(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.
Lathe Jigs（Type：Soft Jaw Molding Jig / Soft Jaw Molding Holder）
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
4 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
KAWASHIMO
[Features]
·Soft jaw forming setup can be completed within one minute. Machining is completed in a short time. Even inexperienced users can perform centering with a single touch. Core runout accuracy is improved to 10 microns.
·It also increases your grasping power.
·No jigs such as cores, rings, etc. are required.
·Tightening margin can be freely adjusted by simply rotating the chuck mate to the left or right.
·On NC lathes, it does not interfere with permanent tooling, and caliper measurements can be taken while the caliper is still attached.
·It is lightweight, easy to handle, has a simple structure, and can be used for a long time.
·Grip chuck, tension chuck, and pass-through molding can all be done easily with this one tool.
·The bolt hole of the soft jaw is used for the hole for inserting the stop pin. No need to drill taps or extra holes.
·All you have to do is insert 3 set pins into the spot facing holes of the soft jaw mounting holes, tighten the chuck (open the tension chuck), and you are ready to go!
[Applications]
·Applies to soft jaw forming holders for chuck work.Type Mounting type Compatible Chuck Nominal Size Jaw Height(mm) Compatible Manufacturer Chuck Outer Diameter(mm) Number of Jaws Shank MT No Tip Carbide Insert (Y/N) Tip Width Across Flat(mm) Auxiliary Jig Type Soft Jaw Molding Jig / Soft Jaw Molding Holder - 6 ～ 12 - - 152.4 ～ 304.8 - - - - - From: ₹ 22,808.07 Days to Ship: 5 Day(s) or more 
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Soft-Jaw Molding Tool For JB-TYPE Hydraulic/Pneumatic Chucks
GIGA SELECTION
[Features]· Soft jaw molding tool for 3-jaw chucks with which soft-jaw molding can be implemented under the same conditions as when chucking workpieces, improving center runout precision and also enhancing gripping force. · Can be used for each manufacturer's hydraulic/pneumatic chucks.
Type Mounting type Compatible Chuck Nominal Size Jaw Height(mm) Compatible Manufacturer Chuck Outer Diameter(mm) Number of Jaws Shank MT No Tip Carbide Insert (Y/N) Tip Width Across Flat(mm) Auxiliary Jig Type Soft Jaw Molding Jig / Soft Jaw Molding Holder - 4 ～ 15 - - - - - - - - From: ₹ 19,065.38 Days to Ship: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
Not quenched and can be easily processed according to the workpiece diameter. Available at an affordable price.
Type Mounting type Compatible Chuck Nominal Size Jaw Height(mm) Compatible Manufacturer Chuck Outer Diameter(mm) Number of Jaws Shank MT No Tip Carbide Insert (Y/N) Tip Width Across Flat(mm) Auxiliary Jig Type Soft Jaw Molding Jig / Soft Jaw Molding Holder - 5 ～ 15 - - - - - - - - From: ₹ 11,574.19 Days to Ship: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Soft Jaw Molding Tool For TL-TYPE Hydraulic/Pneumatic Chucks
GIGA SELECTION
[Features]· Economical molding tool that allows molding of soft jaws for multiple chuck sizes on one tool. · Soft jaw molding can be implemented under the same conditions as when chucking workpieces, improving center runout precision and also enhancing gripping force. · The molding tool jaw is interchangeable between a forward direction and backward direction, providing a wide adjustment range.
Type Mounting type Compatible Chuck Nominal Size Jaw Height(mm) Compatible Manufacturer Chuck Outer Diameter(mm) Number of Jaws Shank MT No Tip Carbide Insert (Y/N) Tip Width Across Flat(mm) Auxiliary Jig Type Soft Jaw Molding Jig / Soft Jaw Molding Holder - 5～8 ～ 8～12 - - - - - - - - From: ₹ 43,579.89 Days to Ship: 8 Day(s) or more
8 Day(s) or more
| Brand |
|---|
| Product Series |
| From |
| Days to Ship |
| Type |
| Mounting type |
| Compatible Chuck Nominal Size |
| Jaw Height(mm) |
| Compatible Manufacturer |
| Chuck Outer Diameter(mm) |
| Number of Jaws |
| Shank MT No |
| Tip Carbide Insert (Y/N) |
| Tip Width Across Flat(mm) |
| Auxiliary Jig Type |
You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | |
| Brand | KAWASHIMO | GIGA SELECTION | MISUMI | GIGA SELECTION |
| Product Series | Soft-Jaw Molding Tool For JB-TYPE Hydraulic/Pneumatic Chucks | Soft Jaw Molding Tool For TL-TYPE Hydraulic/Pneumatic Chucks | ||
| From | ₹ 22,808.07 | ₹ 19,065.38 | ₹ 11,574.19 | ₹ 43,579.89 |
| Days to Ship | 5 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more |
| Type | Soft Jaw Molding Jig / Soft Jaw Molding Holder | Soft Jaw Molding Jig / Soft Jaw Molding Holder | Soft Jaw Molding Jig / Soft Jaw Molding Holder | Soft Jaw Molding Jig / Soft Jaw Molding Holder |
| Mounting type | - | - | - | - |
| Compatible Chuck Nominal Size | 6 ～ 12 | 4 ～ 15 | 5 ～ 15 | 5～8 ～ 8～12 |
| Jaw Height(mm) | - | - | - | - |
| Compatible Manufacturer | - | - | - | - |
| Chuck Outer Diameter(mm) | 152.4 ～ 304.8 | - | - | - |
| Number of Jaws | - | - | - | - |
| Shank MT No | - | - | - | - |
| Tip Carbide Insert (Y/N) | - | - | - | - |
| Tip Width Across Flat(mm) | - | - | - | - |
| Auxiliary Jig Type | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Type
- Soft Jaw
- Soft Jaw Molding Jig / Soft Jaw Molding Holder
- Lathe Chuck
- Rotation Center / Lathe Center
- Scroll Chuck Handle
- Jaw Nut
- Tailstock / Auxiliary Jig
-
Mounting type
- Serrated Type
- Upper and Lower Divided Jaw Type
-
Compatible Chuck Nominal Size
- B-212
- B-210
- B-208
- B-206
- B-205
- B-21
- B-15
- B-12
- B-10
- B-08
- B-06
- 4
- 5
- Type B 05
- Type HJ 5
- 5、6、8
- 5～8
- 6
- Type B 06
- Type GO 6
- 6、8、10
- 6～10
- 7
- 7・8
- 8
- Type B 08
- Type H 8-46
- 8、10、12
- 8～12
- 9
- 9・10
- 10
- Type B 10
- Type GO 10
- Type H 10-67
- 12
- Type B 12
- Type HJ 12
- 14～16
- 15
- Type B 15/18
- 15～22
- 16
- 18
- 21
- Type B 21/24
- Type HJ 24
- 80
- 110
- 130
- 140
- 160
- 165
- 200
- Type B 204/205
- Type B 206
- Type B 208
- Type B 210
- Type B 212
- Type B 215
- 250
- 385
- 400
- 460
- 500
-
Jaw Height(mm)
-
Compatible Manufacturer
- Kitagawa
- Howa
- Nikko
- Matsumoto
- Hitachi
- Victor
- Other
-
Chuck Outer Diameter(mm)
-
Number of Jaws
-
Shank MT No
-
Tip Carbide Insert (Y/N)
- Yes
- N/A
-
Tip Width Across Flat(mm)
-
Auxiliary Jig Type
- Die Holder
- Dog
Related Categories to Lathe Jigs
Payment Method
- Credit Card
-
- Debit Cart
-
- Net Banking
-
- UPI
-
- Cheque on delivery
-
- Online payment
-
Social Media
MISUMI India Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy
Thank you for your cooperation.
Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.
Privacy Policy