• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Groove SIGE Type Compatible Chip

  KYOCERA

  B dimension: Indicates machinable groove depth.

  From: ₹ 1,496.98
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chip for Grooving

  KYOCERA

  The edge width tolerance of GB32$050 is different. (0.50 + 0.05 0)

  From: ₹ 1,242.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Shallow Groove Holder KGBA Type

  KYOCERA

  [Features]This is a lever lock type holder that can be used for shallow grooving on outer diameters.

  From: ₹ 10,199.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slit Tip GDM Type

  KYOCERA

  When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.

  From: ₹ 1,188.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning (Cutter) Bit GDM Model

  KYOCERA

  Conventional insert mounting to new holders is not recommended.

  From: ₹ 930.42
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA

  KYOCERA

  [Specifications]·Compatible insert shape: non-ISO standard; clamp method: clamp-on (C); clamp method: clamp-on (C)

  From: ₹ 20,098.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting Holder KGD Model (Combination)

  KYOCERA

  If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.

  From: ₹ 10,478.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole)

  KYOCERA

  [Specifications]·Machining applications: grooving; holder angle (°): 90; lubrication hole (oil hole): yes; screw clamp enables good cutting chip discharge

  From: ₹ 12,350.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooved End Face Blade KGDF Type

  KYOCERA

  [Specifications]·Machining applications: flanges, blind holes; compatible insert shape: non-ISO standard; clamp method: non-ISO standard

  From: ₹ 8,827.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slit Tip (For Small Diameters) TKF Type

  KYOCERA

  [Features]
  · Lead angle (front cutting blade angle: θ) indicates the angle when mounted to the holder.

  From: ₹ 1,819.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning (Cutter) Holder KGD Model (for Combination/Automatic Type)

  KYOCERA

  If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.

  From: ₹ 10,048.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Grooving (Cutting-Off) Chip GMM Type

  KYOCERA

  Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.

  From: ₹ 1,152.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Bore Slotting Holder [for GV Tip]

  KYOCERA

  Right-handed (R) insert and left-handed (L) insert are compatible with right-handed (R) holder and left-handed (L) holder respectively.

  From: ₹ 15,722.69
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting (Multi-Function) Bit GMM Model

  KYOCERA

  Machinable groove depth is limited depending on workpiece diameter.

  From: ₹ 967.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] Compatible Chip

  KYOCERA

  [Features]Carbide materials and Cermet materials are used, and some are coated with CVD and PVD coatings.

  From: ₹ 1,116.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Groove EZG Type (Small Inner Diameter Grooving)

  KYOCERA

  T dimension: Shows the machinable groove depth.

  From: ₹ 2,658.67
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Shallow Groove Holder KIGBA Type

  KYOCERA

  [Specifications]·Machining applications: grooving; holder angle (°): 90; type: integrated

  From: ₹ 18,807.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / End Face Grooving Holder Compatible Tip

  KYOCERA

  Takinor multi-functional / end face grooving holder.

  From: ₹ 1,123.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slit Tip GDMS Type

  KYOCERA

  When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.

  From: ₹ 900.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type

  KYOCERA

  A clamp-on type outer diameter shallow grooving holder.
  [Shank Material]Steel

  From: ₹ 10,199.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Grooving (Cutting-Off) Chip GMG Type

  KYOCERA

  Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.

  From: ₹ 1,546.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving And End Surface Grooving) KGMU Type (Outer Diameter Sliding Groove Holder)

  KYOCERA

  A holder for the multi-function tool "TAKINOL" series.
  For outer diameter relief cut grooving.

  From: ₹ 13,570.29
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Inner Diameter Grooving Holder (KIGM-V Type)

  KYOCERA

  From: ₹ 1,446.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning Bit Compatible Bit

  KYOCERA

  B dimension: Indicates machinable groove depth.

  From: ₹ 1,984.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cutter Holder TKN Type

  KYOCERA

  P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.

  From: ₹ 829.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  KGDS-S Type Blade for Grooving/Plunging

  KYOCERA

  [Specifications]·Machining applications: grooving / parting-off; holder angle (°): 0; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGS

  From: ₹ 6,702.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Bore Slotting System Bar, Model VNG

  KYOCERA

  Solid type system bar.

  From: ₹ 3,354.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Internal Grooving Inserts Compatible Inserts (For GIV Type / GIV-E Type / GIV-W Type)

  KYOCERA

  GIV model tip for small diameter grroving.

  From: ₹ 1,183.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Groove Cutter (Twin Bar) Model S..-STW (Circular Shank for Side Cutting Bit)

  KYOCERA

  · T dimension: Shows the distance from holder surface to cutting edge. The actual possible grooving depth is the insert B dimension.

  From: ₹ 15,793.67
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cutter Holder TKR/L Type

  KYOCERA

  P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.

  From: ₹ 829.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning (Cutter) Bit GDMS Model

  KYOCERA

  Conventional insert mounting to new holders is not recommended.

  From: ₹ 757.64
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting Holder Main Body KGD-S Model (Straight Type: 0°, Parting Type)

  KYOCERA

  [Specifications]·Machining applications: grooving / parting-off; holder angle (°): 0; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGS

  From: ₹ 8,352.16
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type)

  KYOCERA

  If using GMG/GMM type (2-cornered) inserts, set the maximum grooving depth to 15 mm.

  From: ₹ 10,983.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGH Type

  KYOCERA

  [Features]It can be used for shallow grooving on the outer diameter and can be used for GH, GHU and GA inserts.

  From: ₹ 12,350.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  KGDF Type End Face Grooving GDFM/GDFMS Types

  KYOCERA

  Use a DM breaker for deep grooves when cutting chip processing is not stable during grooving with a general purpose GM breaker.

  From: ₹ 735.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooved End Face Blade KFTB-S Type

  KYOCERA

  [Specifications]·Compatible insert shape: non-ISO standard; clamp method: non-ISO standard; clamp method: non-ISO standard

  From: ₹ 16,727.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slit Tip KGD Type (for Automatic Plate)

  KYOCERA

  4.0 mm wide insert can also be mounted on KGDR/L1212JX-3, but this is not recommended due to the lack of holder rigidity.

  From: ₹ 10,048.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Punching Blade KTKB-S Type

  KYOCERA

  P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.

  From: ₹ 10,881.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tool Block for Holding Blade, KTKTB Type (Split Type)

  KYOCERA

  [Features]
  A split tool block for holding a Kyocera's blade.
  [Applications]
  For fixing blades.

  From: ₹ 20,996.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kyocera, Grooving Holder, GFVT Type

  KYOCERA

  A clamp-on holder for face grooving.
  Modular (blade).

  From: ₹ 15,426.57
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooved End Face Holder (for GVF Chip) GFVT Type

  KYOCERA

  [Features]
  · Blade exchange enables this holder to support various groove diameters.

  From: ₹ 20,098.49
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Shallow Groove Holder KGBAS Type

  KYOCERA

  A lever-lock type outer diameter shallow grooving holder.
  [Shank Material]Steel

  From: ₹ 11,058.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type

  KYOCERA

  A clamp-on type outer diameter shallow grooving holder.
  [Shank Material]Steel

  From: ₹ 11,058.93
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning (Cutter) Bit GDG Model

  KYOCERA

  Conventional insert mounting to new holders is not recommended.

  From: ₹ 1,281.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning Holder KGDS-S Model (Right Angle Type: 90°, Parting Type)

  KYOCERA

  If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.

  From: ₹ 14,378.09
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

Brand
Product Series
From
Days to Ship
Application
Groove Width(mm)
Maximum Groove Depth(mm)
Selfishly
Maximum Machining Diameter(mm)
Number of corners for tip use
Shank height(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA
Product Series	Inner Diameter Groove SIGE Type Compatible Chip	Chip for Grooving	Outer Diameter Shallow Groove Holder KGBA Type	Slit Tip GDM Type	Lathe Turning (Cutter) Bit GDM Model	Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA	Lathe Turning/Cutting Holder KGD Model (Combination)	Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole)	Grooved End Face Blade KGDF Type	Slit Tip (For Small Diameters) TKF Type	Lathe Turning (Cutter) Holder KGD Model (for Combination/Automatic Type)	Multi-Functional / Grooving (Cutting-Off) Chip GMM Type	Small Bore Slotting Holder [for GV Tip]	Lathe Turning/Cutting (Multi-Function) Bit GMM Model	Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] Compatible Chip	Inner Diameter Groove EZG Type (Small Inner Diameter Grooving)	Inner Diameter Shallow Groove Holder KIGBA Type	Multi-Functional / End Face Grooving Holder Compatible Tip	Slit Tip GDMS Type	Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type	Multi-Functional / Grooving (Cutting-Off) Chip GMG Type	Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving And End Surface Grooving) KGMU Type (Outer Diameter Sliding Groove Holder)	Multi-Functional / Inner Diameter Grooving Holder (KIGM-V Type)	Lathe Turning Bit Compatible Bit	Cutter Holder TKN Type	KGDS-S Type Blade for Grooving/Plunging	Small Bore Slotting System Bar, Model VNG	Small Internal Grooving Inserts Compatible Inserts (For GIV Type / GIV-E Type / GIV-W Type)	Micro Groove Cutter (Twin Bar) Model S..-STW (Circular Shank for Side Cutting Bit)	Cutter Holder TKR/L Type	Lathe Turning (Cutter) Bit GDMS Model	Lathe Turning/Cutting Holder Main Body KGD-S Model (Straight Type: 0°, Parting Type)	Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type)	Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGH Type	KGDF Type End Face Grooving GDFM/GDFMS Types	Grooved End Face Blade KFTB-S Type	Slit Tip KGD Type (for Automatic Plate)	Punching Blade KTKB-S Type	Tool Block for Holding Blade, KTKTB Type (Split Type)	Kyocera, Grooving Holder, GFVT Type	Grooved End Face Holder (for GVF Chip) GFVT Type	Outer Diameter Shallow Groove Holder KGBAS Type	Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type	Lathe Turning (Cutter) Bit GDG Model	Lathe Turning Holder KGDS-S Model (Right Angle Type: 90°, Parting Type)
From	₹ 1,496.98-	₹ 1,242.00-	₹ 10,199.04-	₹ 1,188.93-	₹ 930.42-	₹ 20,098.49-	₹ 10,478.05-	₹ 12,350.09-	₹ 8,827.91-	₹ 1,819.78-	₹ 10,048.11-	₹ 1,152.76-	₹ 15,722.69-	₹ 967.93-	₹ 1,116.60-	₹ 2,658.67-	₹ 18,807.31-	₹ 1,123.29-	₹ 900.96-	₹ 10,199.04-	₹ 1,546.55-	₹ 13,570.29	₹ 1,446.09-	₹ 1,984.53-	₹ 829.96-	₹ 6,702.02-	₹ 3,354.73-	₹ 1,183.56-	₹ 15,793.67-	₹ 829.96-	₹ 757.64-	₹ 8,352.16-	₹ 10,983.07-	₹ 12,350.09-	₹ 735.29-	₹ 16,727.24	₹ 10,048.11-	₹ 10,881.29-	₹ 20,996.38-	₹ 15,426.57-	₹ 20,098.49-	₹ 11,058.93-	₹ 11,058.93-	₹ 1,281.76-	₹ 14,378.09-
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more
Application	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Edge surface grooving	Edge surface grooving	-	-	-	-
Groove Width(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Maximum Groove Depth(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	5.1(4.6) ～ 8.1(8.1)	-	-	-	-
Selfishly	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand / No-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand / No-hand	No-hand	Right-hand	Right-hand / Left-hand	No-hand	No-hand	Right-hand / Left-hand	No-hand	Right-hand	No-hand	Right-hand / Left-hand	-	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	-	-	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand
Maximum Machining Diameter(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	50（∞） ～ 250（∞）	-	-	-	-
Number of corners for tip use	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Shank height(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...