	-	0.05~1.00 ～ 1.01~3.00	0.05~1.00 ～ 1.01~3.00	-	-	-	-	-	-	-
Shaft Bore Dia. (machined) D2(Ø)	-	-	3 ～ 22	-	-	3 ～ 15	3 ～ 15	-	3 ～ 15	-	-	-	3 ～ 20	8 ～ 20	-	3 ～ 10	2 ～ 10	-	-	-	-	-	-	-
Outer Dia. A(Ø)	12 ～ 51	19 ～ 36	19 ～ 46	12 ～ 51	12.5 ～ 120	15 ～ 40	15 ～ 40	12 ～ 120	15 ～ 40	12 ～ 120	12.5 ～ 57	12 ～ 51	15 ～ 55	23 ～ 36.5	16 ～ 115	7.1 ～ 17.5	7.1 ～ 17.5	20 ～ 60	12.5 ～ 60	2 ～ 3	16 ～ 115	6 ～ 10	20 ～ 60	16
Overall Length W(mm)	31 ～ 139	42 ～ 139	19.4 ～ 54	31 ～ 122	40 ～ 300	24.2 ～ 51	22.4 ～ 51	75 ～ 485	22.4 ～ 45.6	50 ～ 300	40 ～ 165	49.5 ～ 195	18 ～ 58	62 ～ 86	34 ～ 220	19.1 ～ 75.5	27.2 ～ 89.8	62 ～ 178	65 ～ 275	9 ～ 12	50 ～ 340	15 ～ 30	96 ～ 275	40
Features	-	-	High Accuracy ～ Small	-	-	Heat Resistant ～ Small	Heat Resistant ～ Small	High Torque	Heat Resistant ～ Small	High Torque	High Accuracy ～ High Durability	-	High Torsional Rigidity ～ Low Moment of Inertia	High Accuracy ～ Small	High Accuracy ～ Small	High Accuracy ～ No Backlash	High Accuracy ～ No Backlash	-	-	Small	High Accuracy ～ Small	Small	-	-
Application	Standard	Standard	Standard / Servo Motor / Stepping Motor	Standard	Standard	Servo Motor	Servo Motor	Standard	Servo Motor	Standard	Standard	Standard	Standard / Servo Motor / Stepping Motor / Encoder	Standard / Servo Motor / Stepping Motor / Encoder	Standard	Standard / Servo Motor / Stepping Motor / Encoder	Standard / Servo Motor / Stepping Motor / Encoder	Standard	Standard	Standard	Standard	Standard	Standard	Standard
Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type
Max. Rotational Speed Range(r/min)	-	-	2001~4000 ～ 4001~10000	301~1000 ～ 1001~2000	< 100 ～ 301~1000	2001~4000 ～ 10001~78000	2001~4000 ～ 10001~78000	100~ 300 ～ 1001~2000	2001~4000 ～ 10001~78000	100~ 300 ～ 1001~2000	301~1000 ～ 1001~2000	301~1000 ～ 1001~2000	4001~10000	-	100~ 300 ～ 2001~4000	4001~10000	4001~10000	301~1000 ～ 2001~4000	100~ 300 ～ 301~1000	-	100~ 300 ～ 1001~2000	301~1000	301~1000 ～ 2001~4000	-
Body Material	Steel	Steel	Aluminum	Steel	Stainless Steel	Aluminum ～ Aluminum Alloy	Aluminum ～ Aluminum Alloy	Steel	Aluminum ～ Aluminum Alloy	Steel	Steel	Steel	Aluminum	Plastic	Steel	Plastic	Plastic	Steel	Stainless Steel	Stainless Steel ～ Steel	Steel	Steel	Steel	Alloy
Allowable Torque(N•m)	5.3 ～ 495	20.1 ～ 175	0.4 ～ 25	-	-	0.25 ～ 5	0.25 ～ 5	-	0.25 ～ 5	-	-	-	0.25 ～ 20	2.8 ～ 10.7	-	0.08 ～ 1.6	0.08 ～ 1.6	-	-	-	-	-	-	-
Max. Rotational Speed(r/min)	-	-	3000 ～ 6000	500 ～ 1800	90 ～ 800	3500 ～ 18000	3500 ～ 21000	160 ～ 1300	4000 ～ 21000	220 ～ 1700	510 ～ 2000	380 ～ 1400	6000	-	280 ～ 2100	10000	10000	950 ～ 2500	150 ～ 640	-	200 ～ 1500	700 ～ 1000	730 ～ 2200	-
Allowable Lateral Misalignment Range(mm)	-	-	0.02~0.2 ～ 0.41~1.0	-	-	0.21~0.40	0.21~0.40 ～ 0.41~1.0	-	0.21~0.40 ～ 0.41~1.0	-	-	-	0.02~0.2	-	-	5.1~100	5.1~100	-	-	-	-	-	-	-
Allowable Lateral Misalignment(mm)	-	-	0.2 ～ 0.5	-	-	0.3 ～ 0.5	0.3 ～ 0.5	-	0.3 ～ 0.5	-	-	-	0.2	-	-	5.6 ～ 15.5	5.6 ～ 15.5	-	-	-	-	-	-	-
Allowable Angular Misalignment(deg)	-	-	1 ～ 4	-	-	7	3 ～ 7	-	3	-	-	-	1	40	-	45 ～ 90	45 ～ 90	-	-	-	-	-	-	-

Loading...