• You can add up to 6 items per a category to the compare list. Compare

  

  Long Oil Gauge, General-Purpose, KL・KL2

  KYOWA

  [Features]
  ・ KL type oil gauge uses special synthetic resin for mounting bolt and set part
  ・ The oil window part is made of transparent resin that is strong in impact resistance and has little load deformation
  ・ The mounting bolt / set part and the oil window part are joined with a connection bar
  ・ When installing the oil gauge, it can be sealed only by the mounting packing, and the installation is easy
  ・ The KL and KL2 type reflectors have red scales on a white background, and the back side of the oil window is printed in white
  ・ Not only check the amount of oil, but also do not miss the detailed symptoms of oil
  ・ Pressure resistance is 0.5 to 0.8 MPa, heat resistance is 90°C
  ・ The KL2 type is the same as the KL type, except for the indicator lines on the reflector, same as for the pitch and other dimensions

  Type	Circular Type	Elongated Type	Additional Functions for Level Visibility	Other Added Functions	External Diameter of Circular Mounting Part(φ)	Circular Type, Mounting Hole Pitch(mm)	Nominal Designation of Circular Screw Thread	Nominal Designation of Elongated Screw Thread	Body Material	Maximum Operating Temperature(℃)
  Elongated Type	-	Standard	Line	Not Provided	-	-	-	M8 ～ M10	Plastic	90

  From: ₹ 2,855.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Round Oil Gauge for General Use, Drive-In (Press-Fit) Type KD・KDM Type

  KYOWA

  [Features]
  ・ The residual oil is automatically guided to the outside of the oil gauge, eliminating the illusion of residual oil and preventing oil shortage
  ・ The reflector set inside the oil gauge is white
  ・ The gauge room is bright and you can check the presence of oil from a distance

  Type	Circular Type	Elongated Type	Additional Functions for Level Visibility	Other Added Functions	External Diameter of Circular Mounting Part(φ)	Circular Type, Mounting Hole Pitch(mm)	Nominal Designation of Circular Screw Thread	Nominal Designation of Elongated Screw Thread	Body Material	Maximum Operating Temperature(℃)
  Round Type	Inset (with Collar)	-	Line	Heat Resistant	20.5 ～ 59	-	-	-	Plastic	90

  From: ₹ 404.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Oil Gauge, General Use, Acrylic, KLA-A・KLA-B

  KYOWA

  [Features]
  ・ KLA type is a simple oil gauge that uses heat-resistant improved methacrylic resin for the main body. Besides, it looks very deluxe in external appearance
  ・ The transparency of the main body is very good, and the white printing on the back side and the built-in float make it possible to reliably read the oil surface
  ・ KLA type is a general oil gauge, not for heat resistance, chemical resistance, or pressure resistance

  Type	Circular Type	Elongated Type	Additional Functions for Level Visibility	Other Added Functions	External Diameter of Circular Mounting Part(φ)	Circular Type, Mounting Hole Pitch(mm)	Nominal Designation of Circular Screw Thread	Nominal Designation of Elongated Screw Thread	Body Material	Maximum Operating Temperature(℃)
  Elongated Type	-	Standard	Line	-	-	-	-	M8 ～ M12	Plastic	90

  From: ₹ 1,531.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Oil Gauge - General Purpose Nylon Made - KLA-SN

  KYOWA

  [Features]
  ・ The KLA-SN type is an oil gauge for molded products that uses a transparent polyamide resin for the main body
  ・ It has the same function as KLA-A type (acrylic resin product), and it is cheap in terms of cost
  ・ The transparency of the body is good, and the white printing on the back and the built-in float ensure that the oil surface can be read

  Type	Circular Type	Elongated Type	Additional Functions for Level Visibility	Other Added Functions	External Diameter of Circular Mounting Part(φ)	Circular Type, Mounting Hole Pitch(mm)	Nominal Designation of Circular Screw Thread	Nominal Designation of Elongated Screw Thread	Body Material	Maximum Operating Temperature(℃)
  Elongated Type	-	Standard	Line	Comes with Temperature Meter	-	-	-	M10	Plastic	90

  From: ₹ 1,831.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Round General Use Oil Gauge, KB and KB-HL Types

  KYOWA

  [Features]
  ・ ＜KB type＞
  ・ This product is all integrated production
  ・ The rubber wrapping around the oil gauge is made of urethane and is made by an automatic machine with a double molding method
  ・ Regarding the internal structure, like the KC and KD types, the oil induction part K acts
  ・ The urethane resin has high heat resistance
  ・ As a result, the operating temperature is 90°C
  ＜KB-HL type＞
  ・ The KB-HL type is the same as the KB type except for the reflector, which has the same outside diameter, width, and other dimensions

  Type	Circular Type	Elongated Type	Additional Functions for Level Visibility	Other Added Functions	External Diameter of Circular Mounting Part(φ)	Circular Type, Mounting Hole Pitch(mm)	Nominal Designation of Circular Screw Thread	Nominal Designation of Elongated Screw Thread	Body Material	Maximum Operating Temperature(℃)
  Round Type	Inset (without Collar)	-	Line	Heat Resistant	25.15 ～ 40.2	-	-	-	Plastic	90

  From: ₹ 412.91
  Days to Ship: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Round Oil Gauge, General Purpose, Screw Type, KDS Type

  KYOWA

  [Features]
  ・ Since the mounting bolt itself acts as an oil circulation, it can be easily mounted by processing 2 (or 4) threads on the product body to be used
  ・ KDS type cover can be easily removed
  ・ Even with the oil gauge body attached, you can clean the inside just by removing the cover
  ・ The reflector is printed in red on a white background with H and L lines, so you can check not only the amount of oil but also the minute changes in oil

  Type	Circular Type	Elongated Type	Additional Functions for Level Visibility	Other Added Functions	External Diameter of Circular Mounting Part(φ)	Circular Type, Mounting Hole Pitch(mm)	Nominal Designation of Circular Screw Thread	Nominal Designation of Elongated Screw Thread	Body Material	Maximum Operating Temperature(℃)
  Round Type	Screwing Type	-	Line	Not Provided	-	20 ～ 38	-	-	Plastic	90

  From: ₹ 1,187.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Oil Gauge for Standard Pipes, L, KLL

  KYOWA

  The body of the oil gauge itself, like the KLP type, acts as a seal.
  [Features]
  ・ Sealed automatically without sealing
  ・ There are few parts, and anyone can easily install and replace them
  ・ Large see-through angle allows you to see the oil level even from the side
  ・ You can also clean the inside dirt just by removing the bolts
  ・ The guide holding the tip of the cage can be installed by making a hole in 1 place
  ・ Air can be circulated in the cage just by attaching the cap on the tip
  ・ The mounting bolt acts as a stopper. When you tighten it until it stops, it will automatically seal and there will be no oil leakage
  ・ Contains a float

  Type	Circular Type	Elongated Type	Additional Functions for Level Visibility	Other Added Functions	External Diameter of Circular Mounting Part(φ)	Circular Type, Mounting Hole Pitch(mm)	Nominal Designation of Circular Screw Thread	Nominal Designation of Elongated Screw Thread	Body Material	Maximum Operating Temperature(℃)
  Elongated Type	-	Pipe Type	Line	Not Provided	-	-	-	M10	Plastic	90

  From: ₹ 3,591.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  General Purpose Round Oil Gauge KF Type (Flange Type)

  KYOWA

  [Features]
  ・ Parts of the conventional oil gauge tightened with bolts were disjointed, but each part was collected and finished compactly
  ・ Easy to install with only 4 bolts, and after installation it makes the machine very deluxe

  Type	Circular Type	Elongated Type	Additional Functions for Level Visibility	Other Added Functions	External Diameter of Circular Mounting Part(φ)	Circular Type, Mounting Hole Pitch(mm)	Nominal Designation of Circular Screw Thread	Nominal Designation of Elongated Screw Thread	Body Material	Maximum Operating Temperature(℃)
  Round Type	Screwing Type	-	Line	Not Provided	-	-	M5 ～ M6	-	Plastic	90

  From: ₹ 1,718.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Round Oil Gauge with Included Standard Oil Filler Opening

  KYOWA

  [Features]
  ・ Easy to install. Simply remove the lid to top-up the oil. Moreover, since there is a gauge bar inside, you can know the amount of oil accurately
  ・ By turning the lid a little, you can freely open and close the air vent
  ・ Even if the inside is dirty, you can easily clean it
  ・ The body uses heat-resistant transparent resin with excellent oil resistance, heat resistance, and impact resistance

  Type	Circular Type	Elongated Type	Additional Functions for Level Visibility	Other Added Functions	External Diameter of Circular Mounting Part(φ)	Circular Type, Mounting Hole Pitch(mm)	Nominal Designation of Circular Screw Thread	Nominal Designation of Elongated Screw Thread	Body Material	Maximum Operating Temperature(℃)
  Round Type	Screwing Type	-	Line	Heat Resistant / Comes with Lubrication Port	-	45	M6	-	Plastic	90

  From: ₹ 2,258.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Type
Circular Type
Elongated Type
Additional Functions for Level Visibility
Other Added Functions
External Diameter of Circular Mounting Part(φ)
Circular Type, Mounting Hole Pitch(mm)
Nominal Designation of Circular Screw Thread
Nominal Designation of Elongated Screw Thread
Body Material
Maximum Operating Temperature(℃)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	KYOWA	KYOWA	KYOWA	KYOWA	KYOWA	KYOWA	KYOWA	KYOWA	KYOWA
Product Series	Long Oil Gauge, General-Purpose, KL・KL2	Round Oil Gauge for General Use, Drive-In (Press-Fit) Type KD・KDM Type	Long Oil Gauge, General Use, Acrylic, KLA-A・KLA-B	Long Oil Gauge - General Purpose Nylon Made - KLA-SN	Round General Use Oil Gauge, KB and KB-HL Types	Round Oil Gauge, General Purpose, Screw Type, KDS Type	Long Oil Gauge for Standard Pipes, L, KLL	General Purpose Round Oil Gauge KF Type (Flange Type)	Round Oil Gauge with Included Standard Oil Filler Opening
From	₹ 2,855.96-	₹ 404.87-	₹ 1,531.20-	₹ 1,831.20-	₹ 412.91-	₹ 1,187.09-	₹ 3,591.20	₹ 1,718.82-	₹ 2,258.60
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	13 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Type	Elongated Type	Round Type	Elongated Type	Elongated Type	Round Type	Round Type	Elongated Type	Round Type	Round Type
Circular Type	-	Inset (with Collar)	-	-	Inset (without Collar)	Screwing Type	-	Screwing Type	Screwing Type
Elongated Type	Standard	-	Standard	Standard	-	-	Pipe Type	-	-
Additional Functions for Level Visibility	Line	Line	Line	Line	Line	Line	Line	Line	Line
Other Added Functions	Not Provided	Heat Resistant	-	Comes with Temperature Meter	Heat Resistant	Not Provided	Not Provided	Not Provided	Heat Resistant / Comes with Lubrication Port
External Diameter of Circular Mounting Part(φ)	-	20.5 ～ 59	-	-	25.15 ～ 40.2	-	-	-	-
Circular Type, Mounting Hole Pitch(mm)	-	-	-	-	-	20 ～ 38	-	-	45
Nominal Designation of Circular Screw Thread	-	-	-	-	-	-	-	M5 ～ M6	M6
Nominal Designation of Elongated Screw Thread	M8 ～ M10	-	M8 ～ M12	M10	-	-	M10	-	-
Body Material	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic
Maximum Operating Temperature(℃)	90	90	90	90	90	90	90	90	90

Loading...