• You can add up to 6 items per a category to the compare list. Compare

  

  angle vise (semicircle)

  ESCO

  [Features]
  ·A precision machine vise
  · Material: cast iron
  ·Angle adjustment: 0 to 90° (with scale)
  ·Jaw capacity: 75 mm / 100 mm
  ·Maximum opening: 75 mm / 100 mm

  From: ₹ 18,700.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  L-Type Clamp (Heavy-Duty Model) Super-Heavy Type

  SUPER TOOL

  [Features]
  · With the heavy-duty model, even securer clamping can be achieved by tightening the hexagonal screw head as far as it will go using a wrench.
  · The maximum tightening pressure when clamping 150 mm is 25.0 kN.
  · The heavy-duty adapter can be tightened to an angle of up to approx. 35°.

  From: ₹ 12,847.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-Clamp (Bahco Type), Carbon Steel (S55C)

  TRUSCO NAKAYAMA

  [Features]
  · A tool that clamps and fixes the workpiece between two opposite surfaces during workpiece machining and assembly work.
  · Used for fixing and holding workpieces during welding or drilling work.

  From: ₹ 1,437.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-Clamp Parts, Screw, Cap, Ring (B Type C-Clamps)

  TRUSCO NAKAYAMA

  [Applications]
  ·Screws caps rings for B type C-Clamp.
  [Materials]
  ·Shaft: Carbon steel (S45C)
  ·Fitting: Carbon steel (S45C)
  ·Grip: Rolled steel for general structure (SS)

  From: ₹ 989.18
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Yankee Vice TV-25·TV-26·TV-27

  ENGINEER

  [Features]
  · The back and both of the sides are machined to right angles, so it can be placed vertically or horizontally.
  · With special jaws allowing you to clamp thin plates, cylindrical rods, squared timber and more.
  · Turning the jaws over allows them to be used as flat jaws.
  [Applications]
  · Gripping items strongly and continuously; securing workpieces.

  From: ₹ 8,918.95
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Parallel Block Set

  NABEYA

  [Features]
  · The 4 sides excluding the end faces have undergone finishing grinding and are machined in pairs.
  · S50C type hardened to HRC46-53 with improved wear resistance.
  · Comes inside a strong wooden storage case.
  · Also sold separately.
  · By using a high-precision parallel block to find the parallelism, precision machining can be performed while preventing the workpiece from floating

  From: ₹ 52,050.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Modular Machine Vise

  GERARDI

  [Features]
  ·A steel modular vise with high-precision components within 0.02 mm.
  ·The vise mouthpiece's automatic pull-down mechanism prevents the workpiece from lifting.
  ·Attached to a milling machine, it is mainly used for roughing and finishing.

  From: ₹ 115,678.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  

  

  Precision Vise (for ultra-precision machining)

  SUPER TOOL

  [Features]
  · A precision vise for ultra-precision finishing.
  · Can be utilized for a wide range of grinding, cutting, and drilling.
  · The round object machining V-groove (G) is attached to the crosswise direction of the mobile jaw, or the lengthwise/crosswise direction (SPV80-150).
  · Sub-zero treatment minimizes aging deterioration.

  From: ₹ 166,715.71
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Vise Mounting Bolt Set【3 Pieces Per Package】

  NABEYA

  Provided as a set for vise mounting. A set that includes 3 bolts, 3 flat washers, and 3 spring washers.

  From: ₹ 503.88
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Stainless Steel C-Clamp Vise (Bahco Type)

  TRUSCO NAKAYAMA

  [Features]
  · Made of rust/corrosion resistant SUS304.
  · A tool that clamps and fixes the workpiece between two opposite surfaces during workpiece machining and assembly work.
  · Bar code type.
  [Applications]
  · For tightening objects in food factories, plating factories and chemical factories.

  From: ₹ 3,825.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Fixture For The Metal Hold-Down Clamp

  MURATEC KDS

  [Features]
  · Mount on a metal hold-down clamp to enable use as a simple vise.
  

  From: ₹ 958.07
  Days to Ship: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini Vise

  HOZAN

  [Features]
  A vise for holding during drilling.
  ·Jaw capacity: 50 mm
  ·Maximum jaw capacity: 33 mm
  ·Size: 50 × 105 × 35 mm
  ·For K-21/K-50
  Trusco Code: 810-7606

  From: ₹ 2,744.00
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Rotary Bench Vise Handle Shaft

  TRUSCO NAKAYAMA

  [Specifications]
  ·For rotary bench vise
  ·Please select according to the compatible model.

  From: ₹ 1,067.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Arbor press (rack type) Maximum press thickness 110/155 mm type

  ESCO

  [Features]
  ·Both punch and press are possible by reversing ram.
  ·Included 3 types of ram attachments
  ・ It is made of cast iron

  From: ₹ 18,079.15
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C Clamp

  NABEYA

  [Features]
  · It is for light work in steel-plate pressing.
  · Lower price with mass production.
  · The handle is unichrome plated.

  From: ₹ 458.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Vise (Handle Type)

  TRUSCO NAKAYAMA

  [Features]
  · High precision machining can be performed in a speedy manner.
  · Both vertical and horizontal aspects can be used, since the product is precision polished on four sides.
  · Excellent squareness and parallelism enable super-precise processing.
  [Applications]
  · It is secured to an electromagnetic chuck and used in precision machining.

  From: ₹ 28,987.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Bench Vises

  Ｍ＆Ｍ

  Rotates 360° for superior workability. Equipped with a large anvil to facilitate striking work. Robust cast iron

  From: ₹ 8,388.42
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C Clamp CL Series

  GISUKE

  [Specifications]
  ·For welding, drilling, and bonding work.
  ·Rotate the handle included to the main body to clamp and fix the object with the bolt.

  From: ₹ 204.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C Type Screw Clamp Powerful Type

  LOBTEX

  Clamp for attaching, fixing and holding materials.
  [Features]
  · A powerful type with excellent load resistance.
  · Approximately twice the jaw depth of the B type.
  · Can securely clamp locations with depth.
  · With handle.
  [Application]
  · Optimal for clamping and installing heavy objects.

  From: ₹ 4,841.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Heavy Duty C-Clamp 100 mm

  TAKAGI

  [Applications]
  · For fixing such as welding, drilling and adhesive work
  [Specifications]
  · Max. opening width: approx. 100 mm

  From: ₹ 1,065.99
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Sign Vise VC100

  JAPAN AUTOMATIC MACHINE

  It has been designed such that the clamp handle is underneath the workpiece.

  From: ₹ 284,965.04
  Days to Ship: 15 Day(s) or more

  15 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Clamp Master Vise Handle

  NABEYA

  [Features]
  Handle parts for clamp master vise.
  Compliant models are EVS, ETS, EPA, ETPA-75-3 (ETS75-HN), EVS, ETS, EPA, ETPA-100-4 (EVS75-HN), EVS, EPA-150-6 (EVS150-HN), EVS200-8 (EVS200-HN).

  From: ₹ 1,427.16
  Days to Ship: 12 Day(s) or more

  12 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Engineer's Vise (Square Shaft) Handle

  TRUSCO NAKAYAMA

  [Specifications]
  ·For lateral vise
  ·Please select according to the compatible model.

  From: ₹ 1,457.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Anvil Vise with Rotary Bench (Rectangular Body Shaft)

  TRUSCO NAKAYAMA

  [Features]
  · The main body is made of carbon steel cast steel, robust and long lasting.
  · The turntable can rotate 360°.
  · With anvil for better striking work and shock resistance.
  [Applications]
  · It can be used for work that involves striking.
  · Since it rotates 360°, work can be performed at any angle.

  From: ₹ 10,697.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling Vise

  TRUSCO NAKAYAMA

  [Features]
  · Durable and tough design for each part.
  · Attaches to milling machines and is mainly used for rough machining.

  From: ₹ 32,252.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pipe Grip Pliers

  GRIPONTOOLS

  [Features]
  · Epoxy resin coating makes it at least 10 times more resistant to corrosion than nickel plated parts.
  · Ideal for holding round tubes such as pipes.
  · Clamping shape enables visual observation of welded parts during work.
  [Applications]
  · For plate metal, welding work.

  From: ₹ 4,382.89
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  F Type Deep Clamp Type Parts

  TRUSCO NAKAYAMA

  F type clamp deep type parts.
  [Features]
  ·Country of manufacture: Japan.
  ·normal type pad.

  From: ₹ 429.49
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parts for C-Clamp, Cap, Ring (B Type C-Clamps)

  TRUSCO NAKAYAMA

  [Specifications]
  ·Cap ring for B-type C-Clamp.
  ·Tip of screw is spherical.

  From: ₹ 405.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Locking pliers (C clamp) swivel type

  LOCKJAW

  [Features]
  · Automatically adjusts from thin to thick items to clamp securely.
  · Multi-functional pliers for a wide range of grasping work.
  · It includes a swivel.
  · Resolves all issues associated with conventional locking pliers and improves working efficiency.
  · The efficiency dramatically improves.

  From: ₹ 6,489.58
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  75, 125, 150 mm bench vice (With Turntable)

  ESCO

  【Product Specifications】
  ・120 degrees rotating base.
  ・Material-Cast iron
  ・Jaw width-125
  ・Max. opening-125mm
  ・Weight-19.0kg
  ・Overall length…40mm
  ・Overall height…19.5mm

  From: ₹ 8,270.62
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Hand Press (Cam Type)

  ESCO

  [Features]
  ·Because of cam type, large amount of pressure can be obtained.
  ·Ideal for punching dies, etc.
  ·Handle can be attached either left or right<EA525X-8>
  ・ It is made of cast iron

  From: ₹ 29,034.18
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Quick Release Bar Clamp

  MURATEC KDS

  [Features]
  · Quick, single action strong clamping (200 kg)
  · Robust metal body
  · Carpentry work (fittings, furniture, hobby work)
  · Construction work, 2 × 4 construction, metal machining
  · Robust metal bar that does not bend easily
  

  From: ₹ 3,557.84
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pull Down Vise【2 Pieces Per Package】

  NABEYA

  Handles small mouth openings caused by defects in machine vise, milling vise, shaper vise, or similar. Can grasp without restriction by matching up the table of the planar, shaper, milling cutter, or horizontal boring machine, etc., and the workpiece. The workpiece can be prevented from rising up with strong clamping as it is pulled down while clamped. Thanks to the use of specially made ductile iron, the body is damage-proof.

  From: ₹ 22,553.98
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Loctite CV Precision Machine Vise

  NABEYA

  The opening is nearly doubled compared with vises of the same class. Equipped with a pressure replenishment mechanism which does not disturb the operation when the pressure drops, enabling cutting fluid or fine chips in the body to be ejected from the blow hole using the chip blow mechanism. For the mechanical type, the handle can be operated even on the fixed clamp side. The LTCV-TH is a hydraulic internal type with a specification in which the handle is operated from the fixed clamp side.

  From: ₹ 159,586.51
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Machine Vise K-26

  HOZAN

  [Features]
  A vise for holding during drilling.
  ·Jaw capacity: 50 mm
  ·Maximum jaw capacity: 30 mm
  ·For K-16/280
  Trusco Code: 810-7574

  From: ₹ 4,250.05
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Yankee Vise

  TRUSCO NAKAYAMA

  [Features]
  · Very strong, made of steel casting.
  · The portion that slides with the base unit is made in parallel form.
  · The product can be used vertically or horizontally.

  From: ₹ 8,696.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  L Type Clamp (GZ Type)

  BESSEY

  [Features]
  ·A speed clamp with an arm that slides up and down for instant tightening.
  [Applications]
  ·For woodworking, furniture, sheet metal, and DIY.

  From: ₹ 3,246.64
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Click Clamp (One-Touch)

  BESSEY

  [Features]
  ·Because the jaw is made of magnesium, it is extremely light.
  ·The handle is a ratchet type and can be tightened with one touch.
  [Applications]
  ·For woodworking, light industry, stone industry and DIY.

  From: ₹ 3,295.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Forged C-Type Clamp

  GISUKE

  [Features]
  ·Heavy-duty tightening with wrench or spanner
  [Applications]
  ·For welding, drilling and gluing work

  From: ₹ 556.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-Clamp, Bahco Type (Replaceable)

  LOBTEX

  Screw clamp opening can be adjusted by bolt to fix objects of various thicknesses.
  [Features]
  · The swivel angle of the dish can be replaced at 20° (excluding 25/38 mm).
  · Exhibits the toughness of special steel thanks to a thorough heat treatment.
  · Precise forging provides forging strength sufficient for long-term use.
  · The high-accuracy square screws generate less rattling and enable smooth opening/closing.
  [Application]
  · For attaching, fixing and holding materials.

  From: ₹ 1,623.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  B Type Giant Clam Vise Stainless Steel

  LOBTEX

  A stainless steel B-type mantis clamp vise that is ideal for environments where there is a risk of salt damage, such as food, marine, and pharmaceuticals.
  [Features]
  ·The body uses SUS329JI.
  ·SUS304 is used for the plate and screws.
  ·Rust resistant salt spray test for 120 consecutive hours with no abnormalities.
  [Applications]
  · For attaching, fixing and holding materials.
  ·For food, marine, and pharmaceutical factories.
  ·Ideal for environments where there is a risk of salt damage.

  From: ₹ 4,030.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tools for Sheet Metals

  KTC(KYOTO TOOL)

  It is convenient for bending work and temporary fixing.

  From: ₹ 2,768.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  L-shaped clamp (for woodworking)

  TRUSCO NAKAYAMA

  The lightest and most inexpensive one-touch clamp for DIY. Light and features excellent tightening force.

  From: ₹ 1,413.64
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-Clamp Vise (Heavy Duty Wide Type) - Cation Electrodeposition Coating

  SUPER TOOL

  Deep and powerful type. A handle is supplied for rapid tightening, and the hex head enables even more secure turning with the use of wrenches.

  From: ₹ 3,528.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-Clamp Parts, Screw, Cap, Ring (C Type C-Clamps)

  TRUSCO NAKAYAMA

  [Applications]
  · Screw/cap/ring for C type giant clam vise.

  From: ₹ 1,751.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	ESCO	SUPER TOOL	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	ENGINEER	NABEYA	GERARDI	SUPER TOOL	NABEYA	TRUSCO NAKAYAMA	MURATEC KDS	HOZAN	TRUSCO NAKAYAMA	ESCO	NABEYA	TRUSCO NAKAYAMA	Ｍ＆Ｍ	GISUKE	LOBTEX	TAKAGI	JAPAN AUTOMATIC MACHINE	NABEYA	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	GRIPONTOOLS	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	LOCKJAW	ESCO	ESCO	MURATEC KDS	NABEYA	NABEYA	HOZAN	TRUSCO NAKAYAMA	BESSEY	BESSEY	GISUKE	LOBTEX	LOBTEX	KTC(KYOTO TOOL)	TRUSCO NAKAYAMA	SUPER TOOL	TRUSCO NAKAYAMA
Product Series	angle vise (semicircle)	L-Type Clamp (Heavy-Duty Model) Super-Heavy Type	C-Clamp (Bahco Type), Carbon Steel (S55C)	C-Clamp Parts, Screw, Cap, Ring (B Type C-Clamps)	Yankee Vice TV-25·TV-26·TV-27	Precision Parallel Block Set	Precision Modular Machine Vise	Precision Vise (for ultra-precision machining)	Vise Mounting Bolt Set【3 Pieces Per Package】	Stainless Steel C-Clamp Vise (Bahco Type)	Fixture For The Metal Hold-Down Clamp	Mini Vise	Rotary Bench Vise Handle Shaft	Arbor press (rack type) Maximum press thickness 110/155 mm type	C Clamp	Precision Vise (Handle Type)	Bench Vises	C Clamp CL Series	C Type Screw Clamp Powerful Type	Heavy Duty C-Clamp 100 mm	Precision Sign Vise VC100	Clamp Master Vise Handle	Engineer's Vise (Square Shaft) Handle	Anvil Vise with Rotary Bench (Rectangular Body Shaft)	Milling Vise	Pipe Grip Pliers	F Type Deep Clamp Type Parts	Parts for C-Clamp, Cap, Ring (B Type C-Clamps)	Locking pliers (C clamp) swivel type	75, 125, 150 mm bench vice (With Turntable)	Hand Press (Cam Type)	Quick Release Bar Clamp	Pull Down Vise【2 Pieces Per Package】	Loctite CV Precision Machine Vise	Machine Vise K-26	Yankee Vise	L Type Clamp (GZ Type)	Click Clamp (One-Touch)	Forged C-Type Clamp	C-Clamp, Bahco Type (Replaceable)	B Type Giant Clam Vise Stainless Steel	Tools for Sheet Metals	L-shaped clamp (for woodworking)	C-Clamp Vise (Heavy Duty Wide Type) - Cation Electrodeposition Coating	C-Clamp Parts, Screw, Cap, Ring (C Type C-Clamps)
From	₹ 18,700.00	₹ 12,847.87	₹ 1,437.16	₹ 989.18	₹ 8,918.95	₹ 52,050.75	₹ 115,678.82	₹ 166,715.71	₹ 1,511.64	₹ 3,825.44	₹ 958.07	₹ 2,744.00	₹ 1,067.24	₹ 18,079.15	₹ 458.25	₹ 28,987.78	₹ 8,388.42	₹ 204.47	₹ 4,841.95	₹ 1,065.99	₹ 284,965.04	₹ 1,427.16	₹ 1,457.78	₹ 10,697.60	₹ 32,252.00	₹ 4,382.89	₹ 429.49	₹ 405.24	₹ 6,489.58	₹ 8,270.62	₹ 29,034.18	₹ 3,557.84	₹ 45,107.96	₹ 159,586.51	₹ 4,250.05	₹ 8,696.36	₹ 3,246.64	₹ 3,295.53	₹ 556.73	₹ 1,623.87	₹ 4,030.76	₹ 2,768.33	₹ 1,413.64	₹ 3,528.38	₹ 1,751.80
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	13 Day(s) or more	7 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	15 Day(s) or more	12 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	9 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more

Loading...