Contact Switches（Type：Ball Stroke Type）

• You can add up to 6 items per a category to the compare list. Compare

  

  High-Precision MT-Touch Switch P08/P10/P12

  METROL

  The discretion at the operating point is lesser and it can sustain even adverse environment. (IP67)
  
  [Features]
  · the discretion at the operating point is lesser.
  · The accuracy of repetition is 0.5 μm (range)
  · Judgment errors due to incorrect signal and short-period stop gets minimized
  · Can even be used in harsh conditions.
  · An IP67 highly waterproof construction.
  · No differential response
  · Detection of minute displacement can be done continuously.
  · The signal does not drift due to power supply voltage or self‐heating
  · The switch is unaffected by low current and low voltage, however using it within rated range will ensure long life. (3 million times).

  CAD ：

  2D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Ball Stroke Type	3 ～ 10	Contact Point Normally Open / Contact Point Normally Closed	1µm or Less	Stainless Steel	Carbide	Waterproof	-	M10 x 0.5 (Fine)	0 ～ 0.2	~ Ø2

  From: ₹ 9,743.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stop Mini STM with Switch

  METROL

  [Features]
  A mini switch of ø8×8 mm, that is small in size, having quench stopper.
  · Suitable for confined spaces
  · Miniaturization of equipment and appliance which is cost-effective
  · For straight and deflected angle
  · The movable part will move frictionless on the flat spring and hence galling of the movable parts does not occur.
  · The waterproof type (IP67) is not only for the movable part, but the surface of the stopper and the interior of the rubber boot is also dust proof.
  · The standard size of the mounted parts is so accurate that replacement is very easy.

  CAD ：

  2D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt / Standard	Ball Stroke Type	0.5	Contact Point Normally Open	0.01mm or Less	Stainless Steel	Stainless Steel	Drip-Proof	8	M10 x 0.75 (Fine)	0.25	~ Ø4

  From: ₹ 2,566.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Plunger BP With Ultra Compact Switch

  METROL

  [Features]
  · A ultra small type of ø4 is also provided.
  · World's smallest. Ball plunger switch

  CAD ：

  2D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt / Standard	Ball Stroke Type	0.8 ～ 1	-	-	Stainless Steel	Carbide	-	4	M5 x 0.5 (Fine)	0.3	~ Ø4

  From: ₹ 4,786.80
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Plunger with SwitchBP

  METROL

  [Features]
  · 1 unit dual roles. The ball plunger has an in- built touch switch.
  · Index for rotating body, indexing using the notch of the sliding conductor. The positioning function and confirmation signal are given as output.
  · Reduction in the number of parts and design man-hour. Ensures miniaturization of the machinery.

  CAD ：

  2D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Ball Stroke Type	0.8	Contact Point Normally Open	0.01mm or Less	Stainless Steel	Stainless Steel	Standard	-	M6 x 1.0 (Coarse)	0.5	~ Ø4

  From: ₹ 2,765.55
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High Precision Touch Switches Tip Shape Selectable Type

  MISUMI

  This is a high-precision positioning switch, tip shape selection type. [Material]SUS303.

  • Volume Discount

  CAD ：

  2D / 3D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Ball Stroke Type	3 ～ 10	Contact Point Normally Open / Contact Point Normally Closed	1µm or Less	Stainless Steel	Carbide	Standard	-	M10 x 0.5 (Fine)	0 ～ 0.2	~ Ø2

  From: ₹ 12,041.56
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Contact Switches with Stoppers/Ball Contact Screw/IP44

  MISUMI

  [Features]This is a ball contact, ball plunger type, with a stopper. [Material]·SUS416F

  • Volume Discount

  CAD ：

  2D / 3D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Ball Stroke Type	0.5	Contact Point Normally Open	0.01mm or Less	Stainless Steel	Stainless Steel	Drip-Proof	-	M10 x 0.75 (Fine)	0.25	~ Ø4

  From: ₹ 3,368.09
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Contact Switches/Heat Resistant/Ball Plunger/IP40

  MISUMI

  [Features]·Maximum Operating Temperature: 200 degrees. The switch is heat resistant.

  • Volume Discount

  CAD ：

  2D / 3D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Ball Stroke Type	0.8	Contact Point Normally Open	0.01mm or Less	Stainless Steel	Stainless Steel	Heat Resistant	-	M6 x 1.0 (Coarse)	0.3	~ Ø4

  From: ₹ 18,613.14
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Heat Resistant Switch HT Series

  METROL

  [Features]
  The maximum temperature for continuous operation lies at 150°C/200°C
  Plastic parts that are heat-resistant, adhesives for high temperature and heat-resistant chord have been used.

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Ball Stroke Type	0.8	Contact Point Normally Open	0.01mm or Less	Stainless Steel	Stainless Steel	Heat Resistant	-	M6 x 1.0 (Coarse)	0.5	~ Ø4

  From: ₹ 16,757.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High-precision, MT-Touch Switch, P10MC

  METROL

  [Features]
  The rotation of the contact ball helps in detecting the sliding body.
  · The absence of differential response can determine the slight existence or non-existence which is useful for determining the thickness of the sheet.

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Ball Stroke Type	1.2	Contact Point Normally Open / Contact Point Normally Closed	3µm or Less	Stainless Steel	Carbide	Standard	-	M10 x 0.5 (Fine)	0 ～ 0.2	~ Ø6

  From: ₹ 8,057.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Contact Section Type
Main Body Shape
Type
Contact Stroke S(mm)
Contact Point Type
Repeatability
Body Material
Contact Material
Environment
Cylinder Outer Dia. D(mm)
Mounting Screw Nominal M
Switch Operating Point P(mm)
Contact Section O.D.

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	METROL	METROL	METROL	METROL	MISUMI	MISUMI	MISUMI	METROL	METROL
Product Series	High-Precision MT-Touch Switch P08/P10/P12	Stop Mini STM with Switch	Ball Plunger BP With Ultra Compact Switch	Ball Plunger with SwitchBP	High Precision Touch Switches Tip Shape Selectable Type	Contact Switches with Stoppers/Ball Contact Screw/IP44	Contact Switches/Heat Resistant/Ball Plunger/IP40	Heat Resistant Switch HT Series	High-precision, MT-Touch Switch, P10MC
CAD	2D	2D	2D	2D	2D / 3D	2D / 3D	2D / 3D
From	₹ 9,743.11	₹ 2,566.09	₹ 4,786.80	₹ 2,765.55	₹ 12,041.56	₹ 3,368.09	₹ 18,613.14	₹ 16,757.76	₹ 8,057.09
Days to Ship	5 Day(s) or more	5 Day(s) or more	Same day or more	Same day or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Contact Section Type	Needle	Needle	Needle	Needle	Needle	Needle	Needle	Needle	Needle
Main Body Shape	Bolt	Bolt / Standard	Bolt / Standard	Bolt	Bolt	Bolt	Bolt	Bolt	Bolt
Type	Ball Stroke Type	Ball Stroke Type	Ball Stroke Type	Ball Stroke Type	Ball Stroke Type	Ball Stroke Type	Ball Stroke Type	Ball Stroke Type	Ball Stroke Type
Contact Stroke S(mm)	3 ～ 10	0.5	0.8 ～ 1	0.8	3 ～ 10	0.5	0.8	0.8	1.2
Contact Point Type	Contact Point Normally Open / Contact Point Normally Closed	Contact Point Normally Open	-	Contact Point Normally Open	Contact Point Normally Open / Contact Point Normally Closed	Contact Point Normally Open	Contact Point Normally Open	Contact Point Normally Open	Contact Point Normally Open / Contact Point Normally Closed
Repeatability	1µm or Less	0.01mm or Less	-	0.01mm or Less	1µm or Less	0.01mm or Less	0.01mm or Less	0.01mm or Less	3µm or Less
Body Material	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
Contact Material	Carbide	Stainless Steel	Carbide	Stainless Steel	Carbide	Stainless Steel	Stainless Steel	Stainless Steel	Carbide
Environment	Waterproof	Drip-Proof	-	Standard	Standard	Drip-Proof	Heat Resistant	Heat Resistant	Standard
Cylinder Outer Dia. D(mm)	-	8	4	-	-	-	-	-	-
Mounting Screw Nominal M	M10 x 0.5 (Fine)	M10 x 0.75 (Fine)	M5 x 0.5 (Fine)	M6 x 1.0 (Coarse)	M10 x 0.5 (Fine)	M10 x 0.75 (Fine)	M6 x 1.0 (Coarse)	M6 x 1.0 (Coarse)	M10 x 0.5 (Fine)
Switch Operating Point P(mm)	0 ～ 0.2	0.25	0.3	0.5	0 ～ 0.2	0.25	0.3	0.5	0 ～ 0.2
Contact Section O.D.	~ Ø2	~ Ø4	~ Ø4	~ Ø4	~ Ø2	~ Ø4	~ Ø4	~ Ø4	~ Ø6

Loading...