(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.
MISUMI Spline Shaft（Type：Solid）
|
Nut Type
|
|
|---|---|
Brand |
|
| CAD |
|
| Days to Ship |
|
23 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
MISUMI
This is the least expensive ball spline suitable for fixation using shaft holders, etc., or for incorporating into plates. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Key Provided Type / Flanged Type 6 ～ 30.8 Solid Standard 25 ～ 80 14 ～ 47 Standard Standard Grade Standard Standard Middle Torque SUS440C Equivalent / SUJ2 Equivalent 1 ～ 2 Days to Ship: 10 Day(s) or more 
10 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines Straight Nut, Both Ends Tapped
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Tapped Tapped - SUJ2 Equivalent - Days to Ship: 11 Day(s)
11 Day(s)
-
You can add up to 6 items per a category to the compare list.
Ball Splines - Both Ends Tapped
MISUMI
This is the least expensive ball spline suitable for fixation using shaft holders, etc., or for incorporating into plates. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Key Provided Type / Flanged Type 6 ～ 30.8 Solid Standard 25 ～ 80 14 ～ 47 Standard Standard Grade Tapped Tapped Middle Torque SUS440C Equivalent / SUJ2 Equivalent - Days to Ship: 10 Day(s) or more
10 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Standard Standard - SUJ2 Equivalent - Days to Ship: 11 Day(s)
11 Day(s)
-
You can add up to 6 items per a category to the compare list.
Ball Splines - Both Ends Stepped Tapped
MISUMI
ball spline with stepped female threads on both ends. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Key Provided Type / Flanged Type 8 ～ 30.8 Solid Standard 25 ～ 80 16 ～ 47 Standard Standard Grade Stepped and Tapped Stepped and Tapped Middle Torque SUS440C Equivalent / SUJ2 Equivalent - Days to Ship: 10 Day(s) or more
10 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
ball spline with a female thread on one end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Key Provided Type / Flanged Type 6 ～ 30.8 Solid Standard 25 ～ 80 14 ～ 47 Standard Standard Grade Tapped Standard Middle Torque SUS440C Equivalent / SUJ2 Equivalent - Days to Ship: 10 Day(s) or more
10 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball Splines - Both Ends Stepped and Threaded
MISUMI
A ball spline with stepped male threads on both ends. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Key Provided Type / Flanged Type 6 ～ 30.8 Solid Standard 25 ～ 80 14 ～ 47 Standard Standard Grade Stepped and Threaded Stepped and Threaded Middle Torque SUS440C Equivalent / SUJ2 Equivalent - Days to Ship: 10 Day(s) or more
10 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines Round Flanged, One End Stepped
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Stepped Standard - SUJ2 Equivalent - Days to Ship: 11 Day(s)
11 Day(s)
-
You can add up to 6 items per a category to the compare list.
Ball Splines - One End Stepped and Threaded, One End Tapped
MISUMI
A ball spline with a stepped male thread on one end and a female thread on the other end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Key Provided Type / Flanged Type 6 ～ 30.8 Solid Standard 25 ～ 80 14 ～ 47 Standard Standard Grade Stepped and Threaded Tapped Middle Torque SUS440C Equivalent / SUJ2 Equivalent - Days to Ship: 10 Day(s) or more
10 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball Splines - One End Stepped
MISUMI
A ball spline with a stepped surface on one end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Key Provided Type / Flanged Type 6 ～ 30.8 Solid Standard 25 ～ 80 14 ～ 47 Standard Standard Grade Stepped Standard Middle Torque SUS440C Equivalent / SUJ2 Equivalent - Days to Ship: 10 Day(s) or more
10 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Standard Standard - SUJ2 Equivalent - Days to Ship: 11 Day(s)
11 Day(s)
-
You can add up to 6 items per a category to the compare list.
Ball Splines - Both Ends Stepped
MISUMI
ball spline with stepped edges on both ends. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Key Provided Type / Flanged Type 6 ～ 30.8 Solid Standard 25 ～ 80 14 ～ 47 Standard Standard Grade Stepped Stepped Middle Torque SCM415 Equivalent / SUS440C Equivalent - Days to Ship: 10 Day(s) or more
10 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines Round Flanged, Both Ends Tapped
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Tapped Tapped - SUJ2 Equivalent - Days to Ship: 11 Day(s)
11 Day(s)
-
You can add up to 6 items per a category to the compare list.
Ball Splines - One End Stepped and Threaded
MISUMI
ball spline with a stepped male thread on one end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Key Provided Type / Flanged Type 6 ～ 30.8 Solid Standard 25 ～ 80 14 ～ 47 Standard Standard Grade Stepped and Threaded Standard Middle Torque SUS440C Equivalent / SUJ2 Equivalent - Days to Ship: 10 Day(s) or more
10 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines Straight Nut, Both Ends Stepped
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Stepped Stepped - SUJ2 Equivalent - Days to Ship: 11 Day(s)
11 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines Round Flanged, Both Ends Stepped
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Stepped Stepped - SUJ2 Equivalent - Days to Ship: 11 Day(s)
11 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines Round Flanged, One End Double Stepped and Threaded / One End Tapped
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Stepped and Threaded Tapped - SUJ2 Equivalent - Days to Ship: 11 Day(s)
11 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines Key Provided Straight Nut, One End Tapped
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Tapped Standard - SUJ2 Equivalent - Days to Ship: 11 Day(s)
11 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines Round Flanged, One End Tapped
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Tapped Standard - SUJ2 Equivalent - Days to Ship: 11 Day(s)
11 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines Key Provided Straight Nut, One End Stepped
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Stepped Standard - SUJ2 Equivalent - Days to Ship: 11 Day(s)
11 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines Key Provided Straight Nut, One End Double Stepped and Threaded / One End Tapped
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Stepped and Threaded Tapped - SUJ2 Equivalent - Days to Ship: 11 Day(s)
11 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines Key Provided Straight Nut, One End Double Stepped and Threaded
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Stepped and Threaded Standard - SUJ2 Equivalent - Days to Ship: 11 Day(s)
11 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines Round Flanged, One End Double Stepped and Threaded
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Stepped and Threaded Standard - SUJ2 Equivalent - Days to Ship: 11 Day(s)
11 Day(s)
| Brand |
|---|
| Product Series |
| CAD |
| From |
| Days to Ship |
| Nut Type |
| Spline Shaft Outer Dia. D(Ø) |
| Type |
| Nut Length |
| Nut Overall Length L1(mm) |
| Nut Outer Dia. D1(Ø) |
| Preload |
| Accuracy Grade |
| End Shape (Left) |
| End Shape (Right) |
| Torque |
| Shaft material |
| Number of Nuts(pc(s).) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Ball Splines Round Flanged, One End Double Stepped and Threaded / One End Tapped | Ball Splines Key Provided Straight Nut, One End Double Stepped and Threaded / One End Tapped | Ball Splines Key Provided Straight Nut, One End Double Stepped and Threaded | Ball Splines Round Flanged, One End Double Stepped and Threaded | |||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| From | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Days to Ship | 10 Day(s) or more | 11 Day(s) | 10 Day(s) or more | 11 Day(s) | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 11 Day(s) | 10 Day(s) or more | 10 Day(s) or more | 11 Day(s) | 10 Day(s) or more | 11 Day(s) | 10 Day(s) or more | 11 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) |
| Nut Type | Key Provided Type / Flanged Type | Flanged Type | Key Provided Type / Flanged Type | Flanged Type | Key Provided Type / Flanged Type | Key Provided Type / Flanged Type | Key Provided Type / Flanged Type | Flanged Type | Key Provided Type / Flanged Type | Key Provided Type / Flanged Type | Flanged Type | Key Provided Type / Flanged Type | Flanged Type | Key Provided Type / Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type |
| Spline Shaft Outer Dia. D(Ø) | 6 ～ 30.8 | 8 ～ 30 | 6 ～ 30.8 | 8 ～ 30 | 8 ～ 30.8 | 6 ～ 30.8 | 6 ～ 30.8 | 8 ～ 30 | 6 ～ 30.8 | 6 ～ 30.8 | 8 ～ 30 | 6 ～ 30.8 | 8 ～ 30 | 6 ～ 30.8 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 |
| Type | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid |
| Nut Length | Standard | - | Standard | - | Standard | Standard | Standard | - | Standard | Standard | - | Standard | - | Standard | - | - | - | - | - | - | - | - | - |
| Nut Overall Length L1(mm) | 25 ～ 80 | - | 25 ～ 80 | - | 25 ～ 80 | 25 ～ 80 | 25 ～ 80 | - | 25 ～ 80 | 25 ～ 80 | - | 25 ～ 80 | - | 25 ～ 80 | - | - | - | - | - | - | - | - | - |
| Nut Outer Dia. D1(Ø) | 14 ～ 47 | - | 14 ～ 47 | - | 16 ～ 47 | 14 ～ 47 | 14 ～ 47 | - | 14 ～ 47 | 14 ～ 47 | - | 14 ～ 47 | - | 14 ～ 47 | - | - | - | - | - | - | - | - | - |
| Preload | Standard | - | Standard | - | Standard | Standard | Standard | - | Standard | Standard | - | Standard | - | Standard | - | - | - | - | - | - | - | - | - |
| Accuracy Grade | Standard Grade | - | Standard Grade | - | Standard Grade | Standard Grade | Standard Grade | - | Standard Grade | Standard Grade | - | Standard Grade | - | Standard Grade | - | - | - | - | - | - | - | - | - |
| End Shape (Left) | Standard | Tapped | Tapped | Standard | Stepped and Tapped | Tapped | Stepped and Threaded | Stepped | Stepped and Threaded | Stepped | Standard | Stepped | Tapped | Stepped and Threaded | Stepped | Stepped | Stepped and Threaded | Tapped | Tapped | Stepped | Stepped and Threaded | Stepped and Threaded | Stepped and Threaded |
| End Shape (Right) | Standard | Tapped | Tapped | Standard | Stepped and Tapped | Standard | Stepped and Threaded | Standard | Tapped | Standard | Standard | Stepped | Tapped | Standard | Stepped | Stepped | Tapped | Standard | Standard | Standard | Tapped | Standard | Standard |
| Torque | Middle Torque | - | Middle Torque | - | Middle Torque | Middle Torque | Middle Torque | - | Middle Torque | Middle Torque | - | Middle Torque | - | Middle Torque | - | - | - | - | - | - | - | - | - |
| Shaft material | SUS440C Equivalent / SUJ2 Equivalent | SUJ2 Equivalent | SUS440C Equivalent / SUJ2 Equivalent | SUJ2 Equivalent | SUS440C Equivalent / SUJ2 Equivalent | SUS440C Equivalent / SUJ2 Equivalent | SUS440C Equivalent / SUJ2 Equivalent | SUJ2 Equivalent | SUS440C Equivalent / SUJ2 Equivalent | SUS440C Equivalent / SUJ2 Equivalent | SUJ2 Equivalent | SCM415 Equivalent / SUS440C Equivalent | SUJ2 Equivalent | SUS440C Equivalent / SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent |
| Number of Nuts(pc(s).) | 1 ～ 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Spline Shaft Outer Dia. D(Ø)
-
Type
- Solid
- Hollow
- Polygonal
-
Nut Length
-
Nut Overall Length L1(mm)
-
Nut Outer Dia. D1(Ø)
-
Preload
-
Accuracy Grade
-
End Shape (Left)
-
Standard -
Tapped -
Stepped -
Stepped and Tapped -
Stepped and Threaded
-
-
End Shape (Right)
-
Standard -
Tapped -
Stepped -
Stepped and Tapped -
Stepped and Threaded
-
-
Torque
- Middle Torque
-
Shaft material
- SCM415 Equivalent
- SUS440C Equivalent
- SUS304
- SUJ2 Equivalent
-
Number of Nuts(pc(s).)
How can we improve?
How can we improve?
Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy
Thank you for your cooperation.
Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.
Privacy Policy