Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

JTEKT KOYO Bearings

JTEKT KOYO offers Bearings products in the Automation Components category such as, Roller Bearings and many more products that are related to Bearings. Search and select detailed specifications of parts for your machine with free CAD downloads. JTEKT KOYO products are available to order through MISUMI online 24 hours a day. Free shipping, no minimum order.

Show More Detail Show More Detail

JTEKT KOYO Bearings

FAQ about Bearings

Question: Do you offer heat-resistant Bearings?: Answer: Yes.
Please see more details about heat-resistant in each product page below:
Heat Resistant/Grease Filled Ball Bearing/Max Operating Temperature 160Deg.C, Heat Resistant/Grease Filled Ball Bearing/Max Operating Temperature 230Deg.C or Ball Bearings for Special Environment - SUS304 Ball Bearings, Ball Bearings for Special Environment - Non-Grease, Non-Oil Plastic Ball and Plastic Ball Bearings
Question: Do you offer silicone grease for Bearings?: Answer: No
Question: What is the material of ball retainer for small stainless bearings?: Answer: SUS304
Question: Is preload applied in Radial Bearing double roll standard precision grade?: Answer: Preload is applied. However, since the class 0 combination angular bearing has a clearance setting, it is difficult to adjust the preload, and it is necessary to set the preload with the spacer or spring.
Therefore, in case deflection accuracy or high accuracy is not required, please select Angular contact bearings/ double row/ standard precision grade to reduce clearance.
If accuracy and rigidity are required, please select the Angular Contact Ball Bearing/Single/Double Row Combination that is high precision grade and satisfied operating condition.
Question: Will the inner ring of the Needle roller thrust bearings fall off during vertical use?: Answer: Since the inner ring is not fixed, it will fall off when used vertically.
Please modify the shaft with steps and fix it on the outer ring side before use.
Question: If thrust washer on one side of the Needle roller thrust bearing removed, is it still applicable to use as roller?: Answer: It is not applicable.
Without thrust washer at both side, load will not be transferred and may result in malfunction.
Question: How do I install a bearing correctly?: Answer: Ensure the bearing and housing are clean and free of debris
Apply the correct amount of lubrication
Use appropriate tools to press or heat the bearing into place without applying excessive force
Check alignment and fit to prevent misalignment and stress on the bearing
Question: What are the signs that a bearing needs to be replaced?: Answer: Unusual noise or vibration
Increased operating temperature
Excessive play or movement in the bearing
Visible signs of wear or damage
Decreased performance or efficiency