SANDVIK Holding Tools for I.D. Tuning（Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN SL, Vibration-proof Boring Bit

  SANDVIK

  CoroTurn SL is a modular system of adapters and cutting heads that allows the construction of customized tools for a variety of turning operations with a minimum number of items

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	-	-	-	620	-	60	-	Available

  From: ₹ 318,571.18
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR/L-X

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  For back boring machining.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	33	Internal Diameter / Inner diameter profiling / Pull	Left-hand	Screw-on	312.2	7°	25	15 ~ 40	Available

  From: ₹ 24,997.45
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDQCR/L

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	16 ～ 32	Internal Diameter / Inner diameter profiling / Pull	Right-hand / Left-hand	Screw-on	150 ～ 300	7°	12 ～ 25	18 ~ 48 ～ 100	Available

  From: ₹ 16,113.25
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDXCR/L

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	20 ～ 32	Internal Diameter / Inner diameter profiling / Pull	Right-hand / Left-hand	Screw-on	155.1 ～ 300	7°	16 ～ 25	18 ~ 48 ～ 100	Available

  From: ₹ 16,113.25
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SSKCR/L-R

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  The EasyFix sleeve allows for quick and accurate center height adjustment.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  S (Rectangular)	20	Internal Diameter	Right-hand	Screw-on	200	7°	16	24 ~ 64	Available

  From: ₹ 17,451.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SSKCR/L

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  S (Rectangular)	32 ～ 40	Internal Diameter	Right-hand / Left-hand	Screw-on	300	7°	25 ～ 32	100 ～ 128	Available

  From: ₹ 21,513.69
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-STFCR/L

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	11 ～ 50	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	100 ～ 300	7°	8 ～ 40	9 ~ 24 ～ 60 ~ 160	Available

  From: ₹ 17,451.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  (Integrated) CoroTurn 107, Boring Tool Bit for Turning (Part Number List)

  SANDVIK

  [Features]Inner diameter boring tool bit with low cutting force. The internal coolant ensures longer insert lifespan and good cutting chip handling. High tool rigidity ensures stable machining operations even with workpieces with long protrusions. For inner diameter turning operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	11	Internal Diameter	Right-hand	Screw-on	125	7°	10	15 ~ 40	NA

  From: ₹ 17,451.31
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR/L

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  The EasyFix sleeve allows for quick and accurate center height adjustment.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  V (35° Diamond-Shaped)	22	Internal Diameter / Inner diameter profiling	Left-hand	Screw-on	200	7°	16	24 ~ 64	Available

  From: ₹ 17,451.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn 107, Boring Tool Bit for Turning

  SANDVIK

  [Features]
  ·Inner diameter boring tool bit with low cutting force
  ·The internal coolant ensures longer insert lifespan and good cutting chip handling
  ·High tool rigidity ensures stable machining operations even with workpieces with long protrusions
  [Applications]
  ·For inner diameter turning operations

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  V (35° Diamond-Shaped) / T (Triangle)	6 ～ 50	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	80 ～ 300	5° / 7°	5 ～ 40	7.5 ~ 20 ～ 160	Available / NA

  From: ₹ 16,429.36
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR/L-E

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  V (35° Diamond-Shaped)	22	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	200	7°	16	24 ~ 64	Available

  From: ₹ 17,451.31
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVUBR/L

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  V (35° Diamond-Shaped)	27 ～ 33	Internal Diameter / Inner diameter profiling	Left-hand	Screw-on	250 ～ 300	5°	20 ～ 25	30 ~ 80 ～ 100	Available

  From: ₹ 21,721.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn 111, Boring Tool Bit for Turning

  SANDVIK

  [Features]
  ·Inner diameter boring tool bit with low cutting force
  ·The internal coolant ensures longer insert lifespan and good cutting chip handling. High tool rigidity ensures stable machining operations even with workpieces with long protrusions
  ·Easy-fix sleeve for quick and accurate core height adjustment
  [Applications]
  ·For inner diameter turning operations

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape) / T (Triangle)	10 ～ 32	Internal Diameter / Inner diameter profiling	Left-hand	Screw-on	125 ～ 300	11°	8 ～ 25	12 ~ 32 ～ 37.5 ~ 100	Available

  From: ₹ 17,451.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR/L-ER

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  The EasyFix sleeve allows for quick and accurate center height adjustment.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	18 ～ 20	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	150 ～ 200	11°	12 ～ 16	18 ~ 48 ～ 24 ~ 64	Available

  From: ₹ 17,451.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR/L

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	15 ～ 32	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	125 ～ 300	11°	10 ～ 25	15 ~ 40 ～ 37.5 ~ 100	Available

  From: ₹ 17,451.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDXPR/L

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	22	Internal Diameter / Inner diameter profiling / Pull	Left-hand	Screw-on	204.6	11°	16	24 ~ 64	Available

  From: ₹ 17,451.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-STFPR/L-R

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8.5 ～ 20	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	80 ～ 200	11°	6 ～ 16	9 ~ 24 ～ 32	Available

  From: ₹ 15,408.75
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-STFPR/L-R

  SANDVIK

  [Features]
  A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit.
  The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter.
  For inner-diameter turning (bore cutting) operations with longer protrusions.
  For suppressing chattering.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	13 ～ 16	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	150 ～ 180	11°	10 ～ 12	72 ~ 120 ～ 120	NA

  From: ₹ 68,316.15
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111 Screw Clamp, A/E-SWLPR/LR

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	6.5 ～ 16	Internal Diameter	Right-hand / Left-hand	Screw-on	80 ～ 180	11°	5 ～ 12	7.5 ~ 20 ～ 72	Available

  From: ₹ 17,451.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 111, Screw Clamp, A...SWLPR/L

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  The EasyFix sleeve allows for quick and accurate center height adjustment.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	8.5 ～ 12	Internal Diameter	Right-hand / Left-hand	Screw-on	80 ～ 125	11°	6 ～ 10	9 ~ 24 ～ 15 ~ 40	Available

  From: ₹ 17,451.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Bit CoroTurn RC Double Clamp A-DWLNR/L

  SANDVIK

  [Features]
  A highly-rigid double clamp boring bit for inner diameter lathe turning
  Supports the use of internal coolant
  High tool rigidity
  Supports inner-diameter turning (bore cutting) and the use of negative inserts
  Supports everything from roughing through to finishing

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	40 ～ 50	Internal Diameter	Right-hand / Left-hand	Cable clamp	300	0°	32 ～ 40	48 ~ 128 ～ 60 ~ 160	Available

  From: ₹ 39,496.40
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn SL, 570 Type T-Max P, Head for Back Boring

  SANDVIK

  [Features]Cutting head for inner diameter turning with a replaceable head. Excellent insert clamping rigidity due to the double clamping. Quick head changes are possible, reducing downtime. Inner diameter turning operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	50	Internal Diameter / Inner diameter profiling / Pull	Left-hand	Cable clamp	-	0°	40	20	Available

  From: ₹ 40,724.62
  Days to Ship: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DDXNR/L

  SANDVIK

  [Features]
  An interchangeable-head-type cutting head for inner diameter cutting.
  Being a double clamp gives it excellent insert-clamping rigidity.
  The heads can be quickly changed out, helping reduce down time.
  Inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	40	Internal Diameter / Inner diameter profiling / Pull	Left-hand	Cable clamp	-	0°	32	20	Available

  From: ₹ 39,282.09
  Days to Ship: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DSKNR/L

  SANDVIK

  [Features]
  An interchangeable-head-type cutting head for inner diameter cutting.
  Being a double clamp gives it excellent insert-clamping rigidity.
  The heads can be quickly changed out, helping reduce down time.
  Inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  S (Rectangular)	55	Internal Diameter	Right-hand / Left-hand	Cable clamp	-	-	40	36	Available

  From: ₹ 36,875.20
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DWLNR/L

  SANDVIK

  [Features]
  An interchangeable-head-type cutting head for inner diameter cutting.
  Being a double clamp gives it excellent insert-clamping rigidity.
  The heads can be quickly changed out, helping reduce down time.
  Inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  W (Hexagonal Type)	50	Internal Diameter	Left-hand	Cable clamp	-	0°	40	36	Available

  From: ₹ 40,724.62
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cartridge, CoroTurn 107 Screw Clamp, SRSCR/L

  SANDVIK

  For internal and external turning of slender parts
  Highly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  R (Circular)	20 ～ 40	Internal Diameter	Right-hand / Left-hand	-	25 ～ 50	-	-	-	NA

  From: ₹ 21,307.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cartridge, CoroTurn 107 Screw Clamp, SSKCR/L

  SANDVIK

  For internal and external turning of slender parts
  Highly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  S (Rectangular)	40 ～ 55	Internal Diameter	Right-hand / Left-hand	-	52.2 ～ 66.1	-	-	-	NA

  From: ₹ 20,621.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cartridge, CoroTurn 107 Screw Clamp, SSSCR/L

  SANDVIK

  For internal and external turning of slender parts
  Highly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  S (Rectangular)	40 ～ 50	Internal Diameter	Right-hand / Left-hand	-	50.1 ～ 55.3	-	-	-	NA

  From: ₹ 20,621.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-STFCR/L

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The bit is made of solid-carbide materials, giving it a higher rigidity than that found with steel tool bits.
  The EasyFix sleeve allows for quick and accurate center height adjustment.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8.5 ～ 20	Internal Diameter	Right-hand / Left-hand	Screw-on	100 ～ 200	7°	6 ～ 16	36 ～ 64	Available

  From: ₹ 25,723.42
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, F...-STFCR/L

  SANDVIK

  [Features]
  A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit.
  The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter.
  For inner-diameter turning (bore cutting) operations with longer protrusions.
  For suppressing chattering.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	13 ～ 16	Internal Diameter	Right-hand / Left-hand	Screw-on	-	7°	10 ～ 12	60～100 ～ 120	-

  From: ₹ 68,316.15
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn SL Shank Adapter 570-NG

  SANDVIK

  [Features]
  An interchangeable-head-type turning bit.
  Has fewer tool points making inventory management easy and allowing the selection of multiple types of cutting unit.
  For outer diameter turning of all types of work material.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  -	-	Internal Diameter	Right-hand	-	103 ～ 152	-	25 ～ 40	-	Available

  From: ₹ 18,841.60
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn SL, 570 Type Cutting Head CoroTurn, 107, 570-STFCL

  SANDVIK

  [Features]
  An interchangeable-head-type cutting head for inner-diameter turning.
  The low cutting resistance ensures stable machining operations.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	40 ～ 50	Internal Diameter	Left-hand	Screw-on	-	-	32 ～ 40	32	Available

  From: ₹ 35,570.64
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn SL, 570 Type Cutting Head CoroTurn, 107, 570-SVUCR/L

  SANDVIK

  [Features]
  An interchangeable-head-type cutting head for inner-diameter turning.
  The low cutting resistance ensures stable machining operations.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  V (35° Diamond-Shaped)	32 ～ 37	Internal Diameter / Inner diameter profiling / Pull	Right-hand / Left-hand	Screw-on	15 ～ 20	-	20 ～ 25	20	Available

  From: ₹ 32,603.87
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Boring Tool Bit For Turning, CCLNR/L

  SANDVIK

  First recommendation for general turning for medium to large parts
  Inserts with geometries and grades for all machining areas

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	-	Internal Diameter	Right-hand	Clamp-on	200 ～ 300	-	-	80 ～ 100	-

  From: ₹ 47,909.13
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max S Boring Tool Bit For Turning, CTFPR/L

  SANDVIK

  T-Max S Turning Boring Bits for a Productive, Efficient and Reliable Machining Solution

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	-	Internal Diameter	Right-hand	Clamp-on	400	-	40	80/160	-

  From: ₹ 34,240.62
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max S Boring Tool Bit For Turning S..CTFPR/L

  SANDVIK

  A boring tool bit for turning that achieves high productivity, high quality, and high efficiency

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	20 mm ～ 32 mm	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Clamp-on	200 mm ～ 300 mm	11°	16 mm ～ 25 mm	32.5 – 64 mm ～ 49 – 100 mm	NA

  From: ₹ 16,429.36
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Inner-Diameter Boring Bit PCLNR/L

  SANDVIK

  First recommendation for general turning for medium to large parts
  Inserts with geometries and grades for all machining areas

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	25 ～ 63	Internal Diameter	Right-hand / Left-hand	Lever lock	200 ～ 350	-	-	34 ～ 45	Available

  From: ₹ 44,705.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Inner-Diameter Boring Bit PTFNR/L

  SANDVIK

  First recommendation for general turning for medium to large parts
  Inserts with geometries and grades for all machining areas

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	28 ～ 32	Internal Diameter	Right-hand	Lever lock	200 ～ 300	-	-	30	Available

  From: ₹ 44,705.31
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-MaxR P Cartridge For Turning, PSKN

  SANDVIK

  T-Max P Turning Tool Cartridge for a Productive, Efficient and Reliable Machining Solution

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  S (Rectangular)	-	Internal Diameter	Right-hand	-	-	-	-	-	NA

  From: ₹ 29,791.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cartridge Round Shank Boring Tool Bit For Positive Inserts R/L141

  SANDVIK

  Cartridge for CoroTurn 107 for internal and external turning of slender parts

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8 ～ 20	Internal Diameter	Right-hand / Left-hand	Screw-on	30 ～ 128	-	-	-	NA

  From: ₹ 14,788.60
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cartridge Round Shank Boring Tool Bit For Positive Inserts R/L142

  SANDVIK

  Cartridge for CoroTurn 107 for internal and external turning of slender parts

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8 ～ 20	Internal Diameter	Right-hand / Left-hand	Screw-on	30 ～ 128	-	-	-	NA

  From: ₹ 14,788.60
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn HP SL Cutting Head PCLN

  SANDVIK

  CoroTurn SL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	34 ～ 56	Internal Diameter	Right-hand / Left-hand	Lever lock	28 ～ 42	-	25 ～ 40	-	Available

  From: ₹ 44,350.36
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn HP SL Cutting Head PDUN

  SANDVIK

  CoroTurn SL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	38 ～ 56	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Lever lock	32 ～ 36	-	25 ～ 40	-	Available

  From: ₹ 44,350.36
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn HP SL Cutting Head PTFNR/L-HP

  SANDVIK

  CoroTurn SL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	40 ～ 50	Internal Diameter	Right-hand / Left-hand	Lever lock	35	-	32 ～ 40	-	Available

  From: ₹ 46,248.29
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn HP SL Cutting Head, TR-SL-D13UCR/L-HP

  SANDVIK

  CoroTurn SL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	40 ～ 50	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	38	-	32 ～ 40	-	Available

  From: ₹ 40,551.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Applicable Tip Shape
Minimum Processing Diameter φA
Application
Selfishly
Clamp Shape
Overall Length L1
Clearance angle
Shank Diameter φD
Protrusion length (L/D)
Lubrication Hole Y/N

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product Series	CORO-TURN SL, Vibration-proof Boring Bit	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR/L-X	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDQCR/L	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDXCR/L	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SSKCR/L-R	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SSKCR/L	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-STFCR/L	(Integrated) CoroTurn 107, Boring Tool Bit for Turning (Part Number List)	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR/L	CoroTurn 107, Boring Tool Bit for Turning	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR/L-E	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVUBR/L	CoroTurn 111, Boring Tool Bit for Turning	Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR/L-ER	Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR/L	Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDXPR/L	Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-STFPR/L-R	Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-STFPR/L-R	Boring Tool Bit, CoroTurn 111 Screw Clamp, A/E-SWLPR/LR	Boring Tool Bit, CoroTurn 111, Screw Clamp, A...SWLPR/L	Boring Bit CoroTurn RC Double Clamp A-DWLNR/L	CoroTurn SL, 570 Type T-Max P, Head for Back Boring	CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DDXNR/L	CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DSKNR/L	CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DWLNR/L	Cartridge, CoroTurn 107 Screw Clamp, SRSCR/L	Cartridge, CoroTurn 107 Screw Clamp, SSKCR/L	Cartridge, CoroTurn 107 Screw Clamp, SSSCR/L	Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-STFCR/L	Boring Tool Bit, CoroTurn 107, Screw Clamp, F...-STFCR/L	CoroTurn SL Shank Adapter 570-NG	CoroTurn SL, 570 Type Cutting Head CoroTurn, 107, 570-STFCL	CoroTurn SL, 570 Type Cutting Head CoroTurn, 107, 570-SVUCR/L	T-Max P Boring Tool Bit For Turning, CCLNR/L	T-Max S Boring Tool Bit For Turning, CTFPR/L	T-Max S Boring Tool Bit For Turning S..CTFPR/L	T-Max P Inner-Diameter Boring Bit PCLNR/L	T-Max P Inner-Diameter Boring Bit PTFNR/L	T-MaxR P Cartridge For Turning, PSKN	Cartridge Round Shank Boring Tool Bit For Positive Inserts R/L141	Cartridge Round Shank Boring Tool Bit For Positive Inserts R/L142	CoroTurn HP SL Cutting Head PCLN	CoroTurn HP SL Cutting Head PDUN	CoroTurn HP SL Cutting Head PTFNR/L-HP	CoroTurn HP SL Cutting Head, TR-SL-D13UCR/L-HP
From	₹ 318,571.18	₹ 24,997.45	₹ 16,113.25-	₹ 16,113.25-	₹ 17,451.31	₹ 21,513.69-	₹ 17,451.31-	₹ 17,451.31	₹ 17,451.31	₹ 16,429.36-	₹ 17,451.31	₹ 21,721.31-	₹ 17,451.31-	₹ 17,451.31	₹ 17,451.31-	₹ 17,451.31	₹ 15,408.75-	₹ 68,316.15-	₹ 17,451.31-	₹ 17,451.31	₹ 39,496.40-	₹ 40,724.62	₹ 39,282.09	₹ 36,875.20	₹ 40,724.62	₹ 21,307.44	₹ 20,621.65-	₹ 20,621.65-	₹ 25,723.42-	₹ 68,316.15-	₹ 18,841.60-	₹ 35,570.64-	₹ 32,603.87-	₹ 47,909.13-	₹ 34,240.62	₹ 16,429.36-	₹ 44,705.31-	₹ 44,705.31-	₹ 29,791.15	₹ 14,788.60-	₹ 14,788.60-	₹ 44,350.36-	₹ 44,350.36-	₹ 46,248.29-	₹ 40,551.84-
Days to Ship	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	14 Day(s) or more	14 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	5 Day(s) or more
Applicable Tip Shape	-	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	S (Rectangular)	S (Rectangular)	T (Triangle)	T (Triangle)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped) / T (Triangle)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	C (80° Diamond-Shape) / T (Triangle)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	T (Triangle)	T (Triangle)	W (Hexagonal Type)	W (Hexagonal Type)	W (Hexagonal Type)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	S (Rectangular)	W (Hexagonal Type)	R (Circular)	S (Rectangular)	S (Rectangular)	T (Triangle)	T (Triangle)	-	T (Triangle)	V (35° Diamond-Shaped)	C (80° Diamond-Shape)	T (Triangle)	T (Triangle)	C (80° Diamond-Shape)	T (Triangle)	S (Rectangular)	T (Triangle)	T (Triangle)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	T (Triangle)	D (55° Diamond-Shape)
Minimum Processing Diameter φA	-	33	16 ～ 32	20 ～ 32	20	32 ～ 40	11 ～ 50	11	22	6 ～ 50	22	27 ～ 33	10 ～ 32	18 ～ 20	15 ～ 32	22	8.5 ～ 20	13 ～ 16	6.5 ～ 16	8.5 ～ 12	40 ～ 50	50	40	55	50	20 ～ 40	40 ～ 55	40 ～ 50	8.5 ～ 20	13 ～ 16	-	40 ～ 50	32 ～ 37	-	-	20 mm ～ 32 mm	25 ～ 63	28 ～ 32	-	8 ～ 20	8 ～ 20	34 ～ 56	38 ～ 56	40 ～ 50	40 ～ 50
Application	-	Internal Diameter / Inner diameter profiling / Pull	Internal Diameter / Inner diameter profiling / Pull	Internal Diameter / Inner diameter profiling / Pull	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling / Pull	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling / Pull	Internal Diameter / Inner diameter profiling / Pull	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling / Pull	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter	Internal Diameter / Inner diameter profiling
Selfishly	-	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Left-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Left-hand	Right-hand / Left-hand	Right-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand
Clamp Shape	-	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Cable clamp	Cable clamp	Cable clamp	Cable clamp	Cable clamp	-	-	-	Screw-on	Screw-on	-	Screw-on	Screw-on	Clamp-on	Clamp-on	Clamp-on	Lever lock	Lever lock	-	Screw-on	Screw-on	Lever lock	Lever lock	Lever lock	Screw-on
Overall Length L1	620	312.2	150 ～ 300	155.1 ～ 300	200	300	100 ～ 300	125	200	80 ～ 300	200	250 ～ 300	125 ～ 300	150 ～ 200	125 ～ 300	204.6	80 ～ 200	150 ～ 180	80 ～ 180	80 ～ 125	300	-	-	-	-	25 ～ 50	52.2 ～ 66.1	50.1 ～ 55.3	100 ～ 200	-	103 ～ 152	-	15 ～ 20	200 ～ 300	400	200 mm ～ 300 mm	200 ～ 350	200 ～ 300	-	30 ～ 128	30 ～ 128	28 ～ 42	32 ～ 36	35	38
Clearance angle	-	7°	7°	7°	7°	7°	7°	7°	7°	5° / 7°	7°	5°	11°	11°	11°	11°	11°	11°	11°	11°	0°	0°	0°	-	0°	-	-	-	7°	7°	-	-	-	-	-	11°	-	-	-	-	-	-	-	-	-
Shank Diameter φD	60	25	12 ～ 25	16 ～ 25	16	25 ～ 32	8 ～ 40	10	16	5 ～ 40	16	20 ～ 25	8 ～ 25	12 ～ 16	10 ～ 25	16	6 ～ 16	10 ～ 12	5 ～ 12	6 ～ 10	32 ～ 40	40	32	40	40	-	-	-	6 ～ 16	10 ～ 12	25 ～ 40	32 ～ 40	20 ～ 25	-	40	16 mm ～ 25 mm	-	-	-	-	-	25 ～ 40	25 ～ 40	32 ～ 40	32 ～ 40
Protrusion length (L/D)	-	15 ~ 40	18 ~ 48 ～ 100	18 ~ 48 ～ 100	24 ~ 64	100 ～ 128	9 ~ 24 ～ 60 ~ 160	15 ~ 40	24 ~ 64	7.5 ~ 20 ～ 160	24 ~ 64	30 ~ 80 ～ 100	12 ~ 32 ～ 37.5 ~ 100	18 ~ 48 ～ 24 ~ 64	15 ~ 40 ～ 37.5 ~ 100	24 ~ 64	9 ~ 24 ～ 32	72 ~ 120 ～ 120	7.5 ~ 20 ～ 72	9 ~ 24 ～ 15 ~ 40	48 ~ 128 ～ 60 ~ 160	20	20	36	36	-	-	-	36 ～ 64	60～100 ～ 120	-	32	20	80 ～ 100	80/160	32.5 – 64 mm ～ 49 – 100 mm	34 ～ 45	30	-	-	-	-	-	-	-
Lubrication Hole Y/N	Available	Available	Available	Available	Available	Available	Available	NA	Available	Available / NA	Available	Available	Available	Available	Available	Available	Available	NA	Available	Available	Available	Available	Available	Available	Available	NA	NA	NA	Available	-	Available	Available	Available	-	-	NA	Available	Available	NA	NA	NA	Available	Available	Available	Available

Loading...