• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Hot Air Generating Units-Standard Type

  MISUMI

  This is a hot air generating unit. [Power Supply Frequency]For 50/60 Hz

  CAD ：

  2D / 3D

  Type	Maximum Air Volume(m2/min)	Heater Capacity(kw)	Power Supply
  Standard	-	3	Single-phase 200V

  From: ₹ 167,138.40
  Days to Ship: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Hot Air Generator

  KASHIMA

  High-Temperature Fluid Heater
  High-temperature heating of gases such as air, up to 800°C. A revolutionary high temperature hot air generator that changes the heating area of gas burners, etc. A safe and clean hot air generator more compact than the conventional products, providing quick temperature rise/fall and excellent responsiveness.
  [Features]
  · Discharges high temperature in a short time.
  · Unlike the conventional hot air generators, the gas generator is separate and the heater is extremely compact.
  · Incredibly safe and clean because it does not combust or produce flames.
  · Temperature can be adjusted through three factors: voltage, air volume, and distance from workpiece.
  · The heat source supports ceramic machining of special elements with quartz glass. A heater with very little heat load has thus been realized.
  · Highly heat resistant quartz glass is used for the hot air vent.
  · Three types are available to suit the shape and mounting methods of items being heated.
  · By combining with a temperature controller, the blowing direction of hot air can be set as desired.
  · Non-standard shapes, voltages, and capacities are available, as are irregular shapes.
  [Notes]
  · Be sure to check ventilation when applying voltage. Never use without ventilation.
  · After turning the power to the product off, wait at least 3 minutes before turning off the ventilation for safety. After that, confirm that the temperature of the hot air is 50°C or less and stop the air blow.
  · The main body uses quartz glass, so do not apply impacts.
  · When using, the main body and case will become hot, so never touch with bare hands. Burns may result.

  Type	Maximum Air Volume(m2/min)	Heater Capacity(kw)	Power Supply
  Hot-Air Beam	-	0.44	Single-phase 200V

  From: ₹ 20,327.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Hot Air Generators

  MISUMI

  [Features]·The standard has been changed. The overall length is shorter than before.

  • Volume Discount

  CAD ：

  2D / 3D

  Type	Maximum Air Volume(m2/min)	Heater Capacity(kw)	Power Supply
  Hot-Air Gun	60	0.44	Single-phase 200V

  From: ₹ 31,401.76
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hot Air-Blow Gun

  SAKAGUCHI

  Various types of hand-held hot air guns made by the German company, Steinel, are available.
  [Features]
  · Use of high-efficiency Honeycomb type heating element results in excellent cost-effectiveness.
  · The built-in temperature fuse prevents excessive heating.

  Type	Maximum Air Volume(m2/min)	Heater Capacity(kw)	Power Supply
  Hot-Air Gun	0.5 ～ 0.8	1.5 ～ 2.6	Single-phase 200V

  From: ₹ 17,530.16
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Compact Hot Air Heater SAH Series (Standard Output Type)

  TOHOKUDENSHI

  Can be used freely from room temperature to high temperature ranges (maximum 800°C).
  

  CAD ：

  2D / 3D

  Type	Maximum Air Volume(m2/min)	Heater Capacity(kw)	Power Supply
  Hot-Air Gun	-	0.44	Single-phase 200V

  From: ₹ 29,590.24
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Non-frame Torch

  SAKAGUCHI

  A hot air generator that can output hot air of 800°C even at low power. Fast start-up and easy temperature control. Able to stably supply fluid at the desired operating temperature.

  Type	Maximum Air Volume(m2/min)	Heater Capacity(kw)	Power Supply
  Hot-Air Beam	-	3.3	Single-phase 200V

  From: ₹ 45,145.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Type
Maximum Air Volume(m2/min)
Heater Capacity(kw)
Power Supply

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	KASHIMA	MISUMI	SAKAGUCHI	TOHOKUDENSHI	SAKAGUCHI
Product Series	Hot Air Generating Units-Standard Type	Small Hot Air Generator	Small Hot Air Generators	Hot Air-Blow Gun	Compact Hot Air Heater SAH Series (Standard Output Type)	Non-frame Torch
CAD	2D / 3D		2D / 3D		2D / 3D
From	₹ 167,138.40	₹ 20,327.44	₹ 31,401.76	₹ 17,530.16	₹ 29,590.24	₹ 45,145.38
Days to Ship	10 Day(s) or more	5 Day(s) or more	8 Day(s) or more	9 Day(s) or more	11 Day(s) or more	5 Day(s) or more
Type	Standard	Hot-Air Beam	Hot-Air Gun	Hot-Air Gun	Hot-Air Gun	Hot-Air Beam
Maximum Air Volume(m2/min)	-	-	60	0.5 ～ 0.8	-	-
Heater Capacity(kw)	3	0.44	0.44	1.5 ～ 2.6	0.44	3.3
Power Supply	Single-phase 200V	Single-phase 200V	Single-phase 200V	Single-phase 200V	Single-phase 200V	Single-phase 200V

Loading...