YAMAWA MFG Screw-Hole-Related Tools（work material：High Carbon Steel (C with a content over 0.45%)）

• You can add up to 6 items per a category to the compare list. Compare

  

  Hand Taps_HT

  YAMAWA MFG

  Hand tap used for general tapping work.
  [Features]
  ・ High blade tip strength makes it easy for regrinding.
  ・ More suitable for manual work compared to taps of other shapes.
  ・ 2 types are available, with 5P or 1.5P chamfered threads.
  ・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
  ・ Machining with mechanical machinery is also possible.
  ・ Has straight grooves out of consideration for cutting chip stow.
  ・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.
  [Applications]
  ・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.0 ～ M48	Meter / unified / Sewing Machine	High Carbon Steel (C with a content over 0.45%)[○]	0.2 ～ 100	High-speed steel	Hand Tap	For through hole / For blind hole	1.5P ～ 5P	-	NA	36 ～ 185

  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Roll Taps for Dry Tapping, Coated_OL+RZ

  YAMAWA MFG

  It is a roll tap that's capable of tapping without lubrication for burred thin iron plates and steel with relatively short processing length at the size of M6 or less.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.10 ～ M6	Meter / unified	High Carbon Steel (C with a content over 0.45%)[○]	0.25 ～ 64	Powder high-speed steel	Roll tap	For through hole	4P	TiCN	Available	36 ～ 62

  From: ₹ 1,814.64
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  High Performance Roll Taps, Coated_HP+RZ

  YAMAWA MFG

  It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.10-32UNF ～ M20	Meter / unified	High Carbon Steel (C with a content over 0.45%)[○]	0.25 ～ 1.75	Powder high-speed steel	Roll tap	For through hole / For blind hole	2P ～ 4P	TiCN	Available	36 ～ 105

  From: ₹ 1,814.64
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Spiral Fluted Taps_LS-SP

  YAMAWA MFG

  * LS-N-SP will switch to LS-SP as soon as the stock runs out.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1 ～ M36	Meter / unified / Whitworth	High Carbon Steel (C with a content over 0.45%)[○]	1 ～ 24	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	100 ～ 300

  From: ₹ 1,801.45
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Hand Taps for Taper Pipe Threads Long (ℓg) Type_LS-PT

  YAMAWA MFG

  For standard pipe taps, it is used when the protruding length of the screw is insufficient.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1 ～ 3/8	Taper for Pipe	High Carbon Steel (C with a content over 0.45%)[○]	11 ～ 28	High-speed steel	Tap for pipes	For through hole / For blind hole	2.5P	-	NA	100 ～ 200

  From: ₹ 4,023.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Pointed Taps for Hard-to-Machine Materials_EH-PO

  YAMAWA MFG

  Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M24	Meter	High Carbon Steel (C with a content over 0.45%)[○]	0.5 ～ 3	Cobalt HSS	Point tap	For through hole	4.5P	-	NA	46 ～ 120

  From: ₹ 1,036.65
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Pointed Taps for Stainless Steels_SU+PO

  YAMAWA MFG

  Point tap for through-hole machining with extremely viscous or work-hardened work material.
  [Features]
  Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
  · Capable of machining both synchronously and asynchronously.
  · Machining speed of 10 m/min or less is recommended.
  [Applications]
  · Ideal for machining through-holes with chrome steel, molybdenum steel, and stainless steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.10 ～ M42	Meter / unified / Whitworth	High Carbon Steel (C with a content over 0.45%)[○]	0.3 ～ 56	High-speed steel	Point tap	For through hole	5P	-	NA	36 ～ 175

  From: ₹ 881.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Roll Taps, Coated_R+V

  YAMAWA MFG

  A coating roll tap suitable for threading steel and nonferrous materials.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1 ～ M6	Meter	High Carbon Steel (C with a content over 0.45%)[○]	0.25 ～ 1	High-speed steel	Roll tap	For through hole / For blind hole	2P ～ 4P	TiN	Available	36 ～ 62

  From: ₹ 1,701.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hand Taps for Left Hand Threads_HT-LH

  YAMAWA MFG

  It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2.5 ～ M8	Meter	High Carbon Steel (C with a content over 0.45%)[○]	0.45 ～ 0.75	High-speed steel	Hand Tap	For through hole / For blind hole	5P	-	NA	46 ～ 70

  From: ₹ 1,434.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Pointed Taps for Left Hand Threads_PO-V

  YAMAWA MFG

  Coated point tap suitable for low carbon steel to high carbon steel machining.
  [Features]
  · Since it has a coating, stable processing is possible at medium cutting speeds, and the tool life is improved.
  [Applications]
  · Can process both synchronously and asynchronously.
  · Recommended for machining speeds of 10 to 20 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	High Carbon Steel (C with a content over 0.45%)[○]	0.5 ～ 1.75	High-speed steel	Point tap	For through hole	5P	TiN	Available	46 ～ 82

  From: ₹ 1,684.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Steels_HDISP

  YAMAWA MFG

  Both mist and dry processing are possible, and a center through hole form has been adopted that can be used for internally lubricated machining. Also suitable for horizontal/vertical machining of blind holes in materials such as carbon steel and alloy steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M6 ～ M20	Meter	High Carbon Steel (C with a content over 0.45%)[○]	1 ～ 1.75	Cobalt HSS	Spiral Tap	For through hole / For blind hole	2.5P	TiCN	Available	62 ～ 105

  From: ₹ 2,354.73
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Steels_HFISP

  YAMAWA MFG

  Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Also suitable for horizontal machining of blind holes in materials such as carbon steel and alloy steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M6 ～ M20	Meter	High Carbon Steel (C with a content over 0.45%)[○]	1 ～ 1.75	Cobalt HSS	Spiral Tap	For through hole / For blind hole	2.5P	TiCN	Available	62 ～ 105

  From: ₹ 2,354.73
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Fluted Taps for Stainless Steels_SU+SP

  YAMAWA MFG

  Spiral tap for blind hole machining with extremely viscous or work-hardened work material.
  [Features]
  · For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
  · Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.
  · Stable scrap is ejected and a good finish is realized.
  · Capable of machining both synchronously and asynchronously.
  · Machining speed of 10 m/min or less is recommended.
  [Applications]
  Optimal for machining extremely viscous or work-hardened work material.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.10 ～ M45	Meter / unified / Whitworth	High Carbon Steel (C with a content over 0.45%)[○]	0.3 ～ 56	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	36 ～ 180

  From: ₹ 869.67
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Stainless Steels, Through Hole Use（with LH Spiral Flutes）_SU+SL

  YAMAWA MFG

  A tap suitable for machining through holes, including viscous materials that have a high machining hardness such as stainless steel, chrome steel, and molybdenum steel.
  [Features]
  · Achieves a tool life triple or more that of SU-PO for SUS304.
  · Provides excellent finish and thread shape to female thread flanks even after 2,000 drilling.
  · By adopting inverse twisted spiral groove, the discharge of chips is improved and tool life is improved compared to SU-PO.
  [Applications]
  · Can process both synchronously and asynchronously.
  · Recommended for machining speeds of 5 to 15 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M6	Meter	High Carbon Steel (C with a content over 0.45%)[○]	0.5 ～ 1	High-speed steel	Spiral Tap	For through hole	5P	-	NA	46 ～ 62

  From: ₹ 873.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Fluted Taps, Coated, Through Hole Use（with LH Spiral Flutes）_AU+SL

  YAMAWA MFG

  A coated spiral tap for through holes that provides sufficient performance for synchronous/asynchronous machining and enables stable threading in the mid-speed range (10 to 25 m/min).

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	High Carbon Steel (C with a content over 0.45%)[○]	0.5 ～ 1.75	High-speed steel	Spiral Tap	For through hole	5P	TiN	Available	46 ～ 82

  From: ₹ 1,607.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Spiral Pointed Taps, Coated_LS-PO-V

  YAMAWA MFG

  * LS-N-PO-V will switch to LS-PO-V as soon as the stock runs out.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	High Carbon Steel (C with a content over 0.45%)[○]	0.5 ～ 1.75	High-speed steel	Point tap	For through hole	5P	TiN	Available	100 ～ 150

  From: ₹ 2,412.22
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Taper Pipe Threads Short (ℓg) Type_SP-S-PT

  YAMAWA MFG

  A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1'-11 ～ 3/8-19	Taper for Pipe	High Carbon Steel (C with a content over 0.45%)[○]	-	High-speed steel	Tap for pipes	For blind hole	2.5P	-	NA	55 ～ 120

  From: ₹ 2,359.33
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for High Speed Tapping, Through Hole Use (with LH Spiral Flutes)_F-SL

  YAMAWA MFG

  Enables high speed machining of 20 m/min to 30 m/min. Use at medium to low speeds of 15 m/min or lower will cause the shape and discharge of the chips to deteriorate, leading to problems.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	High Carbon Steel (C with a content over 0.45%)[○]	0.5 ～ 1.75	High-speed steel	Spiral Tap	For through hole	5P	TiN	Available	46 ～ 82

  From: ₹ 1,934.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for High Speed Tapping_F-SP

  YAMAWA MFG

  Enables high speed machining of 20 m/min to 30 m/min. Use at medium to low speeds of 15 m/min or lower will cause the shape and discharge of the chips to deteriorate, leading to problems.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	High Carbon Steel (C with a content over 0.45%)[○]	0.5 ～ 1.75	High-speed steel	Spiral Tap	For blind hole	2.5P	TiN	Available	46 ～ 82

  From: ₹ 1,934.05
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Spiral Fluted Taps, Deep Hole Use_S-SP

  YAMAWA MFG

  Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
  [Features]
  · Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.
  · Oxide treatment (OX treatment) applied to prevent welding.
  [Applications]
  · Optimal for deep thread machining to 2.5 times the nominal diameter or more.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M45	Meter	High Carbon Steel (C with a content over 0.45%)[○]	0.4 ～ 4.5	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	42 ～ 180

  From: ₹ 881.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Fluted Taps for Tough Stainless Steels_SU2-SP

  YAMAWA MFG

  Ideal for pilot hole drilling of difficult-to-cut stainless steel such as SUS316 and SUS317.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M24	Meter	High Carbon Steel (C with a content over 0.45%)[○]	0.5 ～ 3	High-speed steel	Spiral Tap	For blind hole	3P	-	NA	46 ～ 120

  From: ₹ 975.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Steels, for Dry Tapping and for UltraHigh Speed Tapping, Through Hole Use (with LH Spiral Fluted)_HDISL

  YAMAWA MFG

  [Features]
  · Ultra-high-speed machining and mist or dry machining is possible with a side through-hole shape adopted.
  · Suitable for through-holes in cast aluminum, can be used both horizontally and vertically, and can be used for dry machining and ultra-high speed machining.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M6 ～ M20	Meter	High Carbon Steel (C with a content over 0.45%)[○]	1 ～ 1.75	Cobalt HSS	Spiral Tap	For through hole	5P	TiCN	Available	62 ～ 105

  From: ₹ 2,354.73
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Steels_HFIHS

  YAMAWA MFG

  Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Also suitable for vertical machining of blind holes in materials such as carbon steel and alloy steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M6 ～ M20	Meter	High Carbon Steel (C with a content over 0.45%)[○]	1 ～ 1.75	Cobalt HSS	Spiral Tap	For blind hole	2.5P	TiCN	Available	62 ～ 105

  From: ₹ 2,354.73
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Thread Mills for Metric Internal Threads_MC-HLC

  YAMAWA MFG

  A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1015 ～ 32506N300M	Meter / Taper for Pipe / Parallel for Pipes	High Carbon Steel (C with a content over 0.45%)[○]	-	Cobalt HSS	Thread cutter	-	-	TiN	Available	70 ～ 200

  From: ₹ 27,168.24
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Torqueless Roll Taps with Short Chamfer_SC-TL-RZ

  YAMAWA MFG

  The number of chamfer threads is just 1, creating a roll tap with specially shaped threading parts for achieving low torque use.

  • Volume Discount

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1 ～ M6	Meter	High Carbon Steel (C with a content over 0.45%)[○]	0.2 ～ 1	Powder high-speed steel	Roll tap	For blind hole	1P	TiCN	Available	36 ～ 62

  From: ₹ 2,068.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Stainless Steels, Deep Hole Use_SU-S-SP

  YAMAWA MFG

  [Features]
  · For blind hole processing in materials with high hardening properties and extreme viscosity such as stainless steel, chrome steel and molybdenum steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M20	Meter	High Carbon Steel (C with a content over 0.45%)[○]	0.5 ～ 2.5	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	46 ～ 105

  From: ₹ 1,149.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps_SP

  YAMAWA MFG

  The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.
  [Features]
  ・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.
  ・ Intermittent cutting of female threads with keyway is also possible.
  ・ Capable of machining both synchronously and asynchronously.
  ・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.
  ・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.
  ・ The tap can easily cut.
  ・ Intermittent cutting of pilot holes with keyway is also possible.
  ・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.
  [Applications]
  ・ Ideal for machining blind holes.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1 1/4	Whitworth	High Carbon Steel (C with a content over 0.45%)[○]	7	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	145

  From: ₹ 18,522.93
  Days to Ship: 5 Day(s)

  5 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Titanium Alloys_ZET-B

  YAMAWA MFG

  A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M20	Meter	High Carbon Steel (C with a content over 0.45%)[○]	0.5 ～ 2.5	Powder high-speed steel	Spiral Tap	For blind hole	3P	-	NA	46 ～ 105

  From: ₹ 1,419.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Pointed Taps for Nickel Base Alloys_ZEN-P

  YAMAWA MFG

  A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M20	Meter	High Carbon Steel (C with a content over 0.45%)[○]	0.5 ～ 2.5	Powder high-speed steel	Point tap	For through hole	4.5P	-	NA	46 ～ 105

  From: ₹ 1,453.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Nickel Base Alloys_ZEN-B

  YAMAWA MFG

  A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M20	Meter	High Carbon Steel (C with a content over 0.45%)[○]	0.5 ～ 2.5	Powder high-speed steel	Spiral Tap	For blind hole	3P	-	NA	46 ～ 105

  From: ₹ 1,453.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Plus Series Spiral Fluted Taps_+SP

  YAMAWA MFG

  A spiral tap suitable for medium- to high-speed machining with machining centers, etc.
  [Features]
  · Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
  [Applications]
  · Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M6	Meter	High Carbon Steel (C with a content over 0.45%)[○]	0.4 ～ 1	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	42 ～ 62

  From: ₹ 769.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP

  YAMAWA MFG

  Coated spiral tap that can machine at medium to high speed for a wide range of work materials.
  [Features]
  · A special shape (BLF shape) is adopted for the thread component. Several threads are totally left untouched while the remaining half of the threads are chamfered.
  · Completely threaded to prevent the blade from chipping.
  · Reduction of friction resistance and tapping torque.
  · Maintains screw guidance (stable machining).
  · Maintains excellent chip discharge performance (smooth discharge).
  [Applications]
  · Supports machining of a wide range of work materials such as alloy steel, high carbon steel, medium carbon steel, low carbon steel, etc.
  · Ideal for water soluble cutting fluids.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M12	Meter	High Carbon Steel (C with a content over 0.45%)[○]	0.4 ～ 1.75	High-speed steel	Spiral Tap	For blind hole	2.5P	TiN	Available	42 ～ 82

  From: ₹ 1,606.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Spiral Fluted Taps, Coated_LS-SP-V

  YAMAWA MFG

  * LS-N-SP-V will switch to LS-SP-V as soon as the stock runs out.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M12	Meter	High Carbon Steel (C with a content over 0.45%)[○]	0.5 ～ 1.75	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	100 ～ 150

  From: ₹ 2,444.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hand Taps for Taper Pipe Threads Short (ℓg) Type_S-PT

  YAMAWA MFG

  A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1'-11 ～ 3/8-19	Taper for Pipe	High Carbon Steel (C with a content over 0.45%)[○]	-	High-speed steel	Tap for pipes	For through hole / For blind hole	2.5P	-	NA	55 ～ 155

  From: ₹ 1,946.20
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Fluted Taps for High Carbon Steels_HC+SP

  YAMAWA MFG

  It is suitable for tapping high carbon steel such as S55C.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1/2W12 ～ M30	Meter / Whitworth	High Carbon Steel (C with a content over 0.45%)[○]	0.5 ～ 3	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	46 ～ 135

  From: ₹ 735.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for High Carbon Steels, Oxidized_HC+SP-OX

  YAMAWA MFG

  It is suitable for tapping high carbon steel such as S55C. Has undergone oxidation treatment.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M3 ～ M16	Meter	High Carbon Steel (C with a content over 0.45%)[○]	0.5 ～ 2	High-speed steel	Spiral Tap	For blind hole	2.5P	-	NA	46 ～ 95

  From: ₹ 754.44
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Spiral Pointed Taps for High Carbon Steels_HC+PO

  YAMAWA MFG

  It is suitable for tapping high carbon steel such as S55C.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M1.4 ～ M24	Meter	High Carbon Steel (C with a content over 0.45%)[○]	0.3 ～ 3	High-speed steel	Point tap	For through hole	5P	-	NA	36 ～ 120

  From: ₹ 735.76
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Spiral Pointed Taps for Deep Hole Use_S-PO

  YAMAWA MFG

  A tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
  [Features]
  · Short thread length gives low frictional resistance.
  · Good supply of cutting oil is effective for deep thread machining to 2.5 times the nominal diameter or more.
  · Oxide treatment (OX treatment) applied to prevent welding.
  [Applications]
  · Optimal for deep thread machining to 2.5 times the nominal diameter or more.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M2 ～ M42	Meter	High Carbon Steel (C with a content over 0.45%)[○/◎]	0.4 ～ 4.5	High-speed steel	Point tap	For through hole	5P	-	NA	42 ～ 175

  From: ₹ 849.15
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Thread Mills for Metric Internal Threads_MC-CSLC

  YAMAWA MFG

  A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  06510X28R ～ 200505N300M	Meter / Taper for Pipe / Parallel for Pipes	High Carbon Steel (C with a content over 0.45%)[○]	0.5 ～ 3	Carbide	Thread cutter	For through hole / For blind hole	-	TiAlN	Available	50 ～ 140

  From: ₹ 28,926.85
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Interrupted Taps for Taper Pipe Threads, Long (ℓg) Type_INT-PT

  YAMAWA MFG

  [Features]
  · Tap that reduces cutting torque by removing 1 thread per land with loose leftward twist.
  · It is a tap particularly suitable for thread processing of viscous materials such as stainless steel and chrome molybdenum steel.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  1/2-14	Taper for Pipe	High Carbon Steel (C with a content over 0.45%)[○]	-	High-speed steel	Tap for pipes	For through hole	3P	-	NA	80

  From: ₹ 10,752.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SU Roll Taps_SURZ

  YAMAWA MFG

  [Features]
  · A special shape is adopted for the base of the tap pits that enables the female thread internal diameter shape to be controlled.
  · The part of the tap that sticks out (protrudes) adopts a special shape that realizes low torque.
  · Demonstrates effectiveness for roll tap machining of stainless steel.
  · Adjusting the pilot hole diameter enables the female thread internal diameter shape to be adjusted.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  No.2 ～ M3	Meter / unified	High Carbon Steel (C with a content over 0.45%)[◎]	0.2 ～ 56	Powder high-speed steel	Roll tap	For blind hole	2P	Other	Available	36 ～ 52

  From: ₹ 2,192.71
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spiral Fluted Taps for Carbon Steels of Medium Hardness,Through Hole Use (with LH Spiral Flutes)_MHSL-J

  YAMAWA MFG

  [Features]
  · Ideal for S48C to S55C forged products and tempered materials (20 to 30 HRC).
  · Realizes longer life by adopting a special coating and high-speed steel material for abrasion resistance.
  · Adopts an original groove shape that realizes stable scrap discharge at medium speeds.
  · Improves the surface roughness of female threads.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  M6 ～ M16	Meter	High Carbon Steel (C with a content over 0.45%)[◎]	1 ～ 1.75	Cobalt HSS	Spiral Tap	For through hole	5P ～ 7P	Other	Available	62 ～ 95

  From: ₹ 1,560.03
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Z-PROPremium Thread Mills_PRML

  YAMAWA MFG

  [Features]
  · Dedicated tool for female thread machining.

  Screw size (Nominal)	Screw Types	work material	Pitch (P), Number of Threading(mm)	Tool Material Type	Tap Type	Hole type	Chamfer threads (Lcf)	Coating Type	Coating Y/N	Overall Length (L)(mm)
  3.5 ～ 9	Meter	High Carbon Steel (C with a content over 0.45%)[○]	0.75 ～ 1.75	Carbide	Thread cutter	-	-	Other	Available	-

  From: ₹ 9,318.56
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

Brand
Product Series
From
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG
Product Series	Hand Taps_HT	Roll Taps for Dry Tapping, Coated_OL+RZ	High Performance Roll Taps, Coated_HP+RZ	Long Shank Spiral Fluted Taps_LS-SP	Long Shank Hand Taps for Taper Pipe Threads Long (ℓg) Type_LS-PT	Spiral Pointed Taps for Hard-to-Machine Materials_EH-PO	Spiral Pointed Taps for Stainless Steels_SU+PO	Roll Taps, Coated_R+V	Hand Taps for Left Hand Threads_HT-LH	Spiral Pointed Taps for Left Hand Threads_PO-V	For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Steels_HDISP	For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Steels_HFISP	Spiral Fluted Taps for Stainless Steels_SU+SP	Spiral Fluted Taps for Stainless Steels, Through Hole Use（with LH Spiral Flutes）_SU+SL	Spiral Fluted Taps, Coated, Through Hole Use（with LH Spiral Flutes）_AU+SL	Long Shank Spiral Pointed Taps, Coated_LS-PO-V	Spiral Fluted Taps for Taper Pipe Threads Short (ℓg) Type_SP-S-PT	Spiral Fluted Taps for High Speed Tapping, Through Hole Use (with LH Spiral Flutes)_F-SL	Spiral Fluted Taps for High Speed Tapping_F-SP	Short Spiral Fluted Taps, Deep Hole Use_S-SP	Spiral Fluted Taps for Tough Stainless Steels_SU2-SP	Spiral Fluted Taps for Steels, for Dry Tapping and for UltraHigh Speed Tapping, Through Hole Use (with LH Spiral Fluted)_HDISL	For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Steels_HFIHS	Thread Mills for Metric Internal Threads_MC-HLC	Torqueless Roll Taps with Short Chamfer_SC-TL-RZ	Spiral Fluted Taps for Stainless Steels, Deep Hole Use_SU-S-SP	Spiral Fluted Taps_SP	Spiral Fluted Taps for Titanium Alloys_ZET-B	Spiral Pointed Taps for Nickel Base Alloys_ZEN-P	Spiral Fluted Taps for Nickel Base Alloys_ZEN-B	Plus Series Spiral Fluted Taps_+SP	Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP	Long Shank Spiral Fluted Taps, Coated_LS-SP-V	Hand Taps for Taper Pipe Threads Short (ℓg) Type_S-PT	Spiral Fluted Taps for High Carbon Steels_HC+SP	Spiral Fluted Taps for High Carbon Steels, Oxidized_HC+SP-OX	Spiral Pointed Taps for High Carbon Steels_HC+PO	Short Spiral Pointed Taps for Deep Hole Use_S-PO	Carbide Thread Mills for Metric Internal Threads_MC-CSLC	Interrupted Taps for Taper Pipe Threads, Long (ℓg) Type_INT-PT	SU Roll Taps_SURZ	Spiral Fluted Taps for Carbon Steels of Medium Hardness,Through Hole Use (with LH Spiral Flutes)_MHSL-J	Z-PROPremium Thread Mills_PRML
From	-	₹ 1,814.64-	₹ 1,814.64-	₹ 1,801.45-	₹ 4,023.73-	₹ 1,036.65-	₹ 881.29-	₹ 1,701.49-	₹ 1,434.45-	₹ 1,684.93-	₹ 2,354.73-	₹ 2,354.73-	₹ 869.67-	₹ 873.05-	₹ 1,607.02-	₹ 2,412.22-	₹ 2,359.33-	₹ 1,934.05-	₹ 1,934.05-	₹ 881.29-	₹ 975.05-	₹ 2,354.73-	₹ 2,354.73-	₹ 27,168.24-	₹ 2,068.00-	₹ 1,149.16-	₹ 18,522.93	₹ 1,419.73-	₹ 1,453.22-	₹ 1,453.22-	₹ 769.36-	₹ 1,606.31-	₹ 2,444.36-	₹ 1,946.20-	₹ 735.73-	₹ 754.44-	₹ 735.76-	₹ 849.15-	₹ 28,926.85-	₹ 10,752.80	₹ 2,192.71-	₹ 1,560.03-	₹ 9,318.56-
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s)	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more
Screw size (Nominal)	No.0 ～ M48	No.10 ～ M6	No.10-32UNF ～ M20	1 ～ M36	1 ～ 3/8	M3 ～ M24	No.10 ～ M42	M1 ～ M6	M2.5 ～ M8	M3 ～ M12	M6 ～ M20	M6 ～ M20	No.10 ～ M45	M3 ～ M6	M3 ～ M12	M3 ～ M12	1'-11 ～ 3/8-19	M3 ～ M12	M3 ～ M12	M2 ～ M45	M3 ～ M24	M6 ～ M20	M6 ～ M20	1015 ～ 32506N300M	M1 ～ M6	M3 ～ M20	1 1/4	M3 ～ M20	M3 ～ M20	M3 ～ M20	M2 ～ M6	M2 ～ M12	M3 ～ M12	1'-11 ～ 3/8-19	1/2W12 ～ M30	M3 ～ M16	M1.4 ～ M24	M2 ～ M42	06510X28R ～ 200505N300M	1/2-14	No.2 ～ M3	M6 ～ M16	3.5 ～ 9
Screw Types	Meter / unified / Sewing Machine	Meter / unified	Meter / unified	Meter / unified / Whitworth	Taper for Pipe	Meter	Meter / unified / Whitworth	Meter	Meter	Meter	Meter	Meter	Meter / unified / Whitworth	Meter	Meter	Meter	Taper for Pipe	Meter	Meter	Meter	Meter	Meter	Meter	Meter / Taper for Pipe / Parallel for Pipes	Meter	Meter	Whitworth	Meter	Meter	Meter	Meter	Meter	Meter	Taper for Pipe	Meter / Whitworth	Meter	Meter	Meter	Meter / Taper for Pipe / Parallel for Pipes	Taper for Pipe	Meter / unified	Meter	Meter
work material	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○/◎]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[◎]	High Carbon Steel (C with a content over 0.45%)[◎]	High Carbon Steel (C with a content over 0.45%)[○]
Pitch (P), Number of Threading(mm)	0.2 ～ 100	0.25 ～ 64	0.25 ～ 1.75	1 ～ 24	11 ～ 28	0.5 ～ 3	0.3 ～ 56	0.25 ～ 1	0.45 ～ 0.75	0.5 ～ 1.75	1 ～ 1.75	1 ～ 1.75	0.3 ～ 56	0.5 ～ 1	0.5 ～ 1.75	0.5 ～ 1.75	-	0.5 ～ 1.75	0.5 ～ 1.75	0.4 ～ 4.5	0.5 ～ 3	1 ～ 1.75	1 ～ 1.75	-	0.2 ～ 1	0.5 ～ 2.5	7	0.5 ～ 2.5	0.5 ～ 2.5	0.5 ～ 2.5	0.4 ～ 1	0.4 ～ 1.75	0.5 ～ 1.75	-	0.5 ～ 3	0.5 ～ 2	0.3 ～ 3	0.4 ～ 4.5	0.5 ～ 3	-	0.2 ～ 56	1 ～ 1.75	0.75 ～ 1.75
Tool Material Type	High-speed steel	Powder high-speed steel	Powder high-speed steel	High-speed steel	High-speed steel	Cobalt HSS	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Cobalt HSS	Cobalt HSS	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	High-speed steel	High-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Carbide	High-speed steel	Powder high-speed steel	Cobalt HSS	Carbide
Tap Type	Hand Tap	Roll tap	Roll tap	Spiral Tap	Tap for pipes	Point tap	Point tap	Roll tap	Hand Tap	Point tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Point tap	Tap for pipes	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Thread cutter	Roll tap	Spiral Tap	Spiral Tap	Spiral Tap	Point tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Tap for pipes	Spiral Tap	Spiral Tap	Point tap	Point tap	Thread cutter	Tap for pipes	Roll tap	Spiral Tap	Thread cutter
Hole type	For through hole / For blind hole	For through hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For through hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole	For through hole	For through hole	For blind hole	For through hole	For blind hole	For blind hole	For blind hole	For through hole	For blind hole	-	For blind hole	For blind hole	For blind hole	For blind hole	For through hole	For blind hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole	For through hole	For through hole / For blind hole	For through hole	For blind hole	For through hole	-
Chamfer threads (Lcf)	1.5P ～ 5P	4P	2P ～ 4P	2.5P	2.5P	4.5P	5P	2P ～ 4P	5P	5P	2.5P	2.5P	2.5P	5P	5P	5P	2.5P	5P	2.5P	2.5P	3P	5P	2.5P	-	1P	2.5P	2.5P	3P	4.5P	3P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	5P	5P	-	3P	2P	5P ～ 7P	-
Coating Type	-	TiCN	TiCN	-	-	-	-	TiN	-	TiN	TiCN	TiCN	-	-	TiN	TiN	-	TiN	TiN	-	-	TiCN	TiCN	TiN	TiCN	-	-	-	-	-	-	TiN	-	-	-	-	-	-	TiAlN	-	Other	Other	Other
Coating Y/N	NA	Available	Available	NA	NA	NA	NA	Available	NA	Available	Available	Available	NA	NA	Available	Available	NA	Available	Available	NA	NA	Available	Available	Available	Available	NA	NA	NA	NA	NA	NA	Available	NA	NA	NA	NA	NA	NA	Available	NA	Available	Available	Available
Overall Length (L)(mm)	36 ～ 185	36 ～ 62	36 ～ 105	100 ～ 300	100 ～ 200	46 ～ 120	36 ～ 175	36 ～ 62	46 ～ 70	46 ～ 82	62 ～ 105	62 ～ 105	36 ～ 180	46 ～ 62	46 ～ 82	100 ～ 150	55 ～ 120	46 ～ 82	46 ～ 82	42 ～ 180	46 ～ 120	62 ～ 105	62 ～ 105	70 ～ 200	36 ～ 62	46 ～ 105	145	46 ～ 105	46 ～ 105	46 ～ 105	42 ～ 62	42 ～ 82	100 ～ 150	55 ～ 155	46 ～ 135	46 ～ 95	36 ～ 120	42 ～ 175	50 ～ 140	80	36 ～ 52	62 ～ 95	-

Loading...