METROL Contact Switches（Main Body Shape：Bolt）

• You can add up to 6 items per a category to the compare list. Compare

  

  CS-Touch Switch CS/CSJ/CSS/CSK/CSP

  METROL

  [Features]
  · Parallel use slim design with abundant variation
  · M5 to /long stroke waterproof

  CAD ：

  2D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Flat / Needle	Bolt	Pin Stroke Type	2 ～ 5	Contact Point Normally Open / Contact Point Normally Closed	5µm or Less	Stainless Steel	Stainless Steel / Polyacetal	Standard / Waterproof	-	M5 x 0.5 (Fine) / M6 x 0.75 (Fine) / M6 x 0.5 (Fine) / M8 x 0.75 (Fine)	0.3	~ Ø2 / ~ Ø4

  From: ₹ 3,288.82
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CS-Touch Switch for Deflection CSH

  METROL

  [Features]
  A linear bushing is used for the bearing· and it is applicable to sliding, deflection and off-set

  CAD ：

  2D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Spherical	Bolt	Pin Stroke Type / Anglular Misalignment Tolerant Type	2.8	Contact Point Normally Open / Contact Point Normally Closed	5µm or Less	Stainless Steel	Stainless Steel	Standard	-	M12 x 1.0 (Fine)	0.3	~ Ø10

  From: ₹ 5,585.62
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High-Precision MT-Touch Switch P08/P10/P12

  METROL

  The discretion at the operating point is lesser and it can sustain even adverse environment. (IP67)
  
  [Features]
  · the discretion at the operating point is lesser.
  · The accuracy of repetition is 0.5 μm (range)
  · Judgment errors due to incorrect signal and short-period stop gets minimized
  · Can even be used in harsh conditions.
  · An IP67 highly waterproof construction.
  · No differential response
  · Detection of minute displacement can be done continuously.
  · The signal does not drift due to power supply voltage or self‐heating
  · The switch is unaffected by low current and low voltage, however using it within rated range will ensure long life. (3 million times).

  CAD ：

  2D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Flat / Needle	Bolt	Pin Stroke Type / Ball Stroke Type	3 ～ 10	Contact Point Normally Open / Contact Point Normally Closed	1µm or Less	Stainless Steel	Carbide	Waterproof	-	M10 x 0.5 (Fine) / M8 x 0.5 (Fine)	0 ～ 0.2	~ Ø2 / ~ Ø4

  From: ₹ 8,363.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stop Mini STM with Switch

  METROL

  [Features]
  A mini switch of ø8×8 mm, that is small in size, having quench stopper.
  · Suitable for confined spaces
  · Miniaturization of equipment and appliance which is cost-effective
  · For straight and deflected angle
  · The movable part will move frictionless on the flat spring and hence galling of the movable parts does not occur.
  · The waterproof type (IP67) is not only for the movable part, but the surface of the stopper and the interior of the rubber boot is also dust proof.
  · The standard size of the mounted parts is so accurate that replacement is very easy.

  CAD ：

  2D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Pin Stroke Type / Ball Stroke Type / Anglular Misalignment Tolerant Type / Stopper Type	0.3 ～ 0.5	Contact Point Normally Open	0.01mm or Less	Stainless Steel	Stainless Steel	Drip-Proof / Waterproof	-	M10 x 1.5 (Coarse) / M10 x 0.75 (Fine)	0.15 ～ 0.25	~ Ø2 / ~ Ø4

  From: ₹ 2,408.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stopper Bolt ST With Switch

  METROL

  [Features]
  1 unit dual roles. The stopper bolt has an in-built positioning switch.
  · Reduction in the number of parts and design man-hour. Ensures miniaturization of the machinery
  · Since the parts of th switch are cartridge type, the maintenance cost can be reduced drastically.
  · Anybody can replace the switch easily.
  · Eliminates the need for repairs.
  · No damage is caused to the switch even if the chord gets twisted or pulled while fixing the switch into the machine and the operation can be performed easily.
  · Improves the efficiency of the machine MTTR and the time required for "repairs" (for example: short-period stop) also reduces drastically.

  CAD ：

  2D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Pin Stroke Type / Stopper Type	0.7	Contact Point Normally Open / Contact Point Normally Closed	0.01mm or Less	Stainless Steel	Stainless Steel	Standard / Waterproof	-	M6 x 1.0 (Coarse) / M8 x 1.25 (Coarse) / M10 x 1.5 (Coarse)	0.3	-

  From: ₹ 2,543.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Spring Plunger with Switch SP

  METROL

  [Features]
  1 unit dual roles. The spring plunger has an in-built positioning switch.
  · Reduction in the number of parts and design man-hour. Ensures miniaturization of the machinery.
  · Since it is specifically meant to confirm the spring action, it moves substantially until the start of the operation.
  Since there is substantial movement after the operation "Escape," setting the signal is easy and there is no fear of damage even when force is applied while pushing.

  CAD ：

  2D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Pin Stroke Type	3	Contact Point Normally Open	0.01mm or Less	Stainless Steel	Stainless Steel	Standard	-	M6 x 1.0 (Coarse) / M8 x 1.25 (Coarse)	0.8	~ Ø4

  From: ₹ 2,996.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ultra Small Size High-Precision PT-Touch Switch PT

  METROL

  [Features]
  M5 or ø5, smallest size is 17 mm
  · The accuracy of repetition of the operating point can be between 1μm/3μm (range)

  CAD ：

  2D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Pin Stroke Type	1.5	Contact Point Normally Open / Contact Point Normally Closed	3µm or Less / 1µm or Less	Stainless Steel	Stainless Steel	Standard / Waterproof	-	M5 x 0.5 (Fine)	0 ～ 0.3	~ Ø2

  From: ₹ 5,428.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Plunger BP With Ultra Compact Switch

  METROL

  [Features]
  · A ultra small type of ø4 is also provided.
  · World's smallest. Ball plunger switch

  CAD ：

  2D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Ball Stroke Type	1	-	-	Stainless Steel	Carbide	-	-	M5 x 0.5 (Fine)	0.3	~ Ø4

  From: ₹ 4,786.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CS-Touch Switch CSM

  METROL

  [Features]
  · Rectangular
  · Can be fitted in confined spaces or small equipment
  · Long strokes (1.5 mm).
  · Contradictory to the switch with attached stopper mini STM, the stroke end does not have a stopper function.

  CAD ：

  2D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Pin Stroke Type	1.5	Contact Point Normally Open	3µm or Less	Stainless Steel	Stainless Steel	Standard / Waterproof	-	M10 x 0.5 (Fine)	0.3	~ Ø2 / ~ Ø4

  From: ₹ 3,675.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball Plunger with SwitchBP

  METROL

  [Features]
  · 1 unit dual roles. The ball plunger has an in- built touch switch.
  · Index for rotating body, indexing using the notch of the sliding conductor. The positioning function and confirmation signal are given as output.
  · Reduction in the number of parts and design man-hour. Ensures miniaturization of the machinery.

  CAD ：

  2D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Ball Stroke Type	0.8	Contact Point Normally Open	0.01mm or Less	Stainless Steel	Stainless Steel	Standard	-	M6 x 1.0 (Coarse)	0.5	~ Ø4

  From: ₹ 2,765.55
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High-Precision, MT-Touch Switch, P10DH

  METROL

  [Features]
  A direct acting type ball bearing is used in the bearing which is applicable for sliding, deflection and off-set.

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Pin Stroke Type	3 ～ 10	Contact Point Normally Open / Contact Point Normally Closed	1µm or Less	Stainless Steel	Carbide	Waterproof	14	M14 x 0.5 (Fine)	0 ～ 0.2	~ Ø2

  From: ₹ 17,548.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Low Contact Switch

  METROL

  [Features]
  A low contact force of 0.1N.

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Pin Stroke Type	2	Contact Point Normally Open	0.01mm or Less	Stainless Steel	Stainless Steel	Standard	-	M10 x 0.5 (Fine)	0.4	~ Ø2

  From: ₹ 3,179.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Heat Resistant Switch HT Series

  METROL

  [Features]
  The maximum temperature for continuous operation lies at 150°C/200°C
  Plastic parts that are heat-resistant, adhesives for high temperature and heat-resistant chord have been used.

  CAD ：

  2D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Pin Stroke Type / Ball Stroke Type / Anglular Misalignment Tolerant Type / Stopper Type	0.3 ～ 2.8	Contact Point Normally Open	0.01mm or Less	Stainless Steel	Stainless Steel	Heat Resistant	-	M6 x 1.0 (Coarse) / M6 x 0.75 (Fine) / M10 x 0.75 (Fine)	0.15 ～ 0.5	~ Ø2 / ~ Ø4

  From: ₹ 12,663.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  The Switch Can Also Sustain a High Degree of Vacuum Pressure

  METROL

  [Features]
  · Can sustain high degree of vacuum 10^-5Pa.

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Pin Stroke Type	1.5	Contact Point Normally Open / Contact Point Normally Closed	3µm or Less	Stainless Steel	Stainless Steel	Vacuum	-	M5 x 0.5 (Fine)	0 ～ 0.3	~ Ø2

  From: ₹ 19,567.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CS-Touch Switch for Declination Waterproof Type CSHP

  METROL

  [Features]
  · M8 ultra-fine. Positioning at the deflected angle with waterproof specifications.

  CAD ：

  2D

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Pin Stroke Type / Anglular Misalignment Tolerant Type	2.8	Contact Point Normally Open / Contact Point Normally Closed	5µm or Less	Stainless Steel	Stainless Steel	Waterproof	-	M8 x 0.5 (Fine)	0.3	-

  From: ₹ 9,857.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High-precision, MT-Touch Switch, P10MC

  METROL

  [Features]
  The rotation of the contact ball helps in detecting the sliding body.
  · The absence of differential response can determine the slight existence or non-existence which is useful for determining the thickness of the sheet.

  Contact Section Type	Main Body Shape	Type	Contact Stroke S(mm)	Contact Point Type	Repeatability	Body Material	Contact Material	Environment	Cylinder Outer Dia. D(mm)	Mounting Screw Nominal M	Switch Operating Point P(mm)	Contact Section O.D.
  Needle	Bolt	Ball Stroke Type	1.2	Contact Point Normally Open / Contact Point Normally Closed	3µm or Less	Stainless Steel	Carbide	Standard	-	M10 x 0.5 (Fine)	0 ～ 0.2	~ Ø6

  From: ₹ 8,057.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Contact Section Type
Main Body Shape
Type
Contact Stroke S(mm)
Contact Point Type
Repeatability
Body Material
Contact Material
Environment
Cylinder Outer Dia. D(mm)
Mounting Screw Nominal M
Switch Operating Point P(mm)
Contact Section O.D.

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	METROL	METROL	METROL	METROL	METROL	METROL	METROL	METROL	METROL	METROL	METROL	METROL	METROL	METROL	METROL	METROL
Product Series	CS-Touch Switch CS/CSJ/CSS/CSK/CSP	CS-Touch Switch for Deflection CSH	High-Precision MT-Touch Switch P08/P10/P12	Stop Mini STM with Switch	Stopper Bolt ST With Switch	Spring Plunger with Switch SP	Ultra Small Size High-Precision PT-Touch Switch PT	Ball Plunger BP With Ultra Compact Switch	CS-Touch Switch CSM	Ball Plunger with SwitchBP	High-Precision, MT-Touch Switch, P10DH	Low Contact Switch	Heat Resistant Switch HT Series	The Switch Can Also Sustain a High Degree of Vacuum Pressure	CS-Touch Switch for Declination Waterproof Type CSHP	High-precision, MT-Touch Switch, P10MC
CAD	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D			2D		2D
From	₹ 3,288.82-	₹ 5,585.62-	₹ 8,363.53-	₹ 2,408.04-	₹ 2,543.76-	₹ 2,996.31-	₹ 5,428.36-	₹ 4,786.80	₹ 3,675.93-	₹ 2,765.55-	₹ 17,548.04-	₹ 3,179.02	₹ 12,663.25-	₹ 19,567.84-	₹ 9,857.04-	₹ 8,057.09-
Days to Ship	Same day or more	Same day or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	Same day or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Contact Section Type	Flat / Needle	Spherical	Flat / Needle	Needle	Needle	Needle	Needle	Needle	Needle	Needle	Needle	Needle	Needle	Needle	Needle	Needle
Main Body Shape	Bolt	Bolt	Bolt	Bolt	Bolt	Bolt	Bolt	Bolt	Bolt	Bolt	Bolt	Bolt	Bolt	Bolt	Bolt	Bolt
Type	Pin Stroke Type	Pin Stroke Type / Anglular Misalignment Tolerant Type	Pin Stroke Type / Ball Stroke Type	Pin Stroke Type / Ball Stroke Type / Anglular Misalignment Tolerant Type / Stopper Type	Pin Stroke Type / Stopper Type	Pin Stroke Type	Pin Stroke Type	Ball Stroke Type	Pin Stroke Type	Ball Stroke Type	Pin Stroke Type	Pin Stroke Type	Pin Stroke Type / Ball Stroke Type / Anglular Misalignment Tolerant Type / Stopper Type	Pin Stroke Type	Pin Stroke Type / Anglular Misalignment Tolerant Type	Ball Stroke Type
Contact Stroke S(mm)	2 ～ 5	2.8	3 ～ 10	0.3 ～ 0.5	0.7	3	1.5	1	1.5	0.8	3 ～ 10	2	0.3 ～ 2.8	1.5	2.8	1.2
Contact Point Type	Contact Point Normally Open / Contact Point Normally Closed	Contact Point Normally Open / Contact Point Normally Closed	Contact Point Normally Open / Contact Point Normally Closed	Contact Point Normally Open	Contact Point Normally Open / Contact Point Normally Closed	Contact Point Normally Open	Contact Point Normally Open / Contact Point Normally Closed	-	Contact Point Normally Open	Contact Point Normally Open	Contact Point Normally Open / Contact Point Normally Closed	Contact Point Normally Open	Contact Point Normally Open	Contact Point Normally Open / Contact Point Normally Closed	Contact Point Normally Open / Contact Point Normally Closed	Contact Point Normally Open / Contact Point Normally Closed
Repeatability	5µm or Less	5µm or Less	1µm or Less	0.01mm or Less	0.01mm or Less	0.01mm or Less	3µm or Less / 1µm or Less	-	3µm or Less	0.01mm or Less	1µm or Less	0.01mm or Less	0.01mm or Less	3µm or Less	5µm or Less	3µm or Less
Body Material	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
Contact Material	Stainless Steel / Polyacetal	Stainless Steel	Carbide	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Carbide	Stainless Steel	Stainless Steel	Carbide	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Carbide
Environment	Standard / Waterproof	Standard	Waterproof	Drip-Proof / Waterproof	Standard / Waterproof	Standard	Standard / Waterproof	-	Standard / Waterproof	Standard	Waterproof	Standard	Heat Resistant	Vacuum	Waterproof	Standard
Cylinder Outer Dia. D(mm)	-	-	-	-	-	-	-	-	-	-	14	-	-	-	-	-
Mounting Screw Nominal M	M5 x 0.5 (Fine) / M6 x 0.75 (Fine) / M6 x 0.5 (Fine) / M8 x 0.75 (Fine)	M12 x 1.0 (Fine)	M10 x 0.5 (Fine) / M8 x 0.5 (Fine)	M10 x 1.5 (Coarse) / M10 x 0.75 (Fine)	M6 x 1.0 (Coarse) / M8 x 1.25 (Coarse) / M10 x 1.5 (Coarse)	M6 x 1.0 (Coarse) / M8 x 1.25 (Coarse)	M5 x 0.5 (Fine)	M5 x 0.5 (Fine)	M10 x 0.5 (Fine)	M6 x 1.0 (Coarse)	M14 x 0.5 (Fine)	M10 x 0.5 (Fine)	M6 x 1.0 (Coarse) / M6 x 0.75 (Fine) / M10 x 0.75 (Fine)	M5 x 0.5 (Fine)	M8 x 0.5 (Fine)	M10 x 0.5 (Fine)
Switch Operating Point P(mm)	0.3	0.3	0 ～ 0.2	0.15 ～ 0.25	0.3	0.8	0 ～ 0.3	0.3	0.3	0.5	0 ～ 0.2	0.4	0.15 ～ 0.5	0 ～ 0.3	0.3	0 ～ 0.2
Contact Section O.D.	~ Ø2 / ~ Ø4	~ Ø10	~ Ø2 / ~ Ø4	~ Ø2 / ~ Ø4	-	~ Ø4	~ Ø2	~ Ø4	~ Ø2 / ~ Ø4	~ Ø4	~ Ø2	~ Ø2	~ Ø2 / ~ Ø4	~ Ø2	-	~ Ø6

Loading...