• You can add up to 6 items per a category to the compare list. Compare

  

  Insulation Resistance MeterMG1000

  SANWA ELE INST

  1000V/500V/250V applied voltage with hot-line state detection function, JIScompliant
  
  [Features]
  · Automatic discrimination of measurement line while in a hot-line state.
  · Dust-proof and drip-proof (IP54) design, JISC1302-2002 compliant.
  · Three interchangeable rated voltage ranges when measuring insulation resistance.
  · Automatic discrimination while in a hot-line state using the insulation resistance measuring function.
  · Large, easy-to-read numbers and analog bar graph.
  · Automatic data hold function of last measured values after measurement is complete.
  · LCD with backlight.
  · Automatic discharge function.
  · AC/DC automatic discrimination-type AC/DC600V current measurement function.
  · Continuity buzzer and ALARM lamp linked to a 400 Ω resistance measuring range and a 40 Ω resistance measuring range.

  From: ₹ 31,615.80
  Days to Ship: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Convenient LCR meter

  SANWA ELE INST

  PASS/FAIL discrimination function for device value sorting
  
  [Features]
  · Wide-range measurement DC to 100kHz measurement frequency.
  · Displays various parameters.
  · 2-wire/4-wire measurement.
  · L/C/R/S mode / P auto automatic discrimination measurement possible using the auto LCR function.
  · Sorting mode for simple device identification.
  · Optical link USB interface (optional).
  · Data hold / backlight.
  · Sample rate: 1.2 times/second (LCR mode).
  · 0.5 times/second (DCR mode).
  · Battery life: Approximately 35 hours (auto LCR mode, 1kHz).

  From: ₹ 33,492.47
  Days to Ship: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Digital Multi Meter PC773

  SANWA ELE INST

  Digital Multimeter that can be connected to a PC.
  [Features]
  ・ 11,000 counts, minimum resolution voltage: 0.01 mV, resistance: 0.01 Ω
  ・ Can measure up to 1,000 V AC/DC. Large liquid crystal display with backlight function
  ・ 0.28% maximum accuracy
  ・ Supports true effective value (AC)
  ・ The outer circumference uses an impact-resistant elastomer
  ・ 11 A DC/AC continuous measurement possible
  ・ Continuity check function that the red LED lights at the same time as the buzzer sound
  ・ Data hold, range hold, relative
  ・ Equipped with automatic power off function that operates in approx. 30 minutes (can be canceled)
  ・ Optical link USB interface (optional)
  [Applications]
  ・ Ideal for weak electric circuit analysis, etc.

  From: ₹ 18,151.11
  Days to Ship: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Digital Multi Meter RD700

  SANWA ELE INST

  Multi-functional, measures up to +AC/DC1000V/10A. 1000M Ω high input impedance.
  
  [Features]
  · 4,000 count.
  · 0.3% full accuracy.
  · Condenser capacity measurement. Note: Not suitable for measurement of condensers with large leakage current.
  · Temperature measurement (K type temperature sensor). Note: K-AD accessory required, sold separately. Note: K type temperature sensor K-250PC included.
  · Frequency measurement: Input voltage 20VACrms or less. Input signal: Sine wave or square wave with 40% to 70% duty ratio. Input sensitivity 10Hz to 20kHz: 0.9Vrms and above, 20kHz to 500kHz: 2.6Vp or 1.9Vrms and above, 500kHz to 1MHz: 4.2Vp or 3Vrms and above.
  · ADP (current sensor) dedicated function.
  · MAX recording measurement.
  · Data hold/range hold.
  · Relative value measurement.
  · Auto power off (after approximately 30 minutes) can be canceled.
  · Alarm for when test lead is improperly inserted into the current terminal.
  · Protective holster with wall hanger and test lead holder.
  · Tilt stand.

  From: ₹ 11,336.62
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Digital Multi Meter RD701

  SANWA ELE INST

  Multi-functional, measures up to +AC/DC1000V/10A, as well as RMS
  
  [Features]
  · High input impedance 1000M Ω.
  · 4,000 count.
  · 0.3% full accuracy.
  · True RMS measurement (AC) note: RD701 only.
  · Condenser capacity measurement
  · Note: Not suitable for measurement of condensers with large leakage current.
  · Temperature measurement (K type temperature sensor). Note: K-AD accessory required, sold separately.
  · Note: K type temperature sensor K-250PC included.
  · Frequency measurement.
  · Note: Input voltage: 20VACrms or less.
  · Input signal: Sine wave or square wave with 40% to 70% duty ratio.
  · Input sensitivity: 10Hz to 20kHz: 0.9Vrms and above, : 20kHz to 500kHz: 2.6Vp or 1.9Vrms and above, : 500kHz to 1MHz: 4.2Vp or 3Vrms and above.
  · ADP (current sensor) dedicated function.
  · MAX recording measurement.
  · Data hold/range hold.
  · Relative value measurement.
  · Auto power off (after approximately 30 minutes) can be canceled.
  · Alarm for when test lead is improperly inserted into the current terminal.
  · Protective holster with wall hanger and test lead holder.
  · Tilt stand.

  From: ₹ 13,322.95
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Analog multi-tester SP-18D

  SANWA ELE INST

  Non-removable test lead type with red LED check function
  
  [Features]
  · An integrated case type, ideal for carrying and stowing away.
  · Resistance up to 200MΩ can be measured at low voltages (3 V).
  · 0.01μF to 1,000μF condenser capacity measurement.
  · Resistance measurement by LED check with 3 V terminal voltage.
  · Battery check.
  · Dual function panel screen protective cover that converts to a stand.

  From: ₹ 6,302.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Analog multi-tester VS-100

  SANWA ELE INST

  A safe design with a current-limiting fuse that can interrupt currents up to 100kA.
  
  [Features]
  · Current-limiting fuse that can interrupt 100kA.
  · Tester for electrical equipment maintenance. Suitable for measuring high capacity low voltage circuits (500V and below).
  · Includes a built-in current-limiting fuse that can interrupt currents up to 100kA, preventing the risk of arcing occurring.
  · All ranges are protected from applied voltage up to 500V.
  · Hard case included.

  From: ₹ 19,489.65
  Days to Ship: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Digital Tester (analog tester)

  SANWA ELE INST

  Measuring instrument with 1.5 V battery check range installed. Supports direct current high voltage and temperature measurement.
  [Features]
  ・ Equipped with 20 measuring ranges to cover common applications
  ・ 500 μF capacitor check range
  ・ Tilt stand for visibility of meter deflection
  ・ Direct current high voltage and temperature can be measured with separately sold option
  ・ Battery check
  ・ Equipped with impact resistant tote band meter that is resistant to drops and impacts
  [Applications]
  ・ Ideal for electrical work with an impact resistance meter
  ・ It can be used in a wide range of scenes by using the separately sold option

  From: ₹ 5,485.22
  Days to Ship: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Digital Multi Meter

  SANWA ELE INST

  Logging function for recording each measurement, dual display.
  
  [Features]
  · 6,000 and 9,999 count.
  · 0.06% full accuracy.
  · True RMS measurement (AC).
  · Dual display with backlight.
  · Fast response bar graph display.
  · Low input impedance type ACV/DCV/Ω automatic discrimination function.
  · Measuring capacitor capacitance. Note: Not suitable for measuring the capacitance of capacitors with large amounts of leakage current.
  · Temperature measurement which can perform 2ch measurement (when using K type temperature sensor). Note: K-AD accessory (sold separately) may be required. K type temperature sensor K-250PCx1 included.
  · Frequency measurement (sine wave AC only).
  · Logic frequency, duty ratio measurement.
  · Conductance measurement.
  · MAX/MIN recording function.
  · Peak hold (accuracy ±250dgt) 1ms.
  · Data hold/range hold.
  · Relative value measurement.
  · Auto power off (after approximately 30 minutes) can be canceled.
  · Alarm for when test lead is improperly inserted into the current terminal.
  · Optical link USB interface (optional).

  From: ₹ 37,751.04
  Days to Ship: 13 Day(s) or more

  13 Day(s) or more

Brand
Product Series
From
Days to Ship

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	SANWA ELE INST	SANWA ELE INST	SANWA ELE INST	SANWA ELE INST	SANWA ELE INST	SANWA ELE INST	SANWA ELE INST	SANWA ELE INST	SANWA ELE INST
Product Series	Insulation Resistance MeterMG1000	Convenient LCR meter	Digital Multi Meter PC773	Digital Multi Meter RD700	Digital Multi Meter RD701	Analog multi-tester SP-18D	Analog multi-tester VS-100	Digital Tester (analog tester)	Digital Multi Meter
From	₹ 31,615.80	₹ 33,492.47	₹ 18,151.11	₹ 11,336.62	₹ 13,322.95	₹ 6,302.44	₹ 19,489.65	₹ 5,485.22	₹ 37,751.04
Days to Ship	13 Day(s) or more	13 Day(s) or more	13 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	13 Day(s) or more	12 Day(s) or more	13 Day(s) or more

Loading...