METROL Contact Switches（Repeatability：0.01mm or Less）

• You can add up to 6 items per a category to the compare list. Compare

  

  Stop Mini STM with Switch

  METROL

  [Features]
  A mini switch of ø8×8 mm, that is small in size, having quench stopper.
  · Suitable for confined spaces
  · Miniaturization of equipment and appliance which is cost-effective
  · For straight and deflected angle
  · The movable part will move frictionless on the flat spring and hence galling of the movable parts does not occur.
  · The waterproof type (IP67) is not only for the movable part, but the surface of the stopper and the interior of the rubber boot is also dust proof.
  · The standard size of the mounted parts is so accurate that replacement is very easy.

  CAD ：

  2D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt / Standard / Flanged	Pin Stroke Type / Ball Stroke Type / Anglular Misalignment Tolerant Type / Stopper Type	0.3 ～ 0.5	Contact Point Normally Open	0.01mm or Less	Stainless Steel	Stainless Steel	Drip-Proof / Waterproof	8 ～ 11.5	M10 x 1.5 (Coarse) / M10 x 0.75 (Fine)	0.15 ～ 0.25	~ Ø2 / ~ Ø4

  From: ₹ 2,220.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stopper Bolt ST With Switch

  METROL

  [Features]
  1 unit dual roles. The stopper bolt has an in-built positioning switch.
  · Reduction in the number of parts and design man-hour. Ensures miniaturization of the machinery
  · Since the parts of th switch are cartridge type, the maintenance cost can be reduced drastically.
  · Anybody can replace the switch easily.
  · Eliminates the need for repairs.
  · No damage is caused to the switch even if the chord gets twisted or pulled while fixing the switch into the machine and the operation can be performed easily.
  · Improves the efficiency of the machine MTTR and the time required for "repairs" (for example: short-period stop) also reduces drastically.

  CAD ：

  2D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt / Hex Head	Pin Stroke Type / Stopper Type	0.7	Contact Point Normally Open / Contact Point Normally Closed	0.01mm or Less	Stainless Steel	Stainless Steel	Standard / Waterproof	-	M6 x 1.0 (Coarse) / M8 x 1.25 (Coarse) / M10 x 1.5 (Coarse)	0.3	-

  From: ₹ 2,543.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spring Plunger with Switch SP

  METROL

  [Features]
  1 unit dual roles. The spring plunger has an in-built positioning switch.
  · Reduction in the number of parts and design man-hour. Ensures miniaturization of the machinery.
  · Since it is specifically meant to confirm the spring action, it moves substantially until the start of the operation.
  Since there is substantial movement after the operation "Escape," setting the signal is easy and there is no fear of damage even when force is applied while pushing.

  CAD ：

  2D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Pin Stroke Type	3	Contact Point Normally Open	0.01mm or Less	Stainless Steel	Stainless Steel	Standard	-	M6 x 1.0 (Coarse) / M8 x 1.25 (Coarse)	0.8	~ Ø4

  From: ₹ 2,996.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Plunger with SwitchBP

  METROL

  [Features]
  · 1 unit dual roles. The ball plunger has an in- built touch switch.
  · Index for rotating body, indexing using the notch of the sliding conductor. The positioning function and confirmation signal are given as output.
  · Reduction in the number of parts and design man-hour. Ensures miniaturization of the machinery.

  CAD ：

  2D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Ball Stroke Type	0.8	Contact Point Normally Open	0.01mm or Less	Stainless Steel	Stainless Steel	Standard	-	M6 x 1.0 (Coarse)	0.5	~ Ø4

  From: ₹ 2,765.55
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Low Contact Switch

  METROL

  [Features]
  A low contact force of 0.1N.

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt / Standard	Pin Stroke Type	2	Contact Point Normally Open	0.01mm or Less	Stainless Steel	Stainless Steel	Standard	10	M10 x 0.5 (Fine)	0.4	~ Ø2

  From: ₹ 2,936.58
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Heat Resistant Switch HT Series

  METROL

  [Features]
  The maximum temperature for continuous operation lies at 150°C/200°C
  Plastic parts that are heat-resistant, adhesives for high temperature and heat-resistant chord have been used.

  CAD ：

  2D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Pin Stroke Type / Ball Stroke Type / Anglular Misalignment Tolerant Type / Stopper Type	0.3 ～ 2.8	Contact Point Normally Open	0.01mm or Less	Stainless Steel	Stainless Steel	Heat Resistant	-	M6 x 1.0 (Coarse) / M6 x 0.75 (Fine) / M10 x 0.75 (Fine)	0.15 ～ 0.5	~ Ø2 / ~ Ø4

  From: ₹ 12,663.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Contact Section Type
Main Body Shape
Type
Contact Stroke S(mm)
Contact Point Type
Repeatability
Body Material
Contact Material
Environment
Cylinder Outer Dia. D(mm)
Mounting Screw Nominal M
Switch Operating Point P(mm)
Contact Section O.D.

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	METROL	METROL	METROL	METROL	METROL	METROL
Product Series	Stop Mini STM with Switch	Stopper Bolt ST With Switch	Spring Plunger with Switch SP	Ball Plunger with SwitchBP	Low Contact Switch	Heat Resistant Switch HT Series
CAD	2D	2D	2D	2D		2D
From	₹ 2,220.53-	₹ 2,543.76-	₹ 2,996.31-	₹ 2,765.55-	₹ 2,936.58-	₹ 12,663.25-
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	Same day or more	5 Day(s) or more	5 Day(s) or more
Contact Section Type	Needle	Needle	Needle	Needle	Needle	Needle
Main Body Shape	Bolt / Standard / Flanged	Bolt / Hex Head	Bolt	Bolt	Bolt / Standard	Bolt
Type	Pin Stroke Type / Ball Stroke Type / Anglular Misalignment Tolerant Type / Stopper Type	Pin Stroke Type / Stopper Type	Pin Stroke Type	Ball Stroke Type	Pin Stroke Type	Pin Stroke Type / Ball Stroke Type / Anglular Misalignment Tolerant Type / Stopper Type
Contact Stroke S(mm)	0.3 ～ 0.5	0.7	3	0.8	2	0.3 ～ 2.8
Contact Point Type	Contact Point Normally Open	Contact Point Normally Open / Contact Point Normally Closed	Contact Point Normally Open	Contact Point Normally Open	Contact Point Normally Open	Contact Point Normally Open
Repeatability	0.01mm or Less	0.01mm or Less	0.01mm or Less	0.01mm or Less	0.01mm or Less	0.01mm or Less
Body Material	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
Contact Material	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
Environment	Drip-Proof / Waterproof	Standard / Waterproof	Standard	Standard	Standard	Heat Resistant
Cylinder Outer Dia. D(mm)	8 ～ 11.5	-	-	-	10	-
Mounting Screw Nominal M	M10 x 1.5 (Coarse) / M10 x 0.75 (Fine)	M6 x 1.0 (Coarse) / M8 x 1.25 (Coarse) / M10 x 1.5 (Coarse)	M6 x 1.0 (Coarse) / M8 x 1.25 (Coarse)	M6 x 1.0 (Coarse)	M10 x 0.5 (Fine)	M6 x 1.0 (Coarse) / M6 x 0.75 (Fine) / M10 x 0.75 (Fine)
Switch Operating Point P(mm)	0.15 ～ 0.25	0.3	0.8	0.5	0.4	0.15 ～ 0.5
Contact Section O.D.	~ Ø2 / ~ Ø4	-	~ Ø4	~ Ø4	~ Ø2	~ Ø2 / ~ Ø4

Loading...