MISUMI Roughing End Mills (Carbide)（work material：Cast Iron）

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide Roughing End Mill

  MISUMI

  [Features]
  ・High-speed rotation is possible by adopting a 45° helix.
  ・Using a fine pitch nick, the surface roughness after processing is also excellent.
  ・The conductivity is minimal.
  《Additional machining》
  ・Additional neck relief machining can be specified using MISUMI standard tools.
  ・No need to create drawings. You can order by simply specifying the dimensions using the model number.
  ・Available starting from 1 piece, ``just the quantity you need when you need it.''
  ・Delivered on the 3rd day.
  

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 12	8 ～ 30	-	6 ～ 12	3 ～ 4	50 ～ 80	Cast Iron[◎]	-	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	-	-	Roughing

  From: ₹ 3,128.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAC series carbide roughing end mill, fine pitch / regular model

  MISUMI

  Strongly supports the cost reduction of roughing with the limited special price for standard sizes

  • TiAlN
  • General Steel
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	16 ～ 38	-	6 ～ 20	3 ～ 4	57 ～ 104	Cast Iron[○]	Weak torsion (15 to 25˚)	Plane / Side / Groove / Inclined Cuts	TiAlN	C plane	Roughing

  From: ₹ 3,336.78
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, fine pitch / short model

  MISUMI

  [Features]
  ·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20	10 ～ 38	17 ～ 66	6 ～ 20	4	57 ～ 104	Cast Iron[○]	Weak torsion (15 to 25˚)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Micro R	Roughing

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, 45° spiral / fine pitch / regular model

  MISUMI

  [Features]
  ·High-speed rotation processing is possible by adopting 45° helix angle
  ·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	15 ～ 45	20 ～ 92	6 ～ 20	3 ～ 4	60 ～ 130	Cast Iron[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	C plane	Roughing

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, fine pitch / regular model

  MISUMI

  [Features]
  ·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	15 ～ 45	20 ～ 92	6 ～ 20	3 ～ 4	60 ～ 130	Cast Iron[○]	Weak torsion (15 to 25˚)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Micro R	Roughing

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, fine pitch / long model

  MISUMI

  [Features]
  ·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	25 ～ 65	30 ～ 112	6 ～ 20	4	100 ～ 150	Cast Iron[○]	Weak torsion (15 to 25˚)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Micro R	Roughing

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, fine pitch / long regular model

  MISUMI

  [Features]
  ·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
  ·Long shank type ideal for deep cavity milling
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20	15 ～ 45	20 ～ 95	6 ～ 20	3 ～ 4	100 ～ 150	Cast Iron[○]	Weak torsion (15 to 25˚)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Micro R	Roughing

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, 45° spiral / fine pitch / short model

  MISUMI

  [Features]
  ·High-speed rotation processing is possible by adopting 45° helix angle
  ·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20	10 ～ 38	17 ～ 72	6 ～ 20	3 ～ 4	60 ～ 110	Cast Iron[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	C plane	Roughing

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, 45° spiral / fine pitch / long model

  MISUMI

  [Features]
  ·High-speed rotation processing is possible by adopting 45° helix angle
  ·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	25 ～ 65	30 ～ 112	6 ～ 20	3 ～ 4	100 ～ 150	Cast Iron[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	C plane	Roughing

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	VAC Series Carbide Roughing End Mill	XAC series carbide roughing end mill, fine pitch / regular model	TSC series carbide roughing end mill, fine pitch / short model	TSC series carbide roughing end mill, 45° spiral / fine pitch / regular model	TSC series carbide roughing end mill, fine pitch / regular model	TSC series carbide roughing end mill, fine pitch / long model	TSC series carbide roughing end mill, fine pitch / long regular model	TSC series carbide roughing end mill, 45° spiral / fine pitch / short model	TSC series carbide roughing end mill, 45° spiral / fine pitch / long model
From	₹ 3,128.00-	₹ 3,336.78-	-	-	-	-	-	-	-
Days to Ship	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Specifications		TiAlN General Steel R (Regular)	TS General Steel 4 Flutes S (Short)	TS General Steel R (Regular)	TS General Steel R (Regular)	TS General Steel 4 Flutes L (Long)	TS General Steel R (Regular)	TS General Steel S (Short)	TS General Steel L (Long)
Blade diameter (D)(φ)	3 ～ 12	6 ～ 20	5 ～ 20	3 ～ 20	3 ～ 20	6 ～ 20	5 ～ 20	5 ～ 20	6 ～ 20
Blade length (ℓ)(mm)	8 ～ 30	16 ～ 38	10 ～ 38	15 ～ 45	15 ～ 45	25 ～ 65	15 ～ 45	10 ～ 38	25 ～ 65
Underneck length (ℓ1)(mm)	-	-	17 ～ 66	20 ～ 92	20 ～ 92	30 ～ 112	20 ～ 95	17 ～ 72	30 ～ 112
Shank diameter (d)(mm)	6 ～ 12	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20
Number of flutes(sheet)	3 ～ 4	3 ～ 4	4	3 ～ 4	3 ～ 4	4	3 ～ 4	3 ～ 4	3 ～ 4
Overall Length (L)(mm)	50 ～ 80	57 ～ 104	57 ～ 104	60 ～ 130	60 ～ 130	100 ～ 150	100 ～ 150	60 ～ 110	100 ～ 150
work material	Cast Iron[◎]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]
Torsion Angle (θ)	-	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Powerful Torsion (45°-60°)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)
Machining Application	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts
Coating	-	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)
Blade tip shape	-	C plane	Micro R	C plane	Micro R	Micro R	Micro R	C plane	C plane
Type	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing

Loading...