• You can add up to 6 items per a category to the compare list. Compare

  

  Ceramic Adjustable Screwdriver (With Rotating Cap)

  ENGINEER

  Ceramic adjustment screwdriver with a compact design ideal for trimmer adjustment with lines.
  [Features]
  · It can be adjusted at 2 locations, the tip portion (+/- bit), and the shaft portion (hexagonal type).
  · High-strength, long lasting, completely non-inductive high frequency adjustment driver made of new zirconia-based fine ceramics.
  · The compact design of the included rotating cap's compact handle makes it easy to use.
  [Applications]
  · For adjustment work of variable coil, IFT and trimmer.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	1.3	18	Single Item	Round	NA	NA	NA	Resin	0.4	-	-

  From: ₹ 1,104.13
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Bit Set DR-10 – 17

  ENGINEER

  A bit set with wide lineup, optimal for service engineers.
  [Features]
  · Bit set containing frequently used bits for a variety of applications, from short bits and long stepped bits to hex bits and more.
  · Includes burette type holder for convenient bit storage and carrying.
  · DR-16 is a bit set that is ideal for rechargeable/electric screwdrivers.
  [Applications]
  · Assembly of machinery, demolition work, maintenance of equipment, work inside factories, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-) / Combination	No.00 / No.0 / No.1 / No.2	4.5 ～ 6	-	Set Product	-	Available	-	-	-	-	1.5 ～ 6	-

  From: ₹ 1,275.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Master Grip Screwdriver Set DR-52

  ENGINEER

  Master grip screwdriver set equipped with frequently used magnetized strong bits.
  [Features]
  · Bit set that is also ideal for rechargeable or electric screwdrivers.
  · The bit is made of chrome vanadium steel.
  · Burette type bit holder for convenient mobility.
  · A cushioned grip which fits well into the hand.
  [Applications]
  · For tightening and removing various screws.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.0 / No.1 / No.2	6	-	Set Product	Square	Available	-	-	Rubber	-	-	-

  From: ₹ 2,229.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Electroscopic Screwdriver DKD-01/DKD-02

  ENGINEER

  Screwdriver for low voltage and automobile spark plug electrical inspection.
  [Features]
  · With a clip, it is convenient for carrying around.
  · The built-in neon tube lights up.
  [Applications]
  · DKD-01: Ideal for conductivity and wireless communicator transmission tests.
  · DKD-02: Ideal for vehicle spark plug voltage detection.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	-	28	Single Item	Round	NA	NA	NA	Resin	-	-	-

  From: ₹ 642.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver for Special Screw and for Pentalobular Screw

  ENGINEER

  A special screwdriver for pentalobe screws (star-shaped screws) used in smartphones, etc.
  [Features]
  ·Tip size: 1.3 mm diameter (DTP-03), 1.7 mm diameter (DTP-07).
  [Applications]
  ·Ideal for tightening and removing pentalobe screws (star-shaped screws).
  ·mobile phone, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Other	-	-	100	Single Item	Round	NA	NA	NA	Resin	-	-	-

  From: ₹ 1,544.62
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ceramic Adjustment Screwdriver Set (with Rotating Cap) DK-91

  ENGINEER

  A compact design ceramic adjustment screwdriver.
  [Features]
  · High-strength, long lasting, completely non-inductive high frequency adjustment driver made of new zirconia-based fine ceramics.
  · It can be adjusted at 2 locations, the tip portion (Phillips/flathead bit), and the shaft portion (hexagonal type).
  · The compact design of the included rotating cap's compact handle makes it easy to use.
  · 8 piece set of DA-81 to DA-88.
  [Applications]
  · For audio equipment such as tuners and amplifiers.
  · For TV, video camera, radio-related, wireless equipment, computer-related facilities, communications equipment, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	Other	0.9 ～ 2.5	15 ～ 18	Set Product	Round	NA	NA	NA	Resin	0.35 ～ 0.7	-	-

  From: ₹ 5,759.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver Set for Special Screw

  ENGINEER

  Screwdriver bit series that supports various special screws.
  [Features]
  · Can be selected to suit the screw shape and application.
  [Applications]
  · For mobile phones, hard disks, toys, small radio controllers, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Torx / Other	-	-	-	Single Item	Round	Available	-	-	-	-	-	-

  From: ₹ 723.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Offset ratchet set

  ENGINEER

  · This is a set of Phillips, flathead, and hex bits that are frequently used with offset ratchets.
  · Includes Rapid Turning Mechanism
  · With magnet

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.00 / No.1 / No.2	4.5、6.0	-	Set Product	-	-	NA	-	-	-	-	-

  From: ₹ 2,136.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ratchet Stubby DR-03

  ENGINEER

  The ratchet stubby is ideal for work in tight spaces where a normal screwdriver doesn't fit.
  [Features]
  · A compact size which fits well in the hand.
  · Includes a rapid turning mechanism.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.1 / No.2	4.5 ～ 6	-	Single Item	-	Available	-	-	Rubber	-	-	-

  From: ₹ 1,318.69
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Replacement Screwdriver Set DK-05 – 08

  ENGINEER

  Replacement screwdriver set.
  [Features]
  · DK-05, 06 have a low voltage detecting grip. (80 – 300 VAC/100 – 250 VDC)
  · The neon tube embedded inside the unit will light up if you make contact with the screwdriver tip and push the head part of the handle with your finger.
  [Applications]
  · Convenient for repair and maintenance work.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2	3.5 ～ 5.5	-	Set Product	Round	NA	-	-	Resin	-	5.5	-

  From: ₹ 1,531.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ceramic Adjustment Screwdriver Set DK-90

  ENGINEER

  Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.
  [Features]
  · Uses tough zirconia-based fine ceramic bit.
  · For high frequency area adjustment with complete non-inductive properties. Also ideal as a short-circuit prevention screwdriver for board protection.
  · There are 2 bits at both ends to enable 4 kinds of adjustment (tip: Phillips, flathead bits / shank: hex).
  · Pencil-type portable design with caps for protecting tip.
  · 4 piece set of DA-48 and 50 to 52.
  [Applications]
  · For audio equipment such as tuners and amplifiers.
  · For TV, video camera, radio-related, wireless equipment, computer-related facilities, communications equipment, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	Other	0.8 ～ 2.5	-	Set Product	Round	NA	NA	NA	Resin	0.35 ～ 0.7	-	-

  From: ₹ 6,760.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Petite Ratchet

  ENGINEER

  [Features]
  · Built-in ratchet mechanism.
  · Introducing the mini stubby screwdriver.
  · Ultra-mini-size ratchet screwdriver.
  · Stubby type, ideal for use in narrow places.
  · Main body material: Aluminum.
  · Number of ratchet gears: 45.
  · Feed Angle: 8°

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)	No.2	-	-	Single Item	-	Available	-	-	Stainless Steel	-	-	-

  From: ₹ 1,441.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pro Grip Screwdriver DG-01 – 04

  ENGINEER

  Anti-slip cushion grip screwdriver with outstanding tightening force.
  [Features]
  · The shaft is chrome-vanadium steel.
  · The tip has been black-point processed.
  [Applications]
  · For tightening and removing various screws.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	5.5	80	Single Item	Round	Available	NA	NA	Rubber	0.7	-	-

  From: ₹ 806.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  

  Screwdriver, Rapid Screw Extractor

  ENGINEER

  Special dedicated screwdriver-type tool for removing stripped countersunk screws that cannot be removed using Neji-saurus screw removal pliers. No hammer required.
  [Features]
  · Dedicated screwdriver-type tool for removing screws.
  · Includes bits that can be used in places where hammering is not possible. (DBZ-51)
  · Includes bit for hex socket head screws with damaged screw recesses. (DBZ-53)
  · Includes two shock-absorbent rubber sleeves for protecting fingers.
  · Includes dedicated handle grip for applying high torque.
  [Applications]
  · Can be used for countersunk screws with stripped heads.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	-	-	-	Set Product	-	-	-	-	-	-	-	-

  From: ₹ 2,684.42
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Tip standards
Tip size / Phillips (+)
Tip size / flathead (-) blade width (mm) B1
Shaft length L (mm)
Single Product/Set Classification
Shaft type
Magnet
Shaft through
Bolster
Grip Type
Tip size / flathead (-) blade thickness (mm) B2
(Box/Hex/Ball-Point) Width Across Flats (mm)
(Box/Hex/Ball-Point) Width Across Flats (inch)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER	ENGINEER
Product Series	Ceramic Adjustable Screwdriver (With Rotating Cap)	Bit Set DR-10 – 17	Master Grip Screwdriver Set DR-52	Electroscopic Screwdriver DKD-01/DKD-02	Screwdriver for Special Screw and for Pentalobular Screw	Ceramic Adjustment Screwdriver Set (with Rotating Cap) DK-91	Screwdriver Set for Special Screw	Offset ratchet set	Ratchet Stubby DR-03	Replacement Screwdriver Set DK-05 – 08	Ceramic Adjustment Screwdriver Set DK-90	Petite Ratchet	Pro Grip Screwdriver DG-01 – 04	Screwdriver, Rapid Screw Extractor
From	₹ 1,104.13	₹ 1,275.02-	₹ 2,229.47	₹ 642.45	₹ 1,544.62	₹ 5,759.85	₹ 723.73-	₹ 2,136.96	₹ 1,318.69	₹ 1,531.38	₹ 6,760.38	₹ 1,441.65	₹ 806.78	₹ 2,684.42
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Tip standards	Flathead (-)	Phillips (+)/Flathead(-) / Combination	Phillips (+)/Flathead(-)	Flathead (-)	Other	Phillips (+)/Flathead(-)	Torx / Other	Combination	Phillips (+)/Flathead(-)	Combination	Phillips (+)/Flathead(-)	Phillips (+)	Flathead (-)	Combination
Tip size / Phillips (+)	-	No.00 / No.0 / No.1 / No.2	No.0 / No.1 / No.2	-	-	Other	-	No.00 / No.1 / No.2	No.1 / No.2	No.1 / No.2	Other	No.2	-	-
Tip size / flathead (-) blade width (mm) B1	1.3	4.5 ～ 6	6	-	-	0.9 ～ 2.5	-	4.5、6.0	4.5 ～ 6	3.5 ～ 5.5	0.8 ～ 2.5	-	5.5	-
Shaft length L (mm)	18	-	-	28	100	15 ～ 18	-	-	-	-	-	-	80	-
Single Product/Set Classification	Single Item	Set Product	Set Product	Single Item	Single Item	Set Product	Single Item	Set Product	Single Item	Set Product	Set Product	Single Item	Single Item	Set Product
Shaft type	Round	-	Square	Round	Round	Round	Round	-	-	Round	Round	-	Round	-
Magnet	NA	Available	Available	NA	NA	NA	Available	-	Available	NA	NA	Available	Available	-
Shaft through	NA	-	-	NA	NA	NA	-	NA	-	-	NA	-	NA	-
Bolster	NA	-	-	NA	NA	NA	-	-	-	-	NA	-	NA	-
Grip Type	Resin	-	Rubber	Resin	Resin	Resin	-	-	Rubber	Resin	Resin	Stainless Steel	Rubber	-
Tip size / flathead (-) blade thickness (mm) B2	0.4	-	-	-	-	0.35 ～ 0.7	-	-	-	-	0.35 ～ 0.7	-	0.7	-
(Box/Hex/Ball-Point) Width Across Flats (mm)	-	1.5 ～ 6	-	-	-	-	-	-	-	5.5	-	-	-	-
(Box/Hex/Ball-Point) Width Across Flats (inch)	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...