AXEL Ultra-Hard Bars（Shape：Cylinder type）

• You can add up to 6 items per a category to the compare list. Compare

  

  Ultra-Hard Rotary Bar Type A A Series Spiral Cut (S)

  AXEL

  [Features]
  · This provides a smoother finishing surface compared to Master Cut, with less clogging than Master Cut.

  Shape	Product Type	Shank Material	Blade tip shape	blade diameter(mm)	Blade Length(mm)
  Cylinder type	shank diameter 3 mm	All Carbide	Spiral cut	ø1.6 ～ ⌀3.0	4.8 ～ 14

  From: ₹ 1,647.22
  Days to Ship: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ultra-Hard Rotary Bar Type A A Series Master Cut

  AXEL

  [Features]
  · Most commonly used blade shape with good cutting ability and favorable finishing surface.
  · Chips are nearly granular and are safe.

  Shape	Product Type	Shank Material	Blade tip shape	blade diameter(mm)	Blade Length(mm)
  Cylinder type	shank diameter 3 mm	All Carbide	Cross Cut	ø1.6 ～ ⌀3.0	4.8 ～ 14

  From: ₹ 1,647.22
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ultra-Hard Rotary Bar Type A A Series End Cut (E)

  AXEL

  [Features]
  · Can place a cut blade on the end surface of an A type rotary bar to cut the bottom surface.

  Shape	Product Type	Shank Material	Blade tip shape	blade diameter(mm)	Blade Length(mm)
  Cylinder type	shank diameter 3 mm	All Carbide	Cross End Cut	⌀3.0	14

  From: ₹ 2,078.51
  Days to Ship: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Accel Carbide Rotary Bar Type A/B Series Master Cut A-14/A-21

  AXEL

  [Features]
  · Most commonly used blade shape with good cutting ability and favorable finishing surface.
  · Chips are nearly granular and are safe.

  Shape	Product Type	Shank Material	Blade tip shape	blade diameter(mm)	Blade Length(mm)
  Cylinder type	shank diameter 3 mm	-	Cross Cut	ø4.0 ～ ø4.8	12.7

  From: ₹ 3,578.62
  Days to Ship: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Accel Carbide Rotary Bar Type A/B Series Master Cut A-51

  AXEL

  [Features]
  · Most commonly used blade shape with good cutting ability and favorable finishing surface.
  · Chips are nearly granular and are safe.

  Shape	Product Type	Shank Material	Blade tip shape	blade diameter(mm)	Blade Length(mm)
  Cylinder type	shank diameter 3 mm	-	Cross Cut	ø6.4	13

  From: ₹ 2,874.11
  Days to Ship: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ultra-Hard Rotary Bar Type A B Series End Cut (E)

  AXEL

  [Features]
  · Can place a cut blade on the end surface of an A type rotary bar to cut the bottom surface.

  Shape	Product Type	Shank Material	Blade tip shape	blade diameter(mm)	Blade Length(mm)
  Cylinder type	shank diameter 3 mm	-	Cross End Cut	ø6.4	13

  From: ₹ 3,261.18
  Days to Ship: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ultra-Hard Rotary Bar Type A B Series Spiral Cut (S)

  AXEL

  [Features]
  · This provides a smoother finishing surface compared to Master Cut, with less clogging than Master Cut.

  Shape	Product Type	Shank Material	Blade tip shape	blade diameter(mm)	Blade Length(mm)
  Cylinder type	shank diameter 3 mm	-	Spiral cut	ø6.4	13

  From: ₹ 2,874.11
  Days to Ship: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ultra-Hard Rotary Bar Type A C Series Master Cut

  AXEL

  [Features]
  · Most commonly used blade shape with good cutting ability and favorable finishing surface.
  · Chips are nearly granular and are safe.

  Shape	Product Type	Shank Material	Blade tip shape	blade diameter(mm)	Blade Length(mm)
  Cylinder type	shank diameter 6 mm	All Carbide	Cross Cut	ø6.0 ～ ø15.9	16 ～ 25

  From: ₹ 2,784.67
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ultra-Hard Rotary Bar Type A C Series End Cut (E)

  AXEL

  [Features]
  · Can place a cut blade on the end surface of an A type rotary bar to cut the bottom surface.

  Shape	Product Type	Shank Material	Blade tip shape	blade diameter(mm)	Blade Length(mm)
  Cylinder type	shank diameter 6 mm	All Carbide	Cross End Cut	ø6.0 ～ ø12.7	16 ～ 25

  From: ₹ 3,143.64
  Days to Ship: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ultra-Hard Rotary Bar Type A C Series Spiral Cut (S)

  AXEL

  [Features]
  · This provides a smoother finishing surface compared to Master Cut, with less clogging than Master Cut.

  Shape	Product Type	Shank Material	Blade tip shape	blade diameter(mm)	Blade Length(mm)
  Cylinder type	shank diameter 6 mm	All Carbide	Spiral cut	ø6.0 ～ ø12.7	16 ～ 25

  From: ₹ 2,826.20
  Days to Ship: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Rotary Bar A/C Series for Aluminum Cutting (Aluminum Cut) A

  AXEL

  Aluminum Cut: Special cutting edge shape only for light metals and non-ferrous metals (aluminum, magnesium, brass, etc.).
  The chip gullet is wide and the tooth width is thick, making it ideal for cutting plastics.

  Shape	Product Type	Shank Material	Blade tip shape	blade diameter(mm)	Blade Length(mm)
  Cylinder type	shank diameter 6 mm	-	Aluminum Cut	ø9.5 ～ ø19.1	19 ～ 25

  From: ₹ 4,759.49
  Days to Ship: 12 Day(s) or more

  12 Day(s) or more

Brand
Product Series
From
Days to Ship
Shape
Product Type
Shank Material
Blade tip shape
blade diameter(mm)
Blade Length(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	AXEL	AXEL	AXEL	AXEL	AXEL	AXEL	AXEL	AXEL	AXEL	AXEL	AXEL
Product Series	Ultra-Hard Rotary Bar Type A A Series Spiral Cut (S)	Ultra-Hard Rotary Bar Type A A Series Master Cut	Ultra-Hard Rotary Bar Type A A Series End Cut (E)	Accel Carbide Rotary Bar Type A/B Series Master Cut A-14/A-21	Accel Carbide Rotary Bar Type A/B Series Master Cut A-51	Ultra-Hard Rotary Bar Type A B Series End Cut (E)	Ultra-Hard Rotary Bar Type A B Series Spiral Cut (S)	Ultra-Hard Rotary Bar Type A C Series Master Cut	Ultra-Hard Rotary Bar Type A C Series End Cut (E)	Ultra-Hard Rotary Bar Type A C Series Spiral Cut (S)	Carbide Rotary Bar A/C Series for Aluminum Cutting (Aluminum Cut) A
From	₹ 1,647.22	₹ 1,647.22-	₹ 2,078.51	₹ 3,578.62	₹ 2,874.11	₹ 3,261.18	₹ 2,874.11	₹ 2,784.67-	₹ 3,143.64-	₹ 2,826.20-	₹ 4,759.49-
Days to Ship	12 Day(s) or more	11 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	6 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more
Shape	Cylinder type	Cylinder type	Cylinder type	Cylinder type	Cylinder type	Cylinder type	Cylinder type	Cylinder type	Cylinder type	Cylinder type	Cylinder type
Product Type	shank diameter 3 mm	shank diameter 3 mm	shank diameter 3 mm	shank diameter 3 mm	shank diameter 3 mm	shank diameter 3 mm	shank diameter 3 mm	shank diameter 6 mm	shank diameter 6 mm	shank diameter 6 mm	shank diameter 6 mm
Shank Material	All Carbide	All Carbide	All Carbide	-	-	-	-	All Carbide	All Carbide	All Carbide	-
Blade tip shape	Spiral cut	Cross Cut	Cross End Cut	Cross Cut	Cross Cut	Cross End Cut	Spiral cut	Cross Cut	Cross End Cut	Spiral cut	Aluminum Cut
blade diameter(mm)	ø1.6 ～ ⌀3.0	ø1.6 ～ ⌀3.0	⌀3.0	ø4.0 ～ ø4.8	ø6.4	ø6.4	ø6.4	ø6.0 ～ ø15.9	ø6.0 ～ ø12.7	ø6.0 ～ ø12.7	ø9.5 ～ ø19.1
Blade Length(mm)	4.8 ～ 14	4.8 ～ 14	14	12.7	13	13	13	16 ～ 25	16 ～ 25	16 ～ 25	19 ～ 25

Loading...