(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
119 items
You can add up to 6 items per a category to the compare list.
Carbide square end mill, 2-flute / 3D Flute Length (regular) model
MISUMI
The 3D flute length type that produces high-quality finish supports a wide range of machining areas
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.2 ~ 12 | 0.6 ~ 36 | 23 ~ 55 | 3 ~ 12 | 2 | 40 ~ 85 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts / Countersinking | Non-Coated | Sharp Edge / With Lead | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model
MISUMI
The price of the low-cost classic XAL Series has been further reduced!
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 20 | 0.2 ~ 40 | - | 3 ~ 20 | 2 | 40 ~ 110 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model
MISUMI
Popular XAL Series with the 4-flute structure that's ideal for side milling has been further reduced in price!
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 2 ~ 40 | - | 4 ~ 20 | 4 | 40 ~ 110 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
VAC Series Carbide Roughing End Mill
MISUMI
[Features]
・High-speed rotation is possible by adopting a 45° helix.
・Using a fine pitch nick, the surface roughness after processing is also excellent.
・The conductivity is minimal.
《Additional machining》
・Additional neck relief machining can be specified using MISUMI standard tools.
・No need to create drawings. You can order by simply specifying the dimensions using the model number.
・Available starting from 1 piece, ``just the quantity you need when you need it.''
・Delivered on the 3rd day.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 12 | 8 ~ 30 | - | 6 ~ 12 | 3 ~ 4 | 50 ~ 80 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | - | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | - | - | Roughing |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model
MISUMI
The Misumi's unique lineup of fine flute length is available at attractive low prices
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 20 | 0.3 ~ 60 | - | 3 ~ 20 | 2 | 40 ~ 110 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model
MISUMI
[Features]
·In machining of raw material, heat-treated steel, aluminum, etc., pocket standing wall finishing of mold base (main mold), etc., demonstrate strength, thanks to positive rake angle, sharp corners of bottom edge, and 53° strong helix angle
·High tool rigidity minimizes tool tilt during side milling
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 12 | 2 ~ 24 | 17 ~ 70 | 6 ~ 12 | 4 ~ 6 | 60 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Inclined Cuts | For High Hardness (Silicon Group) | Sharp Edge | High Helical |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Square End Mill for Aluminum Machining, 4-Flute / Regular Model
MISUMI
[Features]
·Uses a sharp cutting edge to suppress the built-up edge unique to aluminum
·The unique chip pocket shape enables grooving with a depth of cut equivalent to that of a 2-flute cutting tool.
·Can be re-polished. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.5 ~ 12 | 1.5 ~ 28 | 22 ~ 50 | 4 ~ 12 | 4 | 40 ~ 80 | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Powerful Torsion (45°-60°) | Plane / Side / Inclined Cuts | Non-Coated | Sharp Edge | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model
MISUMI
The long-awaited long-neck type joins the popular XAL Series
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 6 | 0.2 ~ 9 | 0.3 ~ 60 | 4 ~ 6 | 2 | 50 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Long-Neck Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Effective for processing deep parts due to extra long blade length
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1.5 ~ 25 | 6 ~ 120 | - | 4 ~ 25 | 4 | 60 ~ 250 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | - | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | - | - | Square |
From: ₹ 2,168.07 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·By adopting stub flute length that is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface while suppressing chattering
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 12 | 1.5 ~ 18 | 14 ~ 68 | 6 ~ 12 | 3 | 60 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Inclined Cuts | For High Hardness (Silicon Group) | With Lead | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide square end mill, 4-flute / 4D Flute Length (long) model
MISUMI
Achieves both high levels of machining precision and reduction of processing time in side milling
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 12 | 4 ~ 48 | 29 ~ 70 | 4 ~ 12 | 4 | 45 ~ 100 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Standard torsion (30-40°) | Plane / Side / Inclined Cuts | Non-Coated | Sharp Edge / With Lead | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide long neck square end mill, 2-flute / long neck model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Can select optimal body length for processing deep parts of workpiece
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 6 | 0.2 ~ 10 | 0.3 ~ 60 | 4 ~ 6 | 2 | 40 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Standard torsion (30-40°) / Powerful Torsion (45°-60°) | Plane / Side / Groove / Inclined Cuts / Countersinking | For High Hardness (Silicon Group) | Sharp Edge / With Lead | Long-Neck Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model
MISUMI
Demonstrates phenomenal performance in processing the difficult-to-cut SUS304
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 16 | 7 ~ 35 | - | 6 ~ 16 | 3 | 60 ~ 105 | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Inclined Cuts / Countersinking | For High Hardness (Silicon Group) | C plane | Square |
From: ₹ 4,039.16 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Regular Model
MISUMI
The CrN coating with excellent lubricity exhibits power in copper electrode processing
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.5 ~ 12 | 1.5 ~ 36 | - | 4 ~ 12 | 2 | 50 ~ 90 | Aluminum[○] / Copper[◎] / Resin[○] | Weak torsion (15 to 25˚) | Plane / Side / Groove / Inclined Cuts | CrN | Sharp Edge | Square |
From: ₹ 1,440.20 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Long Neck Model
MISUMI
[Features]
·Long neck shape prevents tool interference during deep cutting (body length can be selected according to machining).
·Since the cutting edge has been processed into a sharp corner, it is also possible to machining corner edges
·CrN coating with excellent lubricity is ideal for copper electrode processing
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.5 ~ 3 | 0.7 ~ 4.5 | 2 ~ 40 | 4 ~ 6 | 2 | 50 ~ 100 | Aluminum[○] / Copper[◎] / Resin[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | CrN | Sharp Edge | Square |
From: ₹ 2,447.44 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
XAL Coated Carbide Long Neck Square End Mill, 4-Flute / Long Neck Model
MISUMI
The price that's only achievable by XAL Series! Introducing the 4-flute long neck
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 6 | 1.5 ~ 9 | 4 ~ 50 | 4 ~ 6 | 4 | 50 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | Standard torsion (30-40°) | Plane / Side / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Long-Neck Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
VAC Series Carbide 2-Flute Square End Mill
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·General purpose blade length regular type 2-flute
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.3 ~ 20 | 0.6 ~ 45 | - | 4 ~ 20 | 2 | 40 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | - | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | - | - | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model
MISUMI
The new "standard" square end mill with 45° spiral is available at an ultra-low price
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 12 | 1.5 ~ 26 | - | 4 ~ 12 | 3 | 45 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model
MISUMI
The new "standard" square end mill with 45° spiral is available at an ultra-low price
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
2 ~ 20 | 5 ~ 38 | - | 4 ~ 20 | 4 | 45 ~ 125 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | Powerful Torsion (45°-60°) | Plane / Side / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·By applying rounded blade to the rear end of the flute, it suppresses processing streaks that occur during multi-stage processing of the side surface (product in Fig. 3 only)
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
2 ~ 20 | 3.5 ~ 30 | 30 ~ 140 | 6 ~ 20 | 3 | 80 ~ 200 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | For High Hardness (Silicon Group) | With Lead | Square |
From: ₹ 4,339.18 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 4 ~ 56 | 26 ~ 92 | 6 ~ 20 | 4 | 60 ~ 130 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Inclined Cuts | For High Hardness (Silicon Group) | Sharp Edge / With Lead | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide square end mill, 4-flute / 3D Flute Length (regular) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·General-purpose 4-flute end mill for a wide range of applications
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 3 ~ 60 | 23 ~ 92 | 4 ~ 20 | 4 | 45 ~ 130 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Standard torsion (30-40°) | Plane / Side / Inclined Cuts | For High Hardness (Silicon Group) | Sharp Edge / With Lead | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide square end mill, 4-flute / 4D Flute Length (long) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·General-purpose 4-flute end mill for a wide range of applications
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 12 | 4 ~ 48 | 29 ~ 70 | 4 ~ 12 | 4 | 45 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Standard torsion (30-40°) | Plane / Side / Inclined Cuts | For High Hardness (Silicon Group) | Sharp Edge / With Lead | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide high-helical end mill (cutting edge deflection accuracy of 5 μm or less)
MISUMI
[Features]
·Cutting edge runout accuracy within 5 µm (compared to the manufacturer measurements), back taper within 5 µm, and shank diameter tolerance h5 standards are used, making it ideal for side surface finishing that requires high precision using high-quality tools with little variation in quality
·Designed with blade shape that emphasizes sharpness with positive blade and cutting edge sharp corner suitable for raw material processing such as carbon steel
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 12 | 10 ~ 30 | - | 6 ~ 12 | 4 ~ 6 | 60 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Inclined Cuts | For High Hardness (Silicon Group) | Sharp Edge | High Helical |
From: ₹ 5,207.64 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
XAC series carbide roughing end mill, fine pitch / regular model
MISUMI
Strongly supports the cost reduction of roughing with the limited special price for standard sizes
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 20 | 16 ~ 38 | - | 6 ~ 20 | 3 ~ 4 | 57 ~ 104 | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Weak torsion (15 to 25˚) | Plane / Side / Groove / Inclined Cuts | TiAlN | C plane | Roughing |
From: ₹ 3,336.78 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide roughing end mill, 45° spiral / fine pitch / regular model
MISUMI
[Features]
·High-speed rotation processing is possible by adopting 45° helix angle
·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 20 | 15 ~ 45 | 20 ~ 92 | 6 ~ 20 | 3 ~ 4 | 60 ~ 130 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Inclined Cuts | For High Hardness (Silicon Group) | C plane | Roughing |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Diamond Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / Regular Model
MISUMI
Demonstrates the tremendous durability and finishing precision in aluminum machining
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 12 | 3 ~ 36 | - | 4 ~ 12 | 2 | 40 ~ 80 | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Inclined Cuts | Dia Coat | Sharp Edge | Square |
From: ₹ 5,984.00 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 4D Flute Length (Long) Model
MISUMI
4D flute length type that's ideal for deep engraving
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 12 | 5 ~ 48 | 29 ~ 70 | 6 ~ 12 | 2 | 60 ~ 100 | Aluminum[◎] / Copper[○] / Resin[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Inclined Cuts / Countersinking | DLC | Sharp Edge | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model
MISUMI
3-flute structure that's excellent in discharging chips
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 12 | 2 ~ 24 | 17 ~ 50 | 4 ~ 12 | 3 | 40 ~ 80 | Aluminum[◎] / Copper[○] / Resin[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Inclined Cuts / Countersinking | DLC | With Lead | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Diamond Coated Carbide Square End Mill for Graphite Machining, 4-Flute / Long Model
MISUMI
The premium diamond coated products are available at the industry's lowest price
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
2 ~ 12 | 10 ~ 60 | 20 ~ 85 | 4 ~ 12 | 4 | 75 ~ 200 | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Standard torsion (30-40°) | Plane / Side / Inclined Cuts | Dia Coat | Sharp Edge | Square |
From: ₹ 8,656.00 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Square End Mill for Resin Machining, 2-Flute / Regular Model
MISUMI
The cutting edge with an emphasis on sharpness is ideal for resin machining
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.3 ~ 16 | 0.9 ~ 48 | - | 3 ~ 16 | 2 | 45 ~ 110 | Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | Non-Coated | Sharp Edge | Square |
From: ₹ 1,316.80 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Long Neck Square End Mill for Resin Machining, 2-Flute / Stub, Long Neck Model
MISUMI
End mill for resin that's capable of deep engraving
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.3 ~ 6 | 0.6 ~ 15 | 2.5 ~ 52 | 3 ~ 6 | 2 | 50 ~ 80 | Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | Non-Coated | Sharp Edge | Long-Neck Square |
From: ₹ 1,509.84 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model
MISUMI
Popular sizes that support deeper side milling are available in XAL Series
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 12 | 4 ~ 48 | - | 4 ~ 12 | 4 | 45 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
Days to Ship: Same day or more |
You can add up to 6 items per a category to the compare list.
VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model)
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Effective for processing deep parts due to extra long blade length
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 4 ~ 80 | - | 6 ~ 20 | 2 | 60 ~ 200 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] | - | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | - | - | Square |
From: ₹ 2,012.71 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
VAC Series Carbide 4-Flute Uneven Lead Square End Mill
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Suppresses chattering with unequal lead and unequal flutes
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Stable machining is possible while maintaining finished surface accuracy
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
2 ~ 20 | 6 ~ 45 | - | 6 ~ 20 | 4 | 50 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | - | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | - | - | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model
MISUMI
The Misumi's original fine intermediate flute length is available at a reasonable price
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 3 ~ 60 | - | 4 ~ 20 | 4 | 45 ~ 130 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
XAC series carbide square end mill, 2-flute / short model
MISUMI
[Specification]
·Standard TiAlN coating
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 2.5 ~ 38 | - | 4 ~ 20 | 2 | 40 ~ 105 | general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | TiAlN | Sharp Edge | Square |
From: ₹ 819.31 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
XAC series carbide square end mill, 4-flute / short model
MISUMI
[Specification]
·Standard TiAlN coating
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
2 ~ 20 | 6 ~ 38 | - | 4 ~ 20 | 4 | 40 ~ 105 | general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Standard torsion (30-40°) | Plane / Side / Inclined Cuts | TiAlN | Sharp Edge | Square |
From: ₹ 896.98 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
XAC series carbide square end mill, 4-flute / long model
MISUMI
User friendly TiAlN coated series with long flute length
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 12 | 12 ~ 30 | - | 6 ~ 12 | 4 | 50 ~ 90 | general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Standard torsion (30-40°) | Plane / Side / Inclined Cuts | TiAlN | Sharp Edge | Square |
From: ₹ 1,635.75 |
---|
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 3 ~ 38 | 18 ~ 73 | 4 ~ 20 | 3 | 60 ~ 110 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | For High Hardness (Silicon Group) | Sharp Edge / With Lead | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·This product has an intermediate flute length between TSC-HEM3S (short flute length) and TSC-HEM3R (regular flute length), so it is called "SR flute length."
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 16 | 5 ~ 40 | 22 ~ 78 | 6 ~ 16 | 3 | 60 ~ 110 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | For High Hardness (Silicon Group) | Sharp Edge / With Lead | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 4 ~ 56 | 26 ~ 92 | 6 ~ 20 | 3 | 60 ~ 130 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | For High Hardness (Silicon Group) | Sharp Edge / With Lead | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
2 ~ 20 | 5 ~ 75 | 30 ~ 112 | 6 ~ 20 | 3 | 60 ~ 150 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | For High Hardness (Silicon Group) | With Lead | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·By adopting stub flute length that is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface while suppressing chattering
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 16 | 1.5 ~ 24 | 14 ~ 74 | 6 ~ 16 | 4 | 60 ~ 110 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Inclined Cuts | For High Hardness (Silicon Group) | With Lead | Square |
Days to Ship: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 3 ~ 38 | 18 ~ 72 | 4 ~ 20 | 4 | 60 ~ 110 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Powerful Torsion (45°-60°) | Plane / Side / Inclined Cuts | For High Hardness (Silicon Group) | Sharp Edge / With Lead | Square |
Days to Ship: 6 Day(s) or more |
Brand |
---|
Product Series |
From |
Days to Ship |
Specifications |
Blade diameter (D)(φ) |
Blade length (ℓ)(mm) |
Underneck length (ℓ1)(mm) |
Shank diameter (d)(mm) |
Number of flutes(sheet) |
Overall Length (L)(mm) |
work material |
Torsion Angle (θ) |
Machining Application |
Coating |
Blade tip shape |
Type |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
Product Series | Carbide square end mill, 2-flute / 3D Flute Length (regular) model | XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model | XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model | (Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model | TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model | Carbide Square End Mill for Aluminum Machining, 4-Flute / Regular Model | XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model | VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model) | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model | Carbide square end mill, 4-flute / 4D Flute Length (long) model | TSC series carbide long neck square end mill, 2-flute / long neck model | TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model | CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Regular Model | CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Long Neck Model | XAL Coated Carbide Long Neck Square End Mill, 4-Flute / Long Neck Model | XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model | XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model | TSC series carbide square end mill, 4-flute / 3D Flute Length (regular) model | TSC series carbide square end mill, 4-flute / 4D Flute Length (long) model | TSC series carbide high-helical end mill (cutting edge deflection accuracy of 5 μm or less) | XAC series carbide roughing end mill, fine pitch / regular model | TSC series carbide roughing end mill, 45° spiral / fine pitch / regular model | Diamond Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / Regular Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 4D Flute Length (Long) Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model | Diamond Coated Carbide Square End Mill for Graphite Machining, 4-Flute / Long Model | Carbide Square End Mill for Resin Machining, 2-Flute / Regular Model | Carbide Long Neck Square End Mill for Resin Machining, 2-Flute / Stub, Long Neck Model | XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model | VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model) | XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model | TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type | ||||||
From | - | - | - | - | - | - | - | - | ₹ 2,168.07- | - | - | - | ₹ 4,039.16- | ₹ 1,440.20- | ₹ 2,447.44- | - | - | - | - | ₹ 4,339.18- | - | - | - | ₹ 5,207.64- | ₹ 3,336.78- | - | ₹ 5,984.00- | - | - | ₹ 8,656.00- | ₹ 1,316.80- | ₹ 1,509.84- | - | ₹ 2,012.71- | - | - | ₹ 819.31- | ₹ 896.98- | ₹ 1,635.75- | - | - | - | - | - | - |
Days to Ship | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
Specifications | |||||||||||||||||||||||||||||||||||||||||||||
Blade diameter (D)(φ) | 0.2 ~ 12 | 0.1 ~ 20 | 1 ~ 20 | 3 ~ 12 | 0.1 ~ 20 | 1 ~ 12 | 0.5 ~ 12 | 0.1 ~ 6 | 1.5 ~ 25 | 1 ~ 12 | 1 ~ 12 | 0.1 ~ 6 | 3 ~ 16 | 0.5 ~ 12 | 0.5 ~ 3 | 1 ~ 6 | 0.3 ~ 20 | 1 ~ 12 | 2 ~ 20 | 2 ~ 20 | 1 ~ 20 | 1 ~ 20 | 1 ~ 12 | 3 ~ 12 | 6 ~ 20 | 3 ~ 20 | 1 ~ 12 | 3 ~ 12 | 1 ~ 12 | 2 ~ 12 | 0.3 ~ 16 | 0.3 ~ 6 | 1 ~ 12 | 1 ~ 20 | 2 ~ 20 | 1 ~ 20 | 1 ~ 20 | 2 ~ 20 | 3 ~ 12 | 1 ~ 20 | 3 ~ 16 | 1 ~ 20 | 2 ~ 20 | 1 ~ 16 | 1 ~ 20 |
Blade length (ℓ)(mm) | 0.6 ~ 36 | 0.2 ~ 40 | 2 ~ 40 | 8 ~ 30 | 0.3 ~ 60 | 2 ~ 24 | 1.5 ~ 28 | 0.2 ~ 9 | 6 ~ 120 | 1.5 ~ 18 | 4 ~ 48 | 0.2 ~ 10 | 7 ~ 35 | 1.5 ~ 36 | 0.7 ~ 4.5 | 1.5 ~ 9 | 0.6 ~ 45 | 1.5 ~ 26 | 5 ~ 38 | 3.5 ~ 30 | 4 ~ 56 | 3 ~ 60 | 4 ~ 48 | 10 ~ 30 | 16 ~ 38 | 15 ~ 45 | 3 ~ 36 | 5 ~ 48 | 2 ~ 24 | 10 ~ 60 | 0.9 ~ 48 | 0.6 ~ 15 | 4 ~ 48 | 4 ~ 80 | 6 ~ 45 | 3 ~ 60 | 2.5 ~ 38 | 6 ~ 38 | 12 ~ 30 | 3 ~ 38 | 5 ~ 40 | 4 ~ 56 | 5 ~ 75 | 1.5 ~ 24 | 3 ~ 38 |
Underneck length (ℓ1)(mm) | 23 ~ 55 | - | - | - | - | 17 ~ 70 | 22 ~ 50 | 0.3 ~ 60 | - | 14 ~ 68 | 29 ~ 70 | 0.3 ~ 60 | - | - | 2 ~ 40 | 4 ~ 50 | - | - | - | 30 ~ 140 | 26 ~ 92 | 23 ~ 92 | 29 ~ 70 | - | - | 20 ~ 92 | - | 29 ~ 70 | 17 ~ 50 | 20 ~ 85 | - | 2.5 ~ 52 | - | - | - | - | - | - | - | 18 ~ 73 | 22 ~ 78 | 26 ~ 92 | 30 ~ 112 | 14 ~ 74 | 18 ~ 72 |
Shank diameter (d)(mm) | 3 ~ 12 | 3 ~ 20 | 4 ~ 20 | 6 ~ 12 | 3 ~ 20 | 6 ~ 12 | 4 ~ 12 | 4 ~ 6 | 4 ~ 25 | 6 ~ 12 | 4 ~ 12 | 4 ~ 6 | 6 ~ 16 | 4 ~ 12 | 4 ~ 6 | 4 ~ 6 | 4 ~ 20 | 4 ~ 12 | 4 ~ 20 | 6 ~ 20 | 6 ~ 20 | 4 ~ 20 | 4 ~ 12 | 6 ~ 12 | 6 ~ 20 | 6 ~ 20 | 4 ~ 12 | 6 ~ 12 | 4 ~ 12 | 4 ~ 12 | 3 ~ 16 | 3 ~ 6 | 4 ~ 12 | 6 ~ 20 | 6 ~ 20 | 4 ~ 20 | 4 ~ 20 | 4 ~ 20 | 6 ~ 12 | 4 ~ 20 | 6 ~ 16 | 6 ~ 20 | 6 ~ 20 | 6 ~ 16 | 4 ~ 20 |
Number of flutes(sheet) | 2 | 2 | 4 | 3 ~ 4 | 2 | 4 ~ 6 | 4 | 2 | 4 | 3 | 4 | 2 | 3 | 2 | 2 | 4 | 2 | 3 | 4 | 3 | 4 | 4 | 4 | 4 ~ 6 | 3 ~ 4 | 3 ~ 4 | 2 | 2 | 3 | 4 | 2 | 2 | 4 | 2 | 4 | 4 | 2 | 4 | 4 | 3 | 3 | 3 | 3 | 4 | 4 |
Overall Length (L)(mm) | 40 ~ 85 | 40 ~ 110 | 40 ~ 110 | 50 ~ 80 | 40 ~ 110 | 60 ~ 100 | 40 ~ 80 | 50 ~ 100 | 60 ~ 250 | 60 ~ 100 | 45 ~ 100 | 40 ~ 100 | 60 ~ 105 | 50 ~ 90 | 50 ~ 100 | 50 ~ 100 | 40 ~ 100 | 45 ~ 100 | 45 ~ 125 | 80 ~ 200 | 60 ~ 130 | 45 ~ 130 | 45 ~ 100 | 60 ~ 100 | 57 ~ 104 | 60 ~ 130 | 40 ~ 80 | 60 ~ 100 | 40 ~ 80 | 75 ~ 200 | 45 ~ 110 | 50 ~ 80 | 45 ~ 100 | 60 ~ 200 | 50 ~ 100 | 45 ~ 130 | 40 ~ 105 | 40 ~ 105 | 50 ~ 90 | 60 ~ 110 | 60 ~ 110 | 60 ~ 130 | 60 ~ 150 | 60 ~ 110 | 60 ~ 110 |
work material | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○] | Aluminum[○] / Copper[◎] / Resin[○] | Aluminum[○] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎] | Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] |
Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | - | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | - | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) / Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | - | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Weak torsion (15 to 25˚) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | - | - | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) |
Machining Application | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts |
Coating | Non-Coated | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | - | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | Non-Coated | For General Steels (AlCrN, etc.) | - | For High Hardness (Silicon Group) | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | CrN | CrN | For General Steels (AlCrN, etc.) | - | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiAlN | For High Hardness (Silicon Group) | Dia Coat | DLC | DLC | Dia Coat | Non-Coated | Non-Coated | For General Steels (AlCrN, etc.) | - | - | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) |
Blade tip shape | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | - | Sharp Edge / With Lead | Sharp Edge | Sharp Edge | Sharp Edge / With Lead | - | With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | C plane | Sharp Edge | Sharp Edge | Sharp Edge / With Lead | - | With Lead | With Lead | With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge | C plane | C plane | Sharp Edge | Sharp Edge | With Lead | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge / With Lead | - | - | Sharp Edge / With Lead | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | With Lead | With Lead | Sharp Edge / With Lead |
Type | Square | Square | Square | Roughing | Square | High Helical | Square | Long-Neck Square | Square | Square | Square | Long-Neck Square | Square | Square | Square | Long-Neck Square | Square | Square | Square | Square | Square | Square | Square | High Helical | Roughing | Roughing | Square | Square | Square | Square | Square | Long-Neck Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
Loading...
How can we improve?
How can we improve?
Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy
Thank you for your cooperation.
Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.
Privacy Policy