HAKKO CORPORATION Solder Wick Blotters / Desoldering Guns

• You can add up to 6 items per a category to the compare list. Compare

  

  Desoldering device - soldering station FM-2024

  HAKKO CORPORATION

  The nozzle and heater are integrated, helping increase the heat recovery efficiency. The nozzle can be replaced in a single action. The one station offers two usage methods; gun and straight.

  From: ₹ 17,459.35
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Nozzle for desoldering device - soldering station 808/809

  HAKKO CORPORATION

  Nozzle for desoldering station 808/809.
  This is a genuine product.

  From: ₹ 1,412.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SMD Reworking Hot Tweezers

  HAKKO CORPORATION

  Hot tweezers for efficient SMD reworking.
  
  [Features]
  · Can be equipped with two soldering irons.
  · The temperature of each soldering iron can be controlled using a single station.
  · Provides excellent heat recovery, an essential aspect of lead free soldering.
  · Enables both soldering and soldering removal using a single stand. The station can be equipped with two soldering irons and enables SMD reworking.
  · Excellent Heat Recovery Characteristics: A composite tip with integrated tip, heater, and sensor. Provides excellent temperature recovery performance.
  · Allows soldering at even lower set temperatures, helping mitigate the effects of heat on work pieces and increasing service life (by protecting against oxidization).
  · Power Save Function: Connect with the soldering iron stand to enable the power save function.
  · It is necessary to pre-configure the correct settings in order to use the power save function.
  · Sleep Function: Reduces tip oxidation. Increases the service life of the tip.
  · Upon inserting the soldering iron into the stand, sleep mode will activate after a time of the user's choice (between 0 to 29 minutes), and the temperature of the tip will automatically lower to 200°C.
  · Auto Power Off Function: Designed with energy conservation in mind.
  · If the tip is left in a no-load state for 30 minutes, power will be cut to the heater.

  From: ₹ 17,100.40
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solder remover station type (lead free compatible)

  HAKKO CORPORATION

  A digital type desoldering station that can also be used for soldering. Suitable for use with lead free solder.
  
  [Features]
  · Easy desoldering of lead free solder.
  · Features an integrated nozzle and heater, enabling excellent temperature recovery.
  · Enables desoldering at even lower temperatures. Makes easy work of desoldering tasks with lead free solder and multi-layered circuit boards.
  ■ Excellent suction (start-up time, pressure, and suction amount).
  · The FM-204 features a built-in vacuum pump and boasts such excellent start-up and suction performance that it reaches 80kPa within 0.3 seconds.
  · The FM-205 uses compressed air for even quicker suction pressure and start-up performance. The increased suction power makes desoldering work even easier.
  ■ Power Save Function
  · Connect with the soldering iron stand to enable the power save function.
  ■ Easy to Maintain
  · The distance between the nozzle tip and the filter pipe is short, enabling better clogging performance and increased workability.
  · Nozzles are safe and easy to replace using the nozzle remover.
  · Features a paper filter pipe. The filter pipe is made of paper and so can be disposed of after use, allowing for even easier maintenance.

  From: ₹ 61,169.13
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Nozzle for SMD Reworking with Hot Air

  HAKKO CORPORATION

  Replacement nozzle for Hot Air FR-801/FR-802/FR-803.

  From: ₹ 1,985.33
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  N1 series nozzle

  HAKKO CORPORATION

  The N1 series of replacement nozzles.
  [Features]
  A replacement nozzle for the FM-2024/204 solder sucker.

  From: ₹ 4,210.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	HAKKO CORPORATION	HAKKO CORPORATION	HAKKO CORPORATION	HAKKO CORPORATION	HAKKO CORPORATION	HAKKO CORPORATION
Product Series	Desoldering device - soldering station FM-2024	Nozzle for desoldering device - soldering station 808/809	SMD Reworking Hot Tweezers	Solder remover station type (lead free compatible)	Nozzle for SMD Reworking with Hot Air	N1 series nozzle
From	₹ 17,459.35-	₹ 1,412.07-	₹ 17,100.40-	₹ 61,169.13-	₹ 1,985.33	₹ 4,210.07-
Days to Ship	9 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	9 Day(s) or more	5 Day(s) or more

Loading...