• You can add up to 6 items per a category to the compare list. Compare

  

  Plastic Parts GAP-8FN

  TMEHJAPAN

  A plastic spacer for eliminating height differentials with the joint section when mounting shelf boards in pipe rack systems.
  [Features]
  · As well as eliminating height differentials, the flat section also sits onto the surface below, allowing it to receive ever wider surface areas.
  · Available in ivory (color) or gray.
  [Applications]
  · As a spacer for mounting boards and other flat objects.
  · Preventing middle pieces from bending or warping when mounting shelf boards and top shelf boards.

  Mounting Method	Surface Treatment	Type	Joint Type	Material	Applicable Pipe Dia.(φ),(Squre)	Corner Type	Intermediate/Corner Type	Intermediate Joint Type	Accessory Type	Operating Environment
  -	-	Accessories	-	-	-	-	-	-	Locating and Guide Components	-

  From: ₹ 104.01
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Metal Joint GA-15H

  TMEHJAPAN

  A metal joint used for mounting flat pieces such as boards to pipes.
  [Features]
  · Unlike with the GA-15S and GA-15D, the mounting hole is not a long hole but a round hole with a diameter of 10 mm.
  *The mounting bolts and nuts must be acquired separately.
  [Applications]
  · Ideal for mounting flat objects such as boards to pipes.

  Mounting Method	Surface Treatment	Type	Joint Type	Material	Applicable Pipe Dia.(φ),(Squre)	Corner Type	Intermediate/Corner Type	Intermediate Joint Type	Accessory Type	Operating Environment
  Screw-Fixed Type	Cathodic Electrodeposition Coating / Chrome Plating	Metal Joint	Center	Resin	-	-	-	Through	-	Standard

  From: ₹ 660.91
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Metal Joint GA-45S

  TMEHJAPAN

  4 variations of metal joint available.
  [Features]
  · Materials: steel.
  · Mass: 152 g.
  

  Mounting Method	Surface Treatment	Type	Joint Type	Material	Applicable Pipe Dia.(φ),(Squre)	Corner Type	Intermediate/Corner Type	Intermediate Joint Type	Accessory Type	Operating Environment
  Screw-Fixed Type	Cathodic Electrodeposition Coating	Metal Joint	Center	Resin	-	-	-	Angled	-	Standard

  From: ₹ 760.73
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Metal Joint GA-65S

  TMEHJAPAN

  A metal joint for mounting cylindrical rods to piping in pipe systems.
  [Features]
  · Enables easy mounting of cylindrical rod‑shaped objects with a diameter of around 5 mm to pipes.
  · Available in black or silver.
  [Applications]
  · Used when mounting objects such as grid type metal meshes and meshed panels to pipes.

  Mounting Method	Surface Treatment	Type	Joint Type	Material	Applicable Pipe Dia.(φ),(Squre)	Corner Type	Intermediate/Corner Type	Intermediate Joint Type	Accessory Type	Operating Environment
  Screw-Fixed Type	Cathodic Electrodeposition Coating	Metal Joint	Center	Resin	-	-	-	Through	-	Standard

  From: ₹ 707.60
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Safety Cap For ARG-4030BL

  TMEHJAPAN

  A protective cap for use at the cut end of aluminum workpiece guide.
  [Features]
  · Mount on the cut end of the ARG-4030BL aluminum workpiece guide to protect against injury.
  · Two ASC-V30 and one ASC-H42L / ASC-H42R are required at both ends of a single workpiece guide.
  [Applications]
  · Ideal when using the ARG-4030BL.

  Mounting Method	Surface Treatment	Type	Joint Type	Material	Applicable Pipe Dia.(φ),(Squre)	Corner Type	Intermediate/Corner Type	Intermediate Joint Type	Accessory Type	Operating Environment
  -	-	Accessories	-	-	-	-	-	-	Locating and Guide Components	-

  From: ₹ 50.01
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tool Cap TC-28

  TMEHJAPAN

  An urethane cap with drill hole for mounting to pipe ends.
  [Features]
  · Features a 19-mm drill hole at the center of the urethane cap.
  · Can be mounted to all pipes with a diameter of ø28.
  · Covers the cut end of the pipe to help protect against injury.
  [Applications]
  · Ideal when inserting tools or markers into pipes.
  · Ideal for preventing damage to cords or other objects when passing them through pipes.

  Mounting Method	Surface Treatment	Type	Joint Type	Material	Applicable Pipe Dia.(φ),(Squre)	Corner Type	Intermediate/Corner Type	Intermediate Joint Type	Accessory Type	Operating Environment
  -	-	Accessories	-	-	-	-	-	-	Cap (End)	-

  From: ₹ 180.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder for Impact Screwdriver

  TMEHJAPAN

  A holder for impact drivers.
  [Features]
  · Mount to a pipe rack system using the GA-1S Metal Joint to hold your impact driver.
  · Simply insert your impact driver to hold it. This also makes it easy to take out.
  · Available either in a cylindrical shape or in a cut-away shape. Also available in nylon or steel.
  · Some impact drivers from certain manufacturers may not be held stably.
  [Applications]
  · Used when you want to hold impact drivers in a manner that makes them easy to retrieve.
  · Used by mounting to tool or storage benches.

  Mounting Method	Surface Treatment	Type	Joint Type	Material	Applicable Pipe Dia.(φ),(Squre)	Corner Type	Intermediate/Corner Type	Intermediate Joint Type	Accessory Type	Operating Environment
  -	-	Accessories	-	-	-	-	-	-	Bracket, Holder	-

  From: ₹ 939.69
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hanging Hook L PH-D

  TMEHJAPAN

  A straight hook for hanging tools with hook holes in them.
  [Features]
  · Can be easily mounted to pipe racks and its position and mounting position fixed.
  · The hook is made of stainless steel and so does not easily rust, even in places where water is ever present.
  [Applications]
  · Used to hang and manage items such as tools on structures built using a pipe rack system.
  · Insert numbered cards and the like to store them.

  Mounting Method	Surface Treatment	Type	Joint Type	Material	Applicable Pipe Dia.(φ),(Squre)	Corner Type	Intermediate/Corner Type	Intermediate Joint Type	Accessory Type	Operating Environment
  -	-	Accessories	-	-	-	-	-	-	Hook, Hanger	-

  From: ₹ 701.58
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hanging Hook U PH-C

  TMEHJAPAN

  A U-shaped hook for hanging tools that have cords.
  [Features]
  · Can be easily mounted to pipe racks and its position and mounting position fixed.
  · The hook is made of stainless steel and so does not easily rust, even in places where water is ever present.
  [Applications]
  · Ideal for hanging and managing items such as cleaning tools on racks built using a pipe rack system.

  Mounting Method	Surface Treatment	Type	Joint Type	Material	Applicable Pipe Dia.(φ),(Squre)	Corner Type	Intermediate/Corner Type	Intermediate Joint Type	Accessory Type	Operating Environment
  -	-	Accessories	-	-	-	-	-	-	Hook, Hanger	-

  From: ₹ 833.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Step-Adjusting Fixture DK-5

  TMEHJAPAN

  A ladder-shaped fixture for adjusting the height of steps/stages.
  [Features]
  · Change the height of steps/stages by mounting 4 of these fixtures (2 at the back and 2 at the front).
  · The height can be raised or lowered at a pitch of 50 mm.
  · Inclines can be applied by changing the height individually at the front or back respectively.
  · To mount a single Step-Adjusting Fixture, 4 pcs of G-7AS, 2 sets of BN06 and 4 pcs of M8 nuts are required.
  [Applications]
  · Used when you want to have an easy way to change the height of work benches or shelves.

  Mounting Method	Surface Treatment	Type	Joint Type	Material	Applicable Pipe Dia.(φ),(Squre)	Corner Type	Intermediate/Corner Type	Intermediate Joint Type	Accessory Type	Operating Environment
  -	-	Accessories	-	-	-	-	-	-	Hook, Hanger	-

  From: ₹ 2,399.85
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Absorber Bracket A28-A301

  TMEHJAPAN

  [Features]
  ・ Accessory used when mounting the absorber AB30 to a pipe.

  Mounting Method	Surface Treatment	Type	Joint Type	Material	Applicable Pipe Dia.(φ),(Squre)	Corner Type	Intermediate/Corner Type	Intermediate Joint Type	Accessory Type	Operating Environment
  Screw-Fixed Type	Clear Anodize	Metal Joint	Center	-	-	-	-	Through	-	Standard

  From: ₹ 536.97
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  BA280LA/BA280LB (Formerly BA2800A/BA2800B) For Bushing Aluminum Pipe

  TMEHJAPAN

  Insert nut for mounting adjuster bolt or bolt type caster to aluminum pipe.
  [Features]
  ・ Strike at the pipe end with a hammer and insert.
  ・ Available for inch screw (A type) and metric screw (B type) threads.
  ・ Be careful in selection, since these correspond to the pipes used.
  [Applications]
  ・ Necessary when mounting the adjuster bolt.
  ・ Necessary when mounting the bolt type caster.

  Mounting Method	Surface Treatment	Type	Joint Type	Material	Applicable Pipe Dia.(φ),(Squre)	Corner Type	Intermediate/Corner Type	Intermediate Joint Type	Accessory Type	Operating Environment
  -	-	Part for Terminal	-	-	-	-	-	-	Cap (End)	-

  From: ₹ 402.25
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cylinder Boss SC-2845

  TMEHJAPAN

  [Features]
  ・ When using a cylinder, metal joints can easily be connected.

  Mounting Method	Surface Treatment	Type	Joint Type	Material	Applicable Pipe Dia.(φ),(Squre)	Corner Type	Intermediate/Corner Type	Intermediate Joint Type	Accessory Type	Operating Environment
  -	-	Part for Terminal	-	-	-	-	-	-	Cap (End)	-

  From: ₹ 1,796.14
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slide Support GS-F

  TMEHJAPAN

  [Features]
  ・ When mounting the SG-28A, the pipe support can protect the notch.

  Mounting Method	Surface Treatment	Type	Joint Type	Material	Applicable Pipe Dia.(φ),(Squre)	Corner Type	Intermediate/Corner Type	Intermediate Joint Type	Accessory Type	Operating Environment
  -	-	Part for Terminal	-	-	-	-	-	-	Cap (End)	Standard

  From: ₹ 929.72
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Roller Conveyor Pulley RCP-32A

  TMEHJAPAN

  [Features]
  ・ Mounted to a roller conveyor pipe, the rollers can rotate in tandem when connected by urethane rubber.

  Mounting Method	Surface Treatment	Type	Joint Type	Material	Applicable Pipe Dia.(φ),(Squre)	Corner Type	Intermediate/Corner Type	Intermediate Joint Type	Accessory Type	Operating Environment
  -	-	Accessories	-	-	-	-	-	-	Pulley, Pulley Unit	Standard

  From: ₹ 252.85
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Metal Joint Single Item G-65S

  TMEHJAPAN

  [Features]
  · Unique design. Embossed.
  · Has a high retention force and is resistant to slipping, even on unprocessed pipes.
  · No resin coating required on pipes.
  · Increases joint strength by approximately 37.5% on resin pipes.
  · Can be used on existing resin pipes in combination with existing joints.
  · Single fitting from the Metal Joint Set GA-65S.
  · For mounting ø4 to 5 wire meshes, etc.

  Mounting Method	Surface Treatment	Type	Joint Type	Material	Applicable Pipe Dia.(φ),(Squre)	Corner Type	Intermediate/Corner Type	Intermediate Joint Type	Accessory Type	Operating Environment
  Screw-Fixed Type	Cathodic Electrodeposition Coating / Chrome Plating	Metal Joint	Single Item	Resin	28	-	-	-	-	Standard

  From: ₹ 195.21
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Metal Joint Single Item G-15D

  TMEHJAPAN

  [Features]
  · Unique design. Embossed.
  · Has a high retention force and is resistant to slipping, even on unprocessed pipes.
  · No resin coating required on pipes.
  · Increases joint strength by approximately 37.5% on resin pipes.
  · Can be used on existing resin pipes in combination with existing joints.
  · Single fitting from the Metal Joint Set GA-15D.
  · For mounting accessories, etc.

  Mounting Method	Surface Treatment	Type	Joint Type	Material	Applicable Pipe Dia.(φ),(Squre)	Corner Type	Intermediate/Corner Type	Intermediate Joint Type	Accessory Type	Operating Environment
  Screw-Fixed Type	Chrome Plating	Metal Joint	Single Item	Resin	28	-	-	-	-	Standard

  From: ₹ 181.97
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

Brand
Product Series
From
Days to Ship
Mounting Method
Surface Treatment
Type
Joint Type
Material
Applicable Pipe Dia.(φ),(Squre)
Corner Type
Intermediate/Corner Type
Intermediate Joint Type
Accessory Type
Operating Environment

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	TMEHJAPAN	TMEHJAPAN	TMEHJAPAN	TMEHJAPAN	TMEHJAPAN	TMEHJAPAN	TMEHJAPAN	TMEHJAPAN	TMEHJAPAN	TMEHJAPAN	TMEHJAPAN	TMEHJAPAN	TMEHJAPAN	TMEHJAPAN	TMEHJAPAN	TMEHJAPAN	TMEHJAPAN
Product Series	Plastic Parts GAP-8FN	Metal Joint GA-15H	Metal Joint GA-45S	Metal Joint GA-65S	Safety Cap For ARG-4030BL	Tool Cap TC-28	Holder for Impact Screwdriver	Hanging Hook L PH-D	Hanging Hook U PH-C	Step-Adjusting Fixture DK-5	Absorber Bracket A28-A301	BA280LA/BA280LB (Formerly BA2800A/BA2800B) For Bushing Aluminum Pipe	Cylinder Boss SC-2845	Slide Support GS-F	Roller Conveyor Pulley RCP-32A	Metal Joint Single Item G-65S	Metal Joint Single Item G-15D
From	₹ 104.01	₹ 660.91	₹ 760.73	₹ 707.60	₹ 50.01	₹ 180.00	₹ 939.69	₹ 701.58	₹ 833.60	₹ 2,399.85	₹ 536.97	₹ 402.25-	₹ 1,796.14	₹ 929.72	₹ 252.85	₹ 195.21	₹ 181.97
Days to Ship	5 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Mounting Method	-	Screw-Fixed Type	Screw-Fixed Type	Screw-Fixed Type	-	-	-	-	-	-	Screw-Fixed Type	-	-	-	-	Screw-Fixed Type	Screw-Fixed Type
Surface Treatment	-	Cathodic Electrodeposition Coating / Chrome Plating	Cathodic Electrodeposition Coating	Cathodic Electrodeposition Coating	-	-	-	-	-	-	Clear Anodize	-	-	-	-	Cathodic Electrodeposition Coating / Chrome Plating	Chrome Plating
Type	Accessories	Metal Joint	Metal Joint	Metal Joint	Accessories	Accessories	Accessories	Accessories	Accessories	Accessories	Metal Joint	Part for Terminal	Part for Terminal	Part for Terminal	Accessories	Metal Joint	Metal Joint
Joint Type	-	Center	Center	Center	-	-	-	-	-	-	Center	-	-	-	-	Single Item	Single Item
Material	-	Resin	Resin	Resin	-	-	-	-	-	-	-	-	-	-	-	Resin	Resin
Applicable Pipe Dia.(φ),(Squre)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	28	28
Corner Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Intermediate/Corner Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Intermediate Joint Type	-	Through	Angled	Through	-	-	-	-	-	-	Through	-	-	-	-	-	-
Accessory Type	Locating and Guide Components	-	-	-	Locating and Guide Components	Cap (End)	Bracket, Holder	Hook, Hanger	Hook, Hanger	Hook, Hanger	-	Cap (End)	Cap (End)	Cap (End)	Pulley, Pulley Unit	-	-
Operating Environment	-	Standard	Standard	Standard	-	-	-	-	-	-	Standard	-	-	Standard	Standard	Standard	Standard

Loading...