Contact Switches（Contact Material：Carbide）

• You can add up to 6 items per a category to the compare list. Compare

  

  High-Precision, MT-Touch Switch, P11

  METROL

  [Features]
  Since the fine adjustment mechanism for mounting and signal settings does not exist, it is used for detecting the origin of the moving or displaced object.
  · The tool setter of NC machine is set parallel at 0.01 mm degrees to the connector. (it can be used or thermal displacement correction)
  .

  CAD ：

  2D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Flat	Square Shape	Pin Stroke Type	2 ～ 5	Contact Point Normally Closed	1µm or Less	Aluminum	Carbide	Waterproof	-	-	0	~ Ø6

  From: ₹ 10,141.25
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High-Precision MT-Touch Switch P08/P10/P12

  METROL

  The discretion at the operating point is lesser and it can sustain even adverse environment. (IP67)
  
  [Features]
  · the discretion at the operating point is lesser.
  · The accuracy of repetition is 0.5 μm (range)
  · Judgment errors due to incorrect signal and short-period stop gets minimized
  · Can even be used in harsh conditions.
  · An IP67 highly waterproof construction.
  · No differential response
  · Detection of minute displacement can be done continuously.
  · The signal does not drift due to power supply voltage or self‐heating
  · The switch is unaffected by low current and low voltage, however using it within rated range will ensure long life. (3 million times).

  CAD ：

  2D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Flat / Needle	Bolt / Standard / Square Shape	Pin Stroke Type / Ball Stroke Type	3 ～ 10	Contact Point Normally Open / Contact Point Normally Closed	1µm or Less	Stainless Steel / BsBM Ni plating	Carbide	Waterproof	8 ～ 10	M10 x 0.5 (Fine) / M8 x 0.5 (Fine)	0 ～ 0.2	~ Ø2 / ~ Ø4

  From: ₹ 8,363.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  High Precision Contact Switches/Bolt Type

  MISUMI

  [Features]·It supports high-precision positioning with a repeatability of 0.5 µm.

  • Volume Discount

  CAD ：

  2D / 3D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Pin Stroke Type	3 ～ 10	Contact Point Normally Open / Contact Point Normally Closed	1µm or Less	Stainless Steel	Carbide	Standard	-	M10 x 0.5 (Fine)	0 ～ 0.2	~ Ø4

  From: ₹ 10,180.25
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Smart Contact Sensor (Distinction Type) [E9NC-T]

  OMRON

  Accessories of "E9NC-T" sensor having a sliding frequency that exceeds 60 million, that results in long life and durability.
  
  [Features]
  · SN-F type (flat-bottomed shape). In order to increase the strength of the primer block, the base is flattened by eliminating the bolt meant for mounting

  CAD ：

  3D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Spherical	Bolt / Standard	Pin Stroke Type	5 ～ 12	-	-	Plastic	Carbide	Standard	5 ～ 14	-	-	~ Ø4

  From: ₹ 6,796.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High Precision Touch Switches/Flat Type/Tapped

  MISUMI

  [Features]·It supports high-precision positioning with a repeatability of 0.5 µm.

  • Volume Discount

  CAD ：

  2D / 3D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Flat	Square Shape	Pin Stroke Type	3	Contact Point Normally Closed	1µm or Less	Aluminum	Carbide	Standard	-	-	0	~ Ø6

  From: ₹ 12,775.96
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Plunger BP With Ultra Compact Switch

  METROL

  [Features]
  · A ultra small type of ø4 is also provided.
  · World's smallest. Ball plunger switch

  CAD ：

  2D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt / Standard	Ball Stroke Type	0.8 ～ 1	-	-	Stainless Steel	Carbide	-	4	M5 x 0.5 (Fine)	0.3	~ Ø4

  From: ₹ 4,786.80
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High-Precision, MT-Touch Switch, P10DH

  METROL

  [Features]
  A direct acting type ball bearing is used in the bearing which is applicable for sliding, deflection and off-set.

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Pin Stroke Type	3 ～ 10	Contact Point Normally Open / Contact Point Normally Closed	1µm or Less	Stainless Steel	Carbide	Waterproof	14	M14 x 0.5 (Fine)	0 ～ 0.2	~ Ø2

  From: ₹ 17,548.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High Precision Touch Switches Tip Shape Selectable Type

  MISUMI

  This is a high-precision positioning switch, tip shape selection type. [Material]SUS303.

  • Volume Discount

  CAD ：

  2D / 3D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Flat / Needle	Bolt	Pin Stroke Type / Ball Stroke Type	3 ～ 10	Contact Point Normally Open / Contact Point Normally Closed	1µm or Less	Stainless Steel	Carbide	Standard	-	M10 x 0.5 (Fine)	0 ～ 0.2	~ Ø2 / ~ Ø4

  From: ₹ 12,041.56
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Switch for Determining Defective Products

  METROL

  [Features]
  · Low cost and also useful in determining the defective products.
  · Cost effective since sequencer is not required.
  · The range that has been approved can also be adjusted.

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Standard	Pin Stroke Type / Anglular Misalignment Tolerant Type	3	-	3µm or Less	Stainless Steel	Carbide	Waterproof	-	-	0.3	~ Ø2

  From: ₹ 18,983.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High-precision, MT-Touch Switch, P10MC

  METROL

  [Features]
  The rotation of the contact ball helps in detecting the sliding body.
  · The absence of differential response can determine the slight existence or non-existence which is useful for determining the thickness of the sheet.

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Ball Stroke Type	1.2	Contact Point Normally Open / Contact Point Normally Closed	3µm or Less	Stainless Steel	Carbide	Standard	-	M10 x 0.5 (Fine)	0 ～ 0.2	~ Ø6

  From: ₹ 8,057.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Contact Section Type
Main Body Shape
Type
Contact Stroke S(mm)
Contact Point Type
Repeatability
Body Material
Contact Material
Environment
Cylinder Outer Dia. D(mm)
Mounting Screw Nominal M
Switch Operating Point P(mm)
Contact Section O.D.

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	METROL	METROL	MISUMI	OMRON	MISUMI	METROL	METROL	MISUMI	METROL	METROL
Product Series	High-Precision, MT-Touch Switch, P11	High-Precision MT-Touch Switch P08/P10/P12	High Precision Contact Switches/Bolt Type	Smart Contact Sensor (Distinction Type) [E9NC-T]	High Precision Touch Switches/Flat Type/Tapped	Ball Plunger BP With Ultra Compact Switch	High-Precision, MT-Touch Switch, P10DH	High Precision Touch Switches Tip Shape Selectable Type	Switch for Determining Defective Products	High-precision, MT-Touch Switch, P10MC
CAD	2D	2D	2D / 3D	3D	2D / 3D	2D		2D / 3D
From	₹ 10,141.25	₹ 8,363.53	₹ 10,180.25	₹ 6,796.93	₹ 12,775.96	₹ 4,786.80	₹ 17,548.04	₹ 12,041.56	₹ 18,983.85	₹ 8,057.09
Days to Ship	Same day or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	Same day or more	Same day or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Contact Section Type	Flat	Flat / Needle	Needle	Spherical	Flat	Needle	Needle	Flat / Needle	Needle	Needle
Main Body Shape	Square Shape	Bolt / Standard / Square Shape	Bolt	Bolt / Standard	Square Shape	Bolt / Standard	Bolt	Bolt	Standard	Bolt
Type	Pin Stroke Type	Pin Stroke Type / Ball Stroke Type	Pin Stroke Type	Pin Stroke Type	Pin Stroke Type	Ball Stroke Type	Pin Stroke Type	Pin Stroke Type / Ball Stroke Type	Pin Stroke Type / Anglular Misalignment Tolerant Type	Ball Stroke Type
Contact Stroke S(mm)	2 ～ 5	3 ～ 10	3 ～ 10	5 ～ 12	3	0.8 ～ 1	3 ～ 10	3 ～ 10	3	1.2
Contact Point Type	Contact Point Normally Closed	Contact Point Normally Open / Contact Point Normally Closed	Contact Point Normally Open / Contact Point Normally Closed	-	Contact Point Normally Closed	-	Contact Point Normally Open / Contact Point Normally Closed	Contact Point Normally Open / Contact Point Normally Closed	-	Contact Point Normally Open / Contact Point Normally Closed
Repeatability	1µm or Less	1µm or Less	1µm or Less	-	1µm or Less	-	1µm or Less	1µm or Less	3µm or Less	3µm or Less
Body Material	Aluminum	Stainless Steel / BsBM Ni plating	Stainless Steel	Plastic	Aluminum	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
Contact Material	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide
Environment	Waterproof	Waterproof	Standard	Standard	Standard	-	Waterproof	Standard	Waterproof	Standard
Cylinder Outer Dia. D(mm)	-	8 ～ 10	-	5 ～ 14	-	4	14	-	-	-
Mounting Screw Nominal M	-	M10 x 0.5 (Fine) / M8 x 0.5 (Fine)	M10 x 0.5 (Fine)	-	-	M5 x 0.5 (Fine)	M14 x 0.5 (Fine)	M10 x 0.5 (Fine)	-	M10 x 0.5 (Fine)
Switch Operating Point P(mm)	0	0 ～ 0.2	0 ～ 0.2	-	0	0.3	0 ～ 0.2	0 ～ 0.2	0.3	0 ～ 0.2
Contact Section O.D.	~ Ø6	~ Ø2 / ~ Ø4	~ Ø4	~ Ø4	~ Ø6	~ Ø4	~ Ø2	~ Ø2 / ~ Ø4	~ Ø2	~ Ø6

Loading...