(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 4:30 2/3 to 3:30 (IST) 3/3/2025. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
ENGINEER Screwdrivers（Shaft through：NA）
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
10 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
Ceramic Adjustment Screwdriver Set DK-90
ENGINEER
Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.
[Features]
· Uses tough zirconia-based fine ceramic bit.
· For high frequency area adjustment with complete non-inductive properties. Also ideal as a short-circuit prevention screwdriver for board protection.
· There are 2 bits at both ends to enable 4 kinds of adjustment (tip: Phillips, flathead bits / shank: hex).
· Pencil-type portable design with caps for protecting tip.
· 4 piece set of DA-48 and 50 to 52.
[Applications]
· For audio equipment such as tuners and amplifiers.
· For TV, video camera, radio-related, wireless equipment, computer-related facilities, communications equipment, etc.Tip standards Tip size / Phillips (+) Tip size / flathead (-) blade width (mm) B1 Shaft length L (mm) Single Product/Set Classification Shaft type Magnet Shaft through Bolster Grip Type Tip size / flathead (-) blade thickness (mm) B2 (Box/Hex/Ball-Point) Width Across Flats (mm) (Box/Hex/Ball-Point) Width Across Flats (inch) Phillips (+)/Flathead(-) Other 0.8 ～ 2.5 - Set Product Round NA NA NA Resin 0.35 ～ 0.7 - - From: ₹ 6,760.38 Days to Ship: 5 Day(s) or more 
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Electroscopic Screwdriver DKD-01/DKD-02
ENGINEER
Screwdriver for low voltage and automobile spark plug electrical inspection.
[Features]
· With a clip, it is convenient for carrying around.
· The built-in neon tube lights up.
[Applications]
· DKD-01: Ideal for conductivity and wireless communicator transmission tests.
· DKD-02: Ideal for vehicle spark plug voltage detection.Tip standards Tip size / Phillips (+) Tip size / flathead (-) blade width (mm) B1 Shaft length L (mm) Single Product/Set Classification Shaft type Magnet Shaft through Bolster Grip Type Tip size / flathead (-) blade thickness (mm) B2 (Box/Hex/Ball-Point) Width Across Flats (mm) (Box/Hex/Ball-Point) Width Across Flats (inch) Flathead (-) - - 28 Single Item Round NA NA NA Resin - - - From: ₹ 642.45 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Screwdriver for Special Screw and for Pentalobular Screw
ENGINEER
A special screwdriver for pentalobe screws (star-shaped screws) used in smartphones, etc.
[Features]
·Tip size: 1.3 mm diameter (DTP-03), 1.7 mm diameter (DTP-07).
[Applications]
·Ideal for tightening and removing pentalobe screws (star-shaped screws).
·mobile phone, etc.Tip standards Tip size / Phillips (+) Tip size / flathead (-) blade width (mm) B1 Shaft length L (mm) Single Product/Set Classification Shaft type Magnet Shaft through Bolster Grip Type Tip size / flathead (-) blade thickness (mm) B2 (Box/Hex/Ball-Point) Width Across Flats (mm) (Box/Hex/Ball-Point) Width Across Flats (inch) Other - - 100 Single Item Round NA NA NA Resin - - - From: ₹ 1,544.62 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Pro Grip Screwdriver DG-01 – 04
ENGINEER
Anti-slip cushion grip screwdriver with outstanding tightening force.
[Features]
· The shaft is chrome-vanadium steel.
· The tip has been black-point processed.
[Applications]
· For tightening and removing various screws.Tip standards Tip size / Phillips (+) Tip size / flathead (-) blade width (mm) B1 Shaft length L (mm) Single Product/Set Classification Shaft type Magnet Shaft through Bolster Grip Type Tip size / flathead (-) blade thickness (mm) B2 (Box/Hex/Ball-Point) Width Across Flats (mm) (Box/Hex/Ball-Point) Width Across Flats (inch) Flathead (-) - 5.5 80 Single Item Round Available NA NA Rubber 0.7 - - From: ₹ 806.78 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ENGINEER
Standard-type Phillips screwdrivers and flathead screwdrivers.
[Features]
· Selection of various sizes is enabled in accordance with work applications.
[Applications]
· For work tightening and removing Phillips screws/flathead screws.- Volume Discount
Tip standards Tip size / Phillips (+) Tip size / flathead (-) blade width (mm) B1 Shaft length L (mm) Single Product/Set Classification Shaft type Magnet Shaft through Bolster Grip Type Tip size / flathead (-) blade thickness (mm) B2 (Box/Hex/Ball-Point) Width Across Flats (mm) (Box/Hex/Ball-Point) Width Across Flats (inch) Phillips (+) No.1 - 150 Single Item Round NA NA NA Resin - - - From: ₹ 350.04 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ENGINEER
Knurled driver can perform rapid turning.
[Features]
· The shaft is made of chrome-vanadium steel, and the tip has undergone black point processing.
· A large grip that produces high clamping force.
[Applications]
· For tightening and removing various screws.Tip standards Tip size / Phillips (+) Tip size / flathead (-) blade width (mm) B1 Shaft length L (mm) Single Product/Set Classification Shaft type Magnet Shaft through Bolster Grip Type Tip size / flathead (-) blade thickness (mm) B2 (Box/Hex/Ball-Point) Width Across Flats (mm) (Box/Hex/Ball-Point) Width Across Flats (inch) Phillips (+) No.00 - 75 Single Item Round NA NA NA Resin - - - From: ₹ 450.73 Days to Ship: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ENGINEER
Screwdriver with hexagonal tip.
[Features]
· Sizes available for any size hex socket screw.
· The shaft is chrome-molybdenum steel.
[Applications]
· For tightening and removing hex socket screws.Tip standards Tip size / Phillips (+) Tip size / flathead (-) blade width (mm) B1 Shaft length L (mm) Single Product/Set Classification Shaft type Magnet Shaft through Bolster Grip Type Tip size / flathead (-) blade thickness (mm) B2 (Box/Hex/Ball-Point) Width Across Flats (mm) (Box/Hex/Ball-Point) Width Across Flats (inch) Hexagon - - 90 Single Item Square NA NA NA Resin - 2.5 - From: ₹ 132.00 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Interchangeable Precision Screwdriver
ENGINEER
The shaft length is variably adjustable over the range 18-90 mm.
Tip standards Tip size / Phillips (+) Tip size / flathead (-) blade width (mm) B1 Shaft length L (mm) Single Product/Set Classification Shaft type Magnet Shaft through Bolster Grip Type Tip size / flathead (-) blade thickness (mm) B2 (Box/Hex/Ball-Point) Width Across Flats (mm) (Box/Hex/Ball-Point) Width Across Flats (inch) Phillips (+)/Flathead(-) No.00 / No.0 2.5、3.0、4.0 18～90 Set Product Square - NA - Resin - - - From: ₹ 1,065.95 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ENGINEER
· A ratchet stubby set of frequently used +, -, and hexagon.
Tip standards Tip size / Phillips (+) Tip size / flathead (-) blade width (mm) B1 Shaft length L (mm) Single Product/Set Classification Shaft type Magnet Shaft through Bolster Grip Type Tip size / flathead (-) blade thickness (mm) B2 (Box/Hex/Ball-Point) Width Across Flats (mm) (Box/Hex/Ball-Point) Width Across Flats (inch) Combination No.00 / No.1 / No.2 4.5、6.0 - Set Product - - NA - - - - - From: ₹ 2,279.82 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
ENGINEER
· This is a set of Phillips, flathead, and hex bits that are frequently used with offset ratchets.
· Includes Rapid Turning Mechanism
· With magnetTip standards Tip size / Phillips (+) Tip size / flathead (-) blade width (mm) B1 Shaft length L (mm) Single Product/Set Classification Shaft type Magnet Shaft through Bolster Grip Type Tip size / flathead (-) blade thickness (mm) B2 (Box/Hex/Ball-Point) Width Across Flats (mm) (Box/Hex/Ball-Point) Width Across Flats (inch) Combination No.00 / No.1 / No.2 4.5、6.0 - Set Product - - NA - - - - - From: ₹ 2,136.96 Days to Ship: 5 Day(s) or more
5 Day(s) or more
| Brand |
|---|
| Product Series |
| From |
| Days to Ship |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| Brand | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER |
| Product Series | ||||||||||
| From | ₹ 6,760.38 | ₹ 642.45 | ₹ 1,544.62 | ₹ 806.78 | ₹ 350.04 | ₹ 450.73 | ₹ 132.00 | ₹ 1,065.95 | ₹ 2,279.82 | ₹ 2,136.96 |
| Days to Ship | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
| Tip standards | Phillips (+)/Flathead(-) | Flathead (-) | Other | Flathead (-) | Phillips (+) | Phillips (+) | Hexagon | Phillips (+)/Flathead(-) | Combination | Combination |
| Tip size / Phillips (+) | Other | - | - | - | No.1 | No.00 | - | No.00 / No.0 | No.00 / No.1 / No.2 | No.00 / No.1 / No.2 |
| Tip size / flathead (-) blade width (mm) B1 | 0.8 ～ 2.5 | - | - | 5.5 | - | - | - | 2.5、3.0、4.0 | 4.5、6.0 | 4.5、6.0 |
| Shaft length L (mm) | - | 28 | 100 | 80 | 150 | 75 | 90 | 18～90 | - | - |
| Single Product/Set Classification | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Set Product | Set Product |
| Shaft type | Round | Round | Round | Round | Round | Round | Square | Square | - | - |
| Magnet | NA | NA | NA | Available | NA | NA | NA | - | - | - |
| Shaft through | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| Bolster | NA | NA | NA | NA | NA | NA | NA | - | - | - |
| Grip Type | Resin | Resin | Resin | Rubber | Resin | Resin | Resin | Resin | - | - |
| Tip size / flathead (-) blade thickness (mm) B2 | 0.35 ～ 0.7 | - | - | 0.7 | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | - | - | - | 2.5 | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tip standards
- Phillips (+)
- Flathead (-)
- Phillips (+)/Flathead(-)
- Torx
- Box
- Hexagon
- Ballpoint
- Combination
- Other
-
Tip size / Phillips (+)
- No.000
- No.00
- No.0
- No.1
- No.2
- No.3
- No.4
- Other
-
Tip size / flathead (-) blade width (mm) B1
-
Shaft length L (mm)
- 5
- 9
- 10
- 11
- 13
- 14
- 15
- 17
- 18
- 18～90
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 28
- 30
- 33
- 35
- 36
- 38
- 40
- 41
- 45
- 50
- 51
- 60
- 60, 75, 80
- 65
- 67
- 70
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 80
- 80, 100, 125
- 82
- 85
- 89
- 90
- 95
- 100
- 102
- 103
- 105
- 107
- 110
- 115
- 120
- 122
- 125
- 128
- 130
- 135
- 138
- 140
- 145
- 150
- 152
- 153
- 160
- 165
- 167
- 170
- 175
- 180
- 190
- 195
- 200
- 220
- 230
- 240
- 250
- 267
- 275
- 280
- 288
- 300
- 320
- 350
- 390
- 400
- 450
- 500
- 600
-
Single Product/Set Classification
- Single Item
- Set Product
-
Shaft type
-
Magnet
- Available
- NA
-
Shaft through
- Available
- NA
-
Bolster
- Included
- NA
-
Grip Type
- Resin
- Wooden handle
- Rubber
- Stainless Steel
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Manufacturer
-
- MISUMI (1)
- PB SWISS TOOLS (69)
- VESSEL (37)
- WERA (26)
- KTC(KYOTO TOOL) (22)
- TONE (22)
- ANEX (19)
- WIHA (15)
- TRUSCO NAKAYAMA (12)
- HIRAI KOGU (11)
- KO-KEN TOOL (11)
- ENGINEER (10)
- SUNFLAG (6)
- EIGHT TOOL (4)
- HOZAN (3)
- TRAD (3)
- HAZET (2)
- SK 11 (2)
- SUEKAGE TOOL (1)
- ARC (0)
- FUJIYA (0)
- HANDIWORK (0)
- BONDHUS (0)
- E VALUE (0)
- HIOS (0)
- SMATO (0)
- SIGNET (0)
- WILLIAMS (0)
- AS ONE (0)
- ESCO (0)
How can we improve?
How can we improve?
Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy
Thank you for your cooperation.
Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.
Privacy Policy