Due to an increase in demand, the lead time of some of the electrical items from our eCatalogue has increased abnormally and may cause delays in delivery or order suspension. We apologize for the inconvenience and appreciate your kind understanding. Once the supply will get normalized, we will update the same.

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

THK Single Axis Actuators（Cover：Provided）

Brand	(14) (4) IMAO CORPORATION (2) THK (8)
CAD	2D 3D
Days to Ship	All 4 Day(s) or Less 5 Day(s) or Less 6 Day(s) or Less 7 Day(s) or Less 8 Day(s) or Less Others

8 items

Sort By

: 30; 45; 60

You can add up to 6 items per a category to the compare list. Compare

Compact Series SKR20

THK

A compact, high-rigidity and high-precision actuator with an integrated inner block consisting of an LM block and ball screw nut.
In addition, as the housing A/B serves as a support unit and the inner block serves as a table, it is possible to dramatically reduce the steps in designing and assembling.

[Features]
· Arranged to make contact at an angle of 45° such that the load is equal in 4 directions, enabling use in various positions.
· The linear guide is made of 4 rows of circular arced grooves for a highly rigid guide with no cracks.
· Changes to friction resistance due to changes in load are suppressed as far as possible, promoting high-accuracy feeding.
· The U-shaped cross-sectional outer rail improves rigidity against moment and torsion.

[Effects of Using Ball Retainer]
· The grease retention capacity has been improved, allowing long-term maintenance-free operation. (QZ Lubricator is attached to the ball screw.)
· Eliminates mutual friction between balls, reduces torque fluctuation and achieves excellent sliding performance.
· In addition, since the basic dynamic load rating of the LM guide and ball screw is higher than conventional products, it has a long service life.

CAD ：

2D

Days to Ship: 23 Day(s) or more

23 Day(s) or more
You can add up to 6 items per a category to the compare list. Compare

Actuator KR45H

THK

With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab

CAD ：

2D / 3D

Days to Ship: 23 Day(s) or more

23 Day(s) or more
You can add up to 6 items per a category to the compare list. Compare

Actuator SKR33

THK

With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab

CAD ：

2D / 3D

Days to Ship: 23 Day(s) or more

23 Day(s) or more
You can add up to 6 items per a category to the compare list. Compare

Actuator KR26

THK

An actuator with a compact and high-stiffness structure that integrates an LM guide, ball screw, and support unit, making it ideal for high-precision positioning.
[Features]
・ In addition to the standard specifications, the manufacturer will semi-order 5 highly requested customs, and will promptly procure and ship after ordering.
[5 custom made]
・ Dowel holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products.
・ Positioning Metal Bolt: Install the positioning metal bolts for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor.
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover.
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance.
・ AFF grease for clean environment: Encloses clean environment-friendly grease (THK, AFF grease) to suppress dust generation.
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab.

CAD ：

2D / 3D

Days to Ship: 23 Day(s) or more

23 Day(s) or more
You can add up to 6 items per a category to the compare list. Compare

Quick Actuator KR20

THK

With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab

CAD ：

2D / 3D

Days to Ship: 23 Day(s) or more

23 Day(s) or more
You can add up to 6 items per a category to the compare list. Compare

Actuator SKR20

THK

With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab

CAD ：

2D / 3D

Days to Ship: 23 Day(s) or more

23 Day(s) or more
You can add up to 6 items per a category to the compare list. Compare

Quick Delivery Actuator SKR26

THK

With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab

CAD ：

2D / 3D

Days to Ship: 23 Day(s) or more

23 Day(s) or more
You can add up to 6 items per a category to the compare list. Compare

Actuator KR30H

THK

With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab

CAD ：

2D / 3D

Days to Ship: 23 Day(s) or more

23 Day(s) or more

Days to Ship: 23 Day(s) or more

Days to Ship: 23 Day(s) or more

Days to Ship: 23 Day(s) or more

Days to Ship: 23 Day(s) or more

Days to Ship: 23 Day(s) or more

Days to Ship: 23 Day(s) or more

Days to Ship: 23 Day(s) or more

Days to Ship: 23 Day(s) or more


Brand
Product Series
CAD
From
Days to Ship
Nominal (Height)
Accuracy
Lead(mm)
Table
Motor Mounting Orientation
Main Body, Peripheral Components
Cover
With or w/o Motors
Table Length L1(mm)
Grease
Ball Screw Shaft Dia.(Ø)
With or w/o Lubricant Unit
Table Width W1(mm)
Amplifier Voltage
With or w/o Retainer

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	THK	THK	THK	THK	THK	THK	THK	THK
Product Series	Compact Series SKR20	Actuator KR45H	Actuator SKR33	Actuator KR26	Quick Actuator KR20	Actuator SKR20	Quick Delivery Actuator SKR26	Actuator KR30H
CAD	2D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From	-	-	-	-	-	-	-	-
Days to Ship	23 Day(s) or more	23 Day(s) or more	23 Day(s) or more	23 Day(s) or more	23 Day(s) or more	23 Day(s) or more	23 Day(s) or more	23 Day(s) or more
Nominal (Height)	20	45	33	26	20	20	26	30
Accuracy	Standard Grade / High Grade / Precision Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade	Standard Grade
Lead(mm)	1	10 ～ 20	6 ～ 20	2 ～ 6	1 ～ 6	1 ～ 6	2 ～ 6	6 ～ 10
Table	Long 1 pc. / Long 2 pcs.	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs	Long 1 pc. / Long 2 pcs.	Long 1 pc. / Long 2 pcs.	Long 1 pc. / Long 2 pcs.	Long 1 pc. / Long 2 pcs.	Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs
Motor Mounting Orientation	Straight	Straight / Folded	Straight / Folded	Straight / Folded	Straight / Folded	Straight / Folded	Straight / Folded	Straight / Folded
Main Body, Peripheral Components	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body
Cover	Provided	Provided	Provided	Provided	Provided	Provided	Provided	Provided
With or w/o Motors	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)	Not Provided (Installed by customers)
Table Length L1(mm)	33.2	43.5 ～ 81	39.5 ～ 54	47.4	33.2	33.2	47.4	39.5 ～ 54
Grease	Standard	Standard / Low Particle Generation	Standard / Low Particle Generation	Standard / Low Particle Generation	Standard / Low Particle Generation	Standard / Low Particle Generation	Standard / Low Particle Generation	Standard / Low Particle Generation
Ball Screw Shaft Dia.(Ø)	6	15	13	8	6	6	8	10
With or w/o Lubricant Unit	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided
Table Width W1(mm)	52	104	86	62	52	52	62	80
Amplifier Voltage	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided
With or w/o Retainer	Provided	Not Provided	Provided	Not Provided	Not Provided	Provided	Provided	Not Provided