SANDVIK Holding Tools for I.D. Tuning（Clearance angle：7°）

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR/L-ERX-R

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  For back boring machining.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	22 ～ 27	Internal Diameter / Inner diameter profiling / Pull	Right-hand / Left-hand	Screw-on	200 ～ 250	7°	16 ～ 20	24 ~ 64 ～ 80	Available

  From: ₹ 17,451.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto Cutting Head For Inner-Diameter Turning SDUCR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shape
  The quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	20 ～ 63	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	-	7°	-	-	Available

  From: ₹ 34,654.49
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN 107 Boring Bit for Positive Tips

  SANDVIK

  For inner and outer diameter turning of slender parts
  High repeatability insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	20	Internal Diameter	Left-hand	Screw-on	200	7°	16	24 ~ 64	Available

  From: ₹ 17,451.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN 107 Carbide Boring Bit for Positive Tips

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8.5 ～ 25	Internal Diameter	Right-hand / Left-hand	Screw-on	80 ～ 250	7°	6 ～ 20	9 ~ 24 ～ 80	Available

  From: ₹ 16,113.25
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN 107 Carbide Vibration-proof Boring Bit for Positive Tips

  SANDVIK

  For inner and outer diameter turning of slender parts
  High repeatability insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	18	Internal Diameter / Inner diameter profiling	Left-hand	Screw-on	150 ～ 180	7°	12	120	NA

  From: ₹ 68,316.15
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR/L-X

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  For back boring machining.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	33	Internal Diameter / Inner diameter profiling / Pull	Left-hand	Screw-on	312.2	7°	25	15 ~ 40	Available

  From: ₹ 24,997.45
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDQCR/L

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	16 ～ 32	Internal Diameter / Inner diameter profiling / Pull	Right-hand / Left-hand	Screw-on	150 ～ 300	7°	12 ～ 25	18 ~ 48 ～ 100	Available

  From: ₹ 16,113.25
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDXCR/L

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	20 ～ 32	Internal Diameter / Inner diameter profiling / Pull	Right-hand / Left-hand	Screw-on	155.1 ～ 300	7°	16 ～ 25	18 ~ 48 ～ 100	Available

  From: ₹ 16,113.25
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SSKCR/L-R

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  The EasyFix sleeve allows for quick and accurate center height adjustment.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  S (Rectangular)	20	Internal Diameter	Right-hand	Screw-on	200	7°	16	24 ~ 64	Available

  From: ₹ 17,451.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SSKCR/L

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  S (Rectangular)	32 ～ 40	Internal Diameter	Right-hand / Left-hand	Screw-on	300	7°	25 ～ 32	100 ～ 128	Available

  From: ₹ 21,513.69
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-STFCR/L

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	11 ～ 50	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	100 ～ 300	7°	8 ～ 40	9 ~ 24 ～ 60 ~ 160	Available

  From: ₹ 17,451.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  (Integrated) CoroTurn 107, Boring Tool Bit for Turning (Part Number List)

  SANDVIK

  [Features]Inner diameter boring tool bit with low cutting force. The internal coolant ensures longer insert lifespan and good cutting chip handling. High tool rigidity ensures stable machining operations even with workpieces with long protrusions. For inner diameter turning operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	11	Internal Diameter	Right-hand	Screw-on	125	7°	10	15 ~ 40	NA

  From: ₹ 17,451.31
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR/L

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  The EasyFix sleeve allows for quick and accurate center height adjustment.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  V (35° Diamond-Shaped)	22	Internal Diameter / Inner diameter profiling	Left-hand	Screw-on	200	7°	16	24 ~ 64	Available

  From: ₹ 17,451.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn 107, Boring Tool Bit for Turning

  SANDVIK

  [Features]
  ·Inner diameter boring tool bit with low cutting force
  ·The internal coolant ensures longer insert lifespan and good cutting chip handling
  ·High tool rigidity ensures stable machining operations even with workpieces with long protrusions
  [Applications]
  ·For inner diameter turning operations

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	6 ～ 11	Internal Diameter	Left-hand	Screw-on	80 ～ 125	7°	5 ～ 10	7.5 ~ 20 ～ 15 ~ 40	NA

  From: ₹ 16,429.36
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR/L-E

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  V (35° Diamond-Shaped)	22	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	200	7°	16	24 ~ 64	Available

  From: ₹ 17,451.31
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-STFCR/L

  SANDVIK

  [Features]
  An inner-diameter boring tool bit with low cutting resistance.
  The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
  The bit is made of solid-carbide materials, giving it a higher rigidity than that found with steel tool bits.
  The EasyFix sleeve allows for quick and accurate center height adjustment.
  For inner-diameter turning (bore cutting) operations.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	8.5 ～ 20	Internal Diameter	Right-hand / Left-hand	Screw-on	100 ～ 200	7°	6 ～ 16	36 ～ 64	Available

  From: ₹ 25,723.42
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Boring Tool Bit, CoroTurn 107, Screw Clamp, F...-STFCR/L

  SANDVIK

  [Features]
  A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit.
  The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter.
  For inner-diameter turning (bore cutting) operations with longer protrusions.
  For suppressing chattering.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	13 ～ 16	Internal Diameter	Right-hand / Left-hand	Screw-on	-	7°	10 ～ 12	60～100 ～ 120	-

  From: ₹ 68,316.15
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn SL 570 Type Cutting Head TR-SL-D13UCR/L

  SANDVIK

  [Features]
  SL coupling
  Extremely high clamp rigidity
  The T-rail interface ensures minimal undercutting on the restraint surface, maintaining long-term machining precision
  High-precision machining
  For profile turning.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape) / V (35° Diamond-Shaped)	35 ～ 50	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	-	7°	25 ～ 40	27 ～ 32	Available

  From: ₹ 37,578.38
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn SL Quick-Change Cutting Head 570-SDUCR/L

  SANDVIK

  CoroTurnSL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	-	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	-	7°	80	-	NA

  From: ₹ 60,728.47
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn SL Quick-Change Cutting Head SL-SDUCR-X-QC

  SANDVIK

  CoroTurnSL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	-	Internal Diameter / Inner diameter profiling	Right-hand	Screw-on	15	7°	32	-	NA

  From: ₹ 40,433.98
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto Cutting Head For Inner-Diameter Turning C3-SDUCR/L-X

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shape
  The quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  D (55° Diamond-Shape)	22 ～ 32	Internal Diameter / Inner diameter profiling / Pull	Right-hand / Left-hand	Screw-on	-	7°	-	-	Available

  From: ₹ 34,654.49
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto Cutting Head For Inner-Diameter Turning SCLCR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shape
  The quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  C (80° Diamond-Shape)	20 ～ 63	Internal Diameter	Right-hand / Left-hand	Screw-on	-	7°	-	-	Available

  From: ₹ 34,654.49
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto Cutting Head For Inner-Diameter Turning STFCR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shape
  The quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Minimum Processing Diameter φA	Application	Selfishly	Clamp Shape	Overall Length L1	Clearance angle	Shank Diameter φD	Protrusion length (L/D)	Lubrication Hole Y/N
  T (Triangle)	20 ～ 40	Internal Diameter	Right-hand / Left-hand	Screw-on	-	7°	-	-	Available

  From: ₹ 34,654.49
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

Brand
Product Series
From
Days to Ship
Applicable Tip Shape
Minimum Processing Diameter φA
Application
Selfishly
Clamp Shape
Overall Length L1
Clearance angle
Shank Diameter φD
Protrusion length (L/D)
Lubrication Hole Y/N

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product Series	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR/L-ERX-R	Coromant Capto Cutting Head For Inner-Diameter Turning SDUCR/L	CORO-TURN 107 Boring Bit for Positive Tips	CORO-TURN 107 Carbide Boring Bit for Positive Tips	CORO-TURN 107 Carbide Vibration-proof Boring Bit for Positive Tips	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR/L-X	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDQCR/L	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDXCR/L	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SSKCR/L-R	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SSKCR/L	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-STFCR/L	(Integrated) CoroTurn 107, Boring Tool Bit for Turning (Part Number List)	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR/L	CoroTurn 107, Boring Tool Bit for Turning	Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR/L-E	Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-STFCR/L	Boring Tool Bit, CoroTurn 107, Screw Clamp, F...-STFCR/L	CoroTurn SL 570 Type Cutting Head TR-SL-D13UCR/L	CoroTurn SL Quick-Change Cutting Head 570-SDUCR/L	CoroTurn SL Quick-Change Cutting Head SL-SDUCR-X-QC	Coromant Capto Cutting Head For Inner-Diameter Turning C3-SDUCR/L-X	Coromant Capto Cutting Head For Inner-Diameter Turning SCLCR/L	Coromant Capto Cutting Head For Inner-Diameter Turning STFCR/L
From	₹ 17,451.31-	₹ 34,654.49-	₹ 17,451.31	₹ 16,113.25-	₹ 68,316.15-	₹ 24,997.45	₹ 16,113.25-	₹ 16,113.25-	₹ 17,451.31	₹ 21,513.69-	₹ 17,451.31-	₹ 17,451.31	₹ 17,451.31	₹ 16,429.36	₹ 17,451.31	₹ 25,723.42-	₹ 68,316.15-	₹ 37,578.38-	₹ 60,728.47-	₹ 40,433.98	₹ 34,654.49-	₹ 34,654.49-	₹ 34,654.49-
Days to Ship	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	8 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Applicable Tip Shape	D (55° Diamond-Shape)	D (55° Diamond-Shape)	C (80° Diamond-Shape)	T (Triangle)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	S (Rectangular)	S (Rectangular)	T (Triangle)	T (Triangle)	V (35° Diamond-Shaped)	T (Triangle)	V (35° Diamond-Shaped)	T (Triangle)	T (Triangle)	D (55° Diamond-Shape) / V (35° Diamond-Shaped)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	C (80° Diamond-Shape)	T (Triangle)
Minimum Processing Diameter φA	22 ～ 27	20 ～ 63	20	8.5 ～ 25	18	33	16 ～ 32	20 ～ 32	20	32 ～ 40	11 ～ 50	11	22	6 ～ 11	22	8.5 ～ 20	13 ～ 16	35 ～ 50	-	-	22 ～ 32	20 ～ 63	20 ～ 40
Application	Internal Diameter / Inner diameter profiling / Pull	Internal Diameter / Inner diameter profiling	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling / Pull	Internal Diameter / Inner diameter profiling / Pull	Internal Diameter / Inner diameter profiling / Pull	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter	Internal Diameter	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling	Internal Diameter / Inner diameter profiling / Pull	Internal Diameter	Internal Diameter
Selfishly	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand
Clamp Shape	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on
Overall Length L1	200 ～ 250	-	200	80 ～ 250	150 ～ 180	312.2	150 ～ 300	155.1 ～ 300	200	300	100 ～ 300	125	200	80 ～ 125	200	100 ～ 200	-	-	-	15	-	-	-
Clearance angle	7°	7°	7°	7°	7°	7°	7°	7°	7°	7°	7°	7°	7°	7°	7°	7°	7°	7°	7°	7°	7°	7°	7°
Shank Diameter φD	16 ～ 20	-	16	6 ～ 20	12	25	12 ～ 25	16 ～ 25	16	25 ～ 32	8 ～ 40	10	16	5 ～ 10	16	6 ～ 16	10 ～ 12	25 ～ 40	80	32	-	-	-
Protrusion length (L/D)	24 ~ 64 ～ 80	-	24 ~ 64	9 ~ 24 ～ 80	120	15 ~ 40	18 ~ 48 ～ 100	18 ~ 48 ～ 100	24 ~ 64	100 ～ 128	9 ~ 24 ～ 60 ~ 160	15 ~ 40	24 ~ 64	7.5 ~ 20 ～ 15 ~ 40	24 ~ 64	36 ～ 64	60～100 ～ 120	27 ～ 32	-	-	-	-	-
Lubrication Hole Y/N	Available	Available	Available	Available	NA	Available	Available	Available	Available	Available	Available	NA	Available	NA	Available	Available	-	Available	NA	NA	Available	Available	Available

Loading...