KYOWA Oil Gauges（Nominal Designation of Elongated Screw Thread：M10）

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Oil Gauge, General Use, Acrylic, KLA-A・KLA-B

  KYOWA

  [Features]
  ・ KLA type is a simple oil gauge that uses heat-resistant improved methacrylic resin for the main body. Besides, it looks very deluxe in external appearance
  ・ The transparency of the main body is very good, and the white printing on the back side and the built-in float make it possible to reliably read the oil surface
  ・ KLA type is a general oil gauge, not for heat resistance, chemical resistance, or pressure resistance

  Type	Circular Type	Elongated Type	Additional Functions for Level Visibility	Other Added Functions	External Diameter of Circular Mounting Part(φ)	Circular Type, Mounting Hole Pitch(mm)	Nominal Designation of Circular Screw Thread	Nominal Designation of Elongated Screw Thread	Body Material	Maximum Operating Temperature(℃)
  Elongated Type	-	Standard	Not Provided / Line / Float	-	-	-	-	M10	Plastic	90

  From: ₹ 1,607.20
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Oil Gauge for Standard Pipes, KLPC-N, without Indicating Line

  KYOWA

  [Features]
  ・ The KLPC-N type oil gauge is a series with no vertical red line printed on the KLPC type liquid level gauge
  ・ The main body is made of heat-resistant reinforced resin and the operating temperature is 100°C
  ・ Since the liquid level gauge is sealed and connected only by the O-ring, it can cover some deviations in the mounting pitch
  ・ Fewer parts, easy to install and replace
  ・ The mounting length can be freely changed by changing the length of the pipe
  ・ You can put multiple indicator lines on the pipe
  ・ The standard pipe is made of polycarbonate resin, but it can be made of acrylic resin, PSF resin, etc., according to the application
  ・ Large see-through angle allows you to see the oil level even from the side
  ・ You can easily clean the dirt inside by simply removing the gauge
  ・ Black is standard for floats, but red is also available
  ・ Pressure resistance is 0.3 MPa

  Type	Circular Type	Elongated Type	Additional Functions for Level Visibility	Other Added Functions	External Diameter of Circular Mounting Part(φ)	Circular Type, Mounting Hole Pitch(mm)	Nominal Designation of Circular Screw Thread	Nominal Designation of Elongated Screw Thread	Body Material	Maximum Operating Temperature(℃)
  Elongated Type	-	Pipe Type	Float	Not Provided	-	-	-	M10	Plastic	90

  From: ₹ 2,400.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Oil Gauge - General Purpose Nylon Made - KLA-SN

  KYOWA

  [Features]
  ・ The KLA-SN type is an oil gauge for molded products that uses a transparent polyamide resin for the main body
  ・ It has the same function as KLA-A type (acrylic resin product), and it is cheap in terms of cost
  ・ The transparency of the body is good, and the white printing on the back and the built-in float ensure that the oil surface can be read

  Type	Circular Type	Elongated Type	Additional Functions for Level Visibility	Other Added Functions	External Diameter of Circular Mounting Part(φ)	Circular Type, Mounting Hole Pitch(mm)	Nominal Designation of Circular Screw Thread	Nominal Designation of Elongated Screw Thread	Body Material	Maximum Operating Temperature(℃)
  Elongated Type	-	Standard	Line / Float	Comes with Temperature Meter	-	-	-	M10	Plastic	90

  From: ₹ 1,831.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Oil Gauge for Standard Pipes, L, KLL

  KYOWA

  The body of the oil gauge itself, like the KLP type, acts as a seal.
  [Features]
  ・ Sealed automatically without sealing
  ・ There are few parts, and anyone can easily install and replace them
  ・ Large see-through angle allows you to see the oil level even from the side
  ・ You can also clean the inside dirt just by removing the bolts
  ・ The guide holding the tip of the cage can be installed by making a hole in 1 place
  ・ Air can be circulated in the cage just by attaching the cap on the tip
  ・ The mounting bolt acts as a stopper. When you tighten it until it stops, it will automatically seal and there will be no oil leakage
  ・ Contains a float

  Type	Circular Type	Elongated Type	Additional Functions for Level Visibility	Other Added Functions	External Diameter of Circular Mounting Part(φ)	Circular Type, Mounting Hole Pitch(mm)	Nominal Designation of Circular Screw Thread	Nominal Designation of Elongated Screw Thread	Body Material	Maximum Operating Temperature(℃)
  Elongated Type	-	Pipe Type	Line / Float	Not Provided	-	-	-	M10	Plastic	90

  From: ₹ 3,591.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Oil Gauge, General-Purpose, KL・KL2

  KYOWA

  [Features]
  ・ KL type oil gauge uses special synthetic resin for mounting bolt and set part
  ・ The oil window part is made of transparent resin that is strong in impact resistance and has little load deformation
  ・ The mounting bolt / set part and the oil window part are joined with a connection bar
  ・ When installing the oil gauge, it can be sealed only by the mounting packing, and the installation is easy
  ・ The KL and KL2 type reflectors have red scales on a white background, and the back side of the oil window is printed in white
  ・ Not only check the amount of oil, but also do not miss the detailed symptoms of oil
  ・ Pressure resistance is 0.5 to 0.8 MPa, heat resistance is 90°C
  ・ The KL2 type is the same as the KL type, except for the indicator lines on the reflector, same as for the pitch and other dimensions

  Type	Circular Type	Elongated Type	Additional Functions for Level Visibility	Other Added Functions	External Diameter of Circular Mounting Part(φ)	Circular Type, Mounting Hole Pitch(mm)	Nominal Designation of Circular Screw Thread	Nominal Designation of Elongated Screw Thread	Body Material	Maximum Operating Temperature(℃)
  Elongated Type	-	Standard	Scale / Line	Not Provided	-	-	-	M10	Plastic	90

  From: ₹ 2,969.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Type
Circular Type
Elongated Type
Additional Functions for Level Visibility
Other Added Functions
External Diameter of Circular Mounting Part(φ)
Circular Type, Mounting Hole Pitch(mm)
Nominal Designation of Circular Screw Thread
Nominal Designation of Elongated Screw Thread
Body Material
Maximum Operating Temperature(℃)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	KYOWA	KYOWA	KYOWA	KYOWA	KYOWA
Product Series	Long Oil Gauge, General Use, Acrylic, KLA-A・KLA-B	Long Oil Gauge for Standard Pipes, KLPC-N, without Indicating Line	Long Oil Gauge - General Purpose Nylon Made - KLA-SN	Long Oil Gauge for Standard Pipes, L, KLL	Long Oil Gauge, General-Purpose, KL・KL2
From	₹ 1,607.20-	₹ 2,400.00-	₹ 1,831.20-	₹ 3,591.20	₹ 2,969.82-
Days to Ship	Same day or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Type	Elongated Type	Elongated Type	Elongated Type	Elongated Type	Elongated Type
Circular Type	-	-	-	-	-
Elongated Type	Standard	Pipe Type	Standard	Pipe Type	Standard
Additional Functions for Level Visibility	Not Provided / Line / Float	Float	Line / Float	Line / Float	Scale / Line
Other Added Functions	-	Not Provided	Comes with Temperature Meter	Not Provided	Not Provided
External Diameter of Circular Mounting Part(φ)	-	-	-	-	-
Circular Type, Mounting Hole Pitch(mm)	-	-	-	-	-
Nominal Designation of Circular Screw Thread	-	-	-	-	-
Nominal Designation of Elongated Screw Thread	M10	M10	M10	M10	M10
Body Material	Plastic	Plastic	Plastic	Plastic	Plastic
Maximum Operating Temperature(℃)	90	90	90	90	90

Loading...