MISUMI Multi-Function Square End Mills (Carbide)（work material：Cast Iron）

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	5 ～ 75	30 ～ 112	6 ～ 20	4	60 ～ 150	Cast Iron[○]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  
  ·Due to the unique chip gullet shape, groove cutting can be performed with a cutting depth comparable to that of a 2-flute.
  ·By applying rounded blade to the rear end of the flute, it suppresses processing streaks that occur during multi-stage processing of the side surface. (product in Fig. 3 only)
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 22	3.5 ～ 30	30 ～ 140	6 ～ 20	4	80 ～ 200	Cast Iron[○]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  From: ₹ 3,584.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model

  MISUMI

  Introducing a long type with 45° spiral in the popular XAL Series

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	5 ～ 60	-	4 ～ 12	4	45 ～ 105	Cast Iron[◎]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 1,565.15
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model

  MISUMI

  The new "standard" square end mill with 45° spiral is available at an ultra-low price

  • Volume Discount

  • XAL
  • General Steel
  • 3 Flutes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	1.5 ～ 26	-	4 ～ 12	3	45 ～ 100	Cast Iron[○/◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 1,351.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model

  MISUMI

  The new "standard" square end mill with 45° spiral is available at an ultra-low price

  • Volume Discount

  • XAL
  • General Steel
  • 4 Flutes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	5 ～ 38	-	4 ～ 20	4	45 ～ 125	Cast Iron[○/◎]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 1,256.71
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·By applying rounded blade to the rear end of the flute, it suppresses processing streaks that occur during multi-stage processing of the side surface (product in Fig. 3 only)
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	3.5 ～ 30	30 ～ 140	6 ～ 20	3	80 ～ 200	Cast Iron[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  From: ₹ 4,339.18
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·By adopting stub flute length that is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface while suppressing chattering
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	1.5 ～ 18	14 ～ 68	6 ～ 12	3	60 ～ 100	Cast Iron[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	3 ～ 38	18 ～ 73	4 ～ 20	3	60 ～ 110	Cast Iron[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·This product has an intermediate flute length between TSC-HEM3S (short flute length) and TSC-HEM3R (regular flute length), so it is called "SR flute length."
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 3 Flutes
  • SR

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 16	5 ～ 40	22 ～ 78	6 ～ 16	3	60 ～ 110	Cast Iron[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	4 ～ 56	26 ～ 92	6 ～ 20	3	60 ～ 130	Cast Iron[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	5 ～ 75	30 ～ 112	6 ～ 20	3	60 ～ 150	Cast Iron[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·By adopting stub flute length that is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface while suppressing chattering
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 16	1.5 ～ 24	14 ～ 74	6 ～ 16	4	60 ～ 110	Cast Iron[○]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	3 ～ 38	18 ～ 72	4 ～ 20	4	60 ～ 110	Cast Iron[○]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·This product has an intermediate flute length between TSC-HEM4S (short flute length) and TSC-HEM4R (regular flute length), so it is called "SR flute length."
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • SR

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 16	5 ～ 40	22 ～ 78	6 ～ 16	4	60 ～ 110	Cast Iron[○]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	4 ～ 56	26 ～ 92	6 ～ 20	4	60 ～ 130	Cast Iron[○]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type / Plunge Z Mill

  MISUMI

  MISUMI's original "Z mill" that's thoroughly focused on the thrusting performance

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 12	8 ～ 26	-	6 ～ 12	4	60 ～ 100	Cast Iron[○]	Powerful Torsion (45°-60°)	Plane / Side / Plunging (Z feed) / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  From: ₹ 2,512.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  (Economy series) XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model

  MISUMI

  Introducing a regular type with 45° spiral in the popular XAL Series

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	4 ～ 48	-	4 ～ 12	4	45 ～ 105	Cast Iron[◎]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: ₹ 1,284.84
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide 4-Flute Uneven Lead Square End Mill

  MISUMI

  [Features]
  ·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
  ·Suppresses chattering with unequal lead and unequal flutes
  ·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
  ·Stable machining is possible while maintaining finished surface accuracy
  ·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	6 ～ 45	-	6 ～ 20	4	50 ～ 100	Cast Iron[○]	-	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	-	-	Square

  From: ₹ 2,125.22
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)

  MISUMI

  [Features]
  ・Adopts unequal leads to suppress chatter and achieve high efficiency machining
  ・Optimum groove shape realizes smooth chip discharge
  ・Minimum electrical conductivity
  ・Can be re-polished.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 25	8 ～ 38	-	6 ～ 25	4	57 ～ 104	Cast Iron[◎]	-	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	-	-	Square

  From: ₹ 2,089.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)

  MISUMI

  [Features]
  ·Chattering is suppressed by unequal leads and unequal flutes. Stable machining is possible while maintaining finished surface accuracy
  ·Ultra-fine grain cemented carbide base material is used. Coating with excellent adhesion and heat resistance enables processing under high-speed conditions
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	7 ～ 26	-	6 ～ 20	4	54 ～ 92	Cast Iron[◎]	-	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	-	-	Square

  From: ₹ 1,862.64
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model	XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model	XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model	XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model	TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model	TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type / Plunge Z Mill	(Economy series) XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model	VAC Series Carbide 4-Flute Uneven Lead Square End Mill	VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)	VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)
From	-	₹ 3,584.00-	₹ 1,565.15-	₹ 1,351.00-	₹ 1,256.71-	₹ 4,339.18-	-	-	-	-	-	-	-	-	-	₹ 2,512.00-	₹ 1,284.84-	₹ 2,125.22-	₹ 2,089.00-	₹ 1,862.64-
Days to Ship	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Specifications	TS General Steel 4 Flutes L (Long)	TS General Steel 4 Flutes S (Short)		XAL General Steel 3 Flutes	XAL General Steel 4 Flutes	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes B (Stub)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes SR	TS General Steel 3 Flutes R (Regular)	TS General Steel 3 Flutes L (Long)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes SR	TS General Steel 4 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)
Blade diameter (D)(φ)	2 ～ 20	2 ～ 22	1 ～ 12	1 ～ 12	2 ～ 20	2 ～ 20	1 ～ 12	1 ～ 20	3 ～ 16	1 ～ 20	2 ～ 20	1 ～ 16	1 ～ 20	3 ～ 16	1 ～ 20	3 ～ 12	1 ～ 12	2 ～ 20	3 ～ 25	3 ～ 20
Blade length (ℓ)(mm)	5 ～ 75	3.5 ～ 30	5 ～ 60	1.5 ～ 26	5 ～ 38	3.5 ～ 30	1.5 ～ 18	3 ～ 38	5 ～ 40	4 ～ 56	5 ～ 75	1.5 ～ 24	3 ～ 38	5 ～ 40	4 ～ 56	8 ～ 26	4 ～ 48	6 ～ 45	8 ～ 38	7 ～ 26
Underneck length (ℓ1)(mm)	30 ～ 112	30 ～ 140	-	-	-	30 ～ 140	14 ～ 68	18 ～ 73	22 ～ 78	26 ～ 92	30 ～ 112	14 ～ 74	18 ～ 72	22 ～ 78	26 ～ 92	-	-	-	-	-
Shank diameter (d)(mm)	6 ～ 20	6 ～ 20	4 ～ 12	4 ～ 12	4 ～ 20	6 ～ 20	6 ～ 12	4 ～ 20	6 ～ 16	6 ～ 20	6 ～ 20	6 ～ 16	4 ～ 20	6 ～ 16	6 ～ 20	6 ～ 12	4 ～ 12	6 ～ 20	6 ～ 25	6 ～ 20
Number of flutes(sheet)	4	4	4	3	4	3	3	3	3	3	3	4	4	4	4	4	4	4	4	4
Overall Length (L)(mm)	60 ～ 150	80 ～ 200	45 ～ 105	45 ～ 100	45 ～ 125	80 ～ 200	60 ～ 100	60 ～ 110	60 ～ 110	60 ～ 130	60 ～ 150	60 ～ 110	60 ～ 110	60 ～ 110	60 ～ 130	60 ～ 100	45 ～ 105	50 ～ 100	57 ～ 104	54 ～ 92
work material	Cast Iron[○]	Cast Iron[○]	Cast Iron[◎]	Cast Iron[○/◎]	Cast Iron[○/◎]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[◎]	Cast Iron[○]	Cast Iron[◎]	Cast Iron[◎]
Torsion Angle (θ)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	-	-	-
Machining Application	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Plunging (Z feed) / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking
Coating	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	-	-	-
Blade tip shape	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	With Lead	Sharp Edge / With Lead	With Lead	Sharp Edge / With Lead	With Lead	With Lead	-	-	-
Type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square

Loading...