• You can add up to 6 items per a category to the compare list. Compare

  

  [Individual Block Units] Full-Ball Type LM Guide, International Standard, HSR Type

  THK

  An individual block from the THK LM guide HSR series. Extremely useful for sudden design changes and when performing maintenance.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · The ball will not fall out even if the LM rail is removed because it is held by a holding plate. (Excludes the HSR8,10, and 12).
  · Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions. Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.

  CAD ：

  2D / 3D

  From: ₹ 6,870.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Individual Block Units] Caged Ball LM Guide, International Standard, SHS Type

  THK

  An individual block from the THK LM guide SHS series. Extremely useful for sudden design changes and when performing maintenance.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions.
  ·
  · Cross-section

  CAD ：

  2D / 3D

  From: ₹ 6,832.66
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Full-Ball Type LM Guide, International Standard, HSR Type

  THK

  An international-standard sized LM guide that can be used from all positions.
  [Features]
  · Each of the ball raceways have been positioned at a 45° contact angle so that the rated load will be the same in all 4 directions (radial direction, reverse radial direction, horizontal directions) that act on the LM block,
  allowing it to be used from any position and in a broad range of applications.
  · The well-balanced 4-raceway configuration ensures a sufficient preload is applied, allowing you to increase rigidity in 4 directions with ease.
  · The self-aligning capability achieved from THK's proprietary circular arched-groove front face assembly (DF set)
  makes it possible to absorb any mounting error, even when there is a preload. It also delivers a smooth linear motion at high accuracies.
  · With no differential slipping of the balls in relation to any preload or eccentric loads, ensuring smooth operation. Also, its excellent abrasion-resistance ensures accuracy over a long period.
  · The LM block, LM rail and balls are all available in stainless steel.
  · The balls are retained by the retaining plate without falling even when the LM rails are removed. (Excludes the HSR8, 10 and 12).

  CAD ：

  2D / 3D

  Days to Ship: 19 Day(s) or more

  19 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Short Delivery Size] Full-Ball Type LM Guide, International Standard, HSR Type

  THK

  Each of the ball rows are arranged at a contact point of 45°, allowing the guide to be used with any posture
  [Features]
  · LM rails and LM blocks feature 4 precision-ground raceways that the balls travel along. The end plates embedded in the LM block circulate the rows of balls.
  · Each of the ball raceways have been positioned at a 45° contact angle so that the rated load will be the same in all 4 directions (radial direction, reverse radial direction, horizontal directions) that act on the LM block, allowing it to be used from any position.
  · Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
  · The well-balanced 4-raceway configuration ensures a sufficient preload is applied, allowing you to increase rigidity in 4 directions with ease.
  · With no differential slipping of the balls in relation to any preload or eccentric loads, ensuring smooth operation. Also, its excellent abrasion-resistance ensures accuracy over a long period.
  [Applications]
  · Surface grinders,electric discharge machining, high-speed conveyors, NC lathes, injection molding machines
  · Woodworking machines, semiconductor manufacturing devices, inspection devices, food processing machinery

  CAD ：

  2D / 3D

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Single Rail] Full-Ball Type LM Guide, International Standard, HSR Type

  THK

  No need to worry over delivery because the THK LM guide ships in 3 days. Started selling rails separately, in response to requests. The rail length can be designated at units of 1 mm.

  CAD ：

  2D

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Individual Block Units] Caged Ball LM Guide, Radial Type, SSR Type

  THK

  An individual block from the THK LM guide SSR series. Extremely useful for sudden design changes and when performing maintenance.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · This ball retainer has been adopted which has eliminated mutual friction between balls and also improves the holding power of the grease.
  · , which makes it possible to be maintenance-free over a long term, have a long life, have excellent high speed, and low noise.
  · Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.

  CAD ：

  2D / 3D

  From: ₹ 7,870.69
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Miniature Full-Ball Type LM Guide SRS-G Type

  THK

  Lightweight and compact structure.
  [Features]
  · The LM block is designed to ensure rigidity within a limited space.
  · Combining with large diameter balls can provide rigidity in each direction.
  · Capable of receiving loads in all directions, and a single-rail guide can adequately operate under a small moment load.
  · Despite its compact-size, it is a finite stroke type of cross roller guide and ball slide.
  · A highly reliable and compact linear motion system with no problematic cage misalignment.
  · LM block, LM rail, and ball are all compatible with stainless steel.

  CAD ：

  2D / 3D

  Days to Ship: 19 Day(s) or more

  19 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Caged Ball LM Guide, Miniature, SRS Type

  THK

  A miniature type with a compact structure. Can be mounted in areas where space is at a premium. Part of the LM block is made of resin for a lighter overall weight.
  [Features]
  · The adoption of the ball retainer has eliminated mutual friction between the balls, providing excellent high speed characteristics, low noise, good sound quality and a long lifespan, and keeps it maintenance-free for an extended period.
  · The ball retainer eliminates mutual friction between the balls, improving how well the grease is maintained and reducing the amount of dust raised.
  · The LM block and LM rail are both made with highly rust-preventive stainless steel.
  · The rail cross-section height is kept low, and it has a compact structure with a single ball row on the right and left, allowing it to be mounted in areas where space is at a premium.
  · A lightweight and low-inertia type where part of the LM block (around the ball escape hole, etc.) has been molded with resin using insert molding.
  [Applications]
  · Surface grinders,electric discharge machining, high-speed conveyors, NC lathes, injection molding machines
  · Woodworking machines, semiconductor manufacturing devices, inspection devices, food processing machinery

  CAD ：

  2D / 3D

  Days to Ship: 19 Day(s) or more

  19 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Short Delivery Size] Caged Ball LM Guide, International Standard, SHS Type

  THK

  Each of the ball rows are arranged at a contact point of 45°, allowing the guide to be used with any posture
  [Features]
  · LM rails and LM blocks feature 4 precision-ground raceways that the balls travel along. The end plates embedded in the LM block circulate the rows of balls.
  · Each of the ball raceways have been positioned at a 45° contact angle so that the rated load will be the same in all 4 directions (radial direction, reverse radial direction, horizontal directions) that act on the LM block, allowing it to be used from any position.
  · Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
  [Applications]
  · Surface grinders,electric discharge machining, high-speed conveyors, NC lathes, injection molding machines
  · Woodworking machines, semiconductor manufacturing devices, inspection devices, food processing machinery

  CAD ：

  2D / 3D

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type

  THK

  An individual block item from the THK LM guide SR series. Extremely useful for sudden design changes and when performing maintenance.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled
  · in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
  · Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
  · Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.

  CAD ：

  2D / 3D

  From: ₹ 7,404.50
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Linear Rail System SBI-FL/FLL Series

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  CAD ：

  2D / 3D

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model

  THK

  [Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model
  These slide blocks are applicable for THK brand linear guides. They offer a wide variety of sizes to choose from.
  [Feature]
  ● Block Type : Wide Block
  ● Applicable for Rail Type : Wide Rail
  ● Accuracy Grade : Standard Grade
  ● Number of Block Mounting Holes : 4 or 6
  ● Mounting Hole Dimension : M5, M6 and M8
  ● Material: Carbon Steel and Stainless Steel
  [Application]
  It is used in a THK LM Guide HRW Series.
  

  CAD ：

  2D / 3D

  From: ₹ 15,143.08
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Linear Way L LWL (F) Series

  IKO

  This simple structure which has two rows and four contact points and the unique sizing technology is what led to the creation of this ultra small sized linear guiding device.
  
  [Features]
  · If you are looking for a simple structure, then try this ultra small size (smallest sized LWL1 has a truck rail of just 1 mm)
  · Wide variation that responds to needs
  · A ball retaining type that is easy to assemble
  · Made from a stainless steel that is highly corrosion-resistant
  · Compatible with a wide variety of application in special environments
  

  CAD ：

  2D

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Caged Ball LM Guide, International Standard, SHS Type

  THK

  Each of the ball rows are arranged at a contact point of 45°, allowing the guide to be used with any posture
  [Features]
  · The adoption of the ball retainer has eliminated mutual friction between the balls, providing excellent high speed characteristics, low noise, good sound quality and a long lifespan, and keeps it maintenance-free for an extended period.
  · The ball retainer eliminates mutual friction between the balls, improving how well the grease is maintained and reducing the amount of dust raised.
  · Each of the ball raceways have been positioned at a 45° contact angle so that the rated load will be the same in all 4 directions (radial direction, reverse radial direction, horizontal directions) that act on the LM block, allowing it to be used from any position and in a broad range of applications.
  · The self-aligning capability achieved from THK's proprietary circular arched-groove front face assembly (DF set) makes it possible to absorb any mounting error, even when there is a preload. It also delivers a smooth linear motion at high accuracies.
  · Developed by THK, a pioneer of linear motion systems, it features a dimensional design that conforms to the full-ball type LM guide HSR type, the de-facto global standard.
  · The cross-section of the LM rail has been made more compact, lowering the center of gravity and further increasing rigidity.
  [Applications]
  · Surface grinders,electric discharge machining, high-speed conveyors, NC lathes, injection molding machines
  · Woodworking machines, semiconductor manufacturing devices, inspection devices, food processing machinery

  CAD ：

  2D / 3D

  Days to Ship: 19 Day(s) or more

  19 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Individual Block Units] Caged Ball LM Guide, Wide Rail SHW Type

  THK

  [Individual Block Units] Caged Ball LM Guide, Wide Rail SHW Type
  These slide blocks are applicable for THK brand linear guides. They offer a wide variety of sizes to choose from.
  [Feature]
  ● Block Type : Wide Block
  ● Applicable for Rail Type : Wide Rail
  ● Accuracy Grade : Standard Grade
  ● Number of Block Mounting Holes : 4 or 6
  ● Mounting Hole Dimension : M4, M5, M6 and M8
  ● Material: Carbon Steel
  [Application]
  It is used in a THK LM Guide SHW Series.
  

  CAD ：

  2D / 3D

  From: ₹ 15,669.77
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Caged Ball LM Guide, Radial Type, SSR Type

  THK

  Compact design with low cross-sectional height and ideal for horizontal guides.
  [Features]
  · The adoption of the ball retainer has eliminated mutual friction between the balls, providing excellent high speed characteristics, low noise, good sound quality and a long lifespan, and keeps it maintenance-free for an extended period.
  · The ball retainer eliminates mutual friction between the balls, improving how well the grease is maintained and reducing the amount of dust raised.
  · A compact design with low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.
  · Features a ball-contacting type structure that demonstrates strong performance in the radial direction. This means there is little displacement in the radial direction when a radial load is applied, providing stable running accuracy.
  · The self-aligning capability achieved from THK's proprietary circular arched-groove front face assembly (DF set) makes it possible to absorb any mounting error, even when there is a preload. It also delivers a smooth linear motion at high accuracies.
  · Also standardized the stainless steel made model using highly-corrosion resistant stainless steel in the LM block, LM rail and balls.
  [Applications]
  · Surface grinders,electric discharge machining, high-speed conveyors, NC lathes, injection molding machines
  · Woodworking machines, semiconductor manufacturing devices, inspection devices, food processing machinery

  CAD ：

  2D / 3D

  Days to Ship: 19 Day(s) or more

  19 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Caged Ball LM Guide Low Floor Wide Rail SHW Type

  THK

  A structure with a wide rail and low center of gravity. Thinner than the SHS type, which is advantageous when Mc moment rigidity is required.
  
  [Features]
  · A highly rigid LM guide with superior high speed performance and that is maintenance-free over long periods of time. Also generates little noise thanks to the adoption of a ball retainer.
  · The SHW, which has a structure with a wide LM rail and a low center of gravity, is ideal for use in locations where there are space limitations or when there are MC moment rigidity requirements.
  · Each of the ball raceways have been positioned at a 45° contact angle so that the rated load will be the same in all 4 directions (radial direction, reverse radial direction, horizontal directions) that act on the LM block, allowing it to be used from any position and in a broad range of applications.
  · The self-aligning capability achieved from the manufacturer's proprietary circular arched-groove front face assembly (DF set) makes it possible to absorb any mounting error, even when there is a preload. It also delivers a smooth linear motion at high accuracies.
  · The ball retainers eliminate friction generated by the balls rubbing against each other, while the lubricant oil (agent) is maintained, providing superior low-dust performance.

  CAD ：

  2D / 3D

  Days to Ship: 22 Day(s) or more

  22 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Linear Rail System SBI-SL/SLL Series

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  CAD ：

  2D / 3D

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Single Rail] Full-Ball Type LM Guide, Radial Type, SR Type

  THK

  Started selling rails separately, in response to requests. The rail length can be designated at units of 1 mm.
  
  [Features]
  · LM rails and LM blocks feature 4 precision-ground raceways that the balls travel along. The end plates embedded in the ball retainer and LM block circulate the rows of balls.
  · The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
  · Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly accurate and consistent linear motion.
  · A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.

  CAD ：

  2D

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Full-Ball Type LM Guide, Radial Type, SR Model

  THK

  Compact design with low cross-sectional height and ideal for horizontal guides.
  [Features]
  · Compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.
  · Self-aligning type that can easily absorb error in the level accuracy and the degree of parallelism for the 2 shafts, which is capable of highly accurate and smooth movements.
  · The retainer part on each of the ball rows can obtain rolling motions with limited sound because the balls are designed for smooth circulation using the guiding part on the end plate.
  · Accuracy is possible to be maintained for long periods of time, has excellent abrasion-resistance and limited differential slipping even when there is a preload or uneven load.
  · LM block, LM rail, and ball are all compatible with stainless steel.
  · The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.

  CAD ：

  2D / 3D

  Days to Ship: 19 Day(s) or more

  19 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Single Rail] Caged Ball LM Guide, Radial Type, SSR Type

  THK

  No need to worry over delivery because the THK LM guide ships in 3 days. Started selling rails separately, in response to requests. The rail length can be designated at units of 1 mm.

  CAD ：

  2D

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Single Rail] Full-Ball Type LM Guide, Wide Rail, HRW Type

  THK

  Started selling rails separately, in response to requests. The rail length can be designated at units of 1 mm.
  
  [Features]
  · LM rails and LM blocks feature 4 precision-ground raceways that the balls travel along. The end plates embedded in the ball retainer and LM block circulate the rows of balls.

  CAD ：

  2D / 3D

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Linear Way E LWE Series

  IKO

  Aiming for compactness on all sides. A universal type linear motion guiding device that has high versatility.
  
  [Features]
  · A universal series that is compact and has high versatility
  · Wide variation that responds to needs
  · A stainless steel line up with excellent corrosion resistance
  · A low noise linear way E that achieves smooth and quiet work
  

  CAD ：

  2D

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Linear Rail System SBI-HL/HLL Series

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  CAD ：

  2D / 3D

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Full-Ball Type LM Guide Wide Rail HRW Type

  THK

  A structure with a wide rail and low center of gravity. It is thinner than HSR and is advantageous when Mc moment stiffness is required.
  
  [Features]
  · LM rails and LM blocks feature 4 precision-ground raceways that the balls travel along. The end plates embedded in the LM block circulate the rows of balls.
  · Compact heavy load: A high number of effective balls makes it possible to obtain high rigidity in all directions. Has a wide rail width and can adequately withstand moments with a single shaft.
  There is a high rigidity in the horizontal direction and there is no need of reinforcement such as horizontal pressing due to large secondary moments being incurred on the rail cross-section.
  · The self-aligning capability: The self-adjusting power effect of the front-facing combination (DF set) of unique circular arc groove allows to absorb mounting errors even if preload is applied, resulting in highly accurate, smooth linear motion.

  CAD ：

  2D / 3D

  Days to Ship: 19 Day(s) or more

  19 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Short Delivery Size] Caged Ball LM Guide, Miniature, SRS Type

  THK

  THK offers 3-day shipment on its best-selling products. Select from product numbers that are applicable for 3-day shipping during the design for a fast delivery time. The SRS series is designed for installation in locations in which space is at a premium.

  CAD ：

  2D / 3D

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Single Rail] Caged Ball LM Guide, International Standard, SHS Type

  THK

  [Single Rail] Caged Ball LM Guide, International Standard, SHS Type
  These rails are applicable for THK brand linear guides. They offer a wide variety of sizes to choose from.
  [Feature]
  ● Rail Length (mm.) : The size is configurable between 73 to 2920 mm, and the minimum length can be increased by increments 1 mm.
  ● Rail Type : Standard
  ● Rail Mounting Hole Pitch (mm.) : 60 and 80
  ● Rail Mounting Hole Diameter (mm.) : 4.5, 6, 7 and 9
  [Application]
  It is used in a THK LM Guide SHS Type
  

  CAD ：

  2D

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-Lube Linear Way L ML (F) Series

  IKO

  This simple structure which has two rows and four contact points and the unique sizing technology is what led to the creation of this ultra small sized linear guiding device.
  
  [Features]
  · If you are looking for a simple structure, then try this ultra small size (smallest sized LWL1 has a truck rail of just 1 mm)
  · Wide variation that responds to needs
  · A ball retaining type that is easy to assemble
  · Made from a stainless steel that is highly corrosion-resistant
  · Compatible with a wide variety of application in special environments
  

  CAD ：

  2D

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Full-Ball Type LM Guide for High Temperatures Model HSR-M1

  THK

  High temperature LM guide with maximum operating temperature of 150°C.
  [Features]
  · Each ball row is positioned at a 45° contact angle so that the rated load is same for all 4 directions acting on the LM block.
  · Can be used for a wide range of applications in any posture.
  · The well-balanced 4-raceway configuration ensures a sufficient preload is applied, allowing you to increase rigidity in 4 directions with ease.
  · Use of the stainless steel in end plates and high temperature rubber material in end seals achieves the maximum operating temperature of 150°C.
  · The dimensional stabilization treatment is performed to achieve excellent dimensional stability after heating and cooling.
  · Ideal for use in cleanrooms because the LM block, LM rail and ball all use stainless steel with excellent corrosion-resistance.
  · Uses high temperature grease to minimize fluctuations in rolling resistance due to grease even when the temperature changes from room temperature to high temperature.

  CAD ：

  2D

  Days to Ship: 19 Day(s) or more

  19 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  [Rail only]Ball retainer with LM Guide Wide rail SHW form

  THK

  We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.

  CAD ：

  2D / 3D

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Linear Rail System SBI-SV Series

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  CAD ：

  2D / 3D

  Days to Ship: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Linear Rail System SBI-CL/CLL Series

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  CAD ：

  2D / 3D

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Linear Rail System SBI-FV Series

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  CAD ：

  2D / 3D

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Rail Length L(mm)
Block Type
Rail Width(mm)
Mounting Height H(mm)
Rail Type
No. of Blocks
Set / Single Item
Preload
Accuracy
Material
Ball Arrangement
Nominal Part Number
Retainer
Block Mounting Hole Pitch (Width Direction)(mm)
Block Mounting Hole Pitch (Length Direction)(mm)
Block Mounting Hole Diameter
Rail Mounting Hole Pitch(mm)
Rail Mounting Hole Diameter

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	THK	THK	THK	THK	THK	THK	THK	THK	THK	THK	SBC	THK	IKO	THK	THK	THK	THK	SBC	THK	THK	THK	THK	IKO	SBC	THK	THK	THK	IKO	THK	THK	SBC	SBC	SBC
Product Series	[Individual Block Units] Full-Ball Type LM Guide, International Standard, HSR Type	[Individual Block Units] Caged Ball LM Guide, International Standard, SHS Type	Full-Ball Type LM Guide, International Standard, HSR Type	[Short Delivery Size] Full-Ball Type LM Guide, International Standard, HSR Type	[Single Rail] Full-Ball Type LM Guide, International Standard, HSR Type	[Individual Block Units] Caged Ball LM Guide, Radial Type, SSR Type	Miniature Full-Ball Type LM Guide SRS-G Type	Caged Ball LM Guide, Miniature, SRS Type	[Short Delivery Size] Caged Ball LM Guide, International Standard, SHS Type	[Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type	Linear Rail System SBI-FL/FLL Series	[Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model	Linear Way L LWL (F) Series	Caged Ball LM Guide, International Standard, SHS Type	[Individual Block Units] Caged Ball LM Guide, Wide Rail SHW Type	Caged Ball LM Guide, Radial Type, SSR Type	Caged Ball LM Guide Low Floor Wide Rail SHW Type	Linear Rail System SBI-SL/SLL Series	[Single Rail] Full-Ball Type LM Guide, Radial Type, SR Type	Full-Ball Type LM Guide, Radial Type, SR Model	[Single Rail] Caged Ball LM Guide, Radial Type, SSR Type	[Single Rail] Full-Ball Type LM Guide, Wide Rail, HRW Type	Linear Way E LWE Series	Linear Rail System SBI-HL/HLL Series	Full-Ball Type LM Guide Wide Rail HRW Type	[Short Delivery Size] Caged Ball LM Guide, Miniature, SRS Type	[Single Rail] Caged Ball LM Guide, International Standard, SHS Type	C-Lube Linear Way L ML (F) Series	Full-Ball Type LM Guide for High Temperatures Model HSR-M1	[Rail only]Ball retainer with LM Guide Wide rail SHW form	Linear Rail System SBI-SV Series	Linear Rail System SBI-CL/CLL Series	Linear Rail System SBI-FV Series
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D	2D / 3D	2D	2D / 3D	2D	2D / 3D	2D / 3D	2D / 3D	2D	2D	2D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From	₹ 6,870.16	₹ 6,832.66				₹ 7,870.69				₹ 7,404.50		₹ 15,143.08			₹ 15,669.77
Days to Ship	5 Day(s) or more	5 Day(s) or more	19 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	19 Day(s) or more	19 Day(s) or more	7 Day(s) or more	5 Day(s) or more	9 Day(s) or more	5 Day(s) or more	9 Day(s) or more	19 Day(s) or more	5 Day(s) or more	19 Day(s) or more	22 Day(s) or more	9 Day(s) or more	7 Day(s) or more	19 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	19 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	19 Day(s) or more	7 Day(s) or more	10 Day(s) or more	9 Day(s) or more	9 Day(s) or more
Rail Length L(mm)	-	-	64 ～ 3000	73 ～ 2920	73 ～ 2920	-	32 ～ 2000	30 ～ 2000	73 ～ 2920	-	71 ～ 4000	-	20 ～ 1000	71 ～ 3000	-	47 ～ 3000	108 ～ 3000	71 ～ 4000	73 ～ 3000	73 ～ 3000	73 ～ 2920	64 ～ 2920	42 ～ 3000	71 ～ 4000	72 ～ 3000	25 ～ 430	73 ～ 2920	20 ～ 1000	67 ～ 1500	60 ～ 2920	47 ～ 2900	92 ～ 4000	47 ～ 2900
Block Type	Standard / Wide	Standard / Wide	Standard / Wide	Standard / Wide	-	Standard / Wide	Standard / Wide	Standard / Wide / Long	Standard / Wide	Standard / Wide	Wide / Wide Long	Wide	Standard / Short / Long	Standard / Wide	Wide	Standard	Wide	Standard / Long	-	Wide Short	-	-	-	Standard / Long	Wide	Standard / Wide	-	-	Standard / Wide	-	Standard	Standard / Long	Wide
Rail Width(mm)	-	-	15 ～ 63	15 ～ 34	15 ～ 34	-	9 ～ 42	9 ～ 42	15 ～ 34	-	15 ～ 45	-	5 ～ 42	15 ～ 28	-	15 ～ 20	69	15 ～ 45	15 ～ 34	23	15 ～ 34	33 ～ 42	-	15 ～ 45	37 ～ 42	10 ～ 42	15 ～ 34	-	15 ～ 28	37 ～ 42	15 ～ 23	20 ～ 23	15 ～ 23
Mounting Height H(mm)	-	-	28 ～ 90	28 ～ 55	24 ～ 48	-	10 ～ 25	6.5 ～ 20	24 ～ 55	-	24 ～ 60	-	6 ～ 25	24 ～ 42	-	24 ～ 28	35	28 ～ 70	24 ～ 48	33	24 ～ 48	17 ～ 27	-	24 ～ 60	21 ～ 27	6.5 ～ 16	24 ～ 48	-	24 ～ 45	21 ～ 27	24 ～ 33	28 ～ 33	24 ～ 33
Rail Type	Standard	Standard	Standard	Standard	Standard	Standard	Standard / Wide	Standard / Wide	Standard	Standard	Standard	Wide	Standard / Wide	Standard	Wide	Standard	Wide	Standard	Standard	Standard	Standard	Wide	-	Standard	Wide	Standard / Wide	Standard	-	Standard	Wide	Standard	Standard	Standard
No. of Blocks	1	1	1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9	1 / 2 / 3 / 4	-	1	1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9	1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9	1 / 2 / 3 / 4	1	1 / 2 / 3 / 4	1	1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9	1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9	1	1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9	1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9	1 / 2 / 3 / 4	-	1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9	-	-	1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9	1 / 2 / 3 / 4	1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9	1 / 2	-	1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9	1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9	-	1 / 2 / 3 / 4	1 / 2 / 3 / 4	1 / 2 / 3 / 4
Set / Single Item	Block Only	Block Only	Set	Set	Rail Only	Block Only	Set	Set	Set	Block Only	Set	Block Only	Set	Set	Block Only	Set	Set	Set	Rail Only	Set	Rail Only	Rail Only	-	Set	Set	Set	Rail Only	-	Set	Rail Only	Set	Set	Set
Preload	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard
Accuracy	Standard Grade	Standard Grade	Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade / High Grade / Precision Grade	Standard Grade / High Grade / Precision Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	High Grade	Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade	Standard Grade	Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade	Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade	Standard Grade	Standard Grade	Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade	Standard Grade	Standard Grade	-	Standard Grade	Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade	Standard Grade	Standard Grade	High Grade	Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade
Material	Carbon Steel / Stainless Steel	Carbon Steel	Carbon Steel / Stainless Steel	Carbon Steel	-	Carbon Steel / Stainless Steel	Stainless Steel	Stainless Steel	Carbon Steel	Carbon Steel / Stainless Steel	Carbon Steel	Carbon Steel / Stainless Steel	Stainless Steel	Carbon Steel	Carbon Steel	Carbon Steel	Carbon Steel	Carbon Steel	-	Carbon Steel	-	-	Carbon Steel	Carbon Steel	Carbon Steel / Stainless Steel	Stainless Steel	-	Stainless Steel	Stainless Steel	Carbon Steel	Carbon Steel	Carbon Steel	Carbon Steel
Ball Arrangement	4-Row, Circular	4-Row, Circular	4-Row, Circular	4-Row, Circular	-	4-Row, Circular	Standard	Standard	4-Row, Circular	4-Row, Circular	4-Row, Circular	4-Row, Circular	-	4-Row, Circular	4-Row, Circular	4-Row, Circular	4-Row, Circular	4-Row, Circular	-	4-Row, Circular	-	-	-	4-Row, Circular	4-Row, Circular	Standard	-	-	4-Row, Circular	-	4-Row, Circular	4-Row, Circular	4-Row, Circular
Nominal Part Number	15 ～ 35	15 ～ 35	15 ～ 65	15 ～ 35	15 ～ 35	15 ～ 35	9W ～ 25	5W ～ 20	15 ～ 35	15 ～ 35	15 ～ 45	17 ～ 35	5 ～ 42	15 ～ 30	21 ～ 35	15 ～ 20	35	15 ～ 45	15 ～ 35	25	15 ～ 35	17 ～ 27	-	15 ～ 45	21 ～ 27	5 ～ 15W	15 ～ 35	-	15 ～ 30	21 ～ 27	15 ～ 25	20 ～ 25	15 ～ 25
Retainer	N/A	Available	N/A	N/A	-	Available	N/A	Available	Available	N/A	-	N/A	N/A	Available	Available	Available	Available	-	-	N/A	-	-	-	-	N/A	Available	-	-	N/A	-	-	-	-
Block Mounting Hole Pitch (Width Direction)(mm)	26 ～ 82	26 ～ 72	26 ～ 142	26 ～ 82	-	26 ～ 60	15 ～ 45	15 ～ 45	26 ～ 72	26 ～ 82	-	31 ～ 107	-	26 ～ 72	31 ～ 107	26 ～ 32	107	-	-	60	-	-	-	-	46 ～ 60	8 ～ 45	-	-	11.5 ～ 72	-	-	-	-
Block Mounting Hole Pitch (Length Direction)(mm)	26 ～ 72	26 ～ 72	26 ～ 120	26 ～ 72	-	26 ～ 50	10 ～ 35	10 ～ 35	26 ～ 72	26 ～ 50	-	19 ～ 60	-	26 ～ 52	19 ～ 60	26	60	-	-	-	-	-	-	-	29 ～ 32	6.5 ～ 20	-	-	18 ～ 60	-	-	-	-
Block Mounting Hole Diameter	4 ～ 10	4 ～ 8.5	4 ～ 16	4 ～ 10	-	4 ～ 8	3 ～ 6	3 ～ 4	4 ～ 8.5	4 ～ 9	-	3.3 ～ 8	-	4 ～ 8.5	4.4 ～ 8	4 ～ 5	8	-	-	7	-	-	-	-	4.4 ～ 6	2 ～ 4	-	-	4 ～ 10	-	-	-	-
Rail Mounting Hole Pitch(mm)	60 ～ 80	60 ～ 80	60 ～ 150	60 ～ 80	60 ～ 80	60 ～ 80	20 ～ 60	20 ～ 60	60 ～ 80	60 ～ 80	-	40 ～ 80	-	60 ～ 80	50 ～ 80	60	80	-	60 ～ 80	60	60 ～ 80	40 ～ 60	-	-	50 ～ 60	15 ～ 40	60 ～ 80	-	60 ～ 80	50 ～ 60	-	-	-
Rail Mounting Hole Diameter	4.5 ～ 9	4.5 ～ 9	4.5 ～ 18	4.5 ～ 9	4.5 ～ 9	4.5 ～ 9	3.5 ～ 7	3 ～ 6	4.5 ～ 9	3.5 ～ 9	-	4.5 ～ 7	-	4.5 ～ 9	4.5 ～ 7	4.5 ～ 6	7	-	3.5 ～ 9	7	4.5 ～ 9	4.5	-	-	4.5	2.4 ～ 4.5	4.5 ～ 9	-	4.5 ～ 9	4.5	-	-	-

Loading...