OSG Radius End Mills (Carbide)（Machining Application：Plane）

• You can add up to 6 items per a category to the compare list. Compare

  

  GX3000 Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius

  OSG

  Carbide mushroom-shaped end mill with rounded corners developed for shrink-fit types.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  10 ～ 20	0.5 ～ 1	10 ～ 20	2	32 ～ 58	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	6 ～ 12	-	Plane	For General Steels (AlCrN, etc.)	radius	No torsion	-

  From: ₹ 6,042.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)

  OSG

  End mill with rounded corners for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.5 ～ 2.5	0.1	0.7 ～ 3.7	2	50	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	6	1.5 ～ 5	Plane	TiAlN	radius	Standard torsion (30-40°)	-

  From: ₹ 6,970.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills PHOENIX High-Feed Bull Nose

  OSG

  Corner radius type with a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 5	0.3 ～ 1	2 ～ 10	3	60 ～ 70	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]	6	4 ～ 15	Plane	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 18,126.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cermet End Mills TiAlN coated 4 Flutes for finishing the bottom surface

  OSG

  Cermet base material + FX coating end mill for bottom finish. Provides a mirror finish at astoundingly high speeds.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	0.1 ～ 0.4	0.9 ～ 3.2	4	90 ～ 160	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○]	6 ～ 20	9 ～ 30	Plane	TiAlN	radius	No torsion	-

  From: ₹ 10,051.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation

  OSG

  In addition to conventional coating properties, this coating has extremely high oxidation resistance to achieve high-speed machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	5 ～ 30	4	60 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	6 ～ 20	9 ～ 60	Plane	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 8,449.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN End Mills 2 Flutes Short with Corner Radius

  OSG

  2-Flute Short Corner Radius CBN-CR-EDS
  ·Demonstrates high performance in machining high-rigid materials

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 6	0.2 ～ 2	3 ～ 6	2	45 ～ 50	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]	6	-	Plane	Non-Coated	radius	No torsion	-

  From: ₹ 28,501.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius

  OSG

  Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	2.5 ～ 26	2	40 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	4 ～ 12	-	Plane	TiAlN	radius	Standard torsion (30-40°)	-

  From: ₹ 6,324.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius

  OSG

  Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	0.5 ～ 3	20 ～ 56	2	90 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	6 ～ 20	-	Plane	TiAlN	radius	Standard torsion (30-40°)	-

  From: ₹ 11,987.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide End Mills DLC Coated 2 Flutes Short for Aluminum Alloys

  OSG

  End mill for aluminum alloy based on the concept of ultra-high speed machining. Ideal for high-efficiency processing of large aluminum parts for aircrafts, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  12 ～ 25	1 ～ 3	14 ～ 27	2	90 ～ 110	Aluminum[◎]	12 ～ 25	40 ～ 56	Plane	DLC	radius	Weak torsion (15 to 25˚)	-

  From: ₹ 17,774.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide End Mills 3 Flutes for Aluminum Alloys

  OSG

  Strain generation is suppressed by the R of the shank side flange.
  Work Material Aluminum/Copper
  Coating: Uncoated, Standard/Alteration category: Manufacturer's standard product, Corner/Ball radius (mm) 1
  Number of flutes (pcs.) 3

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  18 ～ 22	1	18 ～ 22	3	51 ～ 60	Aluminum[◎] / Copper[◎]	10 ～ 12	-	Plane	Non-Coated	radius	No torsion	-

  From: ₹ 23,092.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3 Flutes Short for Copper & Aluminum Alloys

  OSG

  Even with aluminum part machining requiring large volumes of cutting, the unique groove form simultaneously achieves superior chip discharge performance, large cutting depth and a high feed rate.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	8 ～ 38	3	50 ～ 105	Aluminum[◎] / Copper[◎] / Resin[○]	6 ～ 20	-	Plane	Non-Coated	radius	Standard torsion (30-40°)	-

  From: ₹ 6,629.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills PHOENIX Deep-Feed Radius

  OSG

  Adopts an ultra-heat-resistant and ultra-hard WXS coating

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	1.5 ～ 3	12 ～ 40	3	80 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]	6 ～ 20	-	Plane	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 13,526.89
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Regular Grain Carbide End Mills 3 Flutes Pocket operation for Copper and Aluminum Alloys

  OSG

  High-rigidity recessed short blade that can be used for everything from roughing to finishing using various cutter paths.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.5 ～ 3	4.5 ～ 30	3	50 ～ 125	Aluminum[◎] / Copper[◎] / Resin[○]	6 ～ 20	-	Plane	Non-Coated	radius	Standard torsion (30-40°)	-

  From: ₹ 8,331.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes High Helix Short with Corner Radius

  OSG

  The highly sharp, positive cutting blade prevents the occurrence of work-hardening. Supports various cutter paths due to the rounded corners.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.2	13 ～ 26	4	90 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	6 ～ 12	-	Plane	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 17,574.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Long with Corner Radius

  OSG

  Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  16 ～ 20	0.5 ～ 3	48 ～ 56	4	140 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	16 ～ 20	-	Plane	TiAlN	radius	Standard torsion (30-40°)	-

  From: ₹ 65,721.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills 4 Flutes with Corner Radius (Super Hard)

  OSG

  Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 25	0.2 ～ 5	6 ～ 50	4	50 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	6 ～ 25	-	Plane	TiAlN	radius	Standard torsion (30-40°)	-

  From: ₹ 8,044.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated 2Flutes Long Shank

  OSG

  Thin vertical wall milling tool for graphite electrode. The step processing prevents chattering and chipping. A rounded blade is used for the shank side as well.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  5 ～ 11	0.3 ～ 1	10 ～ 22	2	100 ～ 180	Graphite[◎]	4 ～ 10	-	Plane	Dia Coat	radius	Standard torsion (30-40°)	-

  From: ₹ 24,552.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WX Super Radius End Mills

  OSG

  A new type of radius end mill that achieves high-efficiency rough machining of molds. Capable of direct high-performance engraving of hardened steel.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 13	0.5 ～ 3	0.8 ～ 5.5	3 ～ 4	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[◎]	6 ～ 12	5 ～ 24	Plane	TiAlN	radius	No torsion	-

  From: ₹ 5,881.64
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide End Mills DLC Coated 4 Flutes for High Speed Pocket Operation

  OSG

  Ultra-smooth DLC coating enables semi-dry processing as well as high speed processing of aluminum.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.5 ～ 3	4.5 ～ 30	3	50 ～ 125	Aluminum[◎] / Copper[○] / Resin[◎]	6 ～ 20	-	Plane	DLC	radius	Standard torsion (30-40°)	-

  From: ₹ 8,833.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation with HS Shank

  OSG

  Ideal for high-efficiency machining of pocket engraving with the minimum required blade length and strong torsion. Overall tool length which fits shrink-fit and HSK types perfectly.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.5 ～ 1	9 ～ 18	4	50 ～ 80	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	6 ～ 12	-	Plane	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 13,104.98
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard)

  OSG

  Next generation high torsion radius end mill with great chip discharge performance and high blade rigidity. Supports a wide range of cutter passes including ramping and profile processing in addition to normal 2D machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6	0.3	13	4	60	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	6	-	Plane	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 12,649.58
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WXS Coated Multiple Flutes Short Super

  OSG

  Radius end mill for high-speed processing with high rigidity. High speed machining of hardened steel is also possible.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 25	0.2 ～ 3	15 ～ 50	6 ～ 8	90 ～ 180	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]	6 ～ 25	-	Plane	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 17,934.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills Multiple Flutes Short with Corner Radius

  OSG

  Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 25	0.3 ～ 5	12 ～ 50	6	50 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	6 ～ 25	-	Plane	TiAlN	radius	Standard torsion (30-40°)	-

  From: ₹ 11,058.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated High Speed Multi-Purpose

  OSG

  Capable of high-efficiency, high-precision machining of wide standing walls using step cutting

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  10	0.5	15	4	130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]	8	-	Plane	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 17,140.58
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN End Mills 2 Flutes Radius

  OSG

  The three-dimensional negative shape of the R section provides both sharpness and rigidity, and the effect of the spiral blade suppresses fluctuations in cutting force, enabling high-precision side milling.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.5 ～ 3	0.05 ～ 0.5	0.3 ～ 1.8	2	45 ～ 50	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	4 ～ 6	1.5 ～ 6	Plane	-	radius	-	-

  From: ₹ 15,389.98
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Blade diameter (D)(φ)
R Size(mm)
Blade length (ℓ)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Type
Torsion Angle (θ)
R Precision(μm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	GX3000 Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)	Micro Grain Carbide End Mills PHOENIX High-Feed Bull Nose	Cermet End Mills TiAlN coated 4 Flutes for finishing the bottom surface	ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation	CBN End Mills 2 Flutes Short with Corner Radius	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius	Carbide End Mills DLC Coated 2 Flutes Short for Aluminum Alloys	Carbide End Mills 3 Flutes for Aluminum Alloys	3 Flutes Short for Copper & Aluminum Alloys	Micro Grain Carbide End Mills PHOENIX Deep-Feed Radius	Regular Grain Carbide End Mills 3 Flutes Pocket operation for Copper and Aluminum Alloys	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes High Helix Short with Corner Radius	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Long with Corner Radius	Micro Grain Carbide End Mills 4 Flutes with Corner Radius (Super Hard)	Diamond Coated 2Flutes Long Shank	WX Super Radius End Mills	Carbide End Mills DLC Coated 4 Flutes for High Speed Pocket Operation	ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation with HS Shank	ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard)	WXS Coated Multiple Flutes Short Super	Micro Grain Carbide End Mills Multiple Flutes Short with Corner Radius	ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated High Speed Multi-Purpose	CBN End Mills 2 Flutes Radius
From	₹ 6,042.36-	₹ 6,970.56-	₹ 18,126.36-	₹ 10,051.16-	₹ 8,449.25-	₹ 28,501.31-	₹ 6,324.96-	₹ 11,987.93-	₹ 17,774.11-	₹ 23,092.84-	₹ 6,629.02-	₹ 13,526.89-	₹ 8,331.38-	₹ 17,574.55-	₹ 65,721.73-	₹ 8,044.75-	₹ 24,552.78-	₹ 5,881.64-	₹ 8,833.65-	₹ 13,104.98-	₹ 12,649.58	₹ 17,934.84-	₹ 11,058.38-	₹ 17,140.58	₹ 15,389.98-
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Blade diameter (D)(φ)	10 ～ 20	0.5 ～ 2.5	1 ～ 5	6 ～ 20	3 ～ 20	3 ～ 6	1 ～ 12	6 ～ 20	12 ～ 25	18 ～ 22	3 ～ 20	6 ～ 20	3 ～ 20	6 ～ 12	16 ～ 20	3 ～ 25	5 ～ 11	2 ～ 13	3 ～ 20	6 ～ 12	6	6 ～ 25	6 ～ 25	10	0.5 ～ 3
R Size(mm)	0.5 ～ 1	0.1	0.3 ～ 1	0.1 ～ 0.4	0.2 ～ 3	0.2 ～ 2	0.1 ～ 3	0.5 ～ 3	1 ～ 3	1	0.2 ～ 3	1.5 ～ 3	0.5 ～ 3	0.2	0.5 ～ 3	0.2 ～ 5	0.3 ～ 1	0.5 ～ 3	0.5 ～ 3	0.5 ～ 1	0.3	0.2 ～ 3	0.3 ～ 5	0.5	0.05 ～ 0.5
Blade length (ℓ)(mm)	10 ～ 20	0.7 ～ 3.7	2 ～ 10	0.9 ～ 3.2	5 ～ 30	3 ～ 6	2.5 ～ 26	20 ～ 56	14 ～ 27	18 ～ 22	8 ～ 38	12 ～ 40	4.5 ～ 30	13 ～ 26	48 ～ 56	6 ～ 50	10 ～ 22	0.8 ～ 5.5	4.5 ～ 30	9 ～ 18	13	15 ～ 50	12 ～ 50	15	0.3 ～ 1.8
Number of flutes(sheet)	2	2	3	4	4	2	2	2	2	3	3	3	3	4	4	4	2	3 ～ 4	3	4	4	6 ～ 8	6	4	2
Overall Length (L)(mm)	32 ～ 58	50	60 ～ 70	90 ～ 160	60 ～ 160	45 ～ 50	40 ～ 110	90 ～ 160	90 ～ 110	51 ～ 60	50 ～ 105	80 ～ 150	50 ～ 125	90 ～ 110	140 ～ 160	50 ～ 120	100 ～ 180	60 ～ 110	50 ～ 125	50 ～ 80	60	90 ～ 180	50 ～ 120	130	45 ～ 50
work material	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[◎]	Aluminum[◎] / Copper[◎]	Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]	Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	Graphite[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[◎]	Aluminum[◎] / Copper[○] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]
Shank diameter (d)(mm)	6 ～ 12	6	6	6 ～ 20	6 ～ 20	6	4 ～ 12	6 ～ 20	12 ～ 25	10 ～ 12	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 12	16 ～ 20	6 ～ 25	4 ～ 10	6 ～ 12	6 ～ 20	6 ～ 12	6	6 ～ 25	6 ～ 25	8	4 ～ 6
Underneck length (ℓ1)(mm)	-	1.5 ～ 5	4 ～ 15	9 ～ 30	9 ～ 60	-	-	-	40 ～ 56	-	-	-	-	-	-	-	-	5 ～ 24	-	-	-	-	-	-	1.5 ～ 6
Machining Application	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane	Plane
Coating	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	TiAlN	TiAlN	Non-Coated	TiAlN	TiAlN	DLC	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	Non-Coated	TiAlN	TiAlN	TiAlN	Dia Coat	TiAlN	DLC	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	-
Type	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius
Torsion Angle (θ)	No torsion	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	No torsion	Powerful Torsion (45°-60°)	No torsion	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	No torsion	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	No torsion	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	-
R Precision(μm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...