MISUMI High Helical End Mills (Carbide)

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide high-helical end mill (cutting edge deflection accuracy of 5 μm or less)

  MISUMI

  [Features]
  ·Cutting edge runout accuracy within 5 µm (compared to the manufacturer measurements), back taper within 5 µm, and shank diameter tolerance h5 standards are used, making it ideal for side surface finishing that requires high precision using high-quality tools with little variation in quality
  ·Designed with blade shape that emphasizes sharpness with positive blade and cutting edge sharp corner suitable for raw material processing such as carbon steel

  • TS
  • General Steel
  • Multi-Flutes （5 ~）
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 12	10 ～ 30	-	6 ～ 12	4 ～ 6	60 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Sharp Edge	High Helical

  From: ₹ 5,207.64
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAC series carbide high-helical end mill, for high-hardness steel machining, multi-blade, 45° torsion / regular model

  MISUMI

  [Features]
  ·Designed with tool shape that increases rigid for machining high hardness steel
  ·Because it is designed with large rake angle, it can be used even on machines where cutting speed does not increase
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TiAlN
  • High-Hardness Steel
  • Multi-Flutes （5 ~）

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 25	13 ～ 44	-	6 ～ 25	6 ～ 8	57 ～ 104	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[○] / Cast Iron[○]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	TiAlN	With Lead	High Helical

  From: ₹ 2,464.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAC series carbide high-helical end mill for high-hardness steel machining, multi-blade, 45° torsion / long model

  MISUMI

  The expensive long flute type for high hardness is offered at an affordable price

  • TiAlN
  • High-Hardness Steel
  • Multi-Flutes （5 ~）

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	26 ～ 76	-	6 ～ 20	6 ～ 8	70 ～ 140	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[○] / Cast Iron[○]	Powerful Torsion (45°-60°)	Plane / Side	TiAlN	With Lead	High Helical

  From: ₹ 2,480.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide high-helical end mill (for shrink fit holder / cutting edge deflection accuracy of 5μm or Less). Multi-flute, 53° spiral / stub model

  MISUMI

  The high precision high helical end mill for shrink fit holder is ideal for side finishing

  • TS
  • General Steel
  • Multi-Flutes （5 ~）
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 12	4.5 ～ 18	-	6 ～ 12	4 ～ 6	50 ～ 75	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Sharp Edge	High Helical

  From: ₹ 5,438.82
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model

  MISUMI

  [Features]
  ·In machining of raw material, heat-treated steel, aluminum, etc., pocket standing wall finishing of mold base (main mold), etc., demonstrate strength, thanks to positive rake angle, sharp corners of bottom edge, and 53° strong helix angle
  ·High tool rigidity minimizes tool tilt during side milling

  • TS
  • General Steel
  • Multi-Flutes （5 ~）
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	2 ～ 24	17 ～ 70	6 ～ 12	4 ～ 6	60 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Sharp Edge	High Helical

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide high-helical end mill, multi-flute, 53° spiral / regular model

  MISUMI

  [Features]
  ·In machining of raw material, heat-treated steel, aluminum, etc., pocket standing wall finishing of mold base (main mold), etc., demonstrate strength, thanks to positive rake angle, sharp corners of bottom edge, and 53° strong helix angle
  ·High tool rigidity minimizes tool tilt during side milling

  • TS
  • General Steel
  • Multi-Flutes （5 ~）
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	2.5 ～ 45	20 ～ 92	6 ～ 20	4 ～ 6	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Sharp Edge	High Helical

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	TSC series carbide high-helical end mill (cutting edge deflection accuracy of 5 μm or less)	XAC series carbide high-helical end mill, for high-hardness steel machining, multi-blade, 45° torsion / regular model	XAC series carbide high-helical end mill for high-hardness steel machining, multi-blade, 45° torsion / long model	TSC series carbide high-helical end mill (for shrink fit holder / cutting edge deflection accuracy of 5μm or Less). Multi-flute, 53° spiral / stub model	TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model	TSC series carbide high-helical end mill, multi-flute, 53° spiral / regular model
From	₹ 5,207.64-	₹ 2,464.00-	₹ 2,480.00-	₹ 5,438.82-	-	-
Days to Ship	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Specifications	TS General Steel Multi-Flutes （5 ~） R (Regular)	TiAlN High-Hardness Steel Multi-Flutes （5 ~）	TiAlN High-Hardness Steel Multi-Flutes （5 ~）	TS General Steel Multi-Flutes （5 ~） B (Stub)	TS General Steel Multi-Flutes （5 ~） S (Short)	TS General Steel Multi-Flutes （5 ~） R (Regular)
Blade diameter (D)(φ)	3 ～ 12	6 ～ 25	6 ～ 20	3 ～ 12	1 ～ 12	1 ～ 20
Blade length (ℓ)(mm)	10 ～ 30	13 ～ 44	26 ～ 76	4.5 ～ 18	2 ～ 24	2.5 ～ 45
Underneck length (ℓ1)(mm)	-	-	-	-	17 ～ 70	20 ～ 92
Shank diameter (d)(mm)	6 ～ 12	6 ～ 25	6 ～ 20	6 ～ 12	6 ～ 12	6 ～ 20
Number of flutes(sheet)	4 ～ 6	6 ～ 8	6 ～ 8	4 ～ 6	4 ～ 6	4 ～ 6
Overall Length (L)(mm)	60 ～ 100	57 ～ 104	70 ～ 140	50 ～ 75	60 ～ 100	60 ～ 130
work material	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]
Torsion Angle (θ)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)
Machining Application	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts
Coating	For High Hardness (Silicon Group)	TiAlN	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)
Blade tip shape	Sharp Edge	With Lead	With Lead	Sharp Edge	Sharp Edge	Sharp Edge
Type	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical

Loading...