(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Plug Gauges / Screw Gauges（Page2）
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
111 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
Taper Thread Gauge (TG) for Pipes, Taper Thread (R) JIS (ISO Certified) for Pipes Plug
OSG
[Features]
· Screw gauge used for inspecting tapered pipe screws and for testing parallel female screws that fit to tapered screws.Product Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge R1-11 ～ R3/8-19 - - - - From: ₹ 21,801.67 Days to Ship: 6 Day(s) or more 
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Limit Screw Ring Gauges, ISO Method JISB0251/0252
SOKUHANSHA
[Features]
· Uses the limit system, the most common method for parallel screw gauges, in which the accuracy is guaranteed by managing the limit of the product screws for through/blind.
· There are two basic limit types: the ISO classification gauge type and the conventional JIS classification gauge type.
· The conventional JIS gauge system distinguished inspection and machining on the gauge no-go side, but the ISO gauge system is simplified, removing this distinction.
· Scissors-type gauge for exterior use is the same.Product Type Nominal Pitch P Workpiece Class Standard Thread ring gauge 4 ～ 8 0.7 ～ 1.25 Male thread 6g - From: ₹ 18,458.60 Days to Ship: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Tapered Thread Gauge (R) For Piping, Plug Gauge
DAIICHISOKUHAN
[Features]
· This gauge is used for inspecting bindings requiring a certain level of density, which are used for connection of pipes, fittings, etc.
· A passing result is obtained when the end face is within the notch marks given on the gauge.
· This tapered thread gauge is used for R (Rc, Rp) inspections as stipulated in JIS B 0203.
· Note that a PT model is also available and R is different than PT.Product Type Nominal Pitch P Workpiece Class Standard - 1/8 ～ 3/4 14 ～ 28 - - - From: ₹ 24,426.27 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Screw Gauge (SG) Metric (M) Screw J Class Set Ring
OSG
[Features]
· An accurately made gauge based on standard screw pitch and standard screw dimensions.Product Type Nominal Pitch P Workpiece Class Standard Thread ring gauge M1.4X0.3 ～ M60X5.5 - - - - From: ₹ 12,271.87 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Screw Limit Gauge (LG), Whitworth (W) Screw, Class 2 (Old JIS), Ring
OSG
[Features]
·Limit gauge Whitworth thread for the Class 2 (former JIS standard-compliant).Product Type Nominal Pitch P Workpiece Class Standard Thread ring gauge W1-8 ～ W9/16-12 - - - - From: ₹ 20,588.18 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![Screw Limit Gauge (LG), Metric (M) Screw, Left Thread, [Fitting Classification: Medium], JIS (ISO Grade), Plug](//in.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000431678.jpg?$product_view_b$)
OSG
[Features]
·Left-hand thread Fitting class: Middle
Accuracy: 5H, 6H
Thread type: Metric threadProduct Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge M1.4X0.3-L ～ M30X3.5-L - - - - From: ₹ 7,901.44 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Screw Limit Gauge (LG), Metric (M) Screw, Class 3 (Old JIS), Plug
OSG
[Features]
·Thread gauge for the Class 3 accuracy (former JIS standard-compliant), metric thread.Product Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge M2X0.4 ～ M16X2 - - - - From: ₹ 6,201.75 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Taper Thread Gauge (TG) for Pipes, Taper Thread Gauge (PT) (Conventional JIS) for Pipes Plug
OSG
[Features]
· Screw gauge used for inspecting tapered pipe screws and for testing parallel female screws that fit to tapered screws.Product Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge PT1-11 ～ PT7/8-14 - - - - From: ₹ 16,702.60 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Slim Handle Stopper Gauge H7 (For Construction Work)
NIIGATA SEIKI (SK)
Plug gauge and screw gauge enabling inspection of deep holes that cannot be measured by a standard plug gauge.
[Features]
· Enables inspection of deep holes that cannot be inspected with a plug gauge, because the handle is thinner than the hole gauge part.
[Applications]
· Hole diameter inspections, etc.Product Type Nominal Pitch P Workpiece Class Standard Limit Plug Gauge φ3 ～ φ20 - - H7 - From: ₹ 9,104.80 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Fine], JIS (ISO Grade), Plug](//in.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223004978690_002.jpg?$product_view_b$)
Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Fine], JIS (ISO Grade), Plug
OSG
Product type: Thread plug gauge
Thread type: Metric thread Accuracy: 5HProduct Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge M2X0.4 ～ M36X4 - - - - From: ₹ 7,112.53 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Limit Screw Plug Gauge for Making Old JIS Plug
DAIICHISOKUHAN
Plug gauge for machining that supports previous JIS standards
Product Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge 2 ～ 20 0.4 ～ 2.5 Female Thread For JIS Grade 2 Screw JIS Standard From: ₹ 13,726.44 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Limit Screw Ring Gauge for Old JIS Ring Test
DAIICHISOKUHAN
Classic ring gauge for inspections that supports previous JIS standards
Product Type Nominal Pitch P Workpiece Class Standard Thread ring gauge 2 ～ 20 0.4 ～ 2.5 Male thread For JIS Grade 2 Screw JIS Standard From: ₹ 27,206.98 Days to Ship: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Screw Limit Gauge (Plug Gauge)
MORIMOTO SHAFT
[Features]
· Industrial Thread Gauge
· ISO Standard
· Material: GCR15 (SUJ2 Equivalent)
· Abrasion resistance: Quench hardening HRC 58 to 63
· PG0204, PG025045, PG03035 and PG0305 models have pointed tips.
· There is some variation in the overall length.Product Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge M2 ～ M30 0.35 ～ 3 - Equivalent to Former JIS2 Grade - From: ₹ 3,897.98 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Parallel Threading Plug Gauge For Piping (Go Only)
DAIICHISOKUHAN
[Features]
· This gauge is used to inspect threading used in mechanical couplings which do not require a certain level of density.
· This is a plug gauge for one side of a Go Plug (GP).Product Type Nominal Pitch P Workpiece Class Standard - 1/2 ～ 3/8 14 ～ 19 - - - From: ₹ 12,104.25 Days to Ship: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Parallel Threaded Ring Gauge For Piping (Single Item)
DAIICHISOKUHAN
[Features]
· This gauge is used to inspect threading used in mechanical couplings which do not require a certain level of density.
· Go Ring (GR) and No-Go Ring (NR) are sold separately, so please select either GR or NR before making a purchase.Product Type Nominal Pitch P Workpiece Class Standard - 1/2 ～ 3/8 14 ～ 19 - A/B Common ～ B - From: ₹ 23,927.55 Days to Ship: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Limit Plug Gauge for Insert Screw (HL-LG) Unified (U) Screw, 2B Level
OSG
[Features]
・ 2B Class plug gauge.
Accuracy: 2B
Thread type: Unified threadProduct Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge No.10-32UNF ～ 7/16-14UNC - Female Thread 2B - From: ₹ 8,569.80 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Screw Limit Gauge (LG), Unified (U) Screw, Class 2B (Old JIS), Plug
OSG
[Features]
·Limit gauge unified thread for the Class 2B (former JIS standard-compliant).Product Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge NO0-80UNF ～ NO12-24UNC - - - - From: ₹ 6,870.11 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Screw Limit Gauge (LG), Metric (M) Screw, Left Thread, Class 2 (Old JIS), Ring
OSG
[Features]
·Left-hand thread gauge, metric thread for the Class 2 (former JIS standard-compliant).Product Type Nominal Pitch P Workpiece Class Standard Thread ring gauge M1.4X0.3-L ～ M30X3.5-L - - - - From: ₹ 15,367.22 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ring A Grade (Conventional JIS) Parallel Thread Gauge(LG) (PF) for Pipes
OSG
[Features]
·Thread gauge for the Class A (former JIS standard-compliant).
Thread type: Parallel pipe threadProduct Type Nominal Pitch P Workpiece Class Standard Thread ring gauge PF1-11 ～ PF7/8-14 - - - - From: ₹ 18,766.60 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ring B Grade (Conventional JIS) Parallel Thread Gauge(LG) (PS) for Pipes
OSG
Conventionally JIS standard compliant.
Product type: Thread ring gauge
Thread type: Parallel pipe threadProduct Type Nominal Pitch P Workpiece Class Standard Thread ring gauge PS1-11 ～ PS7/8-14 - - - - From: ₹ 18,766.60 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Parallel Thread Gauge (LG) (PF) A Grade (Conventional JIS) for Pipes Plug
OSG
[Features]
·Parallel pipe thread gauge for the Class A accuracy (former JIS standard-compliant).Product Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge PF1-11 ～ PF7/8-14 - - - - From: ₹ 9,479.24 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Steel Limit Plug Gauge H7 (For Manufacturing)
NIIGATA SEIKI (SK)
Limit plug gauge using a steel pin gauge.
[Features]
· Economical as the pin gauge can be replaced when worn.
· A pair of gauges with external dimensions based on the maximum and minimum allowable dimensions as references, for obtaining fit compatibility between the hole and the shaft.
[Applications]
· Used for hole diameter inspections.Product Type Nominal Pitch P Workpiece Class Standard Limit Plug Gauge φ3 ～ φ20 - - H7 - From: ₹ 5,118.00 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NIIGATA SEIKI (SK)
An extremely useful screw gauge for those times when it is not possible to measure using a conventional screw pin gauge.
[Features]
· Thread changes to 1/15 taper thread in the middle so that the unit can be fixed on a workpiece with a taper screw.
· Can be used for measurements where chamfering of the screw hole is not possible, or where the screw hole is angled against workpiece surface, etc.
· Also ideal for deburring.
[Applications]
· Used for measuring between screw hole centers or for positioning screw holes.Product Type Nominal Pitch P Workpiece Class Standard Thread Pin Gauge M1 ～ M18 0.25 ～ 1.75 - - - From: ₹ 3,089.00 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Carbide Step Limit Plug Gauge H7
NIIGATA SEIKI (SK)
A plug gauge with Go and No-Go in one area, eliminating the need to change the direction of the gauge and improving efficiency.
[Features]
· A pair of gauges with external dimensions based on the maximum and minimum allowable dimensions as references.
· Can be used for obtaining fit compatibility between the hole and the shaft.
· Excellent abrasion resistance and very economical with a lifespan approximately 20 to 30 times longer than steel.
· Low thermal expansion coefficient (1/2 that of steel, 5x10-6/K) reduces the influence of temperature.
· High hardness eliminates worries about scratching the surface.
· Gauge management is easy. (The periodic gauge inspection interval is lengthened, making it economical.)
[Applications]
· Used for hole diameter inspections.Product Type Nominal Pitch P Workpiece Class Standard Limit Plug Gauge φ10 ～ φ30 - - - - From: ₹ 27,921.36 Days to Ship: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ceramic, Step Limit Plug Gauge H7
NIIGATA SEIKI (SK)
A plug gauge with Go and No-Go in one area, eliminating the need to change the direction of the gauge and improving efficiency.
[Features]
· A pair of gauges with external dimensions based on the maximum and minimum allowable dimensions as references.
· Can be used for obtaining fit compatibility between the hole and the shaft.
· Material with exceptional wear resistance in comparison with steel, which strongly resists changes over time.
· No concerns about rust or corrosion on the measurement surface, with extremely simple maintenance and management after use.
· Material with a thermal expansion coefficient almost identical to steel. Measurement surface is nonmagnetic material that will not become magnetized.
· There is little change in plasticity due to scratches or dents and there are no burrs or bulges.
[Applications]
· Used for hole diameter inspections.Product Type Nominal Pitch P Workpiece Class Standard Limit Plug Gauge φ10 ～ φ30 - - - - From: ₹ 36,240.33 Days to Ship: 24 Day(s) or more
24 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Limit Screw Ring Set for Testing
NIIGATA SEIKI (SK)
Essential product for checking thread precision. Screw gauge enabling easy checking of screw accuracy on the Go and No Go sides.
[Features]
· Inspects the upper limit and lower limit of the predetermined dimension accuracy of the screw part.
· Machining (GRWR) and ISO system specifications can also be manufactured.
· The gauge classifications for screw limit gauge are determined with the same grades as the screws to be measured.
· If the gauge GO side is passed through comfortably and the NO GO side does not screw in two turns or more, then the screw is judged to have passed.
[Applications]
· Used for inspecting screws.Product Type Nominal Pitch P Workpiece Class Standard Thread ring gauge M2 ～ M20 0.4 ～ 2.5 Female Thread - - From: ₹ 21,365.02 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Limit Plug Gauge For Old JIS Work
DAIICHISOKUHAN
[Features]
· This aperture limit gauge features a measurement surface based on minimum substantial aperture dimensions as well as a measurement surface based on maximum substantial aperture dimensions.
· This plug gauge is designed for work employing old JIS standards.Product Type Nominal Pitch P Workpiece Class Standard - 1 ～ 50 - - H7 - From: ₹ 6,296.18 Days to Ship: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ring B Grade (Conventional JIS) Parallel Thread Gauge(LG) (PF) for Pipes
OSG
[Features]
·Thread gauge for the Class B (former JIS standard-compliant).
Accuracy: B
Thread type: Parallel pipe threadProduct Type Nominal Pitch P Workpiece Class Standard Thread ring gauge PF1-11 ～ PF3/8-19 - - - - From: ₹ 18,646.05 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Screw Limit Gauge (LG), Sewing Machine (SM) Screw, Class 2 (Old JIS), Ring
OSG
[Features]
·Thread gauge for the Class 2 (former JIS standard-compliant).
Accuracy: 2
Thread type: Sewing-machine threadProduct Type Nominal Pitch P Workpiece Class Standard Thread ring gauge SM1/4-40 ～ SM15/64-28 - - - - From: ₹ 18,888.49 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Screw Limit Gauge (LG), Metric (M) Screw, for Pre-Plating, Class 2 -0.03 (Old JIS), Ring
OSG
[Features]
・ For pre-plating.
Accuracy: 2-0.03
Thread type: Metric threadProduct Type Nominal Pitch P Workpiece Class Standard Thread ring gauge M2X0.4 ～ M20X2.5 - - - - From: ₹ 15,367.22 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Screw Limit Gauge (LG), Metric (M) Screw, Left Thread, Class 2 (Old JIS), Plug
OSG
[Features]
·Class 2 (former JIS standard compliant)
·Left-hand thread, limit gauge, metric threadProduct Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge M1.4X0.3-L ～ M30X3.5-L - - - - From: ₹ 7,779.55 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Abrasion Inspection Screw Plug Gauge (LCG), Metric (M) Screw, Class 2 (Former JIS)
OSG
[Features]
·Thread gauge for the Class 2 (former JIS standard-compliant).
Thread type: Metric thread Symbol: GW
Accuracy: 2Product Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge M1.4X0.3 ～ M30X3.5 - - - - From: ₹ 9,214.04 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Taper Thread Gauge(TG) for Pipes and Taper (NPT) Thread for American Style Pipes Ring
OSG
[Features]
· American standard (ANSI) pipe taper thread gauge.Product Type Nominal Pitch P Workpiece Class Standard Thread ring gauge 1-11-1/2NPT ～ 4-8NPT - - - - From: ₹ 32,486.02 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![Screw Limit Gauge (LG), Metric (M) Screw, for Pre-Plating, [Fitting Classification: Medium], Class 6H +0.03 JIS (ISO Grade), Plug](//in.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000432028.jpg?$product_view_b$)
OSG
[Features]
・ For pre-plating.
Fitting class: Middle
Accuracy: 6H+0.03Product Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge M2X0.4 ～ M20X2.5 0.4 ～ 2.5 Female Thread 6H JIS Standard From: ₹ 7,901.44 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Limit Plug Gauge for Insert Screw (HL-LG) Meter (M) Screw, Level 2
OSG
[Features]
·Thread limit plug gauge with 2nd class accuracy, metric thread.Product Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge M2.6X0.45 ～ M20X2.5 0.45 ～ 2.5 Female Thread 2 - From: ₹ 7,597.40 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Screw Gauge (SG) Parallel Screw for Pipes (PF/PS) J Class Plug
OSG
[Features]
· An accurately made gauge based on standard screw pitch and standard screw dimensions.Product Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge PF1-11 ～ PS7/8-14 - - - - From: ₹ 9,479.24 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Screw Gauge (SG) Parallel Screw for Pipes (PF/PS) J Class Set Product
OSG
[Features]
· An accurately made gauge based on standard screw pitch and standard screw dimensions.Product Type Nominal Pitch P Workpiece Class Standard Thread ring gauge / Thread Plug Gauge PF1-11 ～ PS7/8-14 - - - - From: ₹ 27,993.69 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Limit Screw Plug Gauge for Old JIS Plug Test
DAIICHISOKUHAN
Plug gauge for inspections that supports previous JIS standards
[Features]
· Using a screw gauge to determine pass/fail of parallel screws, this limit type is the most general method.
· In order to judge the acceptability of product screws, inspection is conducted using the Go and No Go side gauges, demonstrating high precision.Product Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge 2 ～ 20 0.4 ～ 2.5 Female Thread For JIS Grade 2 Screw JIS Standard From: ₹ 13,726.44 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Tapered Pipe Thread Ring Gauge (PT)
SOKUHANSHA
A gauge used for inspecting screws (PT) whose main purpose is mechanical connection where sealing is not necessary, for the connection of pipes, parts for pipes, fluidic devices, etc.
Product Type Nominal Pitch P Workpiece Class Standard Thread ring gauge 3/4 Ridge 14 Male thread - - From: ₹ 38,272.25 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ceramic Limited Stopper Gauge H7 (for Construction Work)
NIIGATA SEIKI (SK)
Ceramic plug gauge has excellent durability that eliminates concerns about rust and corrosion on the measurement surface, and is exceptionally workable and economical.
[Features]
· A pair of gauges with external dimensions based on the maximum and minimum allowable dimensions as references.
· Can be used for obtaining fit compatibility between the hole and the shaft.
· Material with exceptional wear resistance in comparison with steel, which strongly resists changes over time.
· No concerns about rust or corrosion on the measurement surface, with extremely simple maintenance and management after use.
· Material with a thermal expansion coefficient almost identical to steel. Measurement surface is nonmagnetic material that will not become magnetized.
· There is little change in plasticity due to scratches or dents and there are no burrs or bulges.
· Includes an inspection results chart.
[Applications]
· Used for hole diameter inspections.Product Type Nominal Pitch P Workpiece Class Standard Limit Plug Gauge φ10 ～ φ30 - - - - From: ₹ 21,452.09 Days to Ship: 23 Day(s) or more
23 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
DAIICHISOKUHAN
A gauge used for inspection whose main purpose is connection where sealing is required, for the connection of pipes, pipe joints, etc. If the end face is within the range of the gauge notch length, it will pass.
A taper thread gauge used for inspection of R (Rc, Rp) stipulated in JIS B 0203. PT is also available but the gauge is different for R and PT.Product Type Nominal Pitch P Workpiece Class Standard - 1/2 ～ 3/4 14 ～ 28 - - - From: ₹ 36,570.89 Days to Ship: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
EISEN
Three-needle gauge for thread measurement to determine effective diameter of thread.
Pin of three-needle gauge can be removed from chain.Product Type Nominal Pitch P Workpiece Class Standard - 0.1155 - - - - From: ₹ 15,663.29 Days to Ship: 23 Day(s) or more
23 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Parallel Thread Gauge (LG) (PF) B Grade (Conventional JIS) for Pipes Plug
OSG
[Features]
·Thread gauge for the Class B (former JIS standard-compliant).
Accuracy: BProduct Type Nominal Pitch P Workpiece Class Standard Thread Plug Gauge PF1-11 ～ PF3/8-19 - - - - From: ₹ 9,418.96 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Standard Screw Gauge (SG) Whitworth (W) Screw J Class Set Product
OSG
[Features]
· An accurately made gauge based on standard screw pitch and standard screw dimensions.Product Type Nominal Pitch P Workpiece Class Standard Thread ring gauge / Thread Plug Gauge W1-8 ～ W7/16-14 - - - - From: ₹ 30,786.33 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Screw Limit Gauge (LG), Metric (M) Screw, Class 3 (Old JIS), Ring
OSG
[Features]
·Thread gauge for the Class 3 (former JIS standard-compliant).
Accuracy: 3
Thread type: Metric threadProduct Type Nominal Pitch P Workpiece Class Standard Thread ring gauge M2X0.4 ～ M16X2 - - - - From: ₹ 12,211.60 Days to Ship: 5 Day(s) or more
5 Day(s) or more
![Screw Limit Gauge (LG), Metric (M) Screw, Left Thread, [Fitting Classification: Medium], JIS (ISO Grade), Plug](http://in.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000431678.jpg?$product_view_b$)
![Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Fine], JIS (ISO Grade), Plug](http://in.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223004978690_002.jpg?$product_view_b$)
![Screw Limit Gauge (LG), Metric (M) Screw, for Pre-Plating, [Fitting Classification: Medium], Class 6H +0.03 JIS (ISO Grade), Plug](http://in.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000432028.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| From |
| Days to Ship |
| Product Type |
| Nominal |
| Pitch P |
| Workpiece |
| Class |
| Standard |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![Screw Limit Gauge (LG), Metric (M) Screw, Left Thread, [Fitting Classification: Medium], JIS (ISO Grade), Plug](http://in.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000431678.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Fine], JIS (ISO Grade), Plug](http://in.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223004978690_002.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![Screw Limit Gauge (LG), Metric (M) Screw, for Pre-Plating, [Fitting Classification: Medium], Class 6H +0.03 JIS (ISO Grade), Plug](http://in.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000432028.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| Brand | OSG | SOKUHANSHA | DAIICHISOKUHAN | OSG | OSG | OSG | OSG | OSG | NIIGATA SEIKI (SK) | OSG | DAIICHISOKUHAN | DAIICHISOKUHAN | MORIMOTO SHAFT | DAIICHISOKUHAN | DAIICHISOKUHAN | OSG | OSG | OSG | OSG | OSG | OSG | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | DAIICHISOKUHAN | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | DAIICHISOKUHAN | SOKUHANSHA | NIIGATA SEIKI (SK) | DAIICHISOKUHAN | EISEN | OSG | OSG | OSG |
| Product Series | Taper Thread Gauge (TG) for Pipes, Taper Thread (R) JIS (ISO Certified) for Pipes Plug | Screw Limit Gauge (LG), Whitworth (W) Screw, Class 2 (Old JIS), Ring | Screw Limit Gauge (LG), Metric (M) Screw, Class 3 (Old JIS), Plug | Taper Thread Gauge (TG) for Pipes, Taper Thread Gauge (PT) (Conventional JIS) for Pipes Plug | Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Fine], JIS (ISO Grade), Plug | Limit Plug Gauge for Insert Screw (HL-LG) Unified (U) Screw, 2B Level | Screw Limit Gauge (LG), Unified (U) Screw, Class 2B (Old JIS), Plug | Screw Limit Gauge (LG), Metric (M) Screw, Left Thread, Class 2 (Old JIS), Ring | Ring A Grade (Conventional JIS) Parallel Thread Gauge(LG) (PF) for Pipes | Ring B Grade (Conventional JIS) Parallel Thread Gauge(LG) (PS) for Pipes | Parallel Thread Gauge (LG) (PF) A Grade (Conventional JIS) for Pipes Plug | Ring B Grade (Conventional JIS) Parallel Thread Gauge(LG) (PF) for Pipes | Screw Limit Gauge (LG), Sewing Machine (SM) Screw, Class 2 (Old JIS), Ring | Screw Limit Gauge (LG), Metric (M) Screw, for Pre-Plating, Class 2 -0.03 (Old JIS), Ring | Screw Limit Gauge (LG), Metric (M) Screw, Left Thread, Class 2 (Old JIS), Plug | Abrasion Inspection Screw Plug Gauge (LCG), Metric (M) Screw, Class 2 (Former JIS) | Taper Thread Gauge(TG) for Pipes and Taper (NPT) Thread for American Style Pipes Ring | Limit Plug Gauge for Insert Screw (HL-LG) Meter (M) Screw, Level 2 | Standard Screw Gauge (SG) Parallel Screw for Pipes (PF/PS) J Class Plug | Standard Screw Gauge (SG) Parallel Screw for Pipes (PF/PS) J Class Set Product | Parallel Thread Gauge (LG) (PF) B Grade (Conventional JIS) for Pipes Plug | Standard Screw Gauge (SG) Whitworth (W) Screw J Class Set Product | Screw Limit Gauge (LG), Metric (M) Screw, Class 3 (Old JIS), Ring | ||||||||||||||||||||||
| From | ₹ 21,801.67 | ₹ 18,458.60 | ₹ 24,426.27 | ₹ 12,271.87 | ₹ 20,588.18 | ₹ 7,901.44 | ₹ 6,201.75 | ₹ 16,702.60 | ₹ 9,104.80 | ₹ 7,112.53 | ₹ 13,726.44 | ₹ 27,206.98 | ₹ 3,897.98 | ₹ 12,104.25 | ₹ 23,927.55 | ₹ 8,569.80 | ₹ 6,870.11 | ₹ 15,367.22 | ₹ 18,766.60 | ₹ 18,766.60 | ₹ 9,479.24 | ₹ 5,118.00 | ₹ 3,089.00 | ₹ 27,921.36 | ₹ 36,240.33 | ₹ 21,365.02 | ₹ 6,296.18 | ₹ 18,646.05 | ₹ 18,888.49 | ₹ 15,367.22 | ₹ 7,779.55 | ₹ 9,214.04 | ₹ 32,486.02 | ₹ 7,901.44 | ₹ 7,597.40 | ₹ 9,479.24 | ₹ 27,993.69 | ₹ 13,726.44 | ₹ 38,272.25 | ₹ 21,452.09 | ₹ 36,570.89 | ₹ 15,663.29 | ₹ 9,418.96 | ₹ 30,786.33 | ₹ 12,211.60 |
| Days to Ship | 6 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 24 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 23 Day(s) or more | 7 Day(s) or more | 23 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more |
| Product Type | Thread Plug Gauge | Thread ring gauge | - | Thread ring gauge | Thread ring gauge | Thread Plug Gauge | Thread Plug Gauge | Thread Plug Gauge | Limit Plug Gauge | Thread Plug Gauge | Thread Plug Gauge | Thread ring gauge | Thread Plug Gauge | - | - | Thread Plug Gauge | Thread Plug Gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread Plug Gauge | Limit Plug Gauge | Thread Pin Gauge | Limit Plug Gauge | Limit Plug Gauge | Thread ring gauge | - | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread Plug Gauge | Thread Plug Gauge | Thread ring gauge | Thread Plug Gauge | Thread Plug Gauge | Thread Plug Gauge | Thread ring gauge / Thread Plug Gauge | Thread Plug Gauge | Thread ring gauge | Limit Plug Gauge | - | - | Thread Plug Gauge | Thread ring gauge / Thread Plug Gauge | Thread ring gauge |
| Nominal | R1-11 ～ R3/8-19 | 4 ～ 8 | 1/8 ～ 3/4 | M1.4X0.3 ～ M60X5.5 | W1-8 ～ W9/16-12 | M1.4X0.3-L ～ M30X3.5-L | M2X0.4 ～ M16X2 | PT1-11 ～ PT7/8-14 | φ3 ～ φ20 | M2X0.4 ～ M36X4 | 2 ～ 20 | 2 ～ 20 | M2 ～ M30 | 1/2 ～ 3/8 | 1/2 ～ 3/8 | No.10-32UNF ～ 7/16-14UNC | NO0-80UNF ～ NO12-24UNC | M1.4X0.3-L ～ M30X3.5-L | PF1-11 ～ PF7/8-14 | PS1-11 ～ PS7/8-14 | PF1-11 ～ PF7/8-14 | φ3 ～ φ20 | M1 ～ M18 | φ10 ～ φ30 | φ10 ～ φ30 | M2 ～ M20 | 1 ～ 50 | PF1-11 ～ PF3/8-19 | SM1/4-40 ～ SM15/64-28 | M2X0.4 ～ M20X2.5 | M1.4X0.3-L ～ M30X3.5-L | M1.4X0.3 ～ M30X3.5 | 1-11-1/2NPT ～ 4-8NPT | M2X0.4 ～ M20X2.5 | M2.6X0.45 ～ M20X2.5 | PF1-11 ～ PS7/8-14 | PF1-11 ～ PS7/8-14 | 2 ～ 20 | 3/4 | φ10 ～ φ30 | 1/2 ～ 3/4 | 0.1155 | PF1-11 ～ PF3/8-19 | W1-8 ～ W7/16-14 | M2X0.4 ～ M16X2 |
| Pitch P | - | 0.7 ～ 1.25 | 14 ～ 28 | - | - | - | - | - | - | - | 0.4 ～ 2.5 | 0.4 ～ 2.5 | 0.35 ～ 3 | 14 ～ 19 | 14 ～ 19 | - | - | - | - | - | - | - | 0.25 ～ 1.75 | - | - | 0.4 ～ 2.5 | - | - | - | - | - | - | - | 0.4 ～ 2.5 | 0.45 ～ 2.5 | - | - | 0.4 ～ 2.5 | Ridge 14 | - | 14 ～ 28 | - | - | - | - |
| Workpiece | - | Male thread | - | - | - | - | - | - | - | - | Female Thread | Male thread | - | - | - | Female Thread | - | - | - | - | - | - | - | - | - | Female Thread | - | - | - | - | - | - | - | Female Thread | Female Thread | - | - | Female Thread | Male thread | - | - | - | - | - | - |
| Class | - | 6g | - | - | - | - | - | - | H7 | - | For JIS Grade 2 Screw | For JIS Grade 2 Screw | Equivalent to Former JIS2 Grade | - | A/B Common ～ B | 2B | - | - | - | - | - | H7 | - | - | - | - | H7 | - | - | - | - | - | - | 6H | 2 | - | - | For JIS Grade 2 Screw | - | - | - | - | - | - | - |
| Standard | - | - | - | - | - | - | - | - | - | - | JIS Standard | JIS Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | JIS Standard | - | - | - | JIS Standard | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Product Type
-
Nominal
- NO0-80UNF
- No.10-32UNF
- No.10-24UNC
- 0.112-Inch models
- 0.1155
- No.12-28UNF
- No.12-24UNC
- 0.164-Inch models
- 0.25-Inch models
- 0.3125-Inch models
- 0.375-Inch models
- No.4-40UNC
- 0.4375-Inch models
- 0.5-Inch models
- No.5-40UNC
- 0.5625-Inch models
- No.6-40UNF
- No.6-32UNC
- 0.6875-Inch models
- No.8-36UNF
- No.8-32UNC
- 1
- 1
- M1
- NO1-72UNF
- NO1-64UNC
- 1-14UNS
- 1-12UNF
- G1-11
- PF1-11
- PS1-11
- PT1-11
- R1-11
- 1-11-1/2NPT
- 1-11-1/2NPTF
- 1-8UNC
- W1-8
- W1-8-L
- W1-7/8-4-1/2
- 1-5/8-8UN
- W1-5/8-5
- 1-5/16-12UN
- PF1-3/4-11
- PS1-3/4-11
- PT1-3/4-11
- 1-3/4-8UN
- 1-3/4-5UNC
- W1-3/4-5
- 1-3/8-12UNF
- 1-3/8-8UN
- 1-3/8-6UNC
- W1-3/8-6
- 1-3/16-12UN
- 1-1/2-12UNF
- G1-1/2-11
- PF1-1/2-11
- PS1-1/2-11
- PT1-1/2-11
- R1-1/2-11
- 1-1/2-11-1/2NPT
- 1-1/2-11-1/2NPTF
- 1-1/2-8UN
- 1-1/2-6UNC
- W1-1/2-6
- 1-1/4-12UNF
- G1-1/4-11
- PF1-1/4-11
- PS1-1/4-11
- PT1-1/4-11
- R1-1/4-11
- 1-1/4-11-1/2NPT
- 1-1/4-11-1/2NPTF
- 1-1/4-8UN
- 1-1/4-7UNC
- W1-1/4-7
- 1-1/8-12UNF
- PF1-1/8-11
- PS1-1/8-11
- 1-1/8-8UN
- 1-1/8-7UNC
- W1-1/8-7
- 1-1/16-12UN
- M1X0.2
- M1X0.25
- 1/2
- 1/2-32UN
- 1/2-20UNF
- 1/2-14NPT
- 1/2-14NPTF
- G1/2-14
- PF1/2-14
- PS1/2-14
- PT1/2-14
- R1/2-14
- 1/2-13UNC
- W1/2-12
- W1/2-12-L
- 1/4
- SM1/4-40
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- W1/4-20
- W1/4-20-L
- G1/4-19
- PF1/4-19
- PS1/4-19
- PT1/4-19
- R1/4-19
- 1/4-18NPT
- 1/4-18NPTF
- 1/8
- SM1/8-44
- SM1/8-40
- W1/8-40
- G1/8-28
- PF1/8-28
- PS1/8-28
- PT1/8-28
- R1/8-28
- 1/8-27NPT
- 1/8-27NPTF
- W1/16-60
- PT1/16-28
- R1/16-28
- 1/16-27NPT
- 1/16-27NPTF
- M1.1X0.2
- M1.1X0.25
- M1.2X0.2
- M1.2X0.25
- 1.4
- M1.4
- M1.4X0.2
- M1.4X0.3
- M1.4X0.3-L
- 1.6
- M1.6X0.2
- M1.6X0.35
- 1.7
- M1.7X0.2
- M1.7X0.35
- M1.7X0.35-L
- M1.8X0.2
- M1.8X0.35
- 2
- 2
- M2
- NO2-64UNF
- NO2-56UNC
- G2-11
- PF2-11
- PS2-11
- PT2-11
- R2-11
- 2-11-1/2NPT
- 2-11-1/2NPTF
- 2-8UN
- 2-4-1/2UNC
- W2-4-1/2
- PF2-1/2-11
- PS2-1/2-11
- PT2-1/2-11
- 2-1/2-8NPT
- 2-1/2-8UN
- PF2-1/4-11
- PS2-1/4-11
- M2X0.25
- M2X0.4
- M2X0.4-L
- M2.2X0.25
- M2.2X0.45
- M2.3
- M2.3X0.25
- M2.3X0.4
- 2.5
- M2.5
- M2.5X0.35
- M2.5X0.45
- M2.5X0.45-L
- 2.6
- M2.6
- M2.6X0.35
- M2.6X0.45
- M2.6X0.45-L
- 3
- 3
- M3
- φ3
- NO3-56UNF
- NO3-48UNC
- PF3-11
- PS3-11
- PT3-11
- 3-8NPT
- 3-8UN
- PF3-1/2-11
- PT3-1/2-11
- 3-1/2-8NPT
- 3-1/2-8UN
- M3X0.35
- M3X0.5
- M3X0.5-L
- M3X0.6
- M3X0.6-L
- 3/4
- 3/4-16UNF
- 3/4-14NPT
- 3/4-14NPTF
- G3/4-14
- PF3/4-14
- PS3/4-14
- PT3/4-14
- R3/4-14
- 3/4-10UNC
- W3/4-10
- W3/4-10-L
- 3/8
- 3/8-32UNEF
- 3/8-24UNF
- G3/8-19
- PF3/8-19
- PS3/8-19
- PT3/8-19
- R3/8-19
- 3/8-18NPT
- 3/8-18NPTF
- 3/8-16UNC
- W3/8-16
- W3/8-16-L
- SM3/16-32
- SM3/16-28
- W3/16-24
- SM3/32-56
- M3.5
- M3.5X0.35
- M3.5X0.6
- 4
- 4
- M4
- φ4
- NO4-48UNF
- NO4-40UNC
- PF4-11
- PT4-11
- 4-8NPT
- 4-8UN
- 4-3/4-8UN
- 4-1/2-8UN
- M4X0.5
- M4X0.7
- M4X0.7-L
- M4X0.75
- M4X0.75-L
- M4.5X0.5
- M4.5X0.75
- 5
- 5
- M5
- φ5
- NO5-44UNF
- NO5-40UNC
- PT5-11
- M5X0.5
- M5X0.75
- M5X0.8
- M5X0.8-L
- M5X0.9
- M5X0.9-L
- 5/8-24UNEF
- 5/8-18UNF
- G5/8-14
- PF5/8-14
- PS5/8-14
- PT5/8-14
- 5/8-11UNC
- W5/8-11
- W5/8-11-L
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- W5/16-18
- W5/16-18-L
- M5.5X0.5
- M5.5X0.75
- M5.5X0.9
- 6
- 6
- M6
- φ6
- NO6-40UNF
- NO6-32UNC
- M6X0.5
- M6X0.75
- M6X1
- M6X1.0
- M6X1-L
- 7
- 7
- M7
- φ7
- M7X0.5
- M7X0.75
- M7X1
- M7X1-L
- 7/8-14UNF
- G7/8-14
- PF7/8-14
- PS7/8-14
- PT7/8-14
- 7/8-9UNC
- W7/8-9
- W7/8-9-L
- 7/16-20UNF
- 7/16-14UNC
- W7/16-14
- 8
- 8
- M8
- φ8
- NO8-36UNF
- NO8-32UNC
- M8X0.5
- M8X0.75
- M8X1
- M8X1.25
- M8X1.25-L
- 9
- 9
- φ9
- M9X0.5
- M9X0.75
- M9X1
- M9X1.25
- M9X1.25-L
- 9/16-18UNF
- 9/16-12UNC
- W9/16-12
- SM9/64-40
- 10
- M10
- φ10
- NO10-32UNF
- NO10-24UNC
- M10X0.5
- M10X0.75
- M10X1
- M10X1.25
- M10X1.25-L
- M10X1.5
- M10X1.5-L
- 11
- φ11
- M11X0.5
- M11X0.75
- M11X1
- M11X1.25
- M11X1.5
- M11X1.5-L
- SM11/64-40
- 12
- M12
- φ12
- NO12-28UNF
- NO12-24UNC
- M12X0.5
- M12X0.75
- M12X1
- M12X1.25
- M12X1.25-L
- M12X1.5
- M12X1.5-L
- M12X1.75
- M12X1.75-L
- 13
- φ13
- M13X0.5
- M13X0.75
- M13X1
- M13X1.25
- M13X1.5
- M13X1.75
- 14
- M14
- φ14
- M14X0.5
- M14X0.75
- M14X1
- M14X1.25
- M14X1.25-L
- M14X1.5
- M14X1.5-L
- M14X2
- M14X2-L
- 15
- φ15
- M15X0.5
- M15X0.75
- M15X1
- M15X1.5
- M15X2
- SM15/64-28
- 16
- M16
- φ16
- M16X0.5
- M16X0.75
- M16X1
- M16X1.25
- M16X1.5
- M16X1.5-L
- M16X2
- M16X2-L
- 17
- φ17
- M17X0.75
- M17X1
- M17X1.5
- 18
- M18
- φ18
- M18X0.5
- M18X0.75
- M18X1
- M18X1.5
- M18X1.5-L
- M18X2
- M18X2.5
- M18X2.5-L
- 19
- φ19
- M19X1
- M19X1.5
- M19X2.5
- 20
- M20
- φ20
- M20X0.5
- M20X1
- M20X1.25
- M20X1.5
- M20X1.5-L
- M20X2
- M20X2.5
- M20X2.5-L
- 21
- φ21
- 22
- M22
- φ22
- M22X0.5
- M22X1
- M22X1.5
- M22X1.5-L
- M22X2
- M22X2.5
- M22X2.5-L
- 23
- φ23
- 24
- M24
- φ24
- M24X0.5
- M24X1
- M24X1.5
- M24X1.5-L
- M24X2
- M24X3
- M24X3-L
- 25
- φ25
- M25X0.5
- M25X1
- M25X1.5
- M25X2
- 26
- φ26
- M26X0.5
- M26X1
- M26X1.5
- M26X1.5-L
- M26X2
- M26X3
- 27
- M27
- φ 27
- M27X1
- M27X1.5
- M27X1.5-L
- M27X2
- M27X3
- M27X3-L
- 28
- φ28
- M28X0.5
- M28X1
- M28X1.25
- M28X1.5
- M28X1.5-L
- M28X2
- M28X3
- 29
- φ29
- 30
- M30
- φ30
- M30X0.5
- M30X1
- M30X1.5
- M30X1.5-L
- M30X2
- M30X3
- M30X3.5
- M30X3.5-L
- 31
- φ 31
- 32
- φ32
- M32X0.5
- M32X1
- M32X1.5
- M32X2
- M32X3
- 33
- M33
- φ33
- M33X1.5
- M33X2
- M33X3
- M33X3.5
- 34
- φ34
- M34X0.5
- M34X1
- M34X1.5
- M34X2
- 35
- φ35
- M35X1.5
- M35X3
- 36
- M36
- φ 36
- M36X0.5
- M36X1
- M36X1.5
- M36X2
- M36X3
- M36X4
- 37
- φ37
- 38
- φ38
- M38X0.5
- M38X1
- M38X1.5
- M38X2
- M38X3
- 39
- M39
- φ39
- M39X1.5
- M39X2
- M39X3
- M39X4
- 40
- φ40
- M40X1
- M40X1.5
- M40X2
- M40X3
- 41
- 42
- M42
- M42X1
- M42X1.5
- M42X2
- M42X3
- M42X4
- M42X4.5
- 43
- 44
- 45
- M45X1
- M45X1.5
- M45X2
- M45X3
- M45X4
- M45X4.5
- 46
- M46X1.5
- 47
- 48
- M48X1
- M48X1.5
- M48X2
- M48X3
- M48X4
- M48X5
- 49
- 50
- M50X1
- M50X1.5
- M50X2
- M50X3
- M52X1.5
- M52X2
- M52X3
- M52X4
- M52X5
- M54X4
- M55X1.5
- M55X2
- M55X3
- M55X4
- M56X1.5
- M56X2
- M56X3
- M56X4
- M56X5.5
- M58X1.5
- M58X2
- M58X3
- M58X4
- M60X1.5
- M60X2
- M60X3
- M60X4
- M60X5.5
- M62X1.5
- M62X2
- M62X3
- M62X4
- M64X1.5
- M64X2
- M64X3
- M64X4
- M64X6
- M65X1.5
- M65X2
- M65X3
- M65X4
- M68X1.5
- M68X2
- M68X3
- M68X4
- M68X6
- M70X1.5
- M70X2
- M70X3
- M70X4
- M70X6
- M72X1.5
- M72X2
- M72X3
- M72X4
- M72X6
- M75X1.5
- M75X2
- M75X3
- M75X4
- M76X1.5
- M76X2
- M76X3
- M76X4
- M76X6
- M78X2
- M80X1.5
- M80X2
- M80X3
- M80X6
- M82X2
- M85X1.5
- M85X2
- M85X3
- M85X4
- M90X1.5
- M90X2
- M90X3
- M90X4
- M90X6
- M95X1.5
- M95X2
- M95X3
- M95X4
- M95X6
- M100X1.5
- M100X2
- M100X3
- M100X4
- M100X6
- M105X2
- M105X6
- M110X2
- M110X3
- M115X2
- M115X4
- M120X2
- M120X3
- M125X2
- M125X4
- M130X2
- M130X3
- M130X6
-
Pitch P
-
Workpiece
-
Class
-
Standard
Related Categories to Plug Gauges / Screw Gauges
-
- Pin Gauges
- Ring Gauges
- Plug Gauges / Screw Gauges
- Hardness-Standard Pieces
- Block Gauges
- Thickness Gauges
- Taper Gauges
- Filler Gauges
- Radius Gauges
- Pitch Gauges
- Angle Gauges
- Drill Gauges
- Welding Gauges
- Chamfering Measurement Gauges
- Microscopic-Organization-Standard Pieces
- Spark-Testing-Standard Pieces
-
Payment Method
- Credit Card
-
- Debit Cart
-
- Net Banking
-
- UPI
-
- Cheque on delivery
-
- Online payment
-
Social Media
MISUMI India Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy
Thank you for your cooperation.
Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.
Privacy Policy