(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
SAKAGUCHI Temperature Sensors
SAKAGUCHI offers Temperature Sensors products in the Automation Components category such as, Standard Sheath Type, Temperature Safety Measure Components, Other Temperature / Humidity Sensors, Sensor Peripheral Components and many more products that are related to Temperature Sensors. Search and select detailed specifications of parts for your machine with free CAD downloads. SAKAGUCHI products are available to order through MISUMI online 24 hours a day. Free shipping, no minimum order.
SAKAGUCHI Temperature Sensors
-
Standard Sheath Type
-
Temperature Safety Measure Components
-
Other Temperature / Humidity Sensors
-
Sensor Peripheral Components
FAQ Temperature sensor
Wattage required for the Cartridge Heater (kW) ＝ the weight of heating product (kg) × specific heat of heating product (kcal/kg°C) × the increased temperature (°C) ／ 860× heating time (h) × heat efficiency (n)
It is difficult to calculate the Efficiency precisely because it varies by heat-retention, insulation, clearance arrangement of heaters, etc.
Unless usage in bad environment such as many heats leak out occurred, suitable efficiency for heater is 0.2
However, as long as the whole heat generating part covered inside the heater block and using within the operating temperature, it will last very long time.
The most excellent heat durable lead wire is Mica Polyimide-Wound Silica + Nickel Coated Copper Wire, which can endure heat up to 400°C
Please see more details about lead wire in each product page.
It is the same no matter how long the heater is.
The exact length from the end depends on the product type, please check the drawing on each product page.
Thermal sensor located within the L-dimension. The structure of the measuring mechanism is that temperature can be measured by the expansion of oil inside the heat sensitive part. Please use this heat sensitive part against the object to be measured.
• Bimetal Thermostats
The bimetal part was made from a bimetal disc.
If yes, can I use it by connecting to a normal outlet?
It can connect to the normal outlet; however, plug has to be selected depending on usage condition (100V or 200V)
When alarm function ON, electric circuit will be switching ON-OFF.
Do not let the heaters run idle in the atmosphere. If the heat generating part of the heater is operated out of the heated objects, the wire may break or ignite due to abnormal heating.
In case of application with reciprocating moving, it is recommended to put on angle bracket or terminal between heaters and temperature controllers that can prevent the root of lead wire from moving.
Because the Nichrome wire may be damaged.
And also, it be connected with Thermocouple for control?
In addition, it can be controlled by Thermocouple, since temperature is measured outside, so it needs the Temperature controllers as well, therefore, you need to prepare both Thermocouple and Temperature controllers.
And how deep should I insert the sheath inside the heated object?
For insertion depth, it should be inserted until the tip of sheath reach the bottom of hole.
Although material can be bent, but it is not recommended to be used in bending condition because it may affect to accuracy of temperature measurement.
However, capillary is filled with oil, so please use it carefully.
In case of using with 3 or more heaters, it is necessary to modify by adding terminal and connect to other heaters.
However, please be careful not to use over the rated voltage (V) and rated current (A)
But please be careful not to use over the rated voltage (V) and rated current (A)
And if temperature drop down below the lower limit, can relay be remained with the previous signal instead of return?
And if temperature drop down below the lower limit, signal hold function will turn ON so that relay can be remained with the previous signal.
Payment Method
- Credit Card
-
- Debit Cart
-
- Net Banking
-
- UPI
-
- Cheque on delivery
-
- Online payment
-
Social Media
MISUMI India Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy
Thank you for your cooperation.
Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.
Privacy Policy